Glue sticks can be melted down for a number of applications. Whether used in crafts, manufacturing, packaging, fashion, or in any other creative function, glue sticks are a cheap and easy to come by product. All-purpose or school glue sticks and hot glue gun sticks can both be melted in the microwave, and hot glue gun sticks can, of course, be melted in a glue gun. If handled carefully and done properly, the processes are extremely quick and can help you adhere all kinds of surfaces to one another.
Microwaving Glue Sticks
Remove the glue sticks from their original packaging. All-purpose or school glue sticks can be unscrewed and pulled or broken off from their plastic casings. Hot glue gun sticks simply need to be removed from any packaging or wrappers.
Make sure there are no plastics or other wrappings in or on the glue you want to melt. Most wrappings and plastics are not intended to be melted and can be unsafe to do so.
If your glue stick has a plastic piece through the center, carefully cut the glue away from the plastic using a knife.
Put the stick(s) into a microwave-safe dish. Since the glue will be very messy and hard to clean, use a single-use paper bowl. If you are dedicating the dish to the craft of melting glue sticks, a ceramic or glass mug or bowl will also work.
Be sure the glue sticks are fully inside of the dish. If they overhang the mug or bowl, they will melt outside of the dish.
Start with smaller quantities to test how long your particular glue takes to melt.
Microwave the glue on full power in 20-second intervals. Depending on your microwave and amount of glue, you should at least be able to partially melt the sticks. If there are still solids, microwave the glue for an additional 20 seconds after stirring it with a craft stick or plastic spoon.
Do not leave the microwave unattended. If something goes wrong, you should be there to stop the microwave.
Do not heat the sticks for extended periods of time. It may look like nothing is wrong while it heats, but overheating the glue can create fumes that are unsafe.
Remove the glue from the microwave carefully. You should use it immediately, but be careful as the glue will be quite hot. Depending on how long it was heated, the dish can be hot as well.
Use the glue fresh out of the microwave so it will be easy to apply.
If the glue re-hardens, simply microwave it for another 20 seconds.
Melting Glue Sticks with a Glue Gun
Obtain a glue gun at least as big as the glue sticks. Only use hot glue sticks intended for glue guns—not all-purpose or school glue sticks. If the sticks won’t fit into the glue gun, you cannot melt them. If the sticks are too small, you will just have to use your hand to feed them through.
Make sure your glue sticks are meant for a glue gun. You should not use other types of glue sticks because they can damage your glue gun.
Plug in the glue gun over cardboard or newspaper. As the tip of the gun heats, the gun may start to drip as it melts. By putting a piece of cardboard or newspaper underneath, you can protect your working surface.
Always follow the instructions specific to your glue gun regarding electricity and timing.
Do not leave a glue gun unattended. They can tip over or otherwise cause severe burns if you are not careful.
Squeeze the trigger of the glue gun to feed the sticks. If the sticks match the size of the glue gun, the trigger will allow the stick to press and feed through the heated tip. The glue will then melt and drip out wherever you point the gun.
Do not touch the metal tip of the gun or the melting glue. They will both be extremely hot.
If the glue is not feeding through, it may either be too large of a stick or may still be heating up.
If your glue stick is smaller than the glue gun, you will have to push from the back end of the stick to feed it through.
Use gloves to protect your hands from the heated materials.
Insert another stick once the first no longer feeds through. If the gun or your fingers can no longer safely feed the first stick through the rear of the glue gun, use another glue stick to press it through. It will then be caught by the plastic feeding mechanism and continue melting.
Warnings.
Do not touch melted glue. It will be extremely hot and adhere to your skin, making the burn worse.
Do not inhale melted glue fumes. Some glues are non-toxic, but not all of them are. Regardless, the fumes can be dangerous, and you may need to wear a respirator while working.
If you’re a glitter lover, chances are you’ve run across crafts and body glitters that are susceptible to flaking off and leaving a glitzy, sparkly trail behind you. Luckily, there are a few different ways you can craft with and wear glitter so that it doesn’t fall off so easily. Try using Mod Podge to seal in the glitter in your crafting projects, or mix cosmetic-grade glitter with different beauty products to create your own body glitter.
Using Mod Podge for Crafts.
Add a layer of satin or gloss Mod Podge to your craft. Use a foam brush or paintbrush, depending on your craft, and lightly brush a thorough layer of Mod Podge onto the surface area of whatever you are looking to cover in glitter. Make sure the entire area is coated and that there are no bare spots.
You can even make your own Mod Podge at home to save money!
If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time.
Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.
Dust, pour, or poof the glitter over the Mod Podged area. Depending on the kind of glitter you are using, you might apply it in a slightly different way. The main thing to remember is that you want to completely coat the Mod Podge in glitter and not leave any empty spaces.
You can also use a foam brush to spread on your glitter if you want a little more control over how much you use.
If you are looking for a high-glitter outcome, you can apply a second layer of Mod Podge and glitter immediately after the first one without waiting for it to dry first (it will take a little longer to dry after the second coat, then, but it will be highly glitterized).
Allow the glitter and Mod Podge to dry for 1-2 hours. Leave your newly glittered item alone for several hours or until it is dry to the touch. Try to leave it in a position so that the Mod Podge and glitter isn’t touching any other surface.
If you are adding glitter to multiple items, this is a great time to continue working on those projects while you’re waiting for others to dry.
Apply a top layer of Mod Podge to seal in the glitter. Once the first layer is dry to the touch, use your sponge or paint brush to add another thin layer of Mod Podge to your item. Use long, even strokes to reduce the appearance of brush lines. Make sure you cover the entire item and don’t leave any raw glitter poking through.
You could also use watered down school glue to create an opaque sealant for your crafting project.
The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.
Let your finished craft dry for 3-4 hours before you use it. Depending on how thickly you applied the Mod Podge, you may need to wait anywhere from 3-12 hours before you can safely use the item without potentially messing up the application. Always check the directions on the bottle for tips and guidelines.
If you have a dehumidifier, you can set your craft in front of it for a speedier drying time.
Never place your item directly in front of a heat source, like an electric heater or a hair dryer, as this may cause the Mod Podge to melt or change consistency so it doesn’t dry correctly.
Coat flaking items with sparkle Mod Podge to seal in the glitter. If you have an item that has glitter that is flaking off, you can apply pre-glitterized Mod Podge to add back some sparkle and lock in the remaining glitter. Simply use a sponge or paint brush to apply a thin, even coat of the sealant to the item, then let it fully dry before you use it again.
Make sure to work on a protected surface, like a counter covered in newspaper or paper towels.
Mix Mod Podge with your glitter of choice for a stronger glitter look. Pour some Mod Podge into a disposable cup or bowl and mix in as much glitter as you want to make your own glitter sealant. You can make the glitter as weak or as strong as you prefer. Then follow the instructions to apply the Mod Podge and let it dry.
You can also apply your glitter Mod Podge, another layer of glitter, and then top it off with the glitter Mod Podge again for even more glitter fun.
Wearing Body Glitter.
Combine body oil and loose glitter for an all-body glitter-wearing option. Instead of sprinkling loose body glitter on your arms and hoping it doesn’t fall off, combine body oil and loose glitter in a travel-sized shampoo container. Shake the container up really well, and then apply it to your arms, legs, chest, or face whenever you need an extra glitter boost.
While you could purchase body oils or lotions that already have glitter in them, it can be less expensive and more fun to do it yourself.
Put petroleum jelly on your skin and add body glitter for a sparkly look. Use a clean makeup or paint brush and apply an even layer of the petroleum jelly to the area you want to cover in glitter (like your collar bones, shoulders, or even your hairline). Then use another clean brush or your hand to gently press loose body glitter onto the jelly.
Visit a cosmetics store to buy body-specific glitter, which is usually a slightly different consistency than the glitter used for crafting.
If you don’t have petroleum jelly, you could also use hair gel as the sticky base for your body glitter.
Use this method in areas that aren’t going to come into frequent contact with other surfaces. For example, it probably wouldn’t work well on your legs if you are going to be sitting and standing and walking around often.
Mix hairspray and glitter to create glitter brow and hair gel. Spray hairspray into a dish, like a small cup or bowl (or even a disposable Dixie Cup), and add loose glitter. Mix it around with a toothpick or a spoolie brush, and then apply it carefully to your eyebrows or to select strands of your hair.
Do not use the glitter and hairspray mix on your eyelashes as it could irritate or infect them.
Wear vibrant lipstick and then add loose glitter for a shimmery lip look. Steer clear of sticky or glossy lipsticks and stick with a cream base to keep the glitter in place better. Put on a layer or two or lipstick, then use your fingers to gently press loose glitter into your lips.
With this trend, you’ll want to avoid pressing your lips together or eating or drinking anything too messy.
Create a glitter stamp from a makeup sponge and loose glitter. Cut a makeup sponge into a fun shape (like a heart or a star) and dip one side of it carefully into loose glitter. Spread a thin layer of petroleum jelly or hair gel on your body where you want the stamp, and then press the makeup sponge onto the jelly to transfer the glitter.
Your glitter stamp should stay on all day as long as it doesn’t brush up roughly against anything else.
Keeping Glitter on Clothes.
Use hairspray for a quick fix on your glitter clothing. Take your item of clothing outdoors or to a well ventilated area, and lay it down completely flat. Then spray a light coat of hairspray overtop of the glitter. Use unscented hairspray if you can. Allow the hairspray to dry completely before you wear the clothing item.
Hairspray is a great, quick fix, but overtime it doesn’t hold up, though you can reapply hairspray when you need to. Long-term, you just have to care for and store glittery clothes very carefully.
Affix glitter to your clothes with fabric glue. Lay out your item of clothing in a clean workspace, and apply the fabric glue in whatever patten you want. Then, carefully shake loose glitter overtop of the glue, coating it so that none of the glue is visible. Let the glue and glitter dry for several hours before picking up the item and shaking off the excess glitter.
You could even make a stamp out of a sponge and decorate your shirt that way (like stars all over a t-shirt), and then shake the glitter on top of the design.
Wash glittery clothes sparingly and let them air-dry. When you go to clean your clothes that have glitter on them, try to wash then only when they really need it. Use cold water and the delicate cycle in the washing machine, and don’t put them into the dryer. Instead, hang them up to air-dry.
You could even take your glittery clothes to a dry cleaner instead of washing them yourself.
When crafting with glitter, try working over a cooking tray. You’ll catch all the excess glitter that falls off and can easily return it to its container.
When making your own body glitter, try to use cosmetic grade glitter rather than crafting glitter.
Store your glittery clothes in plastic bags to protect them from rubbing up against other items in your closet (and to protect your other clothes from getting glitter all over them).
You’re home from the beach with a collection of shells. And now you need something to do with all of them! While we have these adorable seashell creatures on the blog, the kids will love making this school of seashell fish too! They’d look great in a shadowbox frame on your child’s bedroom wall.
Fish made out of sea shells.
SEASHELL FISH.
No trip to the beach this summer? Doesn’t matter! Seashells are readily available at craft stores, but you can also find them at garage sales, thrift stores, and even flea markets. Often times they are sold in big bags, which is how I found most of mine. I always look for them when I’m out at garage sales though!
We love seashell crafts, we even have one for adults, pretty seashell wine charms! They make great party favors or to have just because.
Seashell Fish with googly eyes.
WHAT YOU NEED TO MAKE SEASHELL FISH.
Assorted seashells.
Googly eyes, various sizes.
Hot glue gun or instant grab.
To make these fish, you’ll need seashells in assorted sizes; big ones for the bodies and smaller ones for the fins. You’ll also need googly eyes and some hot glue. You can also use instant grab glue if you prefer not to use a hot glue gun with the kids.
White craft glue is a little harder because it takes longer to dry and the shells may not stay put, so look for a fast drying type.
Lay the shells out first, deciding how you want your fish to look.
Then simply glue them together and add your googly eyes!
