how to make bottle penguins

How to Make Bottle Penguins.

There are lots of ways to recycle plastic soda bottles, and turning them into adorable penguins is one of them. With a little bit of paint, time, and creativity, you can turn 2 plastic soda bottles into an adorable penguin. If you have a lot of plastic soda bottles then you can create an entire penguin family!

Part 1 Assembling the Base.

1. Find 2 plastic soda bottles. The large, 2-liter (67.2-oz) bottles will work the best for this, but you can use smaller soda bottles too. Look for the kind that have the 4 bumps on the bottom. These bumps will make the feet and the hat.

The color of the bottles does not matter. You will be painting it.

2. Remove the labels and wash the bottles. Peel the labels off first, then wash the bottles inside-out with soap and warm water. Be sure to remove all sticker residue. Dry the bottles with a towel.

Wipe the bottles down with rubbing alcohol as well. This will remove any oils that might keep the paint from sticking. Let the bottles dry; this should only take a few seconds.

3. Cut the bottles in half and recycle the top sections. A craft blade will work the best for this, but you can do it with a sharp pair of scissors too. Young children should be supervised during this step.

If the cut edge is jagged, cut it smoother with a pair of scissors.

For a smaller penguin, cut the bottom 2 to 3 inches (5.1 to 7.6 cm) off of the first bottle, and cut the second bottle in half. The shorter half will make the bottom.

4. Tuck 1 bottle inside the other to make a capsule. Turn the bottles so that the cut edges are facing one another. Slide the first bottle into the second bottle by about 1⁄2 to 1 inch (1.3 to 2.5 cm). If the bottles won't fit inside one another, cut a 1⁄2 to 1 in (1.3 to 2.5 cm) slit into 1 of the bottles first; place this edge on the inside.

Make sure that the 4 bumps on the top and bottom of the capsule line up.

5. Glue the bottles together, if desired. If the bottles are loose, glue them together with tacky glue or super glue. Pull the bottles apart, and paint the inside rim of 1 bottle with glue. Slide it over the other bottle.

Hot glue is not recommended because it is too bulky.

Alternatively, you can keep the bottles loose, and use the penguin as a gift box.

Part 2 Painting the Penguin.

1. Paint the entire capsule black, then let it dry. Take the capsule outside or into a well-ventilated area. Set it down on a sheet of newspaper, then coat it with black spray paint. Let the paint dry for 15 to 20 minutes, then turn the capsule over. Spray paint the bottom and let it dry completely.

Hold the can 8 to 10 inches (20 to 25 cm) from the capsule, and spray using a side-to-side motion.

If the paint is too thin, let it dry completely, then apply another coat of paint.

If you don't have spray paint, paint the capsule using black acrylic craft paint and a paintbrush.

2. Paint the penguin's face and belly white, then allow them to dry. Use a pointed paintbrush and white acrylic craft paint to outline the white face and belly of the penguin. Fill your outline in using a flat paintbrush. Let the paint dry, then add another layer if the first layer is too thin. Let the second layer dry too, if you added it.

Look at pictures of real or cartoon penguins to get ideas for the placement of the white parts.

Make sure that 2 of the bumps on the base of the capsule line up with the bottom of the penguin's belly. These are its feet!

If you are making a smaller penguin, use the shorter half to make the bottom.

3. Give the penguin a widow's peak, if desired. Use a pointed brush and black acrylic craft paint to draw a V-shape at the top of the penguin's white face. Fill the V-shape in with black paint so that it blends in with the body. For an even nicer finish, made the sides of the V-shape curved so that it looks like Mickey Mouse's widow's peak. Let the paint dry before moving on.

4. Paint 2 eyes and a beak using acrylic craft paint. Use a yellow upside-down triangle for the beak, and 2 black dots for the eyes. For a more realistic beak, paint a yellow or orange circle, then draw a horizontal black line going through the middle.

Look at pictures of cartoon penguins to get ideas.

You can also hot glue 2 buttons or 2 googly eyes for the eyes.

If you don't have yellow paint, cut a triangle out of yellow paper, and glue that on instead.

Part 3 Adding Optional Details.

1. Give your penguin character with lashes, eyebrows, and/or blush. You don't have to do any of these, but they can really give your penguin personality. Use a very thin brush for the lashes and/or eyebrows, or a paint pen. Use a larger pointed brush to apply pink paint for the blush.

If you want to give your penguin visible yellow feet, paint the 2 bumps in the front (under the white bellow) with yellow acrylic craft paint.

2. Paint the top half of the bottle to turn it into a hat. The 4 bumps on top of your penguin's head can easily turn into a hat. Paint a line around the penguin's head, just above the eyes, then fill in everything above that line. Use whatever color you want.

If you have a molded line just below the bumps, you can use that as a guide instead.

3. Let the hat dry, then add some details. You can make the hat look more hat-like by painting or drawing some stripes or spots onto it. Use a thin, pointed paintbrush and acrylic craft paint in a contrasting color to do this. Let the paint dry when you are done.

Use a paint pen for thin stripes or small dots.

4. Glue a pompom to the top of the hat, if desired. You can make the pompom yourself out of yarn, or you can buy it from the kids section of a craft store. Hot glue the pompom to the top of the hat, right between all 4 bumps.

Choose a pompom color that matches the designs on your hat. If you did not add designs, then use a contrasting color instead.

5. Tie ribbon around the neck to make a scarf. Find some ribbon that goes well with the hat. Wrap the ribbon around the penguin's neck, then cross the left end over the right end. Bring the left end up through the gap, then tighten it. This is just like starting to tie a pair of shoes!

Glue both ends of the ribbon to the penguin so that they stay down.

If you are turning this into a gift box, make sure that you keep the ribbon below the seam.

You can also cut a long, skinny strip out of felt, and use that instead of ribbon. Cut fringes into each end for additional charm.

Question : How do we make the eyes?
Answer : Cut out two small black circles, and two slightly larger yellow circles. Glue the black circles onto the yellow circles, and glue those onto the white face.

Question : We don't have to remove the bottle cap?
Answer : If you have removed the cap, you will have to tape or otherwise plug the hole on the top to "sculpt" the rounded top of the head on, so it is not recommended to remove the cap. However, taping or a cork replacement can be used.

Question : Can I use a plastic bottle?
Answer : Yes, but it may be hard to paint.

Tips.

If you want your penguin to have a pointy hat, discard 1 of the bottom halves and keep 1 of the top halves. Use the top half as the hat.

Use paintbrushes made from sable or taklon bristles. Do not use boar bristle, horsehair, or camelhair.

Spray the penguin with varnish or sealer, if desired. Do this after you finish painting, but before you add pompoms and scarves.

You can spray the capsule with paint primer first to help the paint stick better.

If you are worried about the paint chipping, spray the capsule with paint primer before you start painting.

Warnings.

Use low-temp hot glue guns to avoid blisters and burns. Do not use high-temp hot glue guns.

Things You'll Need.

2 plastic soda bottles, Craft blade, Black spray paint, Acrylic craft paint (white, yellow, and black).

Acrylic craft paint, 2 contrasting colors, Flat and pointed paintbrushes, Ribbon or felt, Pompom, Hot glue, Tacky glue or super glue.

Januari 23, 2020

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019

how to decorate plastic containers

How to Decorate Plastic Containers.

From pill boxes to room organizers, plastic containers are an essential part of everyday life. Though they do their job well, these containers are generally designed with simplicity in mind, meaning there’s plenty of room to decorate. Using simple materials like paper, stickers, paint, and ribbon, you can turn any plastic container into something truly fabulous.







Method 1 Covering with Patterns and Colors.



Use patterned cloth to cover the container. Find a cloth pattern that matches your style and cut out enough to cover the container. Use a paintbrush to apply a layer of mod podge to both the back of the cloth and the plastic, then press your cloth into it. As it sets, apply another layer of mod podge over the top and let it dry.

Try to tie the patterned cloth into the room itself, such as using polka-dotted fabric in a room with polka-dotted wallpaper or zebra-striped cloth in a room with black and white furniture.



Use patterned paper to line the container. Patterned paper works great for containers that are translucent. Find a pattern you like and cut out enough to line the plastic. Smooth out the paper and apply a layer of mod podge to both it and the inside of the container. Stick it to the plastic and apply another coat on top, making sure the paper remains smooth.

Try to use colors that match the container’s environment, like bright pastels for a baby room or light, muted colors for a kitchen.



Use paint to add color to your container. Wash your container with dish soap and warm water. When dry, gently sand the surface with 220 to 300-grit sandpaper, then wipe it down with rubbing alcohol. Use painter’s tape to cover areas you don’t want to paint, then apply a coat of primer to the container. Once it has dried, you will be able to paint the plastic with spray, acrylic, or enamel paint.

Use stencils to paint or spray specific designs onto your container, such as zig-zags or checkerboards.



Use patterned duct tape as a simple decoration. Duct tape is an incredibly versatile tool, and since it comes in many different colors and patterns, it provides a quick solution for spicing up drab plastic. Find a pattern of duct tape you like and simply press it onto the container. For small and portable containers, a small amount of duct tape will add personality without bulk.







Method 2 Using Creative Labels.



Cut out labels to create a simple organizing system. Sometimes, the best way to decorate a container is to simply label it, especially if you need to use it in a professional environment. Cut a piece of single-colored construction paper into a thin strip, then write a label on it in clear, bold letters. Fix the label to your container using tape or glue.

To make your labels pop, glue them to a slightly larger piece of colored paper before putting them on the container.



Add lettering to create labels and messages. For larger containers, craft lettering may be a good option. If your letters come with adhesive backs, apply them as is. If they don’t, use a small amount of glue to keep them in place. Along with names and standard labels, letters can be used to write:

A motivational message for containers holding school supplies.

A favorite quote or book passage for a media box.

A joke label, like the word ‘Zoo’ for a container filled with stuffed animals.



Print labels from a computer. Creating labels on a computer allows you to add anything from photos and graphics to small and instructional text. Programs like Word and Pages can create simple labels with borders, while more advanced programs like Adobe InDesign may be appropriate for specialized labels. When you have a design made, print it on thick paper, cut it out, and glue or tape it to your container.



Label your container with objects from inside it. If your container will be holding craft items, toys, or other small, non-perishable objects, use them to create a unique label. Instead of writing “LEGOs” on a plastic box, glue a couple bricks to the front. Instead of writing “Office Supplies,” glue a binder clip or marker.









Method 3 Accessorizing.



Add ribbon to your container. Ribbon and similar trims can give your container a more elegant feel. They can be applied using mod podge, hot glue, or tape, and some ribbon can simply be tied around the plastic. Look for ribbon designs that match the contents of the box, such as silver ribbon for keepsakes or colorful ribbon for candy.



Add stickers to your container. Stickers are a great, fast way to cover a plastic container. Simple stickers, like those found in dollar stores and craft books, are perfect and come in a variety of styles. Avoid bubble and 3D stickers if you plan on storing your container in tight spaces.

If your container holds a collection, put down a new sticker every time it grows.



Use hot glue to create glitter designs. When handled right, hot glue can be a fun alternative to traditional paint. Use a small marker to draw a design on your container. With a hot glue gun, carefully trace over it. Before the glue sets, pour glitter over it and let the whole thing dry. Shake off excess glitter and enjoy the shiny, fun design.

This method can also be used to label your container. Simply spell out a word, pour glitter on it, and let it set.



Use ink stamps to press patterns into the plastic. To give your container an old school feel, use ink stamps to create unique patterns and designs. Make sure to press your stamp firmly onto the container, that way the ink sets evenly. Stamps are available at craft stores like Hobby Lobby and Michael’s, and specialty or custom stamps can be ordered online.

Common stamp designs include hearts, religious symbols, fruits, and simple animals. Try to find one that matches the container’s environment.



Add craft jewels, flowers, and other items. Craft jewels, fake flowers, and other small objects are an easy way to add some fabulous flair to your container. Use hot glue or a bedazzling gun to apply the objects to the plastic. If you don’t have enough to make a uniform pattern, try arranging them in small shapes or designs, such as a heart or smiley face.



Create a collage on the container. If your container will be holding something particularly special, use its surface for a collage. This will make your container beautiful while clearly showing what it contains. Cut out portions of photos, magazines, newspapers, and similar printed materials. Using either hot glue or mod podge, paste individual items to the box, making sure they are flat and smooth. Some potential arrangements include.

Photos of your family or best friends, especially if your container is a keepsake box.

Pictures of book covers, movie posters, or album artwork, especially if your container is a media box.

Pictures of your favorite celebrities and characters.

November 18, 2019

how to paint wood crafts

How to Paint Wood Crafts.

Many arts and craft stores sell blank wooden pieces that you can paint. While you can always paint them right away, there are a few steps that you can take to ensure a neater, longer-lasting finish. Sanding the piece first will get rid of any ridges, while priming it will help the paint stick on better. Adding a coat of sealer will protect all your hard work, and help it last for years to come.





Prepping the Wood.



Sand the surface of the object with 140 to 180-grit sandpaper. You can do this with a sanding sponge or with a piece of sandpaper; a sanding sponge will work the best on curved surfaces, however. Also, make sure that you are sanding with the grain of the wood, not across it.

Some wooden pieces from craft stores come pre-sanded. If the surface area is completely smooth, skip this step.



Wipe the dust away with a tack cloth. A tack cloth is a special, sticky cloth intended for this purpose. You may find it alongside the sandpaper in the craft store or in the hardware store. If you can't find a tack cloth anywhere, try a damp cloth instead.

It would be a good idea to do this, even if you didn't sand your piece; items bought from stores are sometimes dusty, which can prevent the primer and paint from sticking.



Apply a coat of primer. You can use the brush-on kind or the spray-on kind. This will seal the wood surface, and help it take the paint better. It will also help the paint show up better, especially if you are using a light color.

Prime the front and sides first, let them dry, then prime the back.

Image titled Paint Wood Crafts Step 4



Allow the primer to dry before moving on. For an even smoother finish, you can sand the first coat of primer, wipe it clean, then apply more primer over it. Do this a few more times until there no ridges remain.







Painting and Sealing the Wood.



Pour a dollop of acrylic paint onto a palette. Choose a color for the background, then pour out a small amount onto a palette. Acrylic paint dries quickly, so don't pour out your other colors just yet. You can use the cheap, craft-grade acrylic paint that comes in bottles, or you can use the more-expensive artist's grade that comes in tubes. If you are using the artist's grade, dilute it with a few drops of water until it has the consistency of cream first.

You can use small dishes, plastic lids, and paper plates as palettes.



Apply a coat of paint over your piece. Use a foam brush or a wide, flat paintbrush to apply the paint. Let the paint dry, then apply a second coat, if needed. Let this second coat dry as well. Do the front and sides first, let them dry to the touch, then do the back.

Look for brushes made from taklon, katakana, or sable. Avoid camel hair brushes or stiff, bristle brushes.

Don't overload the brush with paint. The paint should come no more than halfway up the bristles.



Let the paint dry, then add a second coat, if needed. How long this takes depends on the brand that you are using. Most types of acrylic paint will dry in about 20 minutes, however. If the paint is too thin, add another coat of paint, and let it dry as well.

Take this time to clean your brush(s) with water. Do not let the paint dry on the brushes.



Add your designs and details. You can use stencils or trace designs onto the wooden piece. You can also free-hand the designs as well. Apply the base color first, let it dry, then add the details. For example, if you wanted to paint a smiley face, you'd paint the yellow circle first, let it dry, then add the smile and eyes.

Dip the brush in water often to keep the paint wet, even if you are using one color.

If you are working with multiple colors, keep a cup of water nearby. Rinse the brush with water before switching to a new color.



Let the paint dry completely. Refer to the label on you tube of paint for exact drying times. Just because something feels dry to the touch does not mean that it is ready to handle or take on sealer. Every brand will be different, but you can expect this to take about 24 hours.



Apply 1 to 2 coats of sealer. Sealers come in many different finishes, including matte, glossy, and satin; choose one that you like the best. Apply a thin coat of spray-on or brush-on sealer, then let it dry. Apply a second coat, if needed, and let that one dry too.

If you are using the brush-on kind, apply it using a wide, foam brush.

If you are using a spray-on varnish, be sure to work in a well-ventilated area.







Trying Other Techniques.



Skip the priming if you want to paint a design over bare wood. Instead, consider painting over the entire piece using a wood stain or a sealer. Wait for the stain or sealer to dry, then paint your designs onto the wood. Be sure to seal everything after the paint dries.



Add designs using stencils. Buy or make a stencil, then place it over the wood. Paint over the stencil using decoupage glue; this will seal the wood and prevent the paint from leaking under the stencil. Let the decoupage dry, then paint over the stencil. Peel the stencil away while the paint is still damp. Seal the wood using a spray-on or brush-on sealer.

You can make stencils using contact paper or self-adhesive vinyl.

You can use this method over bare, unsealed wood.



Use graphite paper to trace designs, then fill them in. Place a sheet of graphite paper over your piece of wood, graphite-side-down. Draw your design, then lift the paper away. Go over the outline using a thin, painted brush, then fill the design in using a flat brush. This method works best over painted wood. You can do it over bare wood, but the paint may not stick as well.

If you don't know how to draw, print the design out on tracing paper first, then place the tracing paper on top of the graphite paper.

If you are working over a dark-colored surface, make some chalk graphite paper instead: cover the back of a piece of paper with chalk, place it chalk-side-down onto the wood, then trace your design.



Create a tinted stain to show off the wood grain. Apply a thin layer of acrylic paint using a dry paintbrush. Dip a wet cloth in a small amount of paint, then rub it over the wood. This will help blend strokes together without covering up the wood grain.

The cloth should be wet, but not dripping.

Alternatively, you can paint over the entire piece using watered down acrylics or watercolor paints.



Make a DIY chalkboard. Paint the surface of the wood with 2 to 3 coats of chalkboard paint. Let the paint dry, then paint designs using normal paint onto it, if desired. Allow the chalkboard paint dry and cure completely. Cover the board with chalk, then wipe the chalk off.

Keep the designs on the edges of the wooden piece so that you can use the surface as a chalkboard.

You do not need to prime a DIY chalkboard, but sanding it would not be a bad idea.





Tips.

You can spray paint the wood first, then paint more intricate designs using acrylic paint.

Remember to prime, paint, and seal the bottom of your piece as well!

It is better to apply several thin coats of paint, primer, and sealer rather than one or two thick coats.

You get what you pay for when it comes to brushes. For the smoothest finish, consider investing in a high-quality brush.

Let the paint and sealer cure for 3 weeks before handling the piece. If you must handle the piece sooner, do so gently and with great care.

Choose your paint colors carefully. Acrylic paint typically dries 1 to 2 shades darker.

Use small, round, pointy brushes for precision and details, and wide, flat brushes for curves and backgrounds.

You don't absolutely have to prime the wood, but it is highly recommended. You can skip this step for a simple, kid's craft project, however.



Warnings.

Wear a dust mask over your face while sanding the wood for added protection.

Always using spray paint or spray-able primers/sealers outside or in a well-ventilated area.



Things You'll.

Wooden object (ie: frame, box, letter, toy car, etc).

140 to 180-grit sandpaper

Primer.

Acrylic paint.

Paintbrushes.

Sealer.

November 10, 2019

how to organize a craft room

How to Organize a Craft Room.

A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.

Method 1 Sorting Your Craft Supplies.

1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’

Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.

2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.

At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.

To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.

3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.

Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.

Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.

4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.

Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.

5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.

Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.

Method 2 Implementing a Storage System.

1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.

Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.

2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.

Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.

Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.

Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.

3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.

4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.

Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.

For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.

Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.

5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”

You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.

6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.

Method 3 Organizing Your Space for Creative Inspiration.

1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.

In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.

2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.

3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.

4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.

To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.

5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.

6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.

Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.

Tips.

You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.

Warnings.

Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.

November 25, 2019

how to paint a row of bird houses in watercolor

How to Paint a Row of Bird Houses in Watercolor.

Bird houses can be as plain or as ornate as houses for people, but, as a subject for an art work, they are a lot less intimidating. While we enjoy seeing and thinking about homes for birds, we might live where it is impractical to install an actual bird house. The solution is to paint a picture of bird houses. Because of its simplicity, this project is virtually fail proof, even for a non-artist. So, go ahead, tackle architecture, but begin on a bird's scale.



Steps.

1. Cut a rectangle of 140 lb. cold pressed watercolor paper and draw a pencil line 2" (5cm) up from the bottom edge to create a base for the houses to stand on.  Later, you can paint this to represent a limb of a tree or a platform.

2. Draw a simple house starting with a square 3½ in (10cm) on a side, in pencil to represent the body of the house.  To construct a slanted roof, the center point (1¾", 5cm) and draw a line upward a few inches. Close the roof by dropping two lines from the center point to each side of the house.

3. Alternatively, trace a miniature wooden birdhouse purchased from the craft or discount store. Simply place the house on your paper, back down and draw around it in pencil.

4. Repeat drawing houses until you have four in a row. Allow a slight space between them. Arrange them according to your taste, varying sizes and shapes.

5. Add details to each house such as entry holes for the birds, a picket fence, shingles, siding, or anything you wish. Go to the internet to look for ideas.

6. Embellish the houses with vines, flowers, leafs, beds, berries, tree branches, etc. Use the vines as a device to intertwine and connect the houses and it will lead the viewer's eye through the composition.

7. Put a bird or two in the picture. Draw one from your imagination or go online for pictures of birds. Put them standing still or in motion, flying into the picture.

8. Prepare your watercolors by adding water to each pad if you are using pan paints. If you are using tube paints, set up your palette with primary, secondary and neutral colors. Remember to leave the center part of the palette open for mixing colors.

9. Set out brushes, a ½" (1cm) flat for big areas, and some pointed ones in various sizes.

10. Begin painting by pulling a color for the body of the house, diluting it with clear water and making a puddle large enough to cover the area you wish to fill.

Repeat the process with a different color for each house.

Paint the houses, the area beneath the houses, and the sky.

Allow the paper to dry before attempting to paint over it or the colors will run into one another. Use a hairdryer to hasten the process, if desired.

11. When dry, paint the greenery, flowers, birds, sun and any other touches you can think of.



How to Make a Tweeting Bird in a Cage from Plastic Straws. Tips.Try a technique called negative painting for a white object, such as a picket fence or a daisy. You simply paint around the object, keeping the white paper as your white color. Use a small, pointed brush and dip from the puddle on your palette that is the color the flower or fence is standing against.

Dry the paint before attempting to add a new layer.

If tiny hairs get in the paint from the brush, allow the area to dry and brush the hairs away. If you try to pick them off with your fingers, you will mar your wash and leave finger marks.

Februari 08, 2020

how to painting your flower pot

How to Painting Your Flower Pot.

Flowers are colorful and inviting, but sometimes the planters they're in can be a bit drab. If you want to spice up your home or garden, decorate your flower pots with paint, decoupage, or intricate mosaics. A chic planter can totally tie together your decor and show your personality!





1. Clean your flower pot. No matter what material your flower pot is made from, make sure the areas you want to paint are clean. Use soap and water if there is any lingering dirt or dust. A spotless surface will help your painting last.

Remove any stickers or price tags.

If you’re painting a terracotta pot, soak it in water for a few hours first. Scrub the entire thing with a stiff brush to get rid of dust or dirt. Wait 24 hours before painting, as terracotta is porous and will stay wet for a long time.

Allow your flower pot to dry completely before painting.



2. Choose acrylic paints in the colors of your choice. The color possibilities are pretty much endless, but make sure you use acrylic paints. Acrylic dries extremely quickly and is water-resistant when dry. It works on terracotta, clay, plastic, and ceramic.

Use spray paint or liquid paint, as long as it's acrylic. Spray paint is a faster option, but liquid will allow you to use brushes and get a detailed design.

If your planter will be staying outside, you can use an outdoor paint meant for withstanding weather.



3. Plan out your design. Take a look at your pot and decide what look you're going for. If your planter is going to be inside, think about what might look good with the color of your walls or floor. If it's going to be outside, think about what colors might pop in your yard or garden.

Use tape to segment off sections if you only want to paint certain parts.

Add words to label herb plants to offer little motivational phrases.

A pure white flower pot is a sleek, modern option.

Use stencils to creative intricate shapes.



4. Paint the first coat. There are no limits to what you can paint onto your flower pots, so let your creative juices flow! Use a large foam brush to put down a base coat. Choose a single color so you have a simple canvas to decorate further.

Put down newspaper or towels and wear clothes you don’t mind getting dirty.

If you want to leave half of your pot unpainted, tape off that section.



5. Let your flower pot dry. A dry base coat will make sure the next application won't smudge or run. Be patient!

If you want a solid, single-color flower pot, it might be done already!



6. Apply a second layer of paint. Use foam brushes of all sizes to complete the look. Reapply the base coat if you want a more vivid color, otherwise go ahead and create your piece of art. Use whatever stencils, brushes, sponges, or freehand techniques you want.



7. Apply a clear sealer once your design is dry. When you’re happy with your new piece of art, it’s time to make sure everything stays in place. To prevent fading or chipping, apply at least two layers of clear, water based acrylic sealer. Get an acrylic sealer from your local craft store.

It may take a few days for the paint to dry if you used several coats of paint.

Using spray sealer is recommended, but you can also get cans of varnish and paint in on. This might leave brushstrokes behind.

Choose a matte or shiny finish depending on what you like.

Once protected, a painted design can last for years!



Tips.

If you’re using a terracotta planter, you may want to coat the inside with a sealer to keep moisture from seeping through and damaging your decorations.

If you don’t like how your paint job turned out, just paint over it!

Make sure everything is dry before you fill your flowerpot with dirt and a plant.



Warnings.

Wear gloves and safety glasses when shattering tiling or glass.

Protect your floor or tabletop from paint and glue with newspapers.





Things You'll Need.

Painting Your Flower Pot.

Clean flower pot.

Acrylic paints of assorted colors, spray or liquid.

Foam brushes of varying sizes.

Stencils.

Newspaper or towels.

Clear spray acrylic varnish, spray or liquid.

November 22, 2019

how to make colored salt

How to Make Colored Salt.

Colored salt is used for art and craft, for decoration, for teaching skills with writing or drawing, and for making rangoli for Diwali. It's easy to make, and depending on the exact items in your craft or kitchen cupboard, you might even be able to make it without buying a thing.







Coloring Salt with Paint.



Fill a container with salt. A jug or pitcher, a deep bowl, a plastic food container, etc. will all suffice.



Squeeze a little tempera paint into the salt.



Mix with a spoon or other item. Stir until the paint is evenly distributed through the salt.



Let stand overnight to dry.

Make as many more colors as you need for your project. That way, they'll all be ready at the same time.



Test before using. Check that the salt has dried before using in your craft, rangoli, teaching, etc. projects.









Coloring Salt with Liquid Food Coloring.



Use liquid food coloring for this method. Choose a color or colors that you wish to work with.



Tip the salt into a resealable bag.



Add the liquid food coloring to the salt. It's recommended that you do this gradually, a drop at a time, so that you can intensify the color as needed and stop when you're happy with it. The more drops added, the more intense the color.



Carefully press the air from the resealable bag without losing the salt. Seal. Wait for around a minute before proceeding, to give the salt time to settle.

Image titled Make Colored Salt Step 10

5

Press down on the bag again and again. This will move the coloring around all of the salt. Knead until you can see that the color has permeated all of the salt in the plastic bag.



Done. The salt is now ready for use. If you see any salt that is damp, let it dry before use, by allowing air into the bag and waiting a few hours more.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Gel Food Coloring.



For this method, use gel-based food coloring. You should find it dries instantly and won't leave any liquid, which may be the case with liquid food coloring.



Tip the salt into a resealable bag.



Add the gel food coloring. Transfer the gel using an implement such as a wooden or metallic skewer tip, the end of a butter knife or a toothpick. Only use a small amount at a time, adding a little more if you're not yet satisfied with the color. Gel coloring is fairly vibrant with just a little amount, so you don't want to overdo it.



Carefully press down on the bag to remove excess air. Seal tightly.



Shake or knead the color throughout the bag. Ensure that all of the salt is evenly colored.



Done. Given that this is gel, the colored salt should be ready to use immediately.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Chalk.



Choose a chalk color that you wish to use. Chalks come in a range of pastel and bright colors, depending on where you buy them from. Check art, craft or upmarket toy stores for a wider variety than you might find in traditional stationery or dollar stores.



Cover the workspace with a large sheet of paper.



Pour the salt onto the paper. The amount of salt depends on the amount you need.



Place the piece of chalk on its side, on the salt. Roll the chalk back and forth over the salt on the paper. As you do this, the color from the chalk will color the salt. Keep rolling until you're happy with the color.



Using the paper as a funnel, pour the chalk-colored salt into a resealable bag or a storage container.



Done. The colored salt is now ready to use, or you can store it until needed.

Repeat the process for as many colors as desired.



Tips.

A rolling pin can be used to distribute the color for the resealable bag color-distributing methods; ensure that there is no air in the bag and roll it up and down until the salt is evenly colored.

Keep colored salt in an airtight container when not in use. Make sure that the lid is on firmly, to prevent spilling it.

For a bath treat, add some essential oil drops as well as the colorant.

If making a lot of colored salt in varied colors, use clean food containers to free up the usual kitchen containers for your cooking and eating.



Warnings.

While these crafts are non-toxic, they are very messy. As such, they are best either supervised carefully or done by older children and adults.



Things You'll Need.

Salt (sea salt, rock salt, table salt, Epsom salts, etc. are all fine to use).

Container for holding salt or a resealable bag.

Colorant.

Stirring implement (such as a spoon, a skewer, a chopstick, etc.).

Storage container (if relevant).

November 17, 2019

how to keep glitter from falling off

How to Keep Glitter from Falling Off.

If you’re a glitter lover, chances are you’ve run across crafts and body glitters that are susceptible to flaking off and leaving a glitzy, sparkly trail behind you. Luckily, there are a few different ways you can craft with and wear glitter so that it doesn’t fall off so easily. Try using Mod Podge to seal in the glitter in your crafting projects, or mix cosmetic-grade glitter with different beauty products to create your own body glitter.







Using Mod Podge for Crafts.



Add a layer of satin or gloss Mod Podge to your craft. Use a foam brush or paintbrush, depending on your craft, and lightly brush a thorough layer of Mod Podge onto the surface area of whatever you are looking to cover in glitter. Make sure the entire area is coated and that there are no bare spots.

You can even make your own Mod Podge at home to save money!

If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time.

Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.



Dust, pour, or poof the glitter over the Mod Podged area. Depending on the kind of glitter you are using, you might apply it in a slightly different way. The main thing to remember is that you want to completely coat the Mod Podge in glitter and not leave any empty spaces.

You can also use a foam brush to spread on your glitter if you want a little more control over how much you use.

If you are looking for a high-glitter outcome, you can apply a second layer of Mod Podge and glitter immediately after the first one without waiting for it to dry first (it will take a little longer to dry after the second coat, then, but it will be highly glitterized).



Allow the glitter and Mod Podge to dry for 1-2 hours. Leave your newly glittered item alone for several hours or until it is dry to the touch. Try to leave it in a position so that the Mod Podge and glitter isn’t touching any other surface.

If you are adding glitter to multiple items, this is a great time to continue working on those projects while you’re waiting for others to dry.



Apply a top layer of Mod Podge to seal in the glitter. Once the first layer is dry to the touch, use your sponge or paint brush to add another thin layer of Mod Podge to your item. Use long, even strokes to reduce the appearance of brush lines. Make sure you cover the entire item and don’t leave any raw glitter poking through.

You could also use watered down school glue to create an opaque sealant for your crafting project.

The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.





Let your finished craft dry for 3-4 hours before you use it. Depending on how thickly you applied the Mod Podge, you may need to wait anywhere from 3-12 hours before you can safely use the item without potentially messing up the application. Always check the directions on the bottle for tips and guidelines.

If you have a dehumidifier, you can set your craft in front of it for a speedier drying time.

Never place your item directly in front of a heat source, like an electric heater or a hair dryer, as this may cause the Mod Podge to melt or change consistency so it doesn’t dry correctly.



Coat flaking items with sparkle Mod Podge to seal in the glitter. If you have an item that has glitter that is flaking off, you can apply pre-glitterized Mod Podge to add back some sparkle and lock in the remaining glitter. Simply use a sponge or paint brush to apply a thin, even coat of the sealant to the item, then let it fully dry before you use it again.

Make sure to work on a protected surface, like a counter covered in newspaper or paper towels.



Mix Mod Podge with your glitter of choice for a stronger glitter look. Pour some Mod Podge into a disposable cup or bowl and mix in as much glitter as you want to make your own glitter sealant. You can make the glitter as weak or as strong as you prefer. Then follow the instructions to apply the Mod Podge and let it dry.

You can also apply your glitter Mod Podge, another layer of glitter, and then top it off with the glitter Mod Podge again for even more glitter fun.









Wearing Body Glitter.



Combine body oil and loose glitter for an all-body glitter-wearing option. Instead of sprinkling loose body glitter on your arms and hoping it doesn’t fall off, combine body oil and loose glitter in a travel-sized shampoo container. Shake the container up really well, and then apply it to your arms, legs, chest, or face whenever you need an extra glitter boost.

While you could purchase body oils or lotions that already have glitter in them, it can be less expensive and more fun to do it yourself.



Put petroleum jelly on your skin and add body glitter for a sparkly look. Use a clean makeup or paint brush and apply an even layer of the petroleum jelly to the area you want to cover in glitter (like your collar bones, shoulders, or even your hairline). Then use another clean brush or your hand to gently press loose body glitter onto the jelly.

Visit a cosmetics store to buy body-specific glitter, which is usually a slightly different consistency than the glitter used for crafting.

If you don’t have petroleum jelly, you could also use hair gel as the sticky base for your body glitter.

Use this method in areas that aren’t going to come into frequent contact with other surfaces. For example, it probably wouldn’t work well on your legs if you are going to be sitting and standing and walking around often.



Mix hairspray and glitter to create glitter brow and hair gel. Spray hairspray into a dish, like a small cup or bowl (or even a disposable Dixie Cup), and add loose glitter. Mix it around with a toothpick or a spoolie brush, and then apply it carefully to your eyebrows or to select strands of your hair.

Do not use the glitter and hairspray mix on your eyelashes as it could irritate or infect them.



Wear vibrant lipstick and then add loose glitter for a shimmery lip look. Steer clear of sticky or glossy lipsticks and stick with a cream base to keep the glitter in place better. Put on a layer or two or lipstick, then use your fingers to gently press loose glitter into your lips.

With this trend, you’ll want to avoid pressing your lips together or eating or drinking anything too messy.



Create a glitter stamp from a makeup sponge and loose glitter. Cut a makeup sponge into a fun shape (like a heart or a star) and dip one side of it carefully into loose glitter. Spread a thin layer of petroleum jelly or hair gel on your body where you want the stamp, and then press the makeup sponge onto the jelly to transfer the glitter.

Your glitter stamp should stay on all day as long as it doesn’t brush up roughly against anything else.







Keeping Glitter on Clothes.



Use hairspray for a quick fix on your glitter clothing. Take your item of clothing outdoors or to a well ventilated area, and lay it down completely flat. Then spray a light coat of hairspray overtop of the glitter. Use unscented hairspray if you can. Allow the hairspray to dry completely before you wear the clothing item.

Hairspray is a great, quick fix, but overtime it doesn’t hold up, though you can reapply hairspray when you need to. Long-term, you just have to care for and store glittery clothes very carefully.



Affix glitter to your clothes with fabric glue. Lay out your item of clothing in a clean workspace, and apply the fabric glue in whatever patten you want. Then, carefully shake loose glitter overtop of the glue, coating it so that none of the glue is visible. Let the glue and glitter dry for several hours before picking up the item and shaking off the excess glitter.

You could even make a stamp out of a sponge and decorate your shirt that way (like stars all over a t-shirt), and then shake the glitter on top of the design.



Wash glittery clothes sparingly and let them air-dry. When you go to clean your clothes that have glitter on them, try to wash then only when they really need it. Use cold water and the delicate cycle in the washing machine, and don’t put them into the dryer. Instead, hang them up to air-dry.

You could even take your glittery clothes to a dry cleaner instead of washing them yourself.



When crafting with glitter, try working over a cooking tray. You’ll catch all the excess glitter that falls off and can easily return it to its container.

When making your own body glitter, try to use cosmetic grade glitter rather than crafting glitter.

Store your glittery clothes in plastic bags to protect them from rubbing up against other items in your closet (and to protect your other clothes from getting glitter all over them).





Things You’ll Need.

Crafting with Glitter and Mod Podge.

Mod Podge (satin, gloss, or glitter).

Foam brush or paintbrush.

Disposable cup or bowl.

Craft glitter.

Wearing Body Glitter.

Makeup or paint brush.

Petroleum jelly.

Hairspray.

Lipstick.

Makeup sponge.

Body oil.

Cup or bowl.

Cosmetic grade body glitter.

Keeping Glitter on Clothes.

Hairspray.

Fabric glue.

Plastic baggies.

November 08, 2019

how to make a ball

How to Make a Ball.

Balls provide endless entertainment for kids and adults alike, so make your own if you want a fun toy to play with this weekend. But there are balls for other occasions, too. If you’re having a rough week, for instance, create a stress ball to squeeze when you just want to scream. Or get creative and make balls out of things like rubber bands, fabric, and even cheese!

Method 1 Making a Bouncy Ball.

1. Combine school glue, cornstarch, and any add-ins in a bowl. Stir together the 1 tablespoon (15 ml) of school glue and 1 tablespoon (15 ml) of cornstarch until they’re thoroughly combined, using a spoon or wooden stick. If you want to add any extras, like food coloring or glitter, do so now.

You can use either white or clear school glue. If you use white glue and don’t add any coloring, your ball will be white.

Fun Add-Ins for Your Bouncy Ball

Sprinkle in glitter for a little extra sparkle.

Squeeze in a few drops of food coloring to make a ball in your favorite hue.

Stir glow in the dark paint into the glue for a ball that can be used at night.

Swirl 2 colors of food coloring together if you want a multi-colored masterpiece.

2. Stir warm water and Borax together in a separate bowl. Mix 2 tablespoons (30 ml) of warm water and 1⁄2 teaspoon (2.5 ml) of Borax until the Borax is completely dissolved. Stir vigorously to ensure there are no clumps of powder left in the bowl.

Heat the water in the microwave or on the stove until it’s warm to the touch. It shouldn’t be boiling.

You can find Borax in the laundry aisle of a store.

Borax is safe to use, but it's poisonous if ingested in large quantities. If you or your child get it in your eyes or mouth, contact poison control immediately.

3. Add 1⁄2 teaspoon (2.5 ml) of the Borax mixture in the bowl with the glue. Do not stir the ingredients together when you add them. Simply pour the Borax and water into the other bowl containing the glue and cornstarch.

Set aside the remaining Borax mixture if you plan on making more balls.

4. Let the mixture sit for 15 seconds. This allows time for the Borax to react with the glue, making the polymers of the glue link together which will create the ball shape. If you start stirring right away, the bouncy ball may not form or harden properly.

Set a kitchen timer or use the clock app on your phone to keep track of the time.

5. Use a spoon to combine the ingredients until they’re too thick to stir. Within 1 to 2 minutes, the mixture will thicken. Stir vigorously while the mixture is still liquid to make sure the ingredients are blended well.

Choose a sturdy spoon, like a metal or thick plastic one. Something flimsy, like a plastic spoon, will likely break off in the goo.

If you’ve made homemade slime with Borax, this process is very similar.

6. Remove the mixture and roll it between your hands to form a ball. Once the mixture is too thick for your spoon or stick, pull it out of the bowl and place it between your palms. Roll it around by moving your hands in circular motions until the ball is no longer sticky.

The more you handle the ball, the more firm it will become.

If you’re having trouble getting rid of the stickiness, dip the ball in the Borax water, then roll it a little more. This should remove any tacky texture.

7. Let the ball harden for about 10 to 20 minutes before you use it. This dries the ball a little more, so that it’s extra bouncy. If the ball starts to flatten while it sits, simply roll it back into shape when you’re ready to play with it.

Once you’re done playing, store the ball in an airtight container to prevent it from drying out. Keep it in a cool, dark place, like the pantry.

If stored properly, your ball could last for up to 6 months. It won’t go bad, but it will dry out eventually.

To make more bouncy balls, mix up another batch of glue and cornstarch and use some of the leftover Borax and water mixture.

Things You'll Need.

2 tablespoons (30 ml) of warm water, 1⁄2 teaspoon (2.5 ml) of Borax, 1 tablespoon (15 ml) of school glue, 1 tablespoon (15 ml) of cornstarch.

Spoon or wooden stick, 2 cups or small bowls, Food coloring or other add-ins (optional), Airtight container (optional).

Method 2 Creating a Paper Soccer Ball.

1. Trace 20 hexagons on white paper, then cut them out. Draw your hexagons on the paper with a template, making each side the exact same length. Use scissors to carefully cut along the traced shapes, then set them aside.

If you want a life-sized soccer ball, make the edges 2 inches (5.1 cm) long.

To make a template, use a ruler to draw the hexagon shape on a piece of cardboard. Cut it out and trace around it with a pencil to make each paper hexagon.

Cardstock is the best type of paper to use for this craft. It’s sturdy enough to hold the shape of the ball yet still easy to fold.

2. Trace and cut out 12 black pentagons with sides the same length. The edges of the black and white pieces need to be equal so that they fit together properly. Use a template to draw your pentagon shapes, then cut them out with scissors.

For example, if you’re creating a life-sized ball, make your pentagon sides 2 inches (5.1 cm) long.

You can use a different color paper instead of black, or get creative and make a multi-colored ball with a variety of shades.

Cut a pentagon template out of cardboard to trace on the black paper so that the pieces are all equal size.

3. Fold up a thin border around each hexagon and pentagon. This edge will allow you to build your ball seamlessly, so there are no gaps between pieces. You only want to fold enough of each edge to have a place to apply glue or tape. Keep the border size equal on each piece so they all remain the same size after folding.

To fold the same border on each piece, trace the border before you fold, using a ruler to ensure each edge is an equal width.

Use a straight edge, like a ruler, to help you fold the edges in a perfect line.

If the edges are crooked, re-fold them. They have to be straight for your ball to be the right shape.

To make folding easier, snip off the corners of your border before you fold. This allows you to fold the edges up without dealing with corners that crumple up or stick out.

4. Apply glue or tape to the folded edges of each piece. This is how you’ll stick the the pieces together to form the ball. Swipe glue on each of the edges of all the hexagons and pentagons. You can also use a strip of tape on the edges instead.

A glue stick will work better than liquid glue to prevent the paper edges from getting soggy.

If you are slow at putting the ball together, you may want to apply the glue as you go, rather than all at once. Otherwise, it will dry out on the final pieces by the time you get to them.

5. Attach 5 white hexagons to 1 black pentagon. On a standard soccer ball, each black piece is completely surrounded by white pieces. Press 1 white hexagon onto each edge of a black pentagon. Hold the edges together until the glue dries.

If you’re using a glue stick, the glue will dry almost instantly. Wait about 5 to 10 seconds while pressing the edges against one another.

6. Continue gluing the pieces together in this pattern, forming the soccer ball. On the other edges of the white hexagons that you attached to the original pentagon, glue more black pentagons. Don’t forget to glue the white edges that touch each other, too. Once you connect all of the pieces, you’ll have a ball shape.

A black piece should never touch another black piece. However, white edges will touch other white edges.

If you’re having trouble visualizing the pattern, look up an image of a soccer ball online as a guide.

You can stuff the ball with shreds of paper if you want to create a fuller shape.

Things You'll Need.

Black and white sheets of paper, Scissors, Cardboard.

Pencil or pen, Glue stick or tape, Homemade Stress Ball, 12 in (30 cm) latex balloon.

Method 3 Using Play Dough for a Homemade Stress Ball.

1. Use your hands to roll play dough into a long shape. Place a pile of play dough on a flat surface, then gently roll it out with the palms of your hands. This should form what looks like a snake.

It doesn’t matter what color play dough you use, since it will just be going inside the balloon.

Buy pre-made play dough or make your own at home.

If you buy play dough, use one 5 oz (140 g) container per balloon.

2. Insert the play dough into the balloon. Stretch the neck of the balloon open as wide as you can, then stuff the play dough snake into the balloon. The play dough should fill the balloon just to the base of the neck.

If there is a lot of empty space in the balloon, add more play dough.

Stretch out the neck of the balloon before you insert the play dough to loosen it up.

This step is easier if you have someone else hold the balloon open while you put the play dough inside.

3. Tie a knot in the neck at the top of the balloon to secure it. This will keep all of the play dough inside the balloon. Wrap the neck around your finger to make your knot, tying it as tightly as possible.

If you want extra protection, you can place your original balloon inside another empty balloon before tying it shut. This adds a double layer in case you poke a hole.

You can decorate your stress balls with permanent markers if you’d like. For example, you could draw a funny face or write a calming phrase, like “just breathe.”

Things You'll Need.

Permanent marker (optional).

Method 4 Forming Other Types of Balls.

1. Build a rubber band ball for a creative way to store supplies. Instead of tossing your rubber bands in a drawer, keep them together in 1 big ball. Fold up a thick rubber band to form the center, then begin wrapping all of other bands around it. Criss-cross directions often to round out the ball.

You can also wrap your bands around a bouncy ball or crumpled-up piece of paper for a larger ball.

Start with smaller rubber bands, then add the larger ones as the ball gets bigger.

2. Sew a fabric ball if you want a soft toy for kids or pets. Young children, particularly babies, could get injured by hard rubber balls. Instead, stitch together a ball out of strips of fabric, then stuff it with polyfill for a plush feel or use dried beans for a bean bag texture.

This also makes a great pet toy for dogs to chew on or for cats to bat around. If the ball is for a pet, pick a durable fabric like vinyl or nylon and keep your pet in sight as it plays with the ball.

You can use a sewing machine to make your ball or sew it by hand.

Cotton is ideal for kids’ toys since it’s a long-lasting and soft fabric that’s easy to wash.

3. Use ice to make a ball for a unique cocktail add-in. Not only do ice spheres look much cooler than regular cubes floating in your drink, they also melt slower, so your beverage doesn't get watered-down as quickly. Fill a silicone ice ball mold with water, then place it in the freezer for at least 6 hours, or until the balls have set and hardened.

For extra flair and flavor, add things like fresh herbs or edible flowers into the water in the mold before it freezes.

You can buy ice ball molds from a kitchen store or online retailer.

4. Make a cheese ball if you’re having people over for dinner or a party. When it’s your turn to play host or hostess, whip up a cheese ball as an impressive appetizer. Mix together cream cheese and other soft cheeses, shape it into a ball, then chill it in the refrigerator. Roll it in chopped nuts and other garnishes before serving.

You can substitute mascarpone, neufchatel, or goat cheese for the cream cheese if you’d like.

Pair any type of softer cheese with the creamy base, depending on your taste preferences. As long as it’s not a dry, crumbly cheese like parmesan, it will work.

Serve a cheese ball with finger foods for dipping, like crackers, pretzels, or raw veggies.

Warnings.

Borax is poisonous. Get help immediately if you accidentally ingest it or get it in your eyes.

Never let young children handle Borax without close supervision.

Januari 20, 2020

how to make mickey mouse ears

How to Make Mickey Mouse Ears.

Mickey Mouse is the worldwide symbol of the Disney empire. He is beloved by children all over the world, so it’s no surprise kids want to wear Mickey Mouse ears while playing or out trick-or-treating on Halloween. You don't have to pay outrageous prices for mouse ears of your own. All you need are a few household supplies and soon you'll have a pair all to yourself.

Part 1 Making the Ears.

1. Gather the material for the ears. You will need black felt and cardboard to fashion your ears. However, if you don't have cardboard, you might be able to use construction paper that is both thick and stiff.

All materials needed for making Mickey Mouse ears can be purchased at a craft or fabric store.

If you don’t have any felt, you can paint or color the cardboard circles black or you can even paste some normal black craftsheet on the cardboard.

You could glue together several pieces of sturdy construction paper if you don’t have cardboard for the ears.

The material you use for the ears should be stiff enough so that the ears don’t flop over after affixed to the headband.

2. Purchase a suitable headband. The headband should be black and at least ½" (1.27 cm) thick. This will form the base for your mouse ears and attach them to your head. A thicker band might give greater stability to your mouse ears.

3. Create two identical circle templates out of paper. You will need to trace two circles, one for each ear. Each circle should be between 3” and 5” (7.6 cm and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of each circle. The circle template will look somewhat like a globe lamp. The bottom tab on the circle will serve to anchor the ears to your headband.

4. Trace your circle templates onto the felt. Hold the paper template with one hand while you trace four circles onto your black felt. You can trace your circles with a piece of chalk. Later, you can wipe the chalk off with a wet cloth.

5. Trace the circle template onto the cardboard. This cardboard is what will support the fabric of your mouse ears, keeping them looking perky. You will need two cardboard circles, one for the left ear and the other for the right.

You can also use the bottom of a bowl to create the circles you need for the ears.

6. Cut the felt circles. You'll want to use very sharp scissors or fabric scissors, otherwise you might not be able to cut smooth circles in your fabric. Follow your outlines with your scissors and a steady hand. You may need to clean up the edges once you have cut the circles free.

7. Cut the cardboard circles. In the same fashion as the felt circles, but still identical in shape to those circles, you'll need to cut out your cardboard circles. These will be used to reinforce the fabric and make it sturdy.

8. Glue the felt evenly to the cardboard. In most cases, household glue will be good enough to attach the felt to the front and back of each cardboard ear. This will give the ears the internal stability of cardboard, but the color and appearance of mouse ears.

Part 2 Attaching the Mouse Ears to the Headband.

1. Use a hot glue gun if you attach the mouse ears to a plastic headband. The higher quality glue used in a hot glue gun will create a better bond between the flap of the ear and the base of the band. Or, if the headband is made out of more flexible material, you can simply staple the mouse ears to the headband.

2. Fold and glue the tabs to tuck underneath the headband. The circles of your ears should be about 3” (7.62 cm) apart. Use your hot glue gun attach your tabs firmly to your headband. You can achieve the best placement for your ears by marking the position of each ear where you plan on attaching it to the headband.

You may need to fold the ears up and forward to encourage an upright position.

3. Allow sufficient time for glue to dry, if applicable. Staples won't require time to firm up, but if you've glued your mouse ears together, you should allow 30 minutes to an hour for the glue to set. You can improve the bond between your mouse ears and headband by holding the glued parts together while the glue sets for 5 to 10 minutes.

4. Dress up in a Mickey outfit and show off your ears. You might be able to get away with a costume comprised of Mickey's classic yellow shoes and red shorts. Or maybe you'll want to imitate one of Mickey's character roles, such as the robed assistant wizard in Disney's Fantasia.

Tips.

Consider substituting pieces of stiff foam for the cardboard. Glue two pieces of foam back to back and create a tab so you can attach the foam circles to the headband.

The Mickey Mouse ears sold at Disney theme parks are actually ears attached to a black beanie. You can make your ears with a beanie instead of a headband to make yours look more authentic.

A sturdy stapler can work in place of a glue gun, if you have no glue gun available.

Warnings.

Avoid using regular glue for joining headband and ears together. It will not likely be strong enough to hold the ears in place for a long duration or throughout heavy play.



Things You’ll Need.

Black felt, Black felt tip marker, black crayon, or paint (optional).

Cardboard, Chalk, Foam (optional), Hot glue gun (and glue), Headband.

Heavy duty stapler (optional), Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019

how to making a decorative pinwheel

How to Making a Decorative Pinwheel.

Pinwheels are a beautiful decoration and delight children of all ages. Use them to decorate your yard for a party, or happily watch your children as they admire the bright colors whirling together. Once you know how to make a basic pinwheel, you can make a fancier one with more spokes. You can also make a disc-shaped pinwheel. It won't spin, but it'll look lovely as a wall decoration or ornament.

1. Cut a sheet of patterned scrapbooking paper into four strips. Get some 12-inch (30.48-centimeter) square scrapbooking paper. Use a metal ruler and a craft blade to cut the paper into four, 3-inch (7.62-centimeter) wide strips.

Some scrapbooking paper has a white strip along the bottom edge for the price and label. You should trim this off first.

These pinwheels are meant to be used as decorations on gifts, walls, or ornaments. They do not spin like regular pinwheels.

2. Fan-fold the strips widthwise. Take your first strip, and fold the narrow edge over by ½ to 1-inch (1.27 to 2.54 centimeters). Use that as a fold as a guide for the rest of the paper. Repeat this step for the remaining three strips.

3. Consider adding a design to one of the long edges. Fold your strip back up so that it looks like a closed fan. Cut an angle into one of the narrow edges. Work one strip at a time, otherwise, the paper will be too thick to cut neatly.

You don't have to do this step. This will simply give the pinwheels a more ornate edge.

4. Attach the pieces together to make a longer strip. Place a strip of tape against one of the narrow ends of your first strip. Place it against the narrow end of the next strip, then press them together. Keep connecting the strips until you have one long strip.

If both ends of the strips are folded in opposite directions, they will make a V or ^ shape. Trim off one of the ends until both are folded in the same direction.

5. Attach the first and last strips together to make a disk. Run some glue or a strip of double-sided tape along one of the narrow ends. Bring the other narrow end towards it, and press the two together.

6. Flatten the disk. If the disk won't lay flat, you will need to glue a support to the back. Flip the disk over so that the back is facing you. Choose a dowel, straw, or skewer that is the same height as the disk. Hot glue your chosen stick down the center of the disk, right between two ridges.

7. How glue an embellishment to the front of the disk. For a fancy look, you can cut a small circle out of coordinating paper, then glue it to the front to cover the hole. For a more rustic touch, you can use a large button instead.

8. Cut a circle cut from cardstock to the back of the pinwheel. This will make it easier to secure the pinwheel to walls, gifts, and other items. It would be best if you use a matching color, but you can use a different color as well.

Use a cup, jar, or lid to trace the circle.

9. Use double-sided tape to secure the pinwheel. Place a few strips of double-sides tape onto the back of the pinwheel, right over the cardstock circle. Secure the pinwheel to your desired gift of banner.

If you are securing the pinwheel to a wall, consider using double-sided, foam mounting tape instead.

Alternatively, you can string several pinwheels together to make a banner.

10. Finished.


Tips.

Make your pinwheel out of thin plastic, such as acetate, binder dividers, or stencil plastic.

Wrap a pretty ribbon in a spiral around the dowel before adding the pinwheel.

For an even fancier pinwheel, paint the stick with acrylic paint or spray paint beforehand. Let it dry before adding the pinwheel.

You can use a drinking straw instead of a dowel. It won't be as durable, but it will be easier to assemble.

Glue a bead, button, or charm to the pin on the front of your pinwheel for a fancy touch.

Make your own double-sided scrapbooking paper by gluing two sheets of paper back-to-back.

Decorate plain paper with rubber stamps.

You can make a simpler pinwheel by securing everything with a thumbtack to the side of a pencil eraser.


Things You'll Need.

Colorful paper.

Pencil.

Ruler.

Scissors.

Double-sided tape.

Hot glue gun and hot glue sticks.

Stapler.

Cardboard scraps or buttons.

November 30, 2019