how to make a paper penguin using an origami penguin

How to Make a Paper Penguin Using an Origami Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases. Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

9. Fold the top half over. With the reverse fold out of the way, you want to take the corner pointing right—just the top layer not both layers—and fold it back on itself. Fold it so that the flat side just above the corner lines up flush with the flat vertical line on the left side of the paper. Make a crease here, but do not unfold the flap. Leave it folded.

10. Turn the page over and make the same fold on the other side. You now want to turn the paper over completely and make the same fold you just made but from the other side. In other words, fold the other corner (the bottom layer from the previous step) over so that its upper edge is also flush with the same flat side of the page.

Especially if you're using a two-colored sheet of paper, this step will make more sense because the form of the penguin will start to become more apparent as the black side of the page will face outward on both sides. As the project continues to take shape, these will be the wings.

11. Turn the paper over again. To prepare for the next major fold, you will need to turn the whole paper over again. When you do, you want to orient the paper so that the really narrow point is pointing upward.

12. Fold the narrow point over to the left. With the paper oriented so that the long, narrow point face up, take that point and fold it over at a 45° angle so that the point now points to the left. You'll see how this fold starts to take shape as the penguin's beak. After making the crease in this fold, return the point to the upward position.

13. Reverse-fold along the crease you just made. This step requires you to make an outside reverse fold along the crease you made in the last step. An outside reverse fold is slightly different from the earlier reverse fold. To make the fold, unfold the paper along the black side slightly, and poke your finger from the white side at the fold you made in the last step. When the creases reverse direction, simply reform the fold so that the two black sides of the sheet are in contact again.

Once again, reverse folds can be a bit difficult to describe.

14. Fold the wing over. Though clearly visible now, the wings won't quite look perfect yet. Take the wing on the side facing up and fold it over so that the white side faces out. You'll fold it back so that the corner which was facing the bottom left now points to the right. Pull it back far enough so that it's just shy of where the little tail is at the bottom of the paper.[

15. Fold the wing back over on itself. Once you've made the crease from the previous step, fold the wing back over on itself so that the black side is once again facing up. Fold it so that the tip of the corner is just shy of touching the horizontal white edge at the bottom of the body.

16. Makes a rabbit's ear fold. To make the rabbit's ear fold, lift the portion of the wing you just folder and reverse the crease from the last step, but only at the bottom of the crease and only at the depth of roughly the tip of your finger. This will makes the bottom tip of the wing into a little flap though the flat edge will still be parallel to the rest of the wing.

17. Repeat steps 14-16 for the other wing. With one wing complete, you're ready to turn the page over and repeat the same steps to form the other wing. Simply use the same folds from steps 14-16 but on the other side.

18. Tuck in the points at the bottom. The bottom of the penguin will still have points sticking out in a slightly misshapen way. Fold each of these points toward the inside of the penguin to make a flat, horizontal bottom to the body. Once you tuck these flaps up, you have your penguin!

Desember 22, 2019

how to organize craft supplies

How to Organize Craft Supplies.

If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.







Steps.



1. Locate all of the craft supplies that you own.

If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.

Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.



2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.

Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.

Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.

Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.



3. Sort out all of the supplies that you have into smaller groups.

Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.

Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,



4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.

Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.

If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.

Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.



5. Keep on sorting.

Sort a little bit whenever you start or finish a project or get new supplies.

Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.



6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.

Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.

For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.



7. Repeat this process with different containers until everything is filed away.



8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.



9. Finished.





Tips.

Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.

Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.

Put things where they'll be handy when you need them, and where you think you'll look for them.

Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.

Most importantly, find your own balance between creativity and control.

Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.

Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.

Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.

Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.



Things You'll Need.

Craft supplies.

Multiple containers depending on the amount of supplies.

Paper to label the containers.

November 21, 2019

how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make a paper penguin

How to Make a Paper Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases.  Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

Januari 22, 2020

how to make a jack in the box

How to Make a Jack in the Box.

A Jack in the Box is a fun toy that's been around for hundreds of years. While it may seem complex, a Jack in the Box actually works with very simple mechanics. Making your own can be a fun arts and crafts activity. With some cardboard, glue, magnets, a spring, and a few other parts, you can make your very own Jack in the Box.







Part 1 Constructing the Box.



Find a sturdy piece of cardboard. You'll need a thick and sturdy piece of cardboard for the box to support itself. The kind from a large packing box should work well.

You'll be cutting out 6 squares that are each 6" x 6" (15 cm x 15 cm), so your piece of cardboard will need to be at least 18" x 12" (45 cm x 30). If you can't find a piece that big, then several pieces will work fine too.



Draw six 6" X 6" (15 cm x 15 cm) boxes on the piece of cardboard. These six squares will form the walls, floor, and lid of your Jack in the Box. Use a ruler to measure and make sure your lines are straight.

Make sure you use a dark pen or marker. Otherwise, you may not be able to see your lines when you cut.



Cut out each box. Use a pair of sharp scissors or a box cutter. Carefully cut along the lines you drew so the cardboard squares are the right size. If you're using a box cutter, make sure the cardboard is placed on a solid surface.

Wear gloves during this step to prevent paper cuts or any injuries for the scissors or box cutter.



Glue 4 of the squares together, making a cube with no top or bottom. Hot glue is the best choice for this step. White glue won't be strong enough to keep the box together. This forms the outside structure of the box.

Glue the edges of the cardboard together to form the cube. If the glue doesn't seem to be making a strong seal, you can use strips of tape to secure the cube while the glue hardens.



Glue another square to the bottom of the cube. Line up the square perfectly with the rest of the cube or your box will be uneven. This will form the floor of the box.

Lay the square down flat and put glue around the edge. Then slowly lower the box onto the square, making sure the glue makes contact with all edges of the box.



Make a hinge with the final square. Don't glue the final square to the box, or your Jack in the Box won't open. Instead, rest the square on top of the box, making sure to line up all the sides. Then, use a strip of tape to fasten one side of the square to the box. This will form a simple hinge that allows your box to open.

Clear tape is the best choice here. Colored tape might throw off your designs when you decorate your box later on.







Part 2 Sealing the Box.



Find 2 small magnets. There are lots of ways you could make the seal for your box, but a simple method uses magnets. Start by finding 2 magnets. These should be square or circle and small, not more than 1 inch (2.5 cm) long.

Craft or hardware stores usually have small magnets that are meant to hold boxes or cabinets closed. Looking for these should give you a good start.

Remember to find out which sides of the magnets attract each other. Those are the two sides you'll line up when making your seal.



Glue one magnet to the bottom of the box's lid. This should be on the opposite side where you placed the tape. On the edge of the lid and in the center, glue the first magnet.



Glue another magnet directly under the first magnet. The next magnet should be placed on the inside wall of the box so the two magnets touch each other when the lid is closed. In this position, they will attract each other and keep the box sealed.

To find the right position for the second magnet, start by closing the box slowly. This way you'll be able to see where the magnet will rest when the box is sealed. The best place for the second magnet is right under that point, so the two magnets touch when the lid is closed.



Test out your seal. See if your seal is holding after you glue both magnets. Pull up slightly to see how tight the seal is. Flip the box upside down and see if it holds.







Part 3 Making the Spring Puppet.



Glue a compression spring to the bottom of the box. Draw a circle in the middle of the box's floor to see where you'll place the spring. Then put glue on the bottom of the spring and place it over the circle you drew. Hold the spring down for a few seconds to make sure the glue seals.

Compression springs come in lots of sizes. For this project, you'll want one that's slightly taller than the box, or about 7 inches (18 cm). Your local craft store should have plenty of options.

Test the seal by making sure the box stays closed when the spring is in place. If the box doesn't stay closed, your spring is too big or your seal is too loose.



Put a sock puppet on the spring. Your Jack in the Box needs a character to pop out! A sock puppet is perfect because it can fit snugly over the spring.

You could also draw and cut out a simple face from a piece of paper and glue it to the top of the spring for a simpler design.



Test your box. With all the pieces in place, it's time to make sure your box is working! Put it on a table and lift up the lid. Your puppet should pop out of the box when you do this.



Decorate your box. Now that your box is complete, you can decorate it however you want! Use markers to draw on its sides, glue sparkly paper over it, cover it with stickers--use your imagination!





Tips.

Remember to let all glue dry before you move on. Wait a few minutes after you glue pieces together to make sure the glue holds or your box could warp as you work.



Things You'll Need.

Cardboard.

Hot glue.

Scissors.

Ruler.

Clear tape.

Gloves.

Pen or marker.

Compression spring.

Magnets

November 18, 2019

how to make a dog out of mardi gras beads

How to Make a Dog out of Mardi Gras Beads.

After a good celebration, you might find yourself with a whole bunch of leftover plastic bead necklaces. This simple craft is a cute and easy way to make use of these beads. They are made just like balloon animals, by twisting the necklace into the right shape.

Method 1 Bead dog.

1. Find the two beads melted together to form the join on the bead necklace. Give this a tug to break it. Then snip off the two "bad" beads with the melted sides.

2. Cut a string of beads twelve beads long and another two beads long. These pieces will form the body and the ears.

3. Twist four beads together behind the second bead on the long string. This will make a little square. One bead should be sticking up. This is the tail of the dog.

4. Do the same thing to the other side of the long piece except that after you twist the beads, 2 beads should be sticking out for the head. You should have one bead in between the the two sets of little squares.

5. Wrap the two beads behind the first bead on end with the two beads sticking out. This will make the ears and completes the dog.

6. Finished.

Method 2 Mardi Gras bead poodle.

1. Cut four segments from the plastic bead necklace. Cut one segment with 4 beads and three segments with 2 beads.

2. Lay out the 4-bead segment. Pick up one of the smaller segments.

3. At the space between the tip of the 4-bead segment and the second bead in that same segment, pull the small segment up so that the small segment crosses in between the beads on both segments.

4. Tighten the ears. Do this by twisting them around once.

5. Repeat with the other 2-bead segments. Except, this time, pull the small segments down instead of up, so that the ears stick up. The the legs point will also down, so the dog can stand.

6. Completed. This now makes a fine poodle.

Question : Method 2 looks too cartoonish, so I cannot see the character of the poodle. Please help.

Answer : Because of the size of the beads, the final project is the equivalent of a stick figure drawing in method 2. Method 1 is a basic "dog." To make a larger animal, it requires the beads to be supported by a wire frame to give it a realistic shape. Floral wire holds well for this purpose. Use a stick figure design with the wire, then wrap the beads around the wire. Since it is larger, try using the necklace as is for a double strand of beads.

Tips.

There are lots of things that you can do with these dogs such as adding then to a key ring, using in crafts, gluing onto hair accessories or giving them away as party treats.

Warnings.

All beads can be a choking hazard. Make sure to keep them away from small children and pets.

Things You'll Need.

A plastic Mardi Gras bead necklace

Scissors

Januari 17, 2020

how to make colored salt

How to Make Colored Salt.

Colored salt is used for art and craft, for decoration, for teaching skills with writing or drawing, and for making rangoli for Diwali. It's easy to make, and depending on the exact items in your craft or kitchen cupboard, you might even be able to make it without buying a thing.







Coloring Salt with Paint.



Fill a container with salt. A jug or pitcher, a deep bowl, a plastic food container, etc. will all suffice.



Squeeze a little tempera paint into the salt.



Mix with a spoon or other item. Stir until the paint is evenly distributed through the salt.



Let stand overnight to dry.

Make as many more colors as you need for your project. That way, they'll all be ready at the same time.



Test before using. Check that the salt has dried before using in your craft, rangoli, teaching, etc. projects.









Coloring Salt with Liquid Food Coloring.



Use liquid food coloring for this method. Choose a color or colors that you wish to work with.



Tip the salt into a resealable bag.



Add the liquid food coloring to the salt. It's recommended that you do this gradually, a drop at a time, so that you can intensify the color as needed and stop when you're happy with it. The more drops added, the more intense the color.



Carefully press the air from the resealable bag without losing the salt. Seal. Wait for around a minute before proceeding, to give the salt time to settle.

Image titled Make Colored Salt Step 10

5

Press down on the bag again and again. This will move the coloring around all of the salt. Knead until you can see that the color has permeated all of the salt in the plastic bag.



Done. The salt is now ready for use. If you see any salt that is damp, let it dry before use, by allowing air into the bag and waiting a few hours more.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Gel Food Coloring.



For this method, use gel-based food coloring. You should find it dries instantly and won't leave any liquid, which may be the case with liquid food coloring.



Tip the salt into a resealable bag.



Add the gel food coloring. Transfer the gel using an implement such as a wooden or metallic skewer tip, the end of a butter knife or a toothpick. Only use a small amount at a time, adding a little more if you're not yet satisfied with the color. Gel coloring is fairly vibrant with just a little amount, so you don't want to overdo it.



Carefully press down on the bag to remove excess air. Seal tightly.



Shake or knead the color throughout the bag. Ensure that all of the salt is evenly colored.



Done. Given that this is gel, the colored salt should be ready to use immediately.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Chalk.



Choose a chalk color that you wish to use. Chalks come in a range of pastel and bright colors, depending on where you buy them from. Check art, craft or upmarket toy stores for a wider variety than you might find in traditional stationery or dollar stores.



Cover the workspace with a large sheet of paper.



Pour the salt onto the paper. The amount of salt depends on the amount you need.



Place the piece of chalk on its side, on the salt. Roll the chalk back and forth over the salt on the paper. As you do this, the color from the chalk will color the salt. Keep rolling until you're happy with the color.



Using the paper as a funnel, pour the chalk-colored salt into a resealable bag or a storage container.



Done. The colored salt is now ready to use, or you can store it until needed.

Repeat the process for as many colors as desired.



Tips.

A rolling pin can be used to distribute the color for the resealable bag color-distributing methods; ensure that there is no air in the bag and roll it up and down until the salt is evenly colored.

Keep colored salt in an airtight container when not in use. Make sure that the lid is on firmly, to prevent spilling it.

For a bath treat, add some essential oil drops as well as the colorant.

If making a lot of colored salt in varied colors, use clean food containers to free up the usual kitchen containers for your cooking and eating.



Warnings.

While these crafts are non-toxic, they are very messy. As such, they are best either supervised carefully or done by older children and adults.



Things You'll Need.

Salt (sea salt, rock salt, table salt, Epsom salts, etc. are all fine to use).

Container for holding salt or a resealable bag.

Colorant.

Stirring implement (such as a spoon, a skewer, a chopstick, etc.).

Storage container (if relevant).

November 17, 2019

how to make seashell fish easy craft

how to make seashell fish easy craft

You’re home from the beach with a collection of shells.  And now you need something to do with all of them! While we have these adorable seashell creatures on the blog, the kids will love making this school of seashell fish too! They’d look great in a shadowbox frame on your child’s bedroom wall.



Fish made out of sea shells.



SEASHELL FISH.

No trip to the beach this summer? Doesn’t matter! Seashells are readily available at craft stores, but you can also find them at garage sales, thrift stores, and even flea markets. Often times they are sold in big bags, which is how I found most of mine. I always look for them when I’m out at garage sales though!



We love seashell crafts, we even have one for adults, pretty seashell wine charms! They make great party favors or to have just because.





Seashell Fish with googly eyes.



WHAT YOU NEED TO MAKE SEASHELL FISH.

Assorted seashells.

Googly eyes, various sizes.

Hot glue gun or instant grab.



To make these fish, you’ll need seashells in assorted sizes; big ones for the bodies and smaller ones for the fins. You’ll also need googly eyes and some hot glue. You can also use instant grab glue if you prefer not to use a hot glue gun with the kids.



White craft glue is a little harder because it takes longer to dry and the shells may not stay put, so look for a fast drying type.







Lay the shells out first, deciding how you want your fish to look.



Then simply glue them together and add your googly eyes!

November 03, 2019