how to make dog yarn

How to Make Dog Yarn.

Dog fur has been used to make a soft and warm yarn, or Chiengora, throughout history. Much like other yarns, the process for making dog fur yarn involves harvesting the fibers, washing the fur, and spinning it into the yarn. Dogs with long fur undercoats are the best candidates for making dog yarn, and many groomers will donate their extra fur to you if you don’t have a dog of your own!

Part 1 Collecting Dog Fur.

1. Brush your dog in the spring, when they’re getting rid of their winter coat. Dogs tend to shed more during the springtime, which makes this a great time for harvesting fur. Use a brush or mitt along the dog’s back, sides, and soft, fluffy areas, and avoid areas like the legs and head. Discard any coarse hairs that you can see in the brush, since you won’t be using them.

Breeds like Samoyed, Siberian Husky, Malamute, Golden Retriever, Newfoundland, Collie, and Sheepdog are great for making dog yarn because they have fluffy undercoats with long fur.

2. Pull the fur out of the brush and place it in a cloth bag. Once you’ve picked out the coarse hairs, use your hand to carefully tug the fur out of the brush and transfer it to a bag. Leave the bag open to allow air circulation, preventing mold and mildew.

If you don’t have a cotton bag, you can use a pillowcase or even a cardboard box for collecting the fur.

Avoid using a plastic bag for collecting the fur since plastic can trap air and allow mold growth.

Don’t overfill the bag or push the fur down into the bag. Packing the fur too tightly can cause mold and mildew to form.

3. Make sure you have at least 4 oz (113 g) of fur. To make any type of yarn, you need a substantial amount of fur. After each collection, use a kitchen scale to weigh all of your yarn to see how much you have. If the fur is thin or short, you might need up to 12 oz (339 g) of fur to get the yarn started.

Keep your bags of fur in a place where your dog can’t get into them, since some dogs like to play with their own fur!

4. Add other types of fibers and fur to make a blended yarn. If you want to make yarn with a variety of textures, you can incorporate wool from a llama or alpaca, or you can harvest fur from different types of dogs. If you don’t have enough fur, or your pet’s fur is shorter than 2 inches (5.1 cm) long, you can use these different fibers to make a stronger, longer strand of yarn.

If your dog doesn’t produce a lot of fur, contact a groomer to see if you can use the excess fur from those dogs, or offer to brush a family member’s dog or a friend’s dog to gather additional fur.

The wool and fur might be a slightly different texture, but that’s okay. As long as you aren’t using coarse hair, the fibers can be blended together through a process called carding.

Part 2 Washing the Fur.

1. Mix warm water and soap in a large bowl. Drip 2-3 drops of gentle dish soap or pet shampoo into a bowl and turn on the warm water. Swish the water around with your hand to make sure it’s an even temperature, and scoop out any bubbles that raise over the top of the bowl.

Too many bubbles can make the fur difficult to rinse, but you do need soap to make the fur clean.

2. Submerge the fur in the water for 10 minutes. Gather the fur and push it down into the water until all of the fibers are completely immersed. Press down on the fur, but don’t tug or pull at it, as this can break the fibers of the fur. Leave the fur in the water to soak out the dirt and debris.

Try to keep the water at around the same temperature to prevent the fur from becoming matted, which is also called “felting.”

3. Remove the fur from the water and refill the bowl with warm water. Use your hand to scoop all of the fur out of the bowl and then dump out the water. Make the new water about the same temperature as the previous water, and make sure there are little to no bubbles in the water.

If there are bubbles in the water, dump the water down the drain and refill the bowl to rinse it.

4. Place the fur in the water and push it down to remove excess soap. Transfer the fur back into the bowl and push it down to squeeze out the soap and any additional debris. If the fur is very soapy, you may need to give it an extra rinse with fresh, warm water.

Avoid pulling or wringing the fur in the water, as this can break the fibers and cause the fur to become matted as it dries.

5. Spread the fur out in the sun to dry for 1-2 hours. Lay down a towel or a mesh screen and position the fur on top of it. Try to spread the fur out as much as possible without breaking it up into small pieces. If there’s wind, place a mesh screen or towel on top of the fur to hold it in place.

If it’s cloudy or rainy outside, leave the fur inside to dry in a well-ventilated area. It may take up to 4 hours for the fur to dry inside.

Part 3 Spinning the Yarn.

1. Card the fur using the same process that you would for wool. Using a pair of hand-carders, place the clean and dry fur in sections on one of the carders. Then, roll and pull the empty carder over the one with the fur in a downward motion 2-3 times to elongate the fur. Continue until the fur is soft and evenly blended,

If you’re blending another type of fiber with the fur, such as alpaca and wool, you can add it in this step by placing it on top of the dog fur in the carder before you begin blending. This will combine the fibers into longer pieces and make them easier to spin.

2. Remove the fur from the carder and roll it into a roll egg. Use your hands or a removal tool to reach underneath the fur on the carder and lift it off of the wires. Once all of the fur is completely off, place the blended fur on a flat surface and use your hands to roll the fur in one direction, forming a kind of tube or cylinder out of the fur.

This incorporates the fibers in different directions, making it easier to form yarn, especially when you’re using blended fibers from different sources, like wool and dog fur or different types of dog fur.

3. Use a drop spindle to easily make a long strand of yarn. Hook the end of your carded and rolled fur onto the end of the spindle and hold the fur in one of your hands. Then, spin the bottom of the spindle and draw the fibers out of the rolled ball of fur. This will create a long strand of yarn from the fur.

If your fibers are very short and you didn’t blend them with another type of fiber, you may find that they aren’t strong enough to hold the spindle up. In this case, you should try hand-spinning the fur to make your yarn.

4. Hand-spin the fur if you don’t have a spindle. Hold the fur in one of your hands, and pinch one end into a point. Then, using the opposite hand, begin twisting and slowly drawing the fur out of your hand. Keep twisting it to make it tight and dense until you have a long strand of yarn.

This method produces shorter, more dense strands of yarn that are good for hats and other small items.

5. Make cozy crafts out of your new dog fur yarn. Try your hand at knitting and crocheting with your new yarn. Dog yarn is soft and warm, and it easily repels water, so try making a hat or scarf with the yarn. You can even make a pair of socks or gloves to keep yourself warm!

If you have a lot of yarn from the fur, you can make a sweater or a blanket.

6. Store the yarn in a dry, well-ventilated area. Even when the yarn is made, the dog fur might still be susceptible to mold and mildew if it gets wet. When you aren’t using the bundles of yarn, keep them somewhere dry with good air circulation. If you have to put the yarn in a bag to store it, use a bag made of a breathable fabric, like cotton.

Try to keep the yarn out of reach of pets, since they may still be able to smell some of their own scent on the fibers and might want to play with the bundles of yarn!

Tips.

Avoid using clippings or overcoat hairs, which can be scratchy and uncomfortable to wear.

Warnings.

Keep in mind that some people are allergic to dogs and shouldn’t wear items that have been made from dog fur, even if it has been washed.

Things You'll Need.

Brush or mitt, Dog fur, Cotton bag, pillowcase, or box, Large bowl, Dish soap, Water, Towel or mesh screen.

Hand carders, Wool or alpaca (optional, for added length/strength), Drop spindle (optional).

Desember 12, 2019

how to cut vinyl records using a hotknife

How to Cut Vinyl Records Using a Hotknife

If you have an old vinyl record that's unplayable or scratched, upcycle it instead of throwing it away. You can make art, designs, jewelry, and much more by cutting the record. By heating the record or by using a hotknife, you can easily cut your vinyl into whatever shape you need!





Buy a hot knife from an arts and crafts store. Hot knives are heated cutting tools used in crafts and woodworking to precisely cut delicate materials like vinyl or foam. Visit your local crafts store and look for a hot knife with a sharp blade attachment.

Check a home improvement store if an arts and crafts store doesn’t carry hot knives.





Plug the hot knife in and let it heat up. Turn on the knife and set it so the blade is off of your work surface. Wait 2-3 minutes for the blade to heat up or else your knife won’t make smooth cuts. Do not touch the blade of the knife once it’s heated.

Work on a wooden or heat-resistant surface so your knife doesn’t burn through it when you make your cuts.

Keep the knife out of children’s reach.

Many hot knives will have a built-in stand to hold the blade off the table.





Poke the knife through the record and pull it along your design. Slowly stab the tip of the hot knife through the vinyl record. Once you’re through the vinyl, pull the knife at a steady speed along the line you want to cut. Follow all of your lines until you’ve completely cut out your design. Turn off the knife and let it cool down once you finish.

Vinyl contains chlorine gas that could escape when it’s heated. Wear a facemask while cutting the vinyl with a hotknife.

Don’t hold the knife in one spot for too long or else the vinyl will melt and bubble.

Keep the knife stationary and move the record with your other hand if that’s more comfortable.





Punch the vinyl pieces when you finish cutting them. Hold the cutout portion of vinyl against the table with your non-dominant hand. Start gently pulling the rest of the record off your work surface with your dominant hand to separate the pieces.

For more intricate pieces, hold the cutouts as close to the edge as possible so they don’t break off when you try to separate the pieces.





Warnings.

Vinyl releases chlorine gas when heated. Wear a facemask so you don’t inhale any of the fumes.







Things You’ll Need.

Using a Hotknife.

Hotknife.

Wooden work surface.

Facemask.

November 11, 2019

how to cut popsicle sticks

How to Cut Popsicle Sticks.

If you’re having some fun by engaging in some arts and crafts, you may need to cut some popsicle sticks. Cutting popsicle sticks can be tough, since the flimsy wood has a tendency to slide out of regular scissors and splinter when you cut it. To cut popsicle sticks while minimizing the chance of splinters, use serrated scissors if you don’t mind a rough edge. For a smoother edge, use wire cutters or snips depending on what is available to you.





Splitting with Serrated Scissors.



Grab a pair of heavy-duty kitchen or craft scissors. Standard scissors with a flat blade won’t easily cut through a popsicle stick. However, you can use any pair of serrated scissors that are designed for the kitchen. Large pairs of craft scissors will work as well.

This method will leave a rough edge behind wherever you cut.



Open your scissors and hold the popsicle stick against the blades. Put your thumb and index finger in the finger holes. Hold the popsicle stick that you want to cut in your nondominant hand. With your blades opened all the way, place the section that you want to cut as close to your handle as possible so that it sits perpendicular at the junction where the 2 blades meet.

You’ll need special scissors if you’re left-handed.

Warning: Keep your fingers at a safe distance away from the blades.





Close the finger holes quickly and firmly to cut the stick. With your other fingers at a safe distance, bring your thumb and index finger together to start closing the blades. Close your scissor blades all the way through the popsicle stick until the two blades snap together. The harder you close your scissors, the less likely you are to fray the edge.



Inspect your edge and remove any splinters. You don’t want random pieces of wood falling off of your popsicle stick. After you’ve cut it, hold it up to your eye and look for splinters. If there are any, carefully pinch them between your thumb and index finger and pull them off.

You can use sandpaper to smooth out rough edges by gently rubbing it on the edge where you cut your popsicle stick. Any grit sandpaper will work.







Using a Wire Cutter.



Find a pair of wire cutters with a flat blade bigger than 1 inch (2.5 cm). You are only going to use the wire cutters to brace the popsicle stick in place when you snap it, so the blades don’t have to be sharp. Wire cutters create a lot of even pressure between their blades when you close the handles. This means that they are unlikely to cause a splinter or uneven edge where you snap the popsicle stick.

You can use a pencil to draw a guide line where you want to cut the popsicle stick. This will help you keep your wire cutters positioned correctly when you twist your wrist to make your cut.



Hold your wire cutters loosely while you line them up on the stick. Wrap your dominant thumb over the top handle of the wire cutters and put your other fingers around the bottom handle. Hold your hands steady and put the popsicle stick in the wire cutter’s jaws. Slide your popsicle stick in the tool’s jaws to find the spot that you want to cut it.



Tighten your grip and hold the popsicle stick in place. You don’t need to squeeze very hard to get the blades to tighten around your popsicle stick. Don’t push down hard, or you’ll risk snapping the stick.

Even though they tend to have smaller blades than scissors or snips, wire cutters pack a punch when you squeeze the handles. Keep your free hand clear of the blades while you position your popsicle stick.



Wiggle your wire cutters back and forth while keeping them closed. With your free hand, hold the longest section of your popsicle stick in place by wrapping your fingers around it and staying still. Then, move your wire cutters back and forth in order to loosen the wood at the junction where you’re holding them.

Keep your grip at the same level of pressure while you move your wire cutters.



Snap the wood off by twisting the wire cutters. Once you hear a few creaks from the wood loosening, you can snap the stick by rotating the wire cutters with your wrist. Turn your wrist sharply to the left and right without moving your arm. The popsicle stick will snap at the junction where you held it with the wire cutters.

Tip: Don’t pull away or move your arm while you do this or you’ll risk leaving a jagged edge.





Cutting with Snips.



Choose your snips based on how you want to cut. Snips are color coded based on the direction that they’re designed to cut. Green snips make cuts to the right, red snips make cuts to the left, and yellow snips cut straight lines. Choose your snips based on whether you’re trying to cut at an angle or make a straight cut.

The advantage of using snips is that they’re going to cut quickly. They may make your popsicle stick slide as you cut it though, so keep a firm grip while cutting.



Open your grip and position your cut. Hold the popsicle stick in your nondominant hand and loosen your grip on the snips to open the blades. Position your popsicle stick between the blades wherever you want to cut it and hold it steady.

Keep your free hand clear from the blades as you position your stick.



Squeeze the handles to close the blades and make your cut. You don’t need to squeeze hard; snips are designed to cut sheet metal and generate a lot of cutting power automatically. As you squeeze, keep the popsicle stick still so that your cut stays consistent. Tighten your grip until you hear a snap and then release the handles.

Tip: Remove any splinters by pinching them between your thumb and forefinger and pulling them off.





Tips.

You can use sandpaper to smooth out jagged edges after you cut them. All you have to do is hold a small piece of sandpaper in your dominant hand and lightly drag it back and forth across the edge where you cut your stick.

Popsicle sticks tend to splinter no matter how you cut them, but they’re also are relatively cheap. Buy a few extra bundles so that you always have some extra sticks laying around in the event that you split a few them.

Warnings.

Never use snips, scissors, or wire cutters without the supervision of an adult. If you need help, your parent or teacher will be able to cut your popsicle sticks for you.

Always keep your free hand away from the area that you’re going to cut.

Work at a stable table with plenty of room.

November 10, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020

how to paint wood crafts

How to Paint Wood Crafts.

Many arts and craft stores sell blank wooden pieces that you can paint. While you can always paint them right away, there are a few steps that you can take to ensure a neater, longer-lasting finish. Sanding the piece first will get rid of any ridges, while priming it will help the paint stick on better. Adding a coat of sealer will protect all your hard work, and help it last for years to come.





Prepping the Wood.



Sand the surface of the object with 140 to 180-grit sandpaper. You can do this with a sanding sponge or with a piece of sandpaper; a sanding sponge will work the best on curved surfaces, however. Also, make sure that you are sanding with the grain of the wood, not across it.

Some wooden pieces from craft stores come pre-sanded. If the surface area is completely smooth, skip this step.



Wipe the dust away with a tack cloth. A tack cloth is a special, sticky cloth intended for this purpose. You may find it alongside the sandpaper in the craft store or in the hardware store. If you can't find a tack cloth anywhere, try a damp cloth instead.

It would be a good idea to do this, even if you didn't sand your piece; items bought from stores are sometimes dusty, which can prevent the primer and paint from sticking.



Apply a coat of primer. You can use the brush-on kind or the spray-on kind. This will seal the wood surface, and help it take the paint better. It will also help the paint show up better, especially if you are using a light color.

Prime the front and sides first, let them dry, then prime the back.

Image titled Paint Wood Crafts Step 4



Allow the primer to dry before moving on. For an even smoother finish, you can sand the first coat of primer, wipe it clean, then apply more primer over it. Do this a few more times until there no ridges remain.







Painting and Sealing the Wood.



Pour a dollop of acrylic paint onto a palette. Choose a color for the background, then pour out a small amount onto a palette. Acrylic paint dries quickly, so don't pour out your other colors just yet. You can use the cheap, craft-grade acrylic paint that comes in bottles, or you can use the more-expensive artist's grade that comes in tubes. If you are using the artist's grade, dilute it with a few drops of water until it has the consistency of cream first.

You can use small dishes, plastic lids, and paper plates as palettes.



Apply a coat of paint over your piece. Use a foam brush or a wide, flat paintbrush to apply the paint. Let the paint dry, then apply a second coat, if needed. Let this second coat dry as well. Do the front and sides first, let them dry to the touch, then do the back.

Look for brushes made from taklon, katakana, or sable. Avoid camel hair brushes or stiff, bristle brushes.

Don't overload the brush with paint. The paint should come no more than halfway up the bristles.



Let the paint dry, then add a second coat, if needed. How long this takes depends on the brand that you are using. Most types of acrylic paint will dry in about 20 minutes, however. If the paint is too thin, add another coat of paint, and let it dry as well.

Take this time to clean your brush(s) with water. Do not let the paint dry on the brushes.



Add your designs and details. You can use stencils or trace designs onto the wooden piece. You can also free-hand the designs as well. Apply the base color first, let it dry, then add the details. For example, if you wanted to paint a smiley face, you'd paint the yellow circle first, let it dry, then add the smile and eyes.

Dip the brush in water often to keep the paint wet, even if you are using one color.

If you are working with multiple colors, keep a cup of water nearby. Rinse the brush with water before switching to a new color.



Let the paint dry completely. Refer to the label on you tube of paint for exact drying times. Just because something feels dry to the touch does not mean that it is ready to handle or take on sealer. Every brand will be different, but you can expect this to take about 24 hours.



Apply 1 to 2 coats of sealer. Sealers come in many different finishes, including matte, glossy, and satin; choose one that you like the best. Apply a thin coat of spray-on or brush-on sealer, then let it dry. Apply a second coat, if needed, and let that one dry too.

If you are using the brush-on kind, apply it using a wide, foam brush.

If you are using a spray-on varnish, be sure to work in a well-ventilated area.







Trying Other Techniques.



Skip the priming if you want to paint a design over bare wood. Instead, consider painting over the entire piece using a wood stain or a sealer. Wait for the stain or sealer to dry, then paint your designs onto the wood. Be sure to seal everything after the paint dries.



Add designs using stencils. Buy or make a stencil, then place it over the wood. Paint over the stencil using decoupage glue; this will seal the wood and prevent the paint from leaking under the stencil. Let the decoupage dry, then paint over the stencil. Peel the stencil away while the paint is still damp. Seal the wood using a spray-on or brush-on sealer.

You can make stencils using contact paper or self-adhesive vinyl.

You can use this method over bare, unsealed wood.



Use graphite paper to trace designs, then fill them in. Place a sheet of graphite paper over your piece of wood, graphite-side-down. Draw your design, then lift the paper away. Go over the outline using a thin, painted brush, then fill the design in using a flat brush. This method works best over painted wood. You can do it over bare wood, but the paint may not stick as well.

If you don't know how to draw, print the design out on tracing paper first, then place the tracing paper on top of the graphite paper.

If you are working over a dark-colored surface, make some chalk graphite paper instead: cover the back of a piece of paper with chalk, place it chalk-side-down onto the wood, then trace your design.



Create a tinted stain to show off the wood grain. Apply a thin layer of acrylic paint using a dry paintbrush. Dip a wet cloth in a small amount of paint, then rub it over the wood. This will help blend strokes together without covering up the wood grain.

The cloth should be wet, but not dripping.

Alternatively, you can paint over the entire piece using watered down acrylics or watercolor paints.



Make a DIY chalkboard. Paint the surface of the wood with 2 to 3 coats of chalkboard paint. Let the paint dry, then paint designs using normal paint onto it, if desired. Allow the chalkboard paint dry and cure completely. Cover the board with chalk, then wipe the chalk off.

Keep the designs on the edges of the wooden piece so that you can use the surface as a chalkboard.

You do not need to prime a DIY chalkboard, but sanding it would not be a bad idea.





Tips.

You can spray paint the wood first, then paint more intricate designs using acrylic paint.

Remember to prime, paint, and seal the bottom of your piece as well!

It is better to apply several thin coats of paint, primer, and sealer rather than one or two thick coats.

You get what you pay for when it comes to brushes. For the smoothest finish, consider investing in a high-quality brush.

Let the paint and sealer cure for 3 weeks before handling the piece. If you must handle the piece sooner, do so gently and with great care.

Choose your paint colors carefully. Acrylic paint typically dries 1 to 2 shades darker.

Use small, round, pointy brushes for precision and details, and wide, flat brushes for curves and backgrounds.

You don't absolutely have to prime the wood, but it is highly recommended. You can skip this step for a simple, kid's craft project, however.



Warnings.

Wear a dust mask over your face while sanding the wood for added protection.

Always using spray paint or spray-able primers/sealers outside or in a well-ventilated area.



Things You'll.

Wooden object (ie: frame, box, letter, toy car, etc).

140 to 180-grit sandpaper

Primer.

Acrylic paint.

Paintbrushes.

Sealer.

November 10, 2019

how to organize craft supplies

How to Organize Craft Supplies.

If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.







Steps.



1. Locate all of the craft supplies that you own.

If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.

Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.



2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.

Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.

Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.

Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.



3. Sort out all of the supplies that you have into smaller groups.

Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.

Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,



4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.

Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.

If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.

Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.



5. Keep on sorting.

Sort a little bit whenever you start or finish a project or get new supplies.

Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.



6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.

Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.

For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.



7. Repeat this process with different containers until everything is filed away.



8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.



9. Finished.





Tips.

Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.

Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.

Put things where they'll be handy when you need them, and where you think you'll look for them.

Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.

Most importantly, find your own balance between creativity and control.

Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.

Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.

Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.

Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.



Things You'll Need.

Craft supplies.

Multiple containers depending on the amount of supplies.

Paper to label the containers.

November 21, 2019

diy cat scratching post for your feline friends

diy cat scratching post for your feline friends

DIY Cat Scratching Post

More often than not, cats can be found lounging in the sun or snoozing the day away. But don’t let them fool you—they love to play. Cats love climbing, chasing, and jumping just as much as any other pet.



But all the climbing and scratching can lead to wear and tear. Instead of sacrificing your beloved couch or armchair, find some enriching toys to give your feline to keep them happy and healthy. That way, everyone can live in peace.



While perusing the pet store shelves, you may notice that most toys, treats, and beds are lacking in style. For some reason, a lot of pet products are behind the curve when it comes to aesthetically pleasing design. With DIY, you can maintain your dream home’s modern decor while giving your pet everything you need.



This DIY scratching post is sure to please your furry friend. Plus, it will look great hanging on your wall! Say goodbye to boring beige cat furniture.



Gather Your Supplies

This DIY requires a few easy-to-find supplies. To make it even more budget-friendly, head to a second-hand store to find a frame. You can easily upcycle it at a low cost.



Here’s what you’ll need:



Small rug



Scissors



Measuring tape



11" x 14" picture frame





Measure and Cut Your Rug

You may not even have to head to the store to find the carpet material for this project. If you remodeled your home, you likely already have some leftover carpet in the garage.



But if not, you can find carpet samples at local carpet retailers. Or you can use an indoor/outdoor decorative rug (like the one we used), a door mat, or even a bath rug. Just be sure your material isn’t unraveled or damaged—that’s the cat’s job.



Before using your scissors to cut your carpet, use a measuring tape to measure the size of the picture frame. Then, use those measurements to cut a rectangular section of your carpet that will fit perfectly inside the picture frame. If the first try isn’t perfect, just keep trimming away.



Your regular pair of scissors will sometimes work for this, but it depends on the material you use. If it’s difficult to cut with scissors, try using sharp shears.



Secure in Frame

Once you have cut your material to match the size of your frame, it’s time to secure them together.



First, remove the sample photo and glass cover from your picture frame. These parts aren’t necessary and you can keep them for future crafts or recycle them if you have no use for them.



If your picture frame has a kickstand on the back, it may be necessary to remove it. This frame will be hung on the wall and a kickstand on the back may make it too bulky, causing it to stick out when it’s hung up.



Secure your piece of rug or carpet inside your picture frame. Be sure to apply the cardboard backing piece that came with the frame onto the back to make sure things stay in place.



Display

The moment we’ve all been waiting for is here! Now that your DIY is finished, you’ve got an adorable piece of wall decor that looks great and satisfies your kitty to no end. Every cat will appreciate this fun toy. And when it wears out, just replace the material inside to keeping things looking new.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019

how to keep glitter from falling off

How to Keep Glitter from Falling Off.

If you’re a glitter lover, chances are you’ve run across crafts and body glitters that are susceptible to flaking off and leaving a glitzy, sparkly trail behind you. Luckily, there are a few different ways you can craft with and wear glitter so that it doesn’t fall off so easily. Try using Mod Podge to seal in the glitter in your crafting projects, or mix cosmetic-grade glitter with different beauty products to create your own body glitter.







Using Mod Podge for Crafts.



Add a layer of satin or gloss Mod Podge to your craft. Use a foam brush or paintbrush, depending on your craft, and lightly brush a thorough layer of Mod Podge onto the surface area of whatever you are looking to cover in glitter. Make sure the entire area is coated and that there are no bare spots.

You can even make your own Mod Podge at home to save money!

If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time.

Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.



Dust, pour, or poof the glitter over the Mod Podged area. Depending on the kind of glitter you are using, you might apply it in a slightly different way. The main thing to remember is that you want to completely coat the Mod Podge in glitter and not leave any empty spaces.

You can also use a foam brush to spread on your glitter if you want a little more control over how much you use.

If you are looking for a high-glitter outcome, you can apply a second layer of Mod Podge and glitter immediately after the first one without waiting for it to dry first (it will take a little longer to dry after the second coat, then, but it will be highly glitterized).



Allow the glitter and Mod Podge to dry for 1-2 hours. Leave your newly glittered item alone for several hours or until it is dry to the touch. Try to leave it in a position so that the Mod Podge and glitter isn’t touching any other surface.

If you are adding glitter to multiple items, this is a great time to continue working on those projects while you’re waiting for others to dry.



Apply a top layer of Mod Podge to seal in the glitter. Once the first layer is dry to the touch, use your sponge or paint brush to add another thin layer of Mod Podge to your item. Use long, even strokes to reduce the appearance of brush lines. Make sure you cover the entire item and don’t leave any raw glitter poking through.

You could also use watered down school glue to create an opaque sealant for your crafting project.

The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.





Let your finished craft dry for 3-4 hours before you use it. Depending on how thickly you applied the Mod Podge, you may need to wait anywhere from 3-12 hours before you can safely use the item without potentially messing up the application. Always check the directions on the bottle for tips and guidelines.

If you have a dehumidifier, you can set your craft in front of it for a speedier drying time.

Never place your item directly in front of a heat source, like an electric heater or a hair dryer, as this may cause the Mod Podge to melt or change consistency so it doesn’t dry correctly.



Coat flaking items with sparkle Mod Podge to seal in the glitter. If you have an item that has glitter that is flaking off, you can apply pre-glitterized Mod Podge to add back some sparkle and lock in the remaining glitter. Simply use a sponge or paint brush to apply a thin, even coat of the sealant to the item, then let it fully dry before you use it again.

Make sure to work on a protected surface, like a counter covered in newspaper or paper towels.



Mix Mod Podge with your glitter of choice for a stronger glitter look. Pour some Mod Podge into a disposable cup or bowl and mix in as much glitter as you want to make your own glitter sealant. You can make the glitter as weak or as strong as you prefer. Then follow the instructions to apply the Mod Podge and let it dry.

You can also apply your glitter Mod Podge, another layer of glitter, and then top it off with the glitter Mod Podge again for even more glitter fun.









Wearing Body Glitter.



Combine body oil and loose glitter for an all-body glitter-wearing option. Instead of sprinkling loose body glitter on your arms and hoping it doesn’t fall off, combine body oil and loose glitter in a travel-sized shampoo container. Shake the container up really well, and then apply it to your arms, legs, chest, or face whenever you need an extra glitter boost.

While you could purchase body oils or lotions that already have glitter in them, it can be less expensive and more fun to do it yourself.



Put petroleum jelly on your skin and add body glitter for a sparkly look. Use a clean makeup or paint brush and apply an even layer of the petroleum jelly to the area you want to cover in glitter (like your collar bones, shoulders, or even your hairline). Then use another clean brush or your hand to gently press loose body glitter onto the jelly.

Visit a cosmetics store to buy body-specific glitter, which is usually a slightly different consistency than the glitter used for crafting.

If you don’t have petroleum jelly, you could also use hair gel as the sticky base for your body glitter.

Use this method in areas that aren’t going to come into frequent contact with other surfaces. For example, it probably wouldn’t work well on your legs if you are going to be sitting and standing and walking around often.



Mix hairspray and glitter to create glitter brow and hair gel. Spray hairspray into a dish, like a small cup or bowl (or even a disposable Dixie Cup), and add loose glitter. Mix it around with a toothpick or a spoolie brush, and then apply it carefully to your eyebrows or to select strands of your hair.

Do not use the glitter and hairspray mix on your eyelashes as it could irritate or infect them.



Wear vibrant lipstick and then add loose glitter for a shimmery lip look. Steer clear of sticky or glossy lipsticks and stick with a cream base to keep the glitter in place better. Put on a layer or two or lipstick, then use your fingers to gently press loose glitter into your lips.

With this trend, you’ll want to avoid pressing your lips together or eating or drinking anything too messy.



Create a glitter stamp from a makeup sponge and loose glitter. Cut a makeup sponge into a fun shape (like a heart or a star) and dip one side of it carefully into loose glitter. Spread a thin layer of petroleum jelly or hair gel on your body where you want the stamp, and then press the makeup sponge onto the jelly to transfer the glitter.

Your glitter stamp should stay on all day as long as it doesn’t brush up roughly against anything else.







Keeping Glitter on Clothes.



Use hairspray for a quick fix on your glitter clothing. Take your item of clothing outdoors or to a well ventilated area, and lay it down completely flat. Then spray a light coat of hairspray overtop of the glitter. Use unscented hairspray if you can. Allow the hairspray to dry completely before you wear the clothing item.

Hairspray is a great, quick fix, but overtime it doesn’t hold up, though you can reapply hairspray when you need to. Long-term, you just have to care for and store glittery clothes very carefully.



Affix glitter to your clothes with fabric glue. Lay out your item of clothing in a clean workspace, and apply the fabric glue in whatever patten you want. Then, carefully shake loose glitter overtop of the glue, coating it so that none of the glue is visible. Let the glue and glitter dry for several hours before picking up the item and shaking off the excess glitter.

You could even make a stamp out of a sponge and decorate your shirt that way (like stars all over a t-shirt), and then shake the glitter on top of the design.



Wash glittery clothes sparingly and let them air-dry. When you go to clean your clothes that have glitter on them, try to wash then only when they really need it. Use cold water and the delicate cycle in the washing machine, and don’t put them into the dryer. Instead, hang them up to air-dry.

You could even take your glittery clothes to a dry cleaner instead of washing them yourself.



When crafting with glitter, try working over a cooking tray. You’ll catch all the excess glitter that falls off and can easily return it to its container.

When making your own body glitter, try to use cosmetic grade glitter rather than crafting glitter.

Store your glittery clothes in plastic bags to protect them from rubbing up against other items in your closet (and to protect your other clothes from getting glitter all over them).





Things You’ll Need.

Crafting with Glitter and Mod Podge.

Mod Podge (satin, gloss, or glitter).

Foam brush or paintbrush.

Disposable cup or bowl.

Craft glitter.

Wearing Body Glitter.

Makeup or paint brush.

Petroleum jelly.

Hairspray.

Lipstick.

Makeup sponge.

Body oil.

Cup or bowl.

Cosmetic grade body glitter.

Keeping Glitter on Clothes.

Hairspray.

Fabric glue.

Plastic baggies.

November 08, 2019

how to melt glue sticks

How to Melt Glue Sticks.

Glue sticks can be melted down for a number of applications. Whether used in crafts, manufacturing, packaging, fashion, or in any other creative function, glue sticks are a cheap and easy to come by product. All-purpose or school glue sticks and hot glue gun sticks can both be melted in the microwave, and hot glue gun sticks can, of course, be melted in a glue gun. If handled carefully and done properly, the processes are extremely quick and can help you adhere all kinds of surfaces to one another.







Microwaving Glue Sticks







Remove the glue sticks from their original packaging. All-purpose or school glue sticks can be unscrewed and pulled or broken off from their plastic casings. Hot glue gun sticks simply need to be removed from any packaging or wrappers.

Make sure there are no plastics or other wrappings in or on the glue you want to melt. Most wrappings and plastics are not intended to be melted and can be unsafe to do so.

If your glue stick has a plastic piece through the center, carefully cut the glue away from the plastic using a knife.



Put the stick(s) into a microwave-safe dish. Since the glue will be very messy and hard to clean, use a single-use paper bowl. If you are dedicating the dish to the craft of melting glue sticks, a ceramic or glass mug or bowl will also work.

Be sure the glue sticks are fully inside of the dish. If they overhang the mug or bowl, they will melt outside of the dish.

Start with smaller quantities to test how long your particular glue takes to melt.



Microwave the glue on full power in 20-second intervals. Depending on your microwave and amount of glue, you should at least be able to partially melt the sticks. If there are still solids, microwave the glue for an additional 20 seconds after stirring it with a craft stick or plastic spoon.

Do not leave the microwave unattended. If something goes wrong, you should be there to stop the microwave.

Do not heat the sticks for extended periods of time. It may look like nothing is wrong while it heats, but overheating the glue can create fumes that are unsafe.



Remove the glue from the microwave carefully. You should use it immediately, but be careful as the glue will be quite hot. Depending on how long it was heated, the dish can be hot as well.

Use the glue fresh out of the microwave so it will be easy to apply.

If the glue re-hardens, simply microwave it for another 20 seconds.







Melting Glue Sticks with a Glue Gun





Obtain a glue gun at least as big as the glue sticks. Only use hot glue sticks intended for glue guns—not all-purpose or school glue sticks. If the sticks won’t fit into the glue gun, you cannot melt them. If the sticks are too small, you will just have to use your hand to feed them through.

Make sure your glue sticks are meant for a glue gun. You should not use other types of glue sticks because they can damage your glue gun.



Plug in the glue gun over cardboard or newspaper. As the tip of the gun heats, the gun may start to drip as it melts. By putting a piece of cardboard or newspaper underneath, you can protect your working surface.

Always follow the instructions specific to your glue gun regarding electricity and timing.

Do not leave a glue gun unattended. They can tip over or otherwise cause severe burns if you are not careful.



Squeeze the trigger of the glue gun to feed the sticks. If the sticks match the size of the glue gun, the trigger will allow the stick to press and feed through the heated tip. The glue will then melt and drip out wherever you point the gun.

Do not touch the metal tip of the gun or the melting glue. They will both be extremely hot.

If the glue is not feeding through, it may either be too large of a stick or may still be heating up.

If your glue stick is smaller than the glue gun, you will have to push from the back end of the stick to feed it through.

Use gloves to protect your hands from the heated materials.



Insert another stick once the first no longer feeds through. If the gun or your fingers can no longer safely feed the first stick through the rear of the glue gun, use another glue stick to press it through. It will then be caught by the plastic feeding mechanism and continue melting.





Warnings.

Do not touch melted glue. It will be extremely hot and adhere to your skin, making the burn worse.

Do not inhale melted glue fumes. Some glues are non-toxic, but not all of them are. Regardless, the fumes can be dangerous, and you may need to wear a respirator while working.

November 13, 2019

20 common embroidery mistakes

20 common embroidery mistakes

Every hobby has its learning curve, and embroidery is no exception. Avoiding mistakes can save you time, money and frustration.



Reviewing these top 20 common—and avoidable—embroidery mistakes, and you'll know what to avoid before starting your next embroidery project.



Not Reading the Instructions

Always read the instructions. Using the wrong thread or number of strands of embroidery floss is one of the most common errors that happens when you skip reading the instructions. With kits, this can lead to running out of thread before completing the project. It also may result in a different line thickness than intended.



Choosing the Wrong Embroidery Fabric

Most forms of surface embroidery require a firm fabric foundation, often with a thread count of 28 or higher. Using an embroidery fabric with a lower thread count can result in poorly-formed stitches, although you can add stabilizer to create a better surface. Counted Thread or Pulled Thread projects require a lower, looser thread count. This makes it easier to pull and remove threads and create lacy stitches.



Selecting the Wrong Size of Needle

Using an embroidery needle that is too large for the project can result in holes in the fabric where the needle and thread enter or exit.



Using a Sharp Needle Instead of a Ball-Point Needle

Use sharp needles when the needle and thread need to pierce the fabric, as in surface embroidery and crewel.



Starting and Ending a Thread With Knots

Although not the worst mistake ever, it's best to avoid knots in any type of embroidery project. Instead, start a new thread with ​a waste knot, away knot, or by weaving it into the back of previously worked stitches.



Selecting an Embroidery Thread of the Wrong Thickness

Generally, bold lines of embroidery require thicker embroidery threads and narrow lines require finer threads. Combine threads to make a thicker strand and separate floss into single strands or groups of strands for working thinner lines.



Using Craft Thread Rather Than Embroidery Thread

Inexpensive thread sold in packages as a “Craft Thread” (often 6-strand floss or #5 pearl cotton) are for craft projects such as friendship bracelets, macramé, or children’s crafts and not for embroidery.



Marking Your Fabric With a Regular Pen

It's best to use a water-soluble fabric marking pen, chalk pencil or fabric pencil to mark your embroidery design on your fabric.



Using Heat Transfer Pencils Instead of Water-Soluble Fabric Pencils

Transfer pencils and pens are great for making iron-on designs, but they are permanent.



Iron Transfers Are Fuzzy or Distorted

When using iron transfers (either that you purchased or made with a heat transfer pen), fuzzy markings result when you slide the iron back and forth on the pattern paper. Instead, press the iron on the back of the pattern paper just long enough to transfer the markings.



Not Using an Embroidery Hoop or Frame

Using an embroidery hoop, scroll frame, or stretcher bars keeps the fabric taut and makes it easier to work accurate, well-formed stitches.



Rolling Fabric on a Scroll Frame in the Wrong Direction

Roll fabric on the bars of a scroll frame with the wrong sides of the fabric rolled to the outside (facing you).



Not Removing the Hoop Before Storing

Always remove your embroidery hoop before putting away your embroidery for the day, and especially before storing it for any length of time.



Not Enough Floss or Embroidery Thread When Starting

Before you start stitching, make sure you have all the necessary embroidery threads on-hand.



Getting Your Project Dirty

Always wash your hands before working on your embroidery project and avoid snacking while you stitch.



Improper Cleaning or Laundering for the Thread or Fabric Type​​

If an item requires laundering, check the fiber content of the fabric and thread before washing.



Ironing a Finished Embroidery Piece and Smashing the Stitching

You work hard to create beautiful works of art with delicate and dimensional stitching.



Storing Needlework Fabrics and Finished Pieces Incorrectly

Needlework is an investment of both time and materials. Properly caring for and storing your pieces helps avoid staining and fiber breakage, ensuring you get a lifetime of use from your items.



Displaying Needlework in Direct Sunlight​​

Many fabrics and threads used in embroidery like to promise that they are fade-resistant.



Rushing to Fix a Mistake

If you make a mistake and find yourself picking out stitching, do this carefully and slowly.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019