how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020

how to make a paper penguin using an origami penguin

How to Make a Paper Penguin Using an Origami Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases. Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

9. Fold the top half over. With the reverse fold out of the way, you want to take the corner pointing right—just the top layer not both layers—and fold it back on itself. Fold it so that the flat side just above the corner lines up flush with the flat vertical line on the left side of the paper. Make a crease here, but do not unfold the flap. Leave it folded.

10. Turn the page over and make the same fold on the other side. You now want to turn the paper over completely and make the same fold you just made but from the other side. In other words, fold the other corner (the bottom layer from the previous step) over so that its upper edge is also flush with the same flat side of the page.

Especially if you're using a two-colored sheet of paper, this step will make more sense because the form of the penguin will start to become more apparent as the black side of the page will face outward on both sides. As the project continues to take shape, these will be the wings.

11. Turn the paper over again. To prepare for the next major fold, you will need to turn the whole paper over again. When you do, you want to orient the paper so that the really narrow point is pointing upward.

12. Fold the narrow point over to the left. With the paper oriented so that the long, narrow point face up, take that point and fold it over at a 45° angle so that the point now points to the left. You'll see how this fold starts to take shape as the penguin's beak. After making the crease in this fold, return the point to the upward position.

13. Reverse-fold along the crease you just made. This step requires you to make an outside reverse fold along the crease you made in the last step. An outside reverse fold is slightly different from the earlier reverse fold. To make the fold, unfold the paper along the black side slightly, and poke your finger from the white side at the fold you made in the last step. When the creases reverse direction, simply reform the fold so that the two black sides of the sheet are in contact again.

Once again, reverse folds can be a bit difficult to describe.

14. Fold the wing over. Though clearly visible now, the wings won't quite look perfect yet. Take the wing on the side facing up and fold it over so that the white side faces out. You'll fold it back so that the corner which was facing the bottom left now points to the right. Pull it back far enough so that it's just shy of where the little tail is at the bottom of the paper.[

15. Fold the wing back over on itself. Once you've made the crease from the previous step, fold the wing back over on itself so that the black side is once again facing up. Fold it so that the tip of the corner is just shy of touching the horizontal white edge at the bottom of the body.

16. Makes a rabbit's ear fold. To make the rabbit's ear fold, lift the portion of the wing you just folder and reverse the crease from the last step, but only at the bottom of the crease and only at the depth of roughly the tip of your finger. This will makes the bottom tip of the wing into a little flap though the flat edge will still be parallel to the rest of the wing.

17. Repeat steps 14-16 for the other wing. With one wing complete, you're ready to turn the page over and repeat the same steps to form the other wing. Simply use the same folds from steps 14-16 but on the other side.

18. Tuck in the points at the bottom. The bottom of the penguin will still have points sticking out in a slightly misshapen way. Fold each of these points toward the inside of the penguin to make a flat, horizontal bottom to the body. Once you tuck these flaps up, you have your penguin!

Desember 22, 2019

how to make a paper penguin

How to Make a Paper Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases.  Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

Januari 22, 2020

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to keep glitter from falling off

How to Keep Glitter from Falling Off.

If you’re a glitter lover, chances are you’ve run across crafts and body glitters that are susceptible to flaking off and leaving a glitzy, sparkly trail behind you. Luckily, there are a few different ways you can craft with and wear glitter so that it doesn’t fall off so easily. Try using Mod Podge to seal in the glitter in your crafting projects, or mix cosmetic-grade glitter with different beauty products to create your own body glitter.







Using Mod Podge for Crafts.



Add a layer of satin or gloss Mod Podge to your craft. Use a foam brush or paintbrush, depending on your craft, and lightly brush a thorough layer of Mod Podge onto the surface area of whatever you are looking to cover in glitter. Make sure the entire area is coated and that there are no bare spots.

You can even make your own Mod Podge at home to save money!

If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time.

Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.



Dust, pour, or poof the glitter over the Mod Podged area. Depending on the kind of glitter you are using, you might apply it in a slightly different way. The main thing to remember is that you want to completely coat the Mod Podge in glitter and not leave any empty spaces.

You can also use a foam brush to spread on your glitter if you want a little more control over how much you use.

If you are looking for a high-glitter outcome, you can apply a second layer of Mod Podge and glitter immediately after the first one without waiting for it to dry first (it will take a little longer to dry after the second coat, then, but it will be highly glitterized).



Allow the glitter and Mod Podge to dry for 1-2 hours. Leave your newly glittered item alone for several hours or until it is dry to the touch. Try to leave it in a position so that the Mod Podge and glitter isn’t touching any other surface.

If you are adding glitter to multiple items, this is a great time to continue working on those projects while you’re waiting for others to dry.



Apply a top layer of Mod Podge to seal in the glitter. Once the first layer is dry to the touch, use your sponge or paint brush to add another thin layer of Mod Podge to your item. Use long, even strokes to reduce the appearance of brush lines. Make sure you cover the entire item and don’t leave any raw glitter poking through.

You could also use watered down school glue to create an opaque sealant for your crafting project.

The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.





Let your finished craft dry for 3-4 hours before you use it. Depending on how thickly you applied the Mod Podge, you may need to wait anywhere from 3-12 hours before you can safely use the item without potentially messing up the application. Always check the directions on the bottle for tips and guidelines.

If you have a dehumidifier, you can set your craft in front of it for a speedier drying time.

Never place your item directly in front of a heat source, like an electric heater or a hair dryer, as this may cause the Mod Podge to melt or change consistency so it doesn’t dry correctly.



Coat flaking items with sparkle Mod Podge to seal in the glitter. If you have an item that has glitter that is flaking off, you can apply pre-glitterized Mod Podge to add back some sparkle and lock in the remaining glitter. Simply use a sponge or paint brush to apply a thin, even coat of the sealant to the item, then let it fully dry before you use it again.

Make sure to work on a protected surface, like a counter covered in newspaper or paper towels.



Mix Mod Podge with your glitter of choice for a stronger glitter look. Pour some Mod Podge into a disposable cup or bowl and mix in as much glitter as you want to make your own glitter sealant. You can make the glitter as weak or as strong as you prefer. Then follow the instructions to apply the Mod Podge and let it dry.

You can also apply your glitter Mod Podge, another layer of glitter, and then top it off with the glitter Mod Podge again for even more glitter fun.









Wearing Body Glitter.



Combine body oil and loose glitter for an all-body glitter-wearing option. Instead of sprinkling loose body glitter on your arms and hoping it doesn’t fall off, combine body oil and loose glitter in a travel-sized shampoo container. Shake the container up really well, and then apply it to your arms, legs, chest, or face whenever you need an extra glitter boost.

While you could purchase body oils or lotions that already have glitter in them, it can be less expensive and more fun to do it yourself.



Put petroleum jelly on your skin and add body glitter for a sparkly look. Use a clean makeup or paint brush and apply an even layer of the petroleum jelly to the area you want to cover in glitter (like your collar bones, shoulders, or even your hairline). Then use another clean brush or your hand to gently press loose body glitter onto the jelly.

Visit a cosmetics store to buy body-specific glitter, which is usually a slightly different consistency than the glitter used for crafting.

If you don’t have petroleum jelly, you could also use hair gel as the sticky base for your body glitter.

Use this method in areas that aren’t going to come into frequent contact with other surfaces. For example, it probably wouldn’t work well on your legs if you are going to be sitting and standing and walking around often.



Mix hairspray and glitter to create glitter brow and hair gel. Spray hairspray into a dish, like a small cup or bowl (or even a disposable Dixie Cup), and add loose glitter. Mix it around with a toothpick or a spoolie brush, and then apply it carefully to your eyebrows or to select strands of your hair.

Do not use the glitter and hairspray mix on your eyelashes as it could irritate or infect them.



Wear vibrant lipstick and then add loose glitter for a shimmery lip look. Steer clear of sticky or glossy lipsticks and stick with a cream base to keep the glitter in place better. Put on a layer or two or lipstick, then use your fingers to gently press loose glitter into your lips.

With this trend, you’ll want to avoid pressing your lips together or eating or drinking anything too messy.



Create a glitter stamp from a makeup sponge and loose glitter. Cut a makeup sponge into a fun shape (like a heart or a star) and dip one side of it carefully into loose glitter. Spread a thin layer of petroleum jelly or hair gel on your body where you want the stamp, and then press the makeup sponge onto the jelly to transfer the glitter.

Your glitter stamp should stay on all day as long as it doesn’t brush up roughly against anything else.







Keeping Glitter on Clothes.



Use hairspray for a quick fix on your glitter clothing. Take your item of clothing outdoors or to a well ventilated area, and lay it down completely flat. Then spray a light coat of hairspray overtop of the glitter. Use unscented hairspray if you can. Allow the hairspray to dry completely before you wear the clothing item.

Hairspray is a great, quick fix, but overtime it doesn’t hold up, though you can reapply hairspray when you need to. Long-term, you just have to care for and store glittery clothes very carefully.



Affix glitter to your clothes with fabric glue. Lay out your item of clothing in a clean workspace, and apply the fabric glue in whatever patten you want. Then, carefully shake loose glitter overtop of the glue, coating it so that none of the glue is visible. Let the glue and glitter dry for several hours before picking up the item and shaking off the excess glitter.

You could even make a stamp out of a sponge and decorate your shirt that way (like stars all over a t-shirt), and then shake the glitter on top of the design.



Wash glittery clothes sparingly and let them air-dry. When you go to clean your clothes that have glitter on them, try to wash then only when they really need it. Use cold water and the delicate cycle in the washing machine, and don’t put them into the dryer. Instead, hang them up to air-dry.

You could even take your glittery clothes to a dry cleaner instead of washing them yourself.



When crafting with glitter, try working over a cooking tray. You’ll catch all the excess glitter that falls off and can easily return it to its container.

When making your own body glitter, try to use cosmetic grade glitter rather than crafting glitter.

Store your glittery clothes in plastic bags to protect them from rubbing up against other items in your closet (and to protect your other clothes from getting glitter all over them).





Things You’ll Need.

Crafting with Glitter and Mod Podge.

Mod Podge (satin, gloss, or glitter).

Foam brush or paintbrush.

Disposable cup or bowl.

Craft glitter.

Wearing Body Glitter.

Makeup or paint brush.

Petroleum jelly.

Hairspray.

Lipstick.

Makeup sponge.

Body oil.

Cup or bowl.

Cosmetic grade body glitter.

Keeping Glitter on Clothes.

Hairspray.

Fabric glue.

Plastic baggies.

November 08, 2019

how to make a jack in the box

How to Make a Jack in the Box.

A Jack in the Box is a fun toy that's been around for hundreds of years. While it may seem complex, a Jack in the Box actually works with very simple mechanics. Making your own can be a fun arts and crafts activity. With some cardboard, glue, magnets, a spring, and a few other parts, you can make your very own Jack in the Box.







Part 1 Constructing the Box.



Find a sturdy piece of cardboard. You'll need a thick and sturdy piece of cardboard for the box to support itself. The kind from a large packing box should work well.

You'll be cutting out 6 squares that are each 6" x 6" (15 cm x 15 cm), so your piece of cardboard will need to be at least 18" x 12" (45 cm x 30). If you can't find a piece that big, then several pieces will work fine too.



Draw six 6" X 6" (15 cm x 15 cm) boxes on the piece of cardboard. These six squares will form the walls, floor, and lid of your Jack in the Box. Use a ruler to measure and make sure your lines are straight.

Make sure you use a dark pen or marker. Otherwise, you may not be able to see your lines when you cut.



Cut out each box. Use a pair of sharp scissors or a box cutter. Carefully cut along the lines you drew so the cardboard squares are the right size. If you're using a box cutter, make sure the cardboard is placed on a solid surface.

Wear gloves during this step to prevent paper cuts or any injuries for the scissors or box cutter.



Glue 4 of the squares together, making a cube with no top or bottom. Hot glue is the best choice for this step. White glue won't be strong enough to keep the box together. This forms the outside structure of the box.

Glue the edges of the cardboard together to form the cube. If the glue doesn't seem to be making a strong seal, you can use strips of tape to secure the cube while the glue hardens.



Glue another square to the bottom of the cube. Line up the square perfectly with the rest of the cube or your box will be uneven. This will form the floor of the box.

Lay the square down flat and put glue around the edge. Then slowly lower the box onto the square, making sure the glue makes contact with all edges of the box.



Make a hinge with the final square. Don't glue the final square to the box, or your Jack in the Box won't open. Instead, rest the square on top of the box, making sure to line up all the sides. Then, use a strip of tape to fasten one side of the square to the box. This will form a simple hinge that allows your box to open.

Clear tape is the best choice here. Colored tape might throw off your designs when you decorate your box later on.







Part 2 Sealing the Box.



Find 2 small magnets. There are lots of ways you could make the seal for your box, but a simple method uses magnets. Start by finding 2 magnets. These should be square or circle and small, not more than 1 inch (2.5 cm) long.

Craft or hardware stores usually have small magnets that are meant to hold boxes or cabinets closed. Looking for these should give you a good start.

Remember to find out which sides of the magnets attract each other. Those are the two sides you'll line up when making your seal.



Glue one magnet to the bottom of the box's lid. This should be on the opposite side where you placed the tape. On the edge of the lid and in the center, glue the first magnet.



Glue another magnet directly under the first magnet. The next magnet should be placed on the inside wall of the box so the two magnets touch each other when the lid is closed. In this position, they will attract each other and keep the box sealed.

To find the right position for the second magnet, start by closing the box slowly. This way you'll be able to see where the magnet will rest when the box is sealed. The best place for the second magnet is right under that point, so the two magnets touch when the lid is closed.



Test out your seal. See if your seal is holding after you glue both magnets. Pull up slightly to see how tight the seal is. Flip the box upside down and see if it holds.







Part 3 Making the Spring Puppet.



Glue a compression spring to the bottom of the box. Draw a circle in the middle of the box's floor to see where you'll place the spring. Then put glue on the bottom of the spring and place it over the circle you drew. Hold the spring down for a few seconds to make sure the glue seals.

Compression springs come in lots of sizes. For this project, you'll want one that's slightly taller than the box, or about 7 inches (18 cm). Your local craft store should have plenty of options.

Test the seal by making sure the box stays closed when the spring is in place. If the box doesn't stay closed, your spring is too big or your seal is too loose.



Put a sock puppet on the spring. Your Jack in the Box needs a character to pop out! A sock puppet is perfect because it can fit snugly over the spring.

You could also draw and cut out a simple face from a piece of paper and glue it to the top of the spring for a simpler design.



Test your box. With all the pieces in place, it's time to make sure your box is working! Put it on a table and lift up the lid. Your puppet should pop out of the box when you do this.



Decorate your box. Now that your box is complete, you can decorate it however you want! Use markers to draw on its sides, glue sparkly paper over it, cover it with stickers--use your imagination!





Tips.

Remember to let all glue dry before you move on. Wait a few minutes after you glue pieces together to make sure the glue holds or your box could warp as you work.



Things You'll Need.

Cardboard.

Hot glue.

Scissors.

Ruler.

Clear tape.

Gloves.

Pen or marker.

Compression spring.

Magnets

November 18, 2019

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019

diy cat scratching post for your feline friends

diy cat scratching post for your feline friends

DIY Cat Scratching Post

More often than not, cats can be found lounging in the sun or snoozing the day away. But don’t let them fool you—they love to play. Cats love climbing, chasing, and jumping just as much as any other pet.



But all the climbing and scratching can lead to wear and tear. Instead of sacrificing your beloved couch or armchair, find some enriching toys to give your feline to keep them happy and healthy. That way, everyone can live in peace.



While perusing the pet store shelves, you may notice that most toys, treats, and beds are lacking in style. For some reason, a lot of pet products are behind the curve when it comes to aesthetically pleasing design. With DIY, you can maintain your dream home’s modern decor while giving your pet everything you need.



This DIY scratching post is sure to please your furry friend. Plus, it will look great hanging on your wall! Say goodbye to boring beige cat furniture.



Gather Your Supplies

This DIY requires a few easy-to-find supplies. To make it even more budget-friendly, head to a second-hand store to find a frame. You can easily upcycle it at a low cost.



Here’s what you’ll need:



Small rug



Scissors



Measuring tape



11" x 14" picture frame





Measure and Cut Your Rug

You may not even have to head to the store to find the carpet material for this project. If you remodeled your home, you likely already have some leftover carpet in the garage.



But if not, you can find carpet samples at local carpet retailers. Or you can use an indoor/outdoor decorative rug (like the one we used), a door mat, or even a bath rug. Just be sure your material isn’t unraveled or damaged—that’s the cat’s job.



Before using your scissors to cut your carpet, use a measuring tape to measure the size of the picture frame. Then, use those measurements to cut a rectangular section of your carpet that will fit perfectly inside the picture frame. If the first try isn’t perfect, just keep trimming away.



Your regular pair of scissors will sometimes work for this, but it depends on the material you use. If it’s difficult to cut with scissors, try using sharp shears.



Secure in Frame

Once you have cut your material to match the size of your frame, it’s time to secure them together.



First, remove the sample photo and glass cover from your picture frame. These parts aren’t necessary and you can keep them for future crafts or recycle them if you have no use for them.



If your picture frame has a kickstand on the back, it may be necessary to remove it. This frame will be hung on the wall and a kickstand on the back may make it too bulky, causing it to stick out when it’s hung up.



Secure your piece of rug or carpet inside your picture frame. Be sure to apply the cardboard backing piece that came with the frame onto the back to make sure things stay in place.



Display

The moment we’ve all been waiting for is here! Now that your DIY is finished, you’ve got an adorable piece of wall decor that looks great and satisfies your kitty to no end. Every cat will appreciate this fun toy. And when it wears out, just replace the material inside to keeping things looking new.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019