How to Make a Paper Butterfly

How to Make a Paper Butterfly.

Paper butterflies are not only dainty and chic, they're also fun to make. Try your hand at origami to create one or, if you're more of a crafting beginner, fold a simpler version with pretty pleats. When you're finished, use your butterflies as decor or give them to friends and family as gifts.

Method 1 Folding an Origami Butterfly.

1. Fold the paper in half, then open it and fold it in half the other way. Make sure to crease both of the folds. Line up the edges when you’re folding to ensure the crease is directly in the center.

If your paper is the same color or pattern on both sides, it doesn’t matter which side you start on. However, if one side is white, or the “backside,” begin with that side facing up.

Choosing the Perfect Paper for Your Butterfly

If you're a beginner, choose oversized origami paper. Bigger sheets are easier to work with.

For easy folding, use origami paper, because it is thinner than regular paper.

If you want to add visual interest, opt for textured paper like linen or felt cardstock.

For a dramatic accent, pick foil paper in a shimmery metallic.

2. Fold the paper in half diagonally, open it, and fold on the other diagonal. Bring 2 opposite corners together to create the folds. Press down firmly to create defined creases. Repeat on both diagonals. Open the paper to lie flat after you fold it.

Your 4 folds should intersect in the exact center of the paper.

3. Bring the right and left creases together, creating a triangle. With the paper laying flat in front of you, press the right horizontal crease to the left one. As you do this, the paper should collapse onto itself in a triangle shape along the diagonal creases you made.

Press down on the triangle to crease the paper once it’s collapsed.

If the paper isn’t folding properly, go back over your original creases again. If they aren’t defined enough, the paper will have trouble falling into the shape.

4. Fold the 2 top corners into the center. When you created the triangle shape, it made 2 layers. Grab the corners on the top layer and line up their edges with the crease in the middle of the triangle.

Try to align the corners with the crease perfectly so they aren’t overlapping or so there isn’t a large gap between the edges in the center.

5. Flip the triangle over and fold the bottom up, leaving a small tip showing. You aren’t folding it completely half. Instead you’re folding it about 1/3 up from the base of the triangle. Hold the fold in place gently with your hand.

Don’t crease the fold.

6. Bend the top layer of the tip over the base. There are 2 layers at the tip of the triangle. Peel the top 1 forward, folding it over the wide triangle bottom you’re currently holding in place. The tip will be the head of the butterfly.

Crease the fold that you make with the tip. This will help secure the body of the butterfly in place and prevent it from unraveling.

7. Pull down the pieces from the bottom layer to create the lower wings. With the top layer folded over, bring the bottom layer of the tip in the opposite direction. The points of the 2 triangular pieces should be facing down, away from the folded head.

It may help to hold the folded tip with your thumb while you pull the other pieces down so that the butterfly doesn’t come apart.

Re-crease the folded tip after you arrange the bottom pieces if necessary.

Trim the edges of the wings if you want a smaller butterfly.

Method 2 Making a Pleated Paper Butterfly.

1. Fold the square piece of paper in half, creasing it. Line up the edges of the paper when you fold it to make sure you’re creating a line directly down the middle. Press firmly with your fingernail to form the crease.

Use any type of paper you’d like, whether it’s origami paper, colorful cardstock, or even pretty gift wrap.

The size of your paper doesn’t matter, as long as it’s square. If you have a rectangular piece, simply trim it down so all of the edges are the same length.

2. Unfold the paper and cut along the crease line. Use your scissors to cut the piece of paper in half. The groove of the crease should help guide your scissors in a straight line through the paper.

Make sure your scissors are sharp so they don’t tear or crinkle the paper.

If you have trouble cutting in a line, hold your scissors against a straight edge, like a ruler, while you cut.

3. Make accordion folds with one of the pieces of the paper. Fold a small piece lengthwise, then flip the paper over to fold it back onto itself. Continue flipping the paper from side to side as you fold along the entire length of the paper. Think of this motion as similar to making a pleat or a fan.

You can make the folds as thick or as thin as you'd like.

Keep the folds all the same thickness, no matter what size you choose.

4. Take the other piece of paper you cut and fold it in half lengthwise. Place the 2 longer edges on top of each other. Then create a crease by pressing down along the fold.

Try to make the crease as straight and even as possible so it splits the paper directly in half.

5. Open it up and fold the 4 corners in toward the center crease line. Line up the edges straight along the crease. Your paper will now be in the shape of a hexagon, with 2 pointed ends formed by the folded corners.

Leave the corners folded. If they won’t stay in place, use a piece of double-sided tape or a little bit of glue under the flap.

6. Flip the paper over and make accordion folds on each side of the crease. Fold one half the paper in towards the center. Then repeat on the other side. This will be the top half of the butterfly’s wings.

Make the folds as large or as small as you’d like, depending on the size of your paper.

7. Bend both pieces of pleated paper in half. Press the pleats together and hold the paper between your thumb and forefinger. Carefully fold one end onto the other, creasing it firmly.[14]

The paper won’t stay folded, but that’s okay. You just want to make a crease, so the paper is in a V-shape.

8. Place 1 piece above the other and tie them together at the center. Arrange the 2 pieces so that they form a butterfly shape. Pinch them together while you tie string or cord around both pieces.[15]

To secure the 2 pieces together better, you can add a dab of craft glue or hot glue in the middle.

Having a friend hold the pieces together while you tie the string makes it easier to get a tight knot.

You can also use ribbon or a pipe cleaner instead of string.

9. Pull out the pleats to open up the wings. Scrunched-up folds don’t exactly resemble a beautiful butterfly. Gently pull the pleats apart so that the 2 pieces of paper look like 1 large wing on each side instead of 2 disjointed ones.[16]

Be careful not to rip the paper when you’re arranging the pleats.

Fun Ways to Use Your Butterflies

Hang them on a string or ribbon to drape as a whimsical garland in your room.

Glue the butterflies to a piece of paper or a canvas as 3D art.

Give them as gifts around the holidays.

Place them on a bookshelf or coffee table as decor.

Turn a butterfly into a Christmas tree ornament.

Things You’ll Need

Origami Butterfly

1 square piece of paper

Pleated Paper Butterfly

1 square piece of paper

1 piece of string, cord, or ribbon

Scissors

Double-sided tape (optional)

Glue (optional)

Desember 16, 2019

how to make 3d paper clouds

How to Make 3D Paper Clouds.

There are few things as relaxing and inspiring as clouds, but you can't always go outside to look at them. Make a hanging cloud to enjoy the sight of the sky anytime you’re stuck indoors.

1. Draw a basic cloud shape on thick cardboard. Use a pencil or marker to draw a simple cloud shape onto thick cardboard. This will serve as your template. Draw the cloud the same size you want the finished product to be.

If you need a little guidance for sketching the cloud, run a Google image search using the search term "cloud shape." Tons of options will come up for you to choose from!

2. Cut the cloud shape out of the cardboard. Use sharp scissors or an X-ACTO knife to cut along the lines you drew. Cut your cloud template out completely. Discard the excess cardboard.

3. Trace around the cloud template on thick white card stock. Pick a heavy stock so your 3D clouds are fairly durable. Trace around the cloud template on two sheets of the heavy white stock. Use a pencil and sketch lightly so you won't leave any dark marks on your white paper.

4. Cut out each white cloud shape carefully. Use scissors or an X-ACTO knife to cut out the cloud shapes. Cut just inside the drawn line so that your shapes won't have any visible pencil marks around the edges.

Lightly erase any pencil marks that accidentally make it onto the final shapes. Be careful not to bend the edges of the paper as you do so!

5. Add a thin stripe of hot glue down the center of one cloud. Heat up your hot glue gun. Place one cloud shape on the table in front of you. Then, draw a thin line of hot glue directly down the center of one of the cloud shapes.

6. Place a length of fishing line directly into the glue. Cut a piece of fishing line at the length you want to hang your 3D cloud. It can be as long or as short as you like. Anywhere from 6 to 18 inches (15 to 45 cm) would work great. Place the line vertically, directly into the line of glue.

There should be no fishing line dangling under the cloud; it should only extend from the top. You will use this to hang the cloud.

Make sure you're using fishing line, which is transparent. That way, when you hang the cloud, it will look like it's floating in the air. Avoid fishing wire.

7. Fold another cloud shape right down the center. Set the glued cloud aside for a moment. Take another white cloud shape and fold it in half horizontally. The crease should appear in the same place as the glue stripe on the first cloud -- right down the middle.

8. Place the folded edge into the hot glue. Once folded, line up the creased edge of the second cloud with the stripe of glue on your first cloud. Press the edge into the glue, right on top of the fishing line. Hold it in place for about 30 to 60 seconds to ensure you get a solid bond.

You may need to add some fresh hot glue if yours has dried up. Simply add a very thin line of it in the same place.

9. Hang the cloud by the string. You can hang you 3D cloud anywhere you like! Use the fishing line to tie it to a light fixture, ceiling hook, the cord of a ceiling fan, or anywhere else you please.

10Make multiple clouds. You don't have to stop at one cloud! Repeat these steps to create multiple clouds. Cut the fishing line at different lengths so the clouds will hang at different levels. You can also place more than one cloud on a string for a stacked effect.

Remember, each 3D cloud is made from two white cloud shapes. If you want your mobile to have six 3D clouds, you'll need to cut out 12 cloud shapes from the white card stock.

11. Glue the strings around the inside edge of an embroidery hoop (optional). An embroidery hoop is circular, so it's perfect for a mobile. Let the clouds dangle at different lengths, but make sure all the strings extend from the top of the hoop at the same length. You'll use the strings extending from the top to hang your mobile.

Once the glue is dry, gather together the strings at the top. Create a knot to lock them altogether. Suspend the mobile by the knotted string wherever you like!

If you've never seen an embroidery hoop before, it's a small wooden ring used for needlepoint and other sewing projects. It can be found at any craft or sewing store. It will also have a tiny metal tightening device on it, but you won't need that for this purpose.


Things You'll Need.

Thick cardboard.

Thick white card stock.

Scissors or an X-ACTO knife.

Hot glue gun.

Hot glue sticks.

Fishing line.

Embroidery hoop.

Ceiling hooks.


Tips.

Make a few clouds if you like the outcome; a ceiling with several clouds can look really awesome.

Consider painting your paper lantern with glow-in-the-dark paint first. Your cloud will have a subtle glow.

Don't over-fluff your cloud. If you pull on the stuffing too much, it will lose its shape and fall apart.

If you do felting, you can also make a fluffy cloud by felting a ball and putting some of the excess wool around it.

Warnings.

Polyester stuffing is flammable. Do not put clouds near any heat source (lamps, ceiling lights, etc.).

November 30, 2019

how to making a long necked 3d dino

How to Making a Long-Necked 3D Dino.

With the right supplies and a bit of time, you can make your very own paper dinosaur that stands or moves. If you'd like a bigger craft project, you could even attempt a paper mache dinosaur or an origami dinosaur! Depending on the colors that you use, you can make your dinosaur look realistic or cartoonish.

Steps.

1. Fold and cut a plain white paper plate in half with scissors. Fold the plate in half first, then use the crease as a cutting guide. For best results, use the kind that's made from cardstock and has a frilled edge, rather than the kind that's made from thick cardboard with a rim.

Set aside 1 of the paper plate halves; this will make the body.

2. Cut a dino head, tail, and spikes from the other paper plate half. Draw the shapes on the second paper plate half (the other one will be the body), then cut them out. Make sure that the limbs are proportionate to the body. Don't worry about the feet; you will be using toilet paper rolls for that.

Make the spikes about 1 in (2.5 cm) tall and wide.

Make the tail about 1 to 2 in (2.5 to 5.1 cm) wide at the base, and about 1/2 to 2/3 the length of the paper plate.

If you don't know how to draw a dinosaur head, tail, or spikes, look at pictures of cartoon dinosaurs online or in coloring books.

Use the brim to make the neck, if desired. Cut it off first so that you get a C-shape, then cut it in half. Use 1 of these halves to make the neck.

3. Glue the cut shapes to the other paper plate half. The straight edge of the plate is the bottom of the dinosaur, while the curved side is the back. Glue the tail to 1 end and the neck and/or head to the other. If you made spikes, glue them down the dinosaur's back.

4. Use scissors to cut an empty toilet paper roll into thirds. Keep 2 of the segments and discard the third. This will give you rings that are a little over 1 in (2.5 cm) tall. If you don't have any empty toilet paper rolls, you can use an empty paper towel roll instead.

If you're using an empty paper towel roll, cut 2 1 to 2 in (2.5 to 5.1 cm) segments from it.

5. Cut a set of slits into the top of each toilet paper ring. You will be sliding the dinosaur's body into these slits, so make sure that they are directly across from each other. The easiest way to do this would be to squish the rings in half, then cut a 1⁄2 in (1.3 cm) long slit into each one.

6. Slide the dinosaur into the slits. Take the first roll, and turn it so that 1 slit is facing the dinosaur's head and the other is facing its tail. Slide the bottom edge of the dinosaur's body into the slit. Repeat this process for the other leg.

Slide the legs apart until they are on opposite sides of the plate.

7. Paint the dinosaur, then let it dry. Acrylic craft paints will work great for this, but you can also use poster paint too! Use the same colors and patterns for both the front and back. How long it will take for the paint to dry depends on what you are using. Expect to wait about 15 to 20 minutes, however.

You can take the dinosaur's body off of its feet in order to paint it. Do the front first, let it dry, then do the back.

Don't forget to paint the eyes and mouth! Alternatively, you can glue on some googly eyes after the paint has dried.

Tips.

Your dinosaur doesn't have to look realistic at all. You can even make it pink and blue!

Look up pictures of cartoon dinosaurs. They have simpler shapes, which are easier to copy to your paper.

Things You'll Need.

White paper plate, Empty toilet paper roll, Scissors, Green acrylic paint or poster paint, Glue stick or white school glue.

Desember 25, 2019

how to make fake snow

How to Make Fake Snow.

Artificial snow comes in handy for craft projects and when putting on a winter-themed event, such as a school play or the senior prom. Here are several methods for making fake snow that can top off art projects or enhance winter-themed events.

Method 1 Simple Fake Snow.

1. Tear up cotton. Take a cotton ball or cotton swab between your fingers and pull to stretch it out into wispy snow. Lay them out as a field of snow in craft projects, or reshape them into balls to make miniature snowmen.

2. Imitate falling snow with laundry soap flakes or instant potato flakes. Make a video of fluffy, falling snow by pouring this in front of the camera.

This also works as fallen snow. To make it more fancy, combine 4 cups (960mL) flakes, 1⅓ cup (320mL) liquid starch, several drops blue food coloring, and glitter.

3. Punch paper holes. Punch small holes from white paper and use the punched circles as snow. This works best when blown in front of a fan.

4. Add fake snow to snow globes. To refill a snow globe, pour in glycerine and small thermocol balls. You may use glitter or small beads instead of the thermocol.

5. Make a sparkly glaze for small craft projects. Mix ¼ cup (60mL) each of table salt and talcum powder. Spray the surface with spray-on craft glue or dab on white glue where you want the "snow" to stick. Sprinkle the sparkly mixture on the wet glue and allow to dry. Turn the project upside down to remove excess "snow."

6. Mix water with flour or baking soda. Start with white flour or baking soda. Add water one small spoonful at a time, mixing it up with a fork. Once you've formed a paste, cover the ground of a small winter scene. You can shape this into snowy hills and slopes with your hands. Sprinkle more flour over the top once finished.

Method 2 Realistic Fake Snow.

1. Combine sodium polyacrylate with water. Cut open a disposable diaper and remove the white granules; these are made from sodium polyacrylate. You can also buy it in powder or granulated form from the soil treatment section of a garden supply store. Powder makes fluffy "snow," while the granules create slushy "snow." Mix in water little by little until you obtain the desired consistency.

This may look more realistic if you put it in the freezer.

If it dries out, just add more water. If you want to keep it dry, reduce the amount of water and add salt.

2. Blend crushed ice and white paint. This melts quickly, so it will only work in a cold room. Pour the crushed ice in a big bowl, then stir in white paint. Add water slowly until the snow reaches the desired consistency.

3. Make salt crystals. With a cup of water and a string, you can grow your own salt crystals. The longer you hang the string in the water, the larger the crystals will be. Arrange these to form clumps of sparkly snow.

4. Paint the surface. You can use paint to make a surface look like it's been covered with snow. Dip an old brush into any type of white paint. Keep your thumb on the bristles, facing toward the surface. Rub the bristles gently to spray the paint onto the surface.

Don't use a nice new brush, since rubbing the bristles will damage them.

Tips.

To make a full winter scene, cover the base of a cardboard box with a flour and water "snow." Shape the snow into hills and valleys. Press a small mirror onto one of the valleys to make a pond, covering the edges with snow. Plant several twigs as trees, put the lid back on, and poke a viewing hole through the side of the box.

Continue tearing up cotton balls and gluing them down to make it look like fake snow and add a 3D effect.

November 29, 2019