how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make felt animals

How to Make Felt Animals.

Arts and crafts are always a lot of fun, but have you ever tried making felt animals? It’s a challenge but also pretty rewarding. You can make large or small animals depending on how much time you’re willing to commit to the process. Felt animals are great for gifts or just to keep around the house. The best thing is, they’re pretty easy to make!

Method 1 Preparing to Build Your Felt Animal.

1. Buy some felt and stuffing. Obviously if you want to build a felt animal you’re going to need some felt. Poly-fill stuffing is most common, but you can also buy cotton or even bead if you would prefer to work with that material.Stuffing is important to give your animal some structure. You can buy both these materials at an arts and crafts store.

2. Download your pattern piece. There are many pattern pieces that you can find out on the Internet. Pattern pieces are traced onto the felt and then cut out so that you have all the component pieces of your felt animal.

You can also try creating your own pattern piece. If you want to make a simple animal like a snake your can use four very elongated football shaped pieces. Make sure all your football shaped pattern pieces are the same size. Measure the width of each piece at its midline to figure out how wide your snake is going to be. Take that number and multiply it by four to get the circumference of your snake. Use this information accordingly as you make the body. You'll want the length of the snake to be four times larger than the circumference of the snake. Make sure you have enough felt! That's the idea behind making pattern pieces. You can add eyes and a tongue with extra fabric.

Remember to leave 1/4 of an inch extra room in the pattern piece for sewing purposes.

3. Gather your scissors, stitching, and sewing supplies. If you don’t already have these supplies you can buy them at an arts and crafts store too. You can use a sewing machine if you have one available, but felt is easy to work with. You can just use a needle and thread.

Method 2 Assembling Your Felt Animal.

1. Cut out the pattern pieces from the felt. You’ll want to enlarge your pattern piece to the size you want your animal to be. Make sure that you allow for a 3-millimeter seam allowance. That means you need that much extra space for the animal to fit together once you stitch it.

For example, if you were sewing a mini dog together you would have eight pattern pieces in all. Two body pieces, two head pieces, one belly piece, one back piece, one crown piece, and one tail piece.

A snake would only have the long four football shaped pieces.

2. Start stitching the corresponding pieces together. For example, if you were making the mini dog you would start by sewing the body and head pieces together. In the pattern piece layout there will be letters that correspond with where each part connects. For this little dog, you’ll be sewing the two head pieces on top of the two body pieces.

3. Sew the two body pieces together. Now you’ll connect the two pieces. You won’t be sewing all the way around obviously. Only sew the top half of the body together as the letters indicate. For example, if you were making this little felt dog you would start to see the outline of your animal.

If you made your own pattern pieces for the snake you'll just want to connect each of them to form a cylinder.

4. Add your connecting and additional pieces. For example, if you were making the little felt dog you would need to add the crown piece to the top of his head. Once the body pieces are together you can start to figure out how to fill in the gaps. The little felt dog also requires a brown speckle on his back to fill in the hole on is back.

5. Connect your belly piece. The belly piece is generally one of the last pieces to add. Using the little dog as an example, you would turn the body pieces upside down and add the belly piece to the bottom around the edge.

6. Don’t forget to leave an opening. You absolutely need this opening so that you can stuff your animal. If you forget to leave the opening you’ll have to undo your stitching or start all the way from the beginning. The little dog example has a hole already built in for stuff, but you might need to leave your own hole.

Method 3 Finishing Up.

1. Turn your animal inside out. The little dog pattern piece leaves a hole in the stomach for you to turn your animal inside out, but you might need to leave your own hole if you are making a different felt animal.

2. Stuff your animal. Using the whole you left stuff your animal thoroughly with polyester fiberfill. Make sure the animal is well stuffed but not over stuffed. You want the animal to feel firm without looking like it is going to explode. Use your judgment.

3. Add your embroidery. You can add whatever pieces you want. The little dog calls for small beads for eyes and some black string for the mouth and nose. You can add designs all over the felt if you desire though.

The snake embroidery would consist of little sewing on black circles of fabric or string for eyes, and a little piece of red felt for the tongue. Draw a tongue that appeals to you. Most snakes have forked tongues.

4. Stitch up your final body pieces. This would be the time to add ears, tails, or whatever else your animal might have connected to their body. The little dog will have a tail stitched to the back of his body and two ears connected on top. Remember to turn your body pieces inside out after you sew them to hide the stitching.

Follow the letters on your design piece. If you aren’t sure what pieces are added where, look at which letters correspond to what pieces. For example if you are adding ears to the top of a dog there will be the same letter on the ears as on the top of the body piece. Anywhere with matching letters is supposed to be connected with stitching.

Desember 12, 2019

how to make colored salt

How to Make Colored Salt.

Colored salt is used for art and craft, for decoration, for teaching skills with writing or drawing, and for making rangoli for Diwali. It's easy to make, and depending on the exact items in your craft or kitchen cupboard, you might even be able to make it without buying a thing.







Coloring Salt with Paint.



Fill a container with salt. A jug or pitcher, a deep bowl, a plastic food container, etc. will all suffice.



Squeeze a little tempera paint into the salt.



Mix with a spoon or other item. Stir until the paint is evenly distributed through the salt.



Let stand overnight to dry.

Make as many more colors as you need for your project. That way, they'll all be ready at the same time.



Test before using. Check that the salt has dried before using in your craft, rangoli, teaching, etc. projects.









Coloring Salt with Liquid Food Coloring.



Use liquid food coloring for this method. Choose a color or colors that you wish to work with.



Tip the salt into a resealable bag.



Add the liquid food coloring to the salt. It's recommended that you do this gradually, a drop at a time, so that you can intensify the color as needed and stop when you're happy with it. The more drops added, the more intense the color.



Carefully press the air from the resealable bag without losing the salt. Seal. Wait for around a minute before proceeding, to give the salt time to settle.

Image titled Make Colored Salt Step 10

5

Press down on the bag again and again. This will move the coloring around all of the salt. Knead until you can see that the color has permeated all of the salt in the plastic bag.



Done. The salt is now ready for use. If you see any salt that is damp, let it dry before use, by allowing air into the bag and waiting a few hours more.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Gel Food Coloring.



For this method, use gel-based food coloring. You should find it dries instantly and won't leave any liquid, which may be the case with liquid food coloring.



Tip the salt into a resealable bag.



Add the gel food coloring. Transfer the gel using an implement such as a wooden or metallic skewer tip, the end of a butter knife or a toothpick. Only use a small amount at a time, adding a little more if you're not yet satisfied with the color. Gel coloring is fairly vibrant with just a little amount, so you don't want to overdo it.



Carefully press down on the bag to remove excess air. Seal tightly.



Shake or knead the color throughout the bag. Ensure that all of the salt is evenly colored.



Done. Given that this is gel, the colored salt should be ready to use immediately.

If not using it straight away, you can leave it stored in the sealed bag.

Repeat the process for as many colors as desired.







Coloring Salt with Chalk.



Choose a chalk color that you wish to use. Chalks come in a range of pastel and bright colors, depending on where you buy them from. Check art, craft or upmarket toy stores for a wider variety than you might find in traditional stationery or dollar stores.



Cover the workspace with a large sheet of paper.



Pour the salt onto the paper. The amount of salt depends on the amount you need.



Place the piece of chalk on its side, on the salt. Roll the chalk back and forth over the salt on the paper. As you do this, the color from the chalk will color the salt. Keep rolling until you're happy with the color.



Using the paper as a funnel, pour the chalk-colored salt into a resealable bag or a storage container.



Done. The colored salt is now ready to use, or you can store it until needed.

Repeat the process for as many colors as desired.



Tips.

A rolling pin can be used to distribute the color for the resealable bag color-distributing methods; ensure that there is no air in the bag and roll it up and down until the salt is evenly colored.

Keep colored salt in an airtight container when not in use. Make sure that the lid is on firmly, to prevent spilling it.

For a bath treat, add some essential oil drops as well as the colorant.

If making a lot of colored salt in varied colors, use clean food containers to free up the usual kitchen containers for your cooking and eating.



Warnings.

While these crafts are non-toxic, they are very messy. As such, they are best either supervised carefully or done by older children and adults.



Things You'll Need.

Salt (sea salt, rock salt, table salt, Epsom salts, etc. are all fine to use).

Container for holding salt or a resealable bag.

Colorant.

Stirring implement (such as a spoon, a skewer, a chopstick, etc.).

Storage container (if relevant).

November 17, 2019

how to melt glue sticks

How to Melt Glue Sticks.

Glue sticks can be melted down for a number of applications. Whether used in crafts, manufacturing, packaging, fashion, or in any other creative function, glue sticks are a cheap and easy to come by product. All-purpose or school glue sticks and hot glue gun sticks can both be melted in the microwave, and hot glue gun sticks can, of course, be melted in a glue gun. If handled carefully and done properly, the processes are extremely quick and can help you adhere all kinds of surfaces to one another.







Microwaving Glue Sticks







Remove the glue sticks from their original packaging. All-purpose or school glue sticks can be unscrewed and pulled or broken off from their plastic casings. Hot glue gun sticks simply need to be removed from any packaging or wrappers.

Make sure there are no plastics or other wrappings in or on the glue you want to melt. Most wrappings and plastics are not intended to be melted and can be unsafe to do so.

If your glue stick has a plastic piece through the center, carefully cut the glue away from the plastic using a knife.



Put the stick(s) into a microwave-safe dish. Since the glue will be very messy and hard to clean, use a single-use paper bowl. If you are dedicating the dish to the craft of melting glue sticks, a ceramic or glass mug or bowl will also work.

Be sure the glue sticks are fully inside of the dish. If they overhang the mug or bowl, they will melt outside of the dish.

Start with smaller quantities to test how long your particular glue takes to melt.



Microwave the glue on full power in 20-second intervals. Depending on your microwave and amount of glue, you should at least be able to partially melt the sticks. If there are still solids, microwave the glue for an additional 20 seconds after stirring it with a craft stick or plastic spoon.

Do not leave the microwave unattended. If something goes wrong, you should be there to stop the microwave.

Do not heat the sticks for extended periods of time. It may look like nothing is wrong while it heats, but overheating the glue can create fumes that are unsafe.



Remove the glue from the microwave carefully. You should use it immediately, but be careful as the glue will be quite hot. Depending on how long it was heated, the dish can be hot as well.

Use the glue fresh out of the microwave so it will be easy to apply.

If the glue re-hardens, simply microwave it for another 20 seconds.







Melting Glue Sticks with a Glue Gun





Obtain a glue gun at least as big as the glue sticks. Only use hot glue sticks intended for glue guns—not all-purpose or school glue sticks. If the sticks won’t fit into the glue gun, you cannot melt them. If the sticks are too small, you will just have to use your hand to feed them through.

Make sure your glue sticks are meant for a glue gun. You should not use other types of glue sticks because they can damage your glue gun.



Plug in the glue gun over cardboard or newspaper. As the tip of the gun heats, the gun may start to drip as it melts. By putting a piece of cardboard or newspaper underneath, you can protect your working surface.

Always follow the instructions specific to your glue gun regarding electricity and timing.

Do not leave a glue gun unattended. They can tip over or otherwise cause severe burns if you are not careful.



Squeeze the trigger of the glue gun to feed the sticks. If the sticks match the size of the glue gun, the trigger will allow the stick to press and feed through the heated tip. The glue will then melt and drip out wherever you point the gun.

Do not touch the metal tip of the gun or the melting glue. They will both be extremely hot.

If the glue is not feeding through, it may either be too large of a stick or may still be heating up.

If your glue stick is smaller than the glue gun, you will have to push from the back end of the stick to feed it through.

Use gloves to protect your hands from the heated materials.



Insert another stick once the first no longer feeds through. If the gun or your fingers can no longer safely feed the first stick through the rear of the glue gun, use another glue stick to press it through. It will then be caught by the plastic feeding mechanism and continue melting.





Warnings.

Do not touch melted glue. It will be extremely hot and adhere to your skin, making the burn worse.

Do not inhale melted glue fumes. Some glues are non-toxic, but not all of them are. Regardless, the fumes can be dangerous, and you may need to wear a respirator while working.

November 13, 2019

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019