how to make 3d paper clouds

How to Make 3D Paper Clouds.

There are few things as relaxing and inspiring as clouds, but you can't always go outside to look at them. Make a hanging cloud to enjoy the sight of the sky anytime you’re stuck indoors.

1. Draw a basic cloud shape on thick cardboard. Use a pencil or marker to draw a simple cloud shape onto thick cardboard. This will serve as your template. Draw the cloud the same size you want the finished product to be.

If you need a little guidance for sketching the cloud, run a Google image search using the search term "cloud shape." Tons of options will come up for you to choose from!

2. Cut the cloud shape out of the cardboard. Use sharp scissors or an X-ACTO knife to cut along the lines you drew. Cut your cloud template out completely. Discard the excess cardboard.

3. Trace around the cloud template on thick white card stock. Pick a heavy stock so your 3D clouds are fairly durable. Trace around the cloud template on two sheets of the heavy white stock. Use a pencil and sketch lightly so you won't leave any dark marks on your white paper.

4. Cut out each white cloud shape carefully. Use scissors or an X-ACTO knife to cut out the cloud shapes. Cut just inside the drawn line so that your shapes won't have any visible pencil marks around the edges.

Lightly erase any pencil marks that accidentally make it onto the final shapes. Be careful not to bend the edges of the paper as you do so!

5. Add a thin stripe of hot glue down the center of one cloud. Heat up your hot glue gun. Place one cloud shape on the table in front of you. Then, draw a thin line of hot glue directly down the center of one of the cloud shapes.

6. Place a length of fishing line directly into the glue. Cut a piece of fishing line at the length you want to hang your 3D cloud. It can be as long or as short as you like. Anywhere from 6 to 18 inches (15 to 45 cm) would work great. Place the line vertically, directly into the line of glue.

There should be no fishing line dangling under the cloud; it should only extend from the top. You will use this to hang the cloud.

Make sure you're using fishing line, which is transparent. That way, when you hang the cloud, it will look like it's floating in the air. Avoid fishing wire.

7. Fold another cloud shape right down the center. Set the glued cloud aside for a moment. Take another white cloud shape and fold it in half horizontally. The crease should appear in the same place as the glue stripe on the first cloud -- right down the middle.

8. Place the folded edge into the hot glue. Once folded, line up the creased edge of the second cloud with the stripe of glue on your first cloud. Press the edge into the glue, right on top of the fishing line. Hold it in place for about 30 to 60 seconds to ensure you get a solid bond.

You may need to add some fresh hot glue if yours has dried up. Simply add a very thin line of it in the same place.

9. Hang the cloud by the string. You can hang you 3D cloud anywhere you like! Use the fishing line to tie it to a light fixture, ceiling hook, the cord of a ceiling fan, or anywhere else you please.

10Make multiple clouds. You don't have to stop at one cloud! Repeat these steps to create multiple clouds. Cut the fishing line at different lengths so the clouds will hang at different levels. You can also place more than one cloud on a string for a stacked effect.

Remember, each 3D cloud is made from two white cloud shapes. If you want your mobile to have six 3D clouds, you'll need to cut out 12 cloud shapes from the white card stock.

11. Glue the strings around the inside edge of an embroidery hoop (optional). An embroidery hoop is circular, so it's perfect for a mobile. Let the clouds dangle at different lengths, but make sure all the strings extend from the top of the hoop at the same length. You'll use the strings extending from the top to hang your mobile.

Once the glue is dry, gather together the strings at the top. Create a knot to lock them altogether. Suspend the mobile by the knotted string wherever you like!

If you've never seen an embroidery hoop before, it's a small wooden ring used for needlepoint and other sewing projects. It can be found at any craft or sewing store. It will also have a tiny metal tightening device on it, but you won't need that for this purpose.


Things You'll Need.

Thick cardboard.

Thick white card stock.

Scissors or an X-ACTO knife.

Hot glue gun.

Hot glue sticks.

Fishing line.

Embroidery hoop.

Ceiling hooks.


Tips.

Make a few clouds if you like the outcome; a ceiling with several clouds can look really awesome.

Consider painting your paper lantern with glow-in-the-dark paint first. Your cloud will have a subtle glow.

Don't over-fluff your cloud. If you pull on the stuffing too much, it will lose its shape and fall apart.

If you do felting, you can also make a fluffy cloud by felting a ball and putting some of the excess wool around it.

Warnings.

Polyester stuffing is flammable. Do not put clouds near any heat source (lamps, ceiling lights, etc.).