how to organize a craft room

How to Organize a Craft Room.

A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.

Method 1 Sorting Your Craft Supplies.

1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’

Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.

2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.

At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.

To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.

3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.

Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.

Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.

4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.

Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.

5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.

Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.

Method 2 Implementing a Storage System.

1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.

Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.

2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.

Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.

Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.

Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.

3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.

4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.

Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.

For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.

Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.

5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”

You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.

6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.

Method 3 Organizing Your Space for Creative Inspiration.

1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.

In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.

2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.

3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.

4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.

To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.

5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.

6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.

Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.

Tips.

You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.

Warnings.

Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.

November 25, 2019

easy kid craft

easy kid craft

One of the #1 things that people often say to me is, “I would love to make creative projects with my kids, but I’m just not crafty. I don’t even know where to start!” My reply is always, “Trust me, you do NOT need to consider yourself ‘crafty’ to start getting creative with your children!”  There are hundreds upon hundreds of craft projects that you can make with your children that require NO special skills or tools and that take less than half an hour of your time. In fact, most of these 50+ quick and easy kids craft project ideas that I’ve rounded up here actually take less than FIFTEEN minutes to make!



WHY CRAFT WITH YOUR KIDS?

A recent study by Dr. Richard Rende revealed that creative interaction between parents and young children engaging in activities like arts and crafts not only provides immediate and lasting cognitive benefits but also creates a unique bonding experience, which creates lifelong memories. Taking time to be creative with your children is a topic that I am incredibly passionate about. I know firsthand the benefits that children reap when they are exposed to arts and crafts activities, and in an age where arts are in a decline in the school systems, it is even more important than ever for parents to take the initiative to introduce art activities to their children.



Other key findings of Dr. Rende’s study showed that:



• Arts and crafts engage multiple brain areas simultaneously and

improve bilateral coordination between the left and right sides of

the brain, leading to immediate and future cognitive development.



• Activities like arts and crafts accelerate the development of muscles

in the hands and fingers, improving fine motor skills that are

essential for school success in the earliest formal years.



• Face-to-face interaction in the early years is critical for optimal

social development.



• Arts and crafts promote rich social interactions that help develop

language skills and social cognitive abilities like understanding

emotions.



• Creative activities are a great way to bond with children and create

lasting memories.



Nearly 90% of the parents surveyed for the study said that they would like to spend more time creating arts and crafts with their children, but they didn’t know where to start or how to carve out the time needed.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019

how to make pom pom sheep

How to Make Pom Pom Sheep.

Whether you're looking to make a cute Easter decoration or just a fun craft to do with your kids, a pom pom sheep fits the bill. It's easy to make your own pom pom with just some yarn and a piece of cardboard, so you can customize your sheep to look exactly the way you want. Add a simple head made of craft foam and googly eyes and pipe cleaner legs, and you have an adorable farm animal to decorate your home.

Part 1 Creating the Pom Pom.

1. Cut out a piece of cardboard. To make the pom pom for the sheep, you’ll need a cardboard rectangle to wrap your yarn around. For a large sheep, cut a piece that’s 3-inches by 5-inches (8-cm by 13-cm). For small sheep, cut a piece that’s 3-inches by 2-inches (8-cm by 5-cm).

You can adjust the size of the cardboard to customize the size of sheep if you prefer.

After you cut the cardboard, it’s a good idea to wrap it in packing tape. That will allow the yarn to slide off it more easily when you’re finished making the pom pom.

2. Wrap the yarn around the cardboard. For the pom pom, you need fluffy white, cream, brown, or black yarn. Instead of cutting the yarn to a certain length, remove an end from the ball or skein and begin wrapping it around the cardboard widthwise. For a large sheep, wrap the yarn around the cardboard 120 times. For a small sheep, wrap the yarn around the cardboard 75 to 80 times.

Use one hand to hold the end of the yarn in place as you wrap it side by side in a single layer on the cardboard. Once you’ve covered the cardboard, start creating a second layer over the first. Continue working until you’ve wrapped the yarn around the suggested number of times.

While white, cream, brown, or black yarn offers the most realistic sheep look, you can substitute your favorite color yarn, such as pink or blue.

3. Bend the cardboard to slide off the yarn. When you’ve completely wrapped the cardboard with the yarn, use your fingers to bend the cardboard slightly widthwise to contract it. That makes it easier to carefully slide the yarn from the card.

Be gentle as you pull the yarn from the cardboard and make sure to hold it together so it stays together.

4. Tie twine around the middle of the yarn bundle. Once you’ve freed the yarn from the cardboard, use a piece of twine to secure the bundle in the middle. Tie the yarn as tightly as you can to ensure that it stays together.

If you don’t have twine, you can substitute a piece of yarn. However, twine is stronger than yarn so it usually does a better job of holding the pom pom together.

5. Cut the loops of the yarn to form the pom pom. When the yarn is securely tied with the twine, use a pair of scissors to cut the loops. This will create the pom pom shape for your sheep.

After you cut the loops, you may need to trim some pieces to get the look that you want for your sheep.

Part 2 Making the Head and Legs.

1. Draw the shape of the sheep’s head on craft foam and cut it out. To make the sheep’s face, you’ll need a piece of black craft foam. Use a pencil or pen to draw the shape of the sheep’s head, complete with ears, on the foam as a guide. Next, carefully cut the head out with a pair of scissors.

If you’re not comfortable drawing the sheep’s head freehand, you can find templates online at various craft websites, such as Dad Can Do .

The proper size for sheep’s head will depend on how large your pom pom is. It should fit on one end of the pom pom.

If you used dark yarn for the pom pom, use white craft foam for the head.

You can use a craft knife to cut out the head if you prefer.

2. Stick googly eyes on the head. Once you’ve cut out the sheep’s head, select two googly eyes that will fit on it side by side. Apply your favorite type of craft glue to the back of the eyes, and press them onto the foam head.

You can find googly eyes in a variety of sizes at the craft store.

Make sure to let the glue dry for at least 5 minutes, so you can be sure the eyes won’t fall off when you begin to assemble the sheep.

3. Fold two black pipe cleaners in half. For the sheep’s legs, you’ll need two black pipe cleaners that are approximately 4- to 5-inches (10- to 13-cm) long. Bend the pipe cleaner in half to create a “V” shape.

Part 3 Assembling the Sheep.

1. Glue the head to the front of the sheep. Add a dab of glue to the back of the sheep’s head that you’ve made. Carefully press it onto your pom pom, and hold it for 30 to 60 seconds to ensure that it is secure.

You can use any type of glue to secure that works on fabric to secure the head to the pom pom. However, you may have an easier time if you use a hot glue gun.

2. Thread the pipe cleaner front legs through the pom pom. Take one of the bent black pipe cleaners and push it through the pom pom on one side near the front. Make sure that the pipe cleaner is threaded through the yarn pom pom so it is secure.

Some thread may come loose when you thread the pipe cleaner through. You can trim any errant strands.

3. Press the second pipe cleaner through the back of the pom pom. After you’ve secured the pipe cleaner for the front legs, push the second one through the pom pom near the back. Pull it through to the other side to create the second set of legs.

Take care with your placement of the second pipe cleaner. You want to ensure that it’s far enough back from the first to provide proper balance for the sheep to stand.

4. Adjust the pipe cleaners to allow the sheep to stand. Once both pipe cleaners are threaded through the pom pom, bend the four ends to create feet that help the sheep stand. You may need to adjust the length of the pipe cleaners on each side to ensure that the sheep is balanced properly.

Tips.

You can use the same technique to create a create a pom pom bunny and/or chick to serve as Easter decorations.

This is a kid-friendly activity, but be sure to supervise their use of scissors and the hot glue gun.

Things You’ll Need.

Cardboard.

A ball or skein of fluffy yarn in white, cream, black, or brown.

Scissors.

Twine.

Black craft foam.

Two googly eyes.

Two black pipe cleaners.

Desember 01, 2019

how to organize craft supplies

How to Organize Craft Supplies.

If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.







Steps.



1. Locate all of the craft supplies that you own.

If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.

Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.



2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.

Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.

Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.

Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.



3. Sort out all of the supplies that you have into smaller groups.

Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.

Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,



4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.

Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.

If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.

Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.



5. Keep on sorting.

Sort a little bit whenever you start or finish a project or get new supplies.

Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.



6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.

Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.

For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.



7. Repeat this process with different containers until everything is filed away.



8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.



9. Finished.





Tips.

Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.

Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.

Put things where they'll be handy when you need them, and where you think you'll look for them.

Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.

Most importantly, find your own balance between creativity and control.

Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.

Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.

Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.

Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.



Things You'll Need.

Craft supplies.

Multiple containers depending on the amount of supplies.

Paper to label the containers.

November 21, 2019

how to make bottle penguins

How to Make Bottle Penguins.

There are lots of ways to recycle plastic soda bottles, and turning them into adorable penguins is one of them. With a little bit of paint, time, and creativity, you can turn 2 plastic soda bottles into an adorable penguin. If you have a lot of plastic soda bottles then you can create an entire penguin family!

Part 1 Assembling the Base.

1. Find 2 plastic soda bottles. The large, 2-liter (67.2-oz) bottles will work the best for this, but you can use smaller soda bottles too. Look for the kind that have the 4 bumps on the bottom. These bumps will make the feet and the hat.

The color of the bottles does not matter. You will be painting it.

2. Remove the labels and wash the bottles. Peel the labels off first, then wash the bottles inside-out with soap and warm water. Be sure to remove all sticker residue. Dry the bottles with a towel.

Wipe the bottles down with rubbing alcohol as well. This will remove any oils that might keep the paint from sticking. Let the bottles dry; this should only take a few seconds.

3. Cut the bottles in half and recycle the top sections. A craft blade will work the best for this, but you can do it with a sharp pair of scissors too. Young children should be supervised during this step.

If the cut edge is jagged, cut it smoother with a pair of scissors.

For a smaller penguin, cut the bottom 2 to 3 inches (5.1 to 7.6 cm) off of the first bottle, and cut the second bottle in half. The shorter half will make the bottom.

4. Tuck 1 bottle inside the other to make a capsule. Turn the bottles so that the cut edges are facing one another. Slide the first bottle into the second bottle by about 1⁄2 to 1 inch (1.3 to 2.5 cm). If the bottles won't fit inside one another, cut a 1⁄2 to 1 in (1.3 to 2.5 cm) slit into 1 of the bottles first; place this edge on the inside.

Make sure that the 4 bumps on the top and bottom of the capsule line up.

5. Glue the bottles together, if desired. If the bottles are loose, glue them together with tacky glue or super glue. Pull the bottles apart, and paint the inside rim of 1 bottle with glue. Slide it over the other bottle.

Hot glue is not recommended because it is too bulky.

Alternatively, you can keep the bottles loose, and use the penguin as a gift box.

Part 2 Painting the Penguin.

1. Paint the entire capsule black, then let it dry. Take the capsule outside or into a well-ventilated area. Set it down on a sheet of newspaper, then coat it with black spray paint. Let the paint dry for 15 to 20 minutes, then turn the capsule over. Spray paint the bottom and let it dry completely.

Hold the can 8 to 10 inches (20 to 25 cm) from the capsule, and spray using a side-to-side motion.

If the paint is too thin, let it dry completely, then apply another coat of paint.

If you don't have spray paint, paint the capsule using black acrylic craft paint and a paintbrush.

2. Paint the penguin's face and belly white, then allow them to dry. Use a pointed paintbrush and white acrylic craft paint to outline the white face and belly of the penguin. Fill your outline in using a flat paintbrush. Let the paint dry, then add another layer if the first layer is too thin. Let the second layer dry too, if you added it.

Look at pictures of real or cartoon penguins to get ideas for the placement of the white parts.

Make sure that 2 of the bumps on the base of the capsule line up with the bottom of the penguin's belly. These are its feet!

If you are making a smaller penguin, use the shorter half to make the bottom.

3. Give the penguin a widow's peak, if desired. Use a pointed brush and black acrylic craft paint to draw a V-shape at the top of the penguin's white face. Fill the V-shape in with black paint so that it blends in with the body. For an even nicer finish, made the sides of the V-shape curved so that it looks like Mickey Mouse's widow's peak. Let the paint dry before moving on.

4. Paint 2 eyes and a beak using acrylic craft paint. Use a yellow upside-down triangle for the beak, and 2 black dots for the eyes. For a more realistic beak, paint a yellow or orange circle, then draw a horizontal black line going through the middle.

Look at pictures of cartoon penguins to get ideas.

You can also hot glue 2 buttons or 2 googly eyes for the eyes.

If you don't have yellow paint, cut a triangle out of yellow paper, and glue that on instead.

Part 3 Adding Optional Details.

1. Give your penguin character with lashes, eyebrows, and/or blush. You don't have to do any of these, but they can really give your penguin personality. Use a very thin brush for the lashes and/or eyebrows, or a paint pen. Use a larger pointed brush to apply pink paint for the blush.

If you want to give your penguin visible yellow feet, paint the 2 bumps in the front (under the white bellow) with yellow acrylic craft paint.

2. Paint the top half of the bottle to turn it into a hat. The 4 bumps on top of your penguin's head can easily turn into a hat. Paint a line around the penguin's head, just above the eyes, then fill in everything above that line. Use whatever color you want.

If you have a molded line just below the bumps, you can use that as a guide instead.

3. Let the hat dry, then add some details. You can make the hat look more hat-like by painting or drawing some stripes or spots onto it. Use a thin, pointed paintbrush and acrylic craft paint in a contrasting color to do this. Let the paint dry when you are done.

Use a paint pen for thin stripes or small dots.

4. Glue a pompom to the top of the hat, if desired. You can make the pompom yourself out of yarn, or you can buy it from the kids section of a craft store. Hot glue the pompom to the top of the hat, right between all 4 bumps.

Choose a pompom color that matches the designs on your hat. If you did not add designs, then use a contrasting color instead.

5. Tie ribbon around the neck to make a scarf. Find some ribbon that goes well with the hat. Wrap the ribbon around the penguin's neck, then cross the left end over the right end. Bring the left end up through the gap, then tighten it. This is just like starting to tie a pair of shoes!

Glue both ends of the ribbon to the penguin so that they stay down.

If you are turning this into a gift box, make sure that you keep the ribbon below the seam.

You can also cut a long, skinny strip out of felt, and use that instead of ribbon. Cut fringes into each end for additional charm.

Question : How do we make the eyes?
Answer : Cut out two small black circles, and two slightly larger yellow circles. Glue the black circles onto the yellow circles, and glue those onto the white face.

Question : We don't have to remove the bottle cap?
Answer : If you have removed the cap, you will have to tape or otherwise plug the hole on the top to "sculpt" the rounded top of the head on, so it is not recommended to remove the cap. However, taping or a cork replacement can be used.

Question : Can I use a plastic bottle?
Answer : Yes, but it may be hard to paint.

Tips.

If you want your penguin to have a pointy hat, discard 1 of the bottom halves and keep 1 of the top halves. Use the top half as the hat.

Use paintbrushes made from sable or taklon bristles. Do not use boar bristle, horsehair, or camelhair.

Spray the penguin with varnish or sealer, if desired. Do this after you finish painting, but before you add pompoms and scarves.

You can spray the capsule with paint primer first to help the paint stick better.

If you are worried about the paint chipping, spray the capsule with paint primer before you start painting.

Warnings.

Use low-temp hot glue guns to avoid blisters and burns. Do not use high-temp hot glue guns.

Things You'll Need.

2 plastic soda bottles, Craft blade, Black spray paint, Acrylic craft paint (white, yellow, and black).

Acrylic craft paint, 2 contrasting colors, Flat and pointed paintbrushes, Ribbon or felt, Pompom, Hot glue, Tacky glue or super glue.

Januari 23, 2020

how to make a polymer clay penguin

How to Make a Polymer Clay Penguin.

There's no denying that penguins are among the cutest critters to populate this planet. Unfortunately, having a real one might be out of the question for most people. Luckily, it is possible to make a miniature penguin out of polymer clay. You can even insert a small eyehook or eye pin to turn it into a charm so that you can take it wherever you go!

Method 1 Making a Basic Penguin.

1. Make the body of the penguin. Knead some black clay until it turns soft. Roll it into an oval, about twice the height of your thumbnail. Flatten one of the oval's pointy ends against your work surface until it can stand on its own.

2. Make the head of the penguin. Roll some black clay into a small ball, about the same size as your thumbnail, or half the height of the body.

3. Attach the head to the body. Gently press the head on top of the penguin's body. Don't worry if the head squishes a little. If you'd like, you can use a clay sculpting tool to smooth the seam between the head and the body.

4. Roll some white clay out into a thin sheet. Clean your hands first, then knead some white clay until it turns soft. Roll the clay into a thin sheet using an acrylic rolling pin or tube. You can find acrylic rolling pins in the polymer clay aisle of an arts and crafts store.

If you can't find any acrylic rolling pins, you can use a regular rolling pin, a fat marker, or any other smooth cylinder.

5. Cut an oval and a heart out of the white clay. The oval will make the belly and the heart will make the face. Both need to be a little smaller than the body and head respectively. You can use mini polymer clay cutters for this; they look like miniature cookie cutters. You can also cut the shapes freehand with a craft blade instead.

6. Stick the white shapes onto the body and head. Gently press the white heart onto the head, and the white oval onto the body. Make sure that the bottom of the heart and the top of the oval go into the crease between the head and body.

7. Roll some black clay into a thick sheet. Clean your hands again, and knead some more black clay until it turns soft. Roll the clay into a thick, black sheet. Plan on making it twice as thick as the white sheet. This will eventually make the wings.

8. Cut two wings out of the sheet. Start by cutting an oval out of the clay, a little bit shorter than the body. Cut the oval in half, lengthwise, so that you end up with two semi-ovals. You can use a craft blade to do this.

9. Add the wings onto the penguin's body. Gently press the wings down onto the body to either side of the white belly. The flat edges of the wings should be facing the white belly. The tips of the wings should be nestled into the crease between the head and the body.

Don't worry if the wings overlap the white belly a little.

Consider flipping the bottom of the wings outwards for a cute touch.

10. Make a beak. Clean your hands, and knead some orange clay. Roll the clay into a tiny teardrop or cone.

11. Attach the beak. Press the bottom of the teardrop/cone into the middle of the penguin's face.[4] Use a craft blade to cut the beak open after you attach it, if desired. This will give your penguin an open mouth instead of a closed one.

12. Make the feet. Roll a small ball out of orange clay. Cut the ball in half using a craft blade. Cut two notches into each dome to make the feet.

13. Attach the feet. Turn the penguin upside down. Pinch the back of both feet, then press them into the base of the body. Make sure that the front of the feet (the notched parts) stick out from under the body. Place the penguin right-side-up against the table, and adjust the feet, if needed.

14. Consider inserting an eyehook. If you wish to turn this penguin into a charm, press a jewelry eyehook through the top of the head and into the body. If the hook is very long, trim it down first using a pair of wire cutters.

15. Bake the penguin according to the manufacturer's baking times and temperatures. Turn on your oven, and let it reach the recommended temperature, usually between 215 to 325°F (102 to 163°C). Place the penguin on a foil-lined baking sheet, and bake it for the recommended time, typically 15 to 20 minutes.

Each company will be a little different, so you will need to read the label on the clay's wrapper.

If your penguin has a lot of fingerprints on it, gently brush it with a soft-bristled paintbrush before you bake it.

16. Allow the penguin to cool before adding the eyes. Use a black permanent marker to draw two dots on the penguin's face, right above the beak. Position them in the loops of the "heart". You can also use a thin brush and acrylic paint.

17. Glaze the penguin, if desired. If you wish to make the penguin shiny, get some glaze meant for polymer clay. Paint the penguin with the glaze, then let the glaze dry.[9] Refer to the label on the bottle, as each brand's drying times will vary.

Method 2 Making a Penguin Charm.

1. Shape the body. Knead some polymer clay until it softens, then roll it into an oval. Flatten the oval with a glass so that you get a disk shape. Cut off one of the pointy ends of the oval, so that the penguin can stand upright.

Penguins are typically black, but since you are making a cute penguin, you can make him or her any color you want! Pink, baby blue, or light purple would be especially cute!

2. Roll some white clay into a thin sheet. Clean your hands first to avoid transferring color, then knead some white clay until it softens. Roll it into a thin sheet using an acrylic rolling pin. You can find it in the polymer clay aisle of an arts and crafts store.

If you can't find an acrylic rolling pin, you can use another smooth cylinder, such as a fat marker or a rolling pin.

3. Cut an "m" shape out of the sheet. This will make the body and face of your penguin. It needs to be the width as body, but a little shorter. Use a craft blade to cut the shape out.

4. Press the white "m" onto body. Be sure to match up the base of the "m" with the base of the body. You will have a slight gap between the top of the "m" and the top of the body.

5. Make a beak. Clean your hands, then knead some orange clay until it turns soft. Press it into a thin disk, then cut a small triangle out of it using a craft blade.

6. Attach the beak. Press the triangle into the middle of the white part on the body. Make sure that the pointed tip of the triangle is pointing downward.

7. Add some eyes. Roll two small balls out of black clay. Press each ball onto the penguin to either side of the beak. They should just barely be touching the upper corners of the bead.

If you don't have any black clay, you can skip this step, and paint the eyes on instead after you are done baking.

8. Insert an eyehook into the top of the penguin. Measure the eyehook against the penguin first. If it is too long, trim it down with a pair of wire cutters. Push the eyehook down through the top of the penguin.

9. Bake the penguin. Preheat your oven to the temperature specified by the manufacturer, typically between 215 to 325°F (102 to 163°C). Place your penguin onto a foil-liked baking sheet. Bake the penguin for the time recommended by the manufacturer, typically 15 to 20 minutes.

Each brand of clay will have different baking times and temperatures. Read the label on the clay's wrapper carefully.

If the eyehook is still look, put a little superglue around the seam.

10. Paint some feet onto the penguin once it cools. After the penguin is done baking, take it out of the oven and let it cool. Use a thin paintbrush and some orange, acrylic paint to add two small v's at the bottom of the penguin. If you don't have any paint at home, you can use an orange permanent marker instead.

11. Glaze the penguin, if desired. Get some glaze meant for polymer clay. Thread some string through the eyehook and tie it into a loop. Dip the penguin into the glaze, then lift it out. Let the excess glaze drip off, then hang the penguin by the loop so that it can dry.

Place a sheet of scrap paper under the penguin as it is drying to catch any excess glaze.

Tips.

You can bake your penguin in a convection over, regular oven, or toaster oven.

Most polymer clays bake at 215 to 325°F (102 to 163°C).

If the clay becomes too soft and squishy, set it aside until it becomes firmer. You can also put it into the fridge for a few minutes instead.

Clean your hands with baby wipes between colors. This keeps your fingers from accidentally transferring color between the clay pieces.

Gently brush the clay with a soft-bristled paintbrush after you are done sculpting, but before baking. This will help remove fingerprints.

You can make your penguin any color your want. Consider switching out the black for light blue, pink, or light purple.

If the clay is too hard to work with, knead it between your hands for a few minutes first.

If the clay is still too hard, add some clay softener into it. It is usually sold alongside the rest of the polymer clay.

Avoid mixing different polymer clay brands, as they tend to require different baking temperatures.

Glaze the penguin when you are done. You can apply the glaze with a paintbrush, and let it dry. If you added an eyehook, use the pin to dip the penguin into the glaze.



Warnings.

Do not bake your penguin in the microwave.



Things You'll Need

Making a Basic Penguin.

Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin, Oven.

Baking sheet, Aluminum foil, Black permanent marker or acrylic paint, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).



Making a Penguin Charm.

Polymer clay, any color (for body), Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin.

Oven, Baking sheet, Aluminum foil, Orange acrylic paint, Thin paintbrush, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).

Januari 25, 2020

how to easy build a ballista

How to Build a Ballista.

If you like medieval weaponry capable of flinging arrows through the air, try building your own ballista. A ballista consists of a frame, a launch ramp with a slide, and a tensioned string. You can build all of these components with popsicle sticks, thread, and other basic supplies. Add a launch pin to create a small ballista that enables you fire bolts with a pull of a string.







Part 1 Assembling the Frame.



Drill holes through a pair of 6 in (15 cm)-long popsicle sticks. Measure 1 in (2.5 cm) from the ends and mark the spots with a pencil. Before working on the sticks, lay down a piece of cardboard to protect your work surface from damage. Then, use a drill bit 1⁄4 in (0.64 cm) in diameter to create the holes.

The simplest way to create a ballista is with inexpensive popsicle sticks, available online, at craft supply store, and other areas.

If you wish to make a larger ballista, trying using larger pieces of wood or foam in place of the popsicle sticks.



Poke a second, smaller hole next to each of the bigger ones. Measure about 1⁄4 in (0.64 cm) along the stick’s length from one of the existing holes. Use a steel probe 1⁄16 in (0.16 cm) in diameter or a similar sharp tool to poke all the way through the wood. Position the hole so it’s slightly lower, closer to the edge of the stick, than the larger hole. Create a matching hole on the opposite end of the first stick and create corresponding holes on the second stick.

Each popsicle stick has 4 holes when you’re finished, a pair of holes on either end. The bigger holes are used to secure the ballista frame together, while the smaller holes are for the launcher.

To test the smaller holes, try squeezing a wood cocktail skewer through them. Get skewers about 7⁄64 in (0.28 cm) in diameter. Widen the holes as needed to fit the skewers.



Cut a pair of wood blocks to 1 1⁄2 in × 1 in (3.8 cm × 2.5 cm). The easiest way to do this is to purchase wood crafting blocks. If you can’t find the exact size you need, cut the blocks to size with a crafting knife or another tool. Get blocks that are about 1 in (2.5 cm) tall. Scrape away the excess wood until both blocks are the same size.

Shop online or visit a craft store to see what kind of wood blocks are available. You can use scrap wood if you wish, but crafting blocks are much smoother and easier to work with.

Be careful when using a crafting knife. The blocks are small, so it’s easy to slip while handling the blade. Work slowly to avoid potential accidents.

Image titled Build a Ballista Step 4

4

Glue the blocks to the ends of the popsicle sticks. Heat up a hot glue gun loaded with a fresh stick of white glue. Spread a layer of glue over the ends of the 1 of the sticks, then lay the blocks on top of that. Align the longer ends of each block with the edges of the popsicle stick. Spread another layer of glue on top of the wood blocks to secure the second popsicle stick.

Make sure you align the holes in the popsicle sticks before gluing them in place. The holes need to be positioned evenly over one another in order for the ballista launch its arrows later.







Part 2 Building and Attaching the Launch Ramp.



Cut about 1⁄2 in (1.3 cm) off the end of another popsicle stick. Trim this new stick to size by measuring and slicing it apart with your craft knife. Another safe way to do this is by snapping the end off with scissors or wire cutters. Trim any stray wood fibers off the cut end so it looks smooth and even.

Cutting popsicle sticks can be tricky since they are pretty fragile. Work slowly, gradually deepening the cut you make. Bend the popsicle stick back and forth along the groove you cut to prevent it from splintering.

If you have experience with wood cutting, try using a fine saw blade like a band saw. Always wear earmuffs, eye goggles, and a dust mask while operating a saw.



Trim a pair of cocktail skewers to 5 1⁄2 in (14 cm) in length. Get some wood skewers about 7⁄64 in (0.28 cm) in diameter. Measure and mark the skewers as needed with a ruler and pencil. Then, cut the skewers evenly on both ends to trim off the sharp points. The skewers need to be the same length as the popsicle stick you cut, so use it for comparison.

Wood skewers are available online in addition to some craft stores, general stores, and restaurant supply stores.

Cut the skewers by using a craft knife or by snapping the ends off with wire cutters.



Glue the skewers to the top of the popsicle stick. Place the skewers on the long edges of the popsicle stick you cut. Lay down a bead of glue from a hot glue gun to secure the skewers in place. Trim the ends of the skewers as needed to smooth them out and make them even with the ends of the stick.

Now you have a basic launch ramp. The skewers form a groove for you to load the ballista’s ammunition.



Secure the ramp to the center of the frame you built. Get your popsicle stick frame with the holes drilled in it. Turn the ramp over and spread some hot glue on the end of it. Then, secure it over the bottom popsicle stick in the frame. Put it as close to the center of the frame as possible, aligning the end of the ramp with the back edge of the frame.

Hot glue dries relatively quickly, so you don’t need to worry too much about the frame and ramp components coming apart. Set the pieces aside as needed for 10 to 20 minutes to give the glue a chance to solidify. It takes about 24 hours to fully cure.







Part 3 Creating the Launcher Mechanism.



Break a 4 1⁄2 in (11 cm) popsicle stick into halves. Divide the stick evenly into halves about 2 1⁄4 in (5.7 cm) long. These sticks are smaller than the frame pieces and are part of the ballista’s launching system. Use a craft knife or wire cutters to split the stick across its width and then smooth out the cut end.

Purchase a separate bag of smaller popsicle sticks online or at a craft store. Alternatively, cut smaller pieces of wood boards or foam if you’re making the ballista with those materials.



Poke a hole 1⁄2 in (1.3 cm) from the end of each stick. Use a 1⁄16 in (0.16 cm)-thick steel probe or a similar tool sold at craft stores. Make a single hole near the rounded end, leaving the cut end alone. Pierce all the way through the wood.



Pull pieces of string through the larger holes in the frame. Getting the string through the holes is tricky, so have a cocktail skewer nearby to push it through. Slide both ends of a string 7⁄64 in (0.28 cm) in diameter through the top hole, then through the respective hole in the bottom frame piece. Leave the string long enough to form small loops above and below the ballista frame.

Try using twine from a craft store for a strong material that isn’t likely to break when you’re having fun launching makeshift arrows.



Tie small skewers to the frame using the string loops. Cut a couple of wood skewers down to 1 1⁄2 in (3.8 cm) in length. Start with the top loop by placing a skewer inside of it and pulling the string tight. Then, tie the loose ends of the string into a knot with another skewer underneath it.

Lay the skewers flat against the frame pieces. Orient them so they’re perpendicular to the frame pieces. Then, tie the knots as tight as you can to hold the skewers in place.



Place the small popsicle sticks between the strings and tighten them. The popsicle sticks you cut earlier fit between the frame pieces. Slide about 1⁄2 in (1.3 cm) of the cut ends of the sticks between the ropes. Then, twist the bottom skewers clockwise to tighten the string as much as possible.

When the small sticks are positioned correctly, you can move them back and forth without them sliding out of place. This is necessary for moving the ballista’s launcher to let arrows fly a long way.



Slide another skewer into each of the inner holes on the frame. Cut 2 more skewers to 1 1⁄2 in (3.8 cm) in length to fit those holes. Make them look nice and even like the other skewers before fitting them through the frame. Make sure the skewers go all the way through the respective holes on the top and bottom frame pieces.

Protect the strings by tying the ends to the bottoms of these skewers, if possible. If you do this, the skewers maintain the string’s tension, leading to much more impressive launches!



Tie a length of string between the launcher’s stick arms. Set the ballista so the back end is in front of you. Thread the 7⁄64 in (0.28 cm)-thick string into the holes in the small popsicle sticks hanging from the ballista frame. Knot both ends of the string to secure it, then trim off the excess length.

The exact length of string you need to form the launcher depends on the material you used. Try threading the string through both holes before cutting it from the spool. Always cut it longer than you need so you can knot it tightly.







Part 4 Making the Slide and Supports.



Glue a block underneath the back end of the launch ramp. Get another 1.5 in × 1 in (3.8 cm × 2.5 cm) wood block. The block needs to be approximately the same width as the ramp in order to keep the ballista stable while you’re firing it. Set the ramp in the glue, aligning its back edge with the back end of the block.

Installing the block makes the ballista ramp slanted so it launches arrows higher into the air.



Cut grooves in a small block to create the ballista’s slider. Cut the grooves into a small piece of wood about 1.5 × 1 × 1⁄2 in (3.8 × 2.5 × 1.3 cm) in size. The launcher needs separate grooves in the front and back, both as thick as the string you used when tying the launcher arms together. Make the 2 grooves about 1⁄4 in (0.64 cm) from either end. Use a crafting knife to scrape away the wood, making the grooves circular and about half as deep as the block.

Try making the slider out of a wood peg bought online or a craft store. If you use scrap wood, make sure it is solid and smooth so you can slide it along the ramp.



Create a 1 1⁄2 in (3.8 cm) wood cap to fit on top of the slider. Simply cut a smaller popsicle stick to the exact length and width as the slider. Cut the cap into a rectangle with no rounded edges. When you’re ready to install it, put the launcher string into the slider’s front groove. Spread some hot glue, then press the cap onto the top of the slider.

Test the cap out by putting it on the slider before you add the glue. Check that it’s big enough to cover the slider and pin the string in place.



Drill 45-degree angle holes in a block of wood. This block needs to be about 2 × 1 1⁄2 × 1⁄2 in (5.1 × 3.8 × 1.3 cm) longer than the one on the back end of the ballista. Position the holes about 1 in (2.5 cm) from the smaller sides of the block. Use a drill bit approximately 1⁄4 in (0.64 cm) wide to drill diagonally towards the center of the block.

Drill all the way through the other side of the block. Keep the holes as even as possible to build a stable base for the ballista frame.



Fit wood dowels into the holes on the block. Use a pair of 1⁄4 in (0.64 cm)-thick dowels cut to about 4 in (10 cm) long. Slice them using a craft knife, wire cutters, or a saw if you have one. Then, put some hot glue on the ends of the dowels and push them as far into the holes as possible.

Look online or at a local craft supply store for the perfect dowels for your project.



Glue the block to the front side of the frame to stand the ballista up. Flip the block over and spread a thick bead of glue across its length. Lift up the front end of the ballista to stick the block to the bottom of the frame. After pressing the pieces firmly together, consider letting the glue dry for about 10 minutes.

If the block is wider than the frame, you could try whittling it down with a carving knife or craft knife. As long as your base is stable, doing this isn’t necessary, but it can make the ballista look a little neater.







Part 5 Completing the Firing Mechanism.



Glue long spacer pieces to the sides of the back block. Cut the spacer pieces so they are about 4 in × 1.5 in (10.2 cm × 3.8 cm) in size. Spread more hot glue, then press them against the block supporting the back end of the ramp. These parts are there to support the rest of the parts you need to add, so they don’t need to be pretty and can be longer than the block itself.

Make sure the spacer pieces stick out from underneath the ramp a little bit. The pieces that attach to them need to extend over the ramp or else you won’t be able to fire the ballista.



Cut 1 1⁄2 in (3.8 cm) off the ends of a large popsicle stick. Measure and mark the length you need to cut on one of the 6 in (15 cm)-long popsicle sticks. You need 2 of these pieces, so cut off both ends of the stick. Leave the rounded ends of the stick intact.

Cut the stick carefully with a craft knife, wire cutters, or saw. Work slowly to avoid splintering the wood and smooth out the edges as needed.



Make a hole about 1⁄2 in (1.3 cm) from the end of each piece. Create the holes by poking a 1⁄16 in (0.16 cm) steel probe or a similar sharp tool through the wood. Keep the holes along the center part of the wood. Make them as even as possible to ensure the ballista parts line up appropriately when you install them.



Glue the popsicle ends to the side pieces on the block. The sticks need to be near the tail end of the block. Also, position the sticks about 1⁄4 in (0.64 cm) up from the bottom edge of the block. Spread glue over the wood and press them onto the block to hold them in place.

Make sure the ends of the sticks extend over the ramp. The holes need to be about level with the top edge of the slider in order to string the launch rope through it.



Bend a metal rod to fit through the holes in the wood. Get a metal rod about 4 in (10 cm) long and about 1⁄16 in (0.16 cm) in width to fit through the holes. Pull the launcher piece back and thread the rod through its second groove and the holes in the sticks. Then, use pliers to bend one end of the rod back over itself. The rod forms a launch pin that stays in place until you're ready to use it.

Test the pin by attempting to move it. If it feels loose, bend the end back on itself more to keep the pin in place. Leave the other end of the pin alone so it can slide out of the hole.



Tie a string to the end of the launch pin. Cut some 7⁄64 in (0.28 cm)-thick string to complete the launching mechanism. Try trimming it to about 3 to 4 in (7.6 to 10.2 cm) in length. Knot the string a few times to the bent end of the launch pin to quickly pull it out when you wish to fire the ballista.

Keep the string at a comfortable length. If it is too long or short, you may have a hard time pulling out the pin in a quick, fluid motion.



Cut cocktail skewers to about 5 in (13 cm) for ammunition. Trim the pointed ends off of as many skewers as you wish to use. When you’re ready to use the ballista, put a single arrow on the chute after pulling the slide back. Yank the string to pull the metal pin out, causing the slide to spring forward, sending the arrow through the air.

Always cut the points off of the skewers to avoid accidents. Also, never shoot the arrows at others. They can hurt, especially from bigger launchers.







Tips.

Ballista arrows are reusable. Collect the arrows after you fire them to ensure you have a steady supply of ammunition.

Small ballista designs can be blown up to create big rigs capable of throwing arrows long distances. Many big ballistas use wood planks and thick rope like the kind available at hardware stores.



Warnings.

Firing a ballista can be dangerous. To be safe, clear an area outdoors and fire it when no one else is around.

If you choose to use a saw to cut components, follow proper safety procedures to avoid injuries. Always wear earmuffs, goggles, and a dust mask.



Things You’ll Need.

Ruler, Craft knife, Wire cutters or scissors.

6 in (15 cm)-long popsicle sticks, 4 1⁄2 in (11 cm) popsicle sticks.

1 1⁄2 in × 1 in (3.8 cm × 2.5 cm) wood blocks, 7⁄64 in (0.28 cm)-diameter wood skewers, 1⁄4 in (0.64 cm)-diameter wood dowels.

1⁄4 in (0.64 cm) drill bit, Drill.

1⁄16 in (0.16 cm) steel probe, Hot glue stick, Hot glue gun.

7⁄64 in (0.28 cm)-thick string, 1⁄16 in (0.16 cm)-diameter metal rod.

November 20, 2019

how to make minnie mouse ears

How to Make Minnie Mouse Ears.

Mickey's sweetheart has the fashion sense to wear a bow in her ears, but Minnie mouse has very similar ears to those of her beau. In some special costumes, Minnie has also been known to wear a crown, a Santa hat, and other seasonal accents between her ears. The ears are always black, of course, and the bow usually red with white polka-dots, but you can choose your favorite patterns and colors to make the bow you place between your Minnie Mouse ears.

Part 1 Making the Ears.

1. Gather the material for making your mouse ears. You will need black felt to give your mouse ears color and texture. A cardboard core will give your fabric rigidity and form. If you don't have any cardboard, you might be able to layer several pieces of rigid construction paper together with glue as a substitute. The material you use for the ears should be stiff enough to keep it from flopping around loosely once attached to the headband and if you don’t have felt, you can paint or color the cardboard black.

Black felt, Cardboard, Rigid construction paper (optional), Household glue, Plain paper, Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long).

You should be able to purchase everything you need for this project at your local fabric or craft store.

2. Purchase a headband and tools, if necessary. The headband can be any color, but it should be at least ½" (1.27 cm) thick. You will eventually attach your mouse ears to the headband, so thicker headbands might give your mouse ears greater stability. Including a head band, you should also purchase the following tools.

Headband, Hot glue gun (and glue), Household glue, Pencil, Pipe cleaner. Scissors.

3. Make two identical paper circle templates. You should trace two circles on your paper with a pencil or your chalk. Each circle should be between 3” and 5” (7.6 and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of the circle. These templates will be used to assist you in outlining the dimensions of your mouse ears on both fabric and cardboard.

The tabs will on the bottom of your circles will be used to secure the ears and the headband together.

You might be able to use the base of a bowl to help you in drawing identical circles for both of your templates.

4. Outline your felt circles onto your felt. Place your paper template on top of the felt and trace the circle with chalk onto it. You could use a piece of tailor’s chalk, or even regular chalk in a pinch. This way, you can wipe any leftover chalk away with a damp cloth.

Make four felt circles for every pair of ears you make. You will need to glue felt to the front and back of your cardboard core to make your mouse ears uniformly black.

5. Cut your felt circles. Take your scissors and follow the chalk outlines you've drawn to cut free your felt circles free from the fabric.You can add some jazzy flair to your mouse ears by using zig-zaggy pinking shears.

Pinking shears will add a cute border to your fabric and prevent your fabric from becoming frayed.

6. Trace cardboard circles for your mouse ears. These cardboard circles will form the core of your mouse ears, making it possible for them stand up straight, just like Minnie's! Use your pencil or a piece of chalk to trace the circle template onto the cardboard.

You will need two cardboard circles for every pair of ears you make.

7. Cut out your cardboard circles. Using your scissors, follow the chalk or pencil outline you drew with your templates onto the cardboard. Be sure you don't cut off your tabs! These will be necessary to connect your mouse ears to the headband.

You may need to touch up your cardboard and felt circles/tabs to make them as close to identical as possible.

Compare and trim your felt and cardboard circles by holding the cardboard and felt pieces together in a stack. Then you can trim down any irregularities.

8. Glue the felt to the cardboard. Household glue should be sufficient to attach a piece of felt to the front and back of each cardboard circle/ear. Drizzle glue back and forth along the cardboard and press your felt into place. Press the felt to the glue firmly for five to ten minutes help it set.

To create the best bond between your glue and the felt, you may want to allow your glue to rest for 30 minutes to an hour.

Part 2 Attaching the Ears to the Headband.

1. Spread hot glue along the tabs of the ears. Regular household glue won’t hold up to wear and tear as well as hot glue. The special glue used in hot glue guns, however, is much more durable. It will create a firm bond between ear and headband.

You'll have to move quick after you apply your hot glue. The glue will dry quickly soon after application.

Hot glue fresh from the gun will be very hot. Be careful not to burn yourself.

2. Hot glue the tabs of your circles to the underside of the headband. Your circles should be at least 4” (10 cm) apart so that you have room for the bow that will go between the ears. You may want to mark your headband with your chalk where you'll be attaching the ears to prevent yourself from gluing them into the wrong place.

If your headband is flexible or will permit the use of staples, you could also use a hardy stapler to connect the tabs of your mouse ears to your headband.

3. Allow the glue to dry thoroughly. Playing with your mouse ears before the glue has completely dried could cause your mouse ears to come free of the headband. To ensure you don't have to re-glue any of your pieces together, you should allow your glue to firm for 30 minutes to an hour.

4. Style the ears into position. Your mouse ears might not stand straight up like Minnie Mouse's at first. To encourage your mouse ears to hold this position, fold both up and forward. The glued tabs will keep the ears in place.

Part 3 Creating the Bow.

1. Measure and cut a 10” (25 cm) length of ribbon or fabric. You can use either ribbon or fabric for your bow, although ribbon will likely be a little shinier and look more like the bow Minnie wears. In either case, it should be 5” to 8” (12.7 to 20.3 cm) wide. You will eventually gather this fabric around its middle, which will cause the sides to fan out. This will give your bow its shape.

Thicker cuts of fabric will create more bunching when you gather this piece around its middle, which will give your bow a fuller appearance.

2. Measure and cut a 3” (7.6 cm) gathering string. This is the piece you will use to gather the fabric around the middle of your 10" (25 cm) length of ribbon. You should use a similar kind of fabric to your 10" (25 cm) ribbon, but you could also add some pop to your design by using a contrasting color fabric.

For example, if you are using Minnie's traditional bow color, red with white polka-dots, you might choose a bold blue for your gathering string.

3. Lay the 10" (25 cm) piece of ribbon on a flat surface. Put the print side face down. You're going to want to glue your gathering string along the back of your bow, which will be the same as the opposite side of the pattern.

4. Fold the long ends your 10" (25 cm) ribbon toward its center. You'll want each side to overlap slightly at the center of your 10" (25 cm) length of ribbon. Fold one end at a time so that there is enough overlap to glue these side where the meet at the center of the ribbon.

5. Glue the folded inward ends at the overlap. It should only take a dab or two of hot glue or fabric glue to join the ends together firmly. Press the fabric firmly to create a stronger bond between the fabric and glue.

You should follow the directions on your glue to achieve the best bond. Some glues will set and cure faster than others. Generally, you should hold the glue firmly for one to five minutes for best results.

6. Arrange your ribbon into a bow shape. Use one hand to pinch your ribbon together toward its centermost point from the top and bottom edges. This will be easiest to do if you are working with a ribbon that is at least 5” (12.7 cm) wide.

Pinching your ribbon together tightly will cause the outside edges to flare out more dramatically.

7. Loosely wrap your gathering string around your bunched ribbon. The 3” (7.6 cm) piece of ribbon will hold the fabric of your bow in its flared position. Wind it around several times and then remove your fingers where you were pinching the bow in the middle.

Hold the ribbon with your free hand to make sure it doesn't come unwound or loose.

Wind the remaining length of your ribbon around the center tightly.

8. Glue the gathering string in place. Lift one end of the small piece of ribbon and apply a dab of hot glue or fabric glue. If using hot glue, you should be careful not to burn yourself by pressing on the fabric immediately after glue application.

To apply pressure to make the best seal between your hot glue and fabric, you might use a tool to prevent getting burned, like a paperweight, gloved hand, or tweezers.

Fabric glue and other cold glues should be held together firmly to encourage a strong bond. Press the glued piece of ribbon together. Hold this position for about 30 seconds to a minute.

Part 4 Attaching the Bow to the Headband.

1. Slip a pipe cleaner through a fold in your bow. The bunchings of your bow fabric should have created folds through which you can thread your pipe cleaner so that it passes under your glued gathering string.

If you find it difficult to feed your pipe cleaner through a fold and under your gathering string, you can always use glue to attach the pipe cleaner along the back of your bow.

A dab of hot glue onto the back of your gathering string should be enough to hold your pipe cleaner in place.

2. Cross one end of the piper cleaner over the other. Orient your pipe cleaner so it is equal length on both sides of your gathering string. Now cross the sides of your pipe cleaner at the midpoint over the front of your gathering string and add a twist.

This will prevent the pipe cleaner from slipping out of the bow while adding stability to the bow in general.

Experiment with different colored pipe cleaners to personalize your Minnie Mouse ears!

3. Secure your bow with the loose ends of the pipe cleaner. Center the bow between the ears. Then you're going to wrap each end of the pipe cleaner around opposite ends of your headband. Twine each side of the pipe cleaner down opposite ends of the headband until you go no further.

The ends of pipe cleaner can be pointy. To prevent the wearer from getting poked, you may want to turn these inward on your headband. The ends can also be taped to the headband as an extra precaution.

By attaching your bow to your mouse ears with a pipe cleaner, you'll be able to swap out different bows without having to make a new pair of mouse ears.

Twist ties can be used to reinforce your pipe cleaners if you find the pipe cleaner windings are not holding the bow in place well enough.

4. Add finishing touches and show off your mouse ears. Minnie, being a stylish mouse, would probably go ga-ga over some rhinestones, glitter, feathers, or other accents you might add to your mouse ears. Most of these can be attached with a small dab of hot glue. Once you've finished adding your finishing touches, you should show off your mouse ears to all your friends.

Tips.

Use a black felt tip marker to color white pipe cleaners if you don't want the white to show too much.

Warnings.

Hot glue emerges from the gun applicator at a very high temperature. Whenever using hot glue, you should follow the instructions that came with your glue gun and take care.

Things You’ll Need.

Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long), Black felt, Black felt tip marker, black crayon or paint (optional), Cardboard.

Chalk, Foam (optional), Headband, Hot glue gun, Household glue, Pipe cleaner, Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019

how to make a ball

How to Make a Ball.

Balls provide endless entertainment for kids and adults alike, so make your own if you want a fun toy to play with this weekend. But there are balls for other occasions, too. If you’re having a rough week, for instance, create a stress ball to squeeze when you just want to scream. Or get creative and make balls out of things like rubber bands, fabric, and even cheese!

Method 1 Making a Bouncy Ball.

1. Combine school glue, cornstarch, and any add-ins in a bowl. Stir together the 1 tablespoon (15 ml) of school glue and 1 tablespoon (15 ml) of cornstarch until they’re thoroughly combined, using a spoon or wooden stick. If you want to add any extras, like food coloring or glitter, do so now.

You can use either white or clear school glue. If you use white glue and don’t add any coloring, your ball will be white.

Fun Add-Ins for Your Bouncy Ball

Sprinkle in glitter for a little extra sparkle.

Squeeze in a few drops of food coloring to make a ball in your favorite hue.

Stir glow in the dark paint into the glue for a ball that can be used at night.

Swirl 2 colors of food coloring together if you want a multi-colored masterpiece.

2. Stir warm water and Borax together in a separate bowl. Mix 2 tablespoons (30 ml) of warm water and 1⁄2 teaspoon (2.5 ml) of Borax until the Borax is completely dissolved. Stir vigorously to ensure there are no clumps of powder left in the bowl.

Heat the water in the microwave or on the stove until it’s warm to the touch. It shouldn’t be boiling.

You can find Borax in the laundry aisle of a store.

Borax is safe to use, but it's poisonous if ingested in large quantities. If you or your child get it in your eyes or mouth, contact poison control immediately.

3. Add 1⁄2 teaspoon (2.5 ml) of the Borax mixture in the bowl with the glue. Do not stir the ingredients together when you add them. Simply pour the Borax and water into the other bowl containing the glue and cornstarch.

Set aside the remaining Borax mixture if you plan on making more balls.

4. Let the mixture sit for 15 seconds. This allows time for the Borax to react with the glue, making the polymers of the glue link together which will create the ball shape. If you start stirring right away, the bouncy ball may not form or harden properly.

Set a kitchen timer or use the clock app on your phone to keep track of the time.

5. Use a spoon to combine the ingredients until they’re too thick to stir. Within 1 to 2 minutes, the mixture will thicken. Stir vigorously while the mixture is still liquid to make sure the ingredients are blended well.

Choose a sturdy spoon, like a metal or thick plastic one. Something flimsy, like a plastic spoon, will likely break off in the goo.

If you’ve made homemade slime with Borax, this process is very similar.

6. Remove the mixture and roll it between your hands to form a ball. Once the mixture is too thick for your spoon or stick, pull it out of the bowl and place it between your palms. Roll it around by moving your hands in circular motions until the ball is no longer sticky.

The more you handle the ball, the more firm it will become.

If you’re having trouble getting rid of the stickiness, dip the ball in the Borax water, then roll it a little more. This should remove any tacky texture.

7. Let the ball harden for about 10 to 20 minutes before you use it. This dries the ball a little more, so that it’s extra bouncy. If the ball starts to flatten while it sits, simply roll it back into shape when you’re ready to play with it.

Once you’re done playing, store the ball in an airtight container to prevent it from drying out. Keep it in a cool, dark place, like the pantry.

If stored properly, your ball could last for up to 6 months. It won’t go bad, but it will dry out eventually.

To make more bouncy balls, mix up another batch of glue and cornstarch and use some of the leftover Borax and water mixture.

Things You'll Need.

2 tablespoons (30 ml) of warm water, 1⁄2 teaspoon (2.5 ml) of Borax, 1 tablespoon (15 ml) of school glue, 1 tablespoon (15 ml) of cornstarch.

Spoon or wooden stick, 2 cups or small bowls, Food coloring or other add-ins (optional), Airtight container (optional).

Method 2 Creating a Paper Soccer Ball.

1. Trace 20 hexagons on white paper, then cut them out. Draw your hexagons on the paper with a template, making each side the exact same length. Use scissors to carefully cut along the traced shapes, then set them aside.

If you want a life-sized soccer ball, make the edges 2 inches (5.1 cm) long.

To make a template, use a ruler to draw the hexagon shape on a piece of cardboard. Cut it out and trace around it with a pencil to make each paper hexagon.

Cardstock is the best type of paper to use for this craft. It’s sturdy enough to hold the shape of the ball yet still easy to fold.

2. Trace and cut out 12 black pentagons with sides the same length. The edges of the black and white pieces need to be equal so that they fit together properly. Use a template to draw your pentagon shapes, then cut them out with scissors.

For example, if you’re creating a life-sized ball, make your pentagon sides 2 inches (5.1 cm) long.

You can use a different color paper instead of black, or get creative and make a multi-colored ball with a variety of shades.

Cut a pentagon template out of cardboard to trace on the black paper so that the pieces are all equal size.

3. Fold up a thin border around each hexagon and pentagon. This edge will allow you to build your ball seamlessly, so there are no gaps between pieces. You only want to fold enough of each edge to have a place to apply glue or tape. Keep the border size equal on each piece so they all remain the same size after folding.

To fold the same border on each piece, trace the border before you fold, using a ruler to ensure each edge is an equal width.

Use a straight edge, like a ruler, to help you fold the edges in a perfect line.

If the edges are crooked, re-fold them. They have to be straight for your ball to be the right shape.

To make folding easier, snip off the corners of your border before you fold. This allows you to fold the edges up without dealing with corners that crumple up or stick out.

4. Apply glue or tape to the folded edges of each piece. This is how you’ll stick the the pieces together to form the ball. Swipe glue on each of the edges of all the hexagons and pentagons. You can also use a strip of tape on the edges instead.

A glue stick will work better than liquid glue to prevent the paper edges from getting soggy.

If you are slow at putting the ball together, you may want to apply the glue as you go, rather than all at once. Otherwise, it will dry out on the final pieces by the time you get to them.

5. Attach 5 white hexagons to 1 black pentagon. On a standard soccer ball, each black piece is completely surrounded by white pieces. Press 1 white hexagon onto each edge of a black pentagon. Hold the edges together until the glue dries.

If you’re using a glue stick, the glue will dry almost instantly. Wait about 5 to 10 seconds while pressing the edges against one another.

6. Continue gluing the pieces together in this pattern, forming the soccer ball. On the other edges of the white hexagons that you attached to the original pentagon, glue more black pentagons. Don’t forget to glue the white edges that touch each other, too. Once you connect all of the pieces, you’ll have a ball shape.

A black piece should never touch another black piece. However, white edges will touch other white edges.

If you’re having trouble visualizing the pattern, look up an image of a soccer ball online as a guide.

You can stuff the ball with shreds of paper if you want to create a fuller shape.

Things You'll Need.

Black and white sheets of paper, Scissors, Cardboard.

Pencil or pen, Glue stick or tape, Homemade Stress Ball, 12 in (30 cm) latex balloon.

Method 3 Using Play Dough for a Homemade Stress Ball.

1. Use your hands to roll play dough into a long shape. Place a pile of play dough on a flat surface, then gently roll it out with the palms of your hands. This should form what looks like a snake.

It doesn’t matter what color play dough you use, since it will just be going inside the balloon.

Buy pre-made play dough or make your own at home.

If you buy play dough, use one 5 oz (140 g) container per balloon.

2. Insert the play dough into the balloon. Stretch the neck of the balloon open as wide as you can, then stuff the play dough snake into the balloon. The play dough should fill the balloon just to the base of the neck.

If there is a lot of empty space in the balloon, add more play dough.

Stretch out the neck of the balloon before you insert the play dough to loosen it up.

This step is easier if you have someone else hold the balloon open while you put the play dough inside.

3. Tie a knot in the neck at the top of the balloon to secure it. This will keep all of the play dough inside the balloon. Wrap the neck around your finger to make your knot, tying it as tightly as possible.

If you want extra protection, you can place your original balloon inside another empty balloon before tying it shut. This adds a double layer in case you poke a hole.

You can decorate your stress balls with permanent markers if you’d like. For example, you could draw a funny face or write a calming phrase, like “just breathe.”

Things You'll Need.

Permanent marker (optional).

Method 4 Forming Other Types of Balls.

1. Build a rubber band ball for a creative way to store supplies. Instead of tossing your rubber bands in a drawer, keep them together in 1 big ball. Fold up a thick rubber band to form the center, then begin wrapping all of other bands around it. Criss-cross directions often to round out the ball.

You can also wrap your bands around a bouncy ball or crumpled-up piece of paper for a larger ball.

Start with smaller rubber bands, then add the larger ones as the ball gets bigger.

2. Sew a fabric ball if you want a soft toy for kids or pets. Young children, particularly babies, could get injured by hard rubber balls. Instead, stitch together a ball out of strips of fabric, then stuff it with polyfill for a plush feel or use dried beans for a bean bag texture.

This also makes a great pet toy for dogs to chew on or for cats to bat around. If the ball is for a pet, pick a durable fabric like vinyl or nylon and keep your pet in sight as it plays with the ball.

You can use a sewing machine to make your ball or sew it by hand.

Cotton is ideal for kids’ toys since it’s a long-lasting and soft fabric that’s easy to wash.

3. Use ice to make a ball for a unique cocktail add-in. Not only do ice spheres look much cooler than regular cubes floating in your drink, they also melt slower, so your beverage doesn't get watered-down as quickly. Fill a silicone ice ball mold with water, then place it in the freezer for at least 6 hours, or until the balls have set and hardened.

For extra flair and flavor, add things like fresh herbs or edible flowers into the water in the mold before it freezes.

You can buy ice ball molds from a kitchen store or online retailer.

4. Make a cheese ball if you’re having people over for dinner or a party. When it’s your turn to play host or hostess, whip up a cheese ball as an impressive appetizer. Mix together cream cheese and other soft cheeses, shape it into a ball, then chill it in the refrigerator. Roll it in chopped nuts and other garnishes before serving.

You can substitute mascarpone, neufchatel, or goat cheese for the cream cheese if you’d like.

Pair any type of softer cheese with the creamy base, depending on your taste preferences. As long as it’s not a dry, crumbly cheese like parmesan, it will work.

Serve a cheese ball with finger foods for dipping, like crackers, pretzels, or raw veggies.

Warnings.

Borax is poisonous. Get help immediately if you accidentally ingest it or get it in your eyes.

Never let young children handle Borax without close supervision.

Januari 20, 2020

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020