Ping pong ball chicks are an easy way to make little chickens for craft or decoration. They're a great idea for spring craft projects, for Easter decorations or just because you love chickens. The children will enjoy making these neat little chicks and it's an affordable toy or craft.
Steps.
1. Paint the ping pong balls yellow. Make sure the entire ball is painted yellow. Hang or rest in an egg carton to dry. They must be completely dry before proceeding with the next steps.
2. Make the beaks.
Cut long diamonds from the orange felt. You'll need one orange diamond one per bird.
Fold in half to create a beak. Keep pinched with your fingers.
Glue in place on the fold line/area on the ping pong ball. The triangle edges will stick forward to form the beak shape.
Repeat for each chick you're making.
3. Create eyes. Draw on eyes with the black Sharpie marker.
You can also create eyes with eye stickers, but handmade ones are fast and easy to do, plus you have plenty of creative leeway to make the eye shapes any way you like (try anime style, for example), and with or without eyelashes too.
Repeat for each chick you're making.
4. Make the wings for the chick.
For each bird being made, cut out two wings from the yellow felt. Cut the wings in a rounded way, not spiky or too textured. Keep the chick looking soft and cute!
Glue the wings in place on the sides of the chick.
Repeat for each chick you're making.
5. Shape legs from the wire.
At the end of each leg, shape the three "toes." You'll need to play around with the balance a little, to be sure that the toes enable the chick to stand.
When finished, glue the legs firmly in place. Allow to dry completely.
Paint the legs completely using orange paint.
Repeat for each chick you're making.
6. Display the finished chicks. Place on a tabletop or in a basket. If used as a toy, do not give to children under 3, as the small parts are a safety hazard.
Tips.
Looks at pictures of chicks online for design or coloring ideas.
If you want to make the chick look more realistic, add a yellow pom pom for a head, using the ping pong as the body.
Warnings.
Neither the project nor the end result are suitable for children under three, due to the small parts.
Use orange pipe cleaners (chenille sticks) in place of wire if you're concerned about children being scratched by the wire.
Wire feet may scratch tabletops and other fine surfaces. If this is going to be a problem, glue the chick to a square piece of fine card and place that on the surfaces instead.
Things You'll Need.
Yellow paint.
Orange paint.
Black Sharpie or other permanent marker brand.
Orange felt.
Yellow felt.
Thin craft wire (or use orange pipe cleaners and skip the orange paint).
Mickey's sweetheart has the fashion sense to wear a bow in her ears, but Minnie mouse has very similar ears to those of her beau. In some special costumes, Minnie has also been known to wear a crown, a Santa hat, and other seasonal accents between her ears. The ears are always black, of course, and the bow usually red with white polka-dots, but you can choose your favorite patterns and colors to make the bow you place between your Minnie Mouse ears.
Part 1 Making the Ears.
1. Gather the material for making your mouse ears. You will need black felt to give your mouse ears color and texture. A cardboard core will give your fabric rigidity and form. If you don't have any cardboard, you might be able to layer several pieces of rigid construction paper together with glue as a substitute. The material you use for the ears should be stiff enough to keep it from flopping around loosely once attached to the headband and if you don’t have felt, you can paint or color the cardboard black.
Black felt, Cardboard, Rigid construction paper (optional), Household glue, Plain paper, Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long).
You should be able to purchase everything you need for this project at your local fabric or craft store.
2. Purchase a headband and tools, if necessary. The headband can be any color, but it should be at least ½" (1.27 cm) thick. You will eventually attach your mouse ears to the headband, so thicker headbands might give your mouse ears greater stability. Including a head band, you should also purchase the following tools.
3. Make two identical paper circle templates. You should trace two circles on your paper with a pencil or your chalk. Each circle should be between 3” and 5” (7.6 and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of the circle. These templates will be used to assist you in outlining the dimensions of your mouse ears on both fabric and cardboard.
The tabs will on the bottom of your circles will be used to secure the ears and the headband together.
You might be able to use the base of a bowl to help you in drawing identical circles for both of your templates.
4. Outline your felt circles onto your felt. Place your paper template on top of the felt and trace the circle with chalk onto it. You could use a piece of tailor’s chalk, or even regular chalk in a pinch. This way, you can wipe any leftover chalk away with a damp cloth.
Make four felt circles for every pair of ears you make. You will need to glue felt to the front and back of your cardboard core to make your mouse ears uniformly black.
5. Cut your felt circles. Take your scissors and follow the chalk outlines you've drawn to cut free your felt circles free from the fabric.You can add some jazzy flair to your mouse ears by using zig-zaggy pinking shears.
Pinking shears will add a cute border to your fabric and prevent your fabric from becoming frayed.
6. Trace cardboard circles for your mouse ears. These cardboard circles will form the core of your mouse ears, making it possible for them stand up straight, just like Minnie's! Use your pencil or a piece of chalk to trace the circle template onto the cardboard.
You will need two cardboard circles for every pair of ears you make.
7. Cut out your cardboard circles. Using your scissors, follow the chalk or pencil outline you drew with your templates onto the cardboard. Be sure you don't cut off your tabs! These will be necessary to connect your mouse ears to the headband.
You may need to touch up your cardboard and felt circles/tabs to make them as close to identical as possible.
Compare and trim your felt and cardboard circles by holding the cardboard and felt pieces together in a stack. Then you can trim down any irregularities.
8. Glue the felt to the cardboard. Household glue should be sufficient to attach a piece of felt to the front and back of each cardboard circle/ear. Drizzle glue back and forth along the cardboard and press your felt into place. Press the felt to the glue firmly for five to ten minutes help it set.
To create the best bond between your glue and the felt, you may want to allow your glue to rest for 30 minutes to an hour.
Part 2 Attaching the Ears to the Headband.
1. Spread hot glue along the tabs of the ears. Regular household glue won’t hold up to wear and tear as well as hot glue. The special glue used in hot glue guns, however, is much more durable. It will create a firm bond between ear and headband.
You'll have to move quick after you apply your hot glue. The glue will dry quickly soon after application.
Hot glue fresh from the gun will be very hot. Be careful not to burn yourself.
2. Hot glue the tabs of your circles to the underside of the headband. Your circles should be at least 4” (10 cm) apart so that you have room for the bow that will go between the ears. You may want to mark your headband with your chalk where you'll be attaching the ears to prevent yourself from gluing them into the wrong place.
If your headband is flexible or will permit the use of staples, you could also use a hardy stapler to connect the tabs of your mouse ears to your headband.
3. Allow the glue to dry thoroughly. Playing with your mouse ears before the glue has completely dried could cause your mouse ears to come free of the headband. To ensure you don't have to re-glue any of your pieces together, you should allow your glue to firm for 30 minutes to an hour.
4. Style the ears into position. Your mouse ears might not stand straight up like Minnie Mouse's at first. To encourage your mouse ears to hold this position, fold both up and forward. The glued tabs will keep the ears in place.
Part 3 Creating the Bow.
1. Measure and cut a 10” (25 cm) length of ribbon or fabric. You can use either ribbon or fabric for your bow, although ribbon will likely be a little shinier and look more like the bow Minnie wears. In either case, it should be 5” to 8” (12.7 to 20.3 cm) wide. You will eventually gather this fabric around its middle, which will cause the sides to fan out. This will give your bow its shape.
Thicker cuts of fabric will create more bunching when you gather this piece around its middle, which will give your bow a fuller appearance.
2. Measure and cut a 3” (7.6 cm) gathering string. This is the piece you will use to gather the fabric around the middle of your 10" (25 cm) length of ribbon. You should use a similar kind of fabric to your 10" (25 cm) ribbon, but you could also add some pop to your design by using a contrasting color fabric.
For example, if you are using Minnie's traditional bow color, red with white polka-dots, you might choose a bold blue for your gathering string.
3. Lay the 10" (25 cm) piece of ribbon on a flat surface. Put the print side face down. You're going to want to glue your gathering string along the back of your bow, which will be the same as the opposite side of the pattern.
4. Fold the long ends your 10" (25 cm) ribbon toward its center. You'll want each side to overlap slightly at the center of your 10" (25 cm) length of ribbon. Fold one end at a time so that there is enough overlap to glue these side where the meet at the center of the ribbon.
5. Glue the folded inward ends at the overlap. It should only take a dab or two of hot glue or fabric glue to join the ends together firmly. Press the fabric firmly to create a stronger bond between the fabric and glue.
You should follow the directions on your glue to achieve the best bond. Some glues will set and cure faster than others. Generally, you should hold the glue firmly for one to five minutes for best results.
6. Arrange your ribbon into a bow shape. Use one hand to pinch your ribbon together toward its centermost point from the top and bottom edges. This will be easiest to do if you are working with a ribbon that is at least 5” (12.7 cm) wide.
Pinching your ribbon together tightly will cause the outside edges to flare out more dramatically.
7. Loosely wrap your gathering string around your bunched ribbon. The 3” (7.6 cm) piece of ribbon will hold the fabric of your bow in its flared position. Wind it around several times and then remove your fingers where you were pinching the bow in the middle.
Hold the ribbon with your free hand to make sure it doesn't come unwound or loose.
Wind the remaining length of your ribbon around the center tightly.
8. Glue the gathering string in place. Lift one end of the small piece of ribbon and apply a dab of hot glue or fabric glue. If using hot glue, you should be careful not to burn yourself by pressing on the fabric immediately after glue application.
To apply pressure to make the best seal between your hot glue and fabric, you might use a tool to prevent getting burned, like a paperweight, gloved hand, or tweezers.
Fabric glue and other cold glues should be held together firmly to encourage a strong bond. Press the glued piece of ribbon together. Hold this position for about 30 seconds to a minute.
Part 4 Attaching the Bow to the Headband.
1. Slip a pipe cleaner through a fold in your bow. The bunchings of your bow fabric should have created folds through which you can thread your pipe cleaner so that it passes under your glued gathering string.
If you find it difficult to feed your pipe cleaner through a fold and under your gathering string, you can always use glue to attach the pipe cleaner along the back of your bow.
A dab of hot glue onto the back of your gathering string should be enough to hold your pipe cleaner in place.
2. Cross one end of the piper cleaner over the other. Orient your pipe cleaner so it is equal length on both sides of your gathering string. Now cross the sides of your pipe cleaner at the midpoint over the front of your gathering string and add a twist.
This will prevent the pipe cleaner from slipping out of the bow while adding stability to the bow in general.
Experiment with different colored pipe cleaners to personalize your Minnie Mouse ears!
3. Secure your bow with the loose ends of the pipe cleaner. Center the bow between the ears. Then you're going to wrap each end of the pipe cleaner around opposite ends of your headband. Twine each side of the pipe cleaner down opposite ends of the headband until you go no further.
The ends of pipe cleaner can be pointy. To prevent the wearer from getting poked, you may want to turn these inward on your headband. The ends can also be taped to the headband as an extra precaution.
By attaching your bow to your mouse ears with a pipe cleaner, you'll be able to swap out different bows without having to make a new pair of mouse ears.
Twist ties can be used to reinforce your pipe cleaners if you find the pipe cleaner windings are not holding the bow in place well enough.
4. Add finishing touches and show off your mouse ears. Minnie, being a stylish mouse, would probably go ga-ga over some rhinestones, glitter, feathers, or other accents you might add to your mouse ears. Most of these can be attached with a small dab of hot glue. Once you've finished adding your finishing touches, you should show off your mouse ears to all your friends.
Tips.
Use a black felt tip marker to color white pipe cleaners if you don't want the white to show too much.
Warnings.
Hot glue emerges from the gun applicator at a very high temperature. Whenever using hot glue, you should follow the instructions that came with your glue gun and take care.
Things You’ll Need.
Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long), Black felt, Black felt tip marker, black crayon or paint (optional), Cardboard.
Chalk, Foam (optional), Headband, Hot glue gun, Household glue, Pipe cleaner, Plain paper, Scissors, Stiff construction paper (optional).
Whether you're looking to make a cute Easter decoration or just a fun craft to do with your kids, a pom pom sheep fits the bill. It's easy to make your own pom pom with just some yarn and a piece of cardboard, so you can customize your sheep to look exactly the way you want. Add a simple head made of craft foam and googly eyes and pipe cleaner legs, and you have an adorable farm animal to decorate your home.
Part 1 Creating the Pom Pom.
1. Cut out a piece of cardboard. To make the pom pom for the sheep, you’ll need a cardboard rectangle to wrap your yarn around. For a large sheep, cut a piece that’s 3-inches by 5-inches (8-cm by 13-cm). For small sheep, cut a piece that’s 3-inches by 2-inches (8-cm by 5-cm).
You can adjust the size of the cardboard to customize the size of sheep if you prefer.
After you cut the cardboard, it’s a good idea to wrap it in packing tape. That will allow the yarn to slide off it more easily when you’re finished making the pom pom.
2. Wrap the yarn around the cardboard. For the pom pom, you need fluffy white, cream, brown, or black yarn. Instead of cutting the yarn to a certain length, remove an end from the ball or skein and begin wrapping it around the cardboard widthwise. For a large sheep, wrap the yarn around the cardboard 120 times. For a small sheep, wrap the yarn around the cardboard 75 to 80 times.
Use one hand to hold the end of the yarn in place as you wrap it side by side in a single layer on the cardboard. Once you’ve covered the cardboard, start creating a second layer over the first. Continue working until you’ve wrapped the yarn around the suggested number of times.
While white, cream, brown, or black yarn offers the most realistic sheep look, you can substitute your favorite color yarn, such as pink or blue.
3. Bend the cardboard to slide off the yarn. When you’ve completely wrapped the cardboard with the yarn, use your fingers to bend the cardboard slightly widthwise to contract it. That makes it easier to carefully slide the yarn from the card.
Be gentle as you pull the yarn from the cardboard and make sure to hold it together so it stays together.
4. Tie twine around the middle of the yarn bundle. Once you’ve freed the yarn from the cardboard, use a piece of twine to secure the bundle in the middle. Tie the yarn as tightly as you can to ensure that it stays together.
If you don’t have twine, you can substitute a piece of yarn. However, twine is stronger than yarn so it usually does a better job of holding the pom pom together.
5. Cut the loops of the yarn to form the pom pom. When the yarn is securely tied with the twine, use a pair of scissors to cut the loops. This will create the pom pom shape for your sheep.
After you cut the loops, you may need to trim some pieces to get the look that you want for your sheep.
Part 2 Making the Head and Legs.
1. Draw the shape of the sheep’s head on craft foam and cut it out. To make the sheep’s face, you’ll need a piece of black craft foam. Use a pencil or pen to draw the shape of the sheep’s head, complete with ears, on the foam as a guide. Next, carefully cut the head out with a pair of scissors.
If you’re not comfortable drawing the sheep’s head freehand, you can find templates online at various craft websites, such as Dad Can Do .
The proper size for sheep’s head will depend on how large your pom pom is. It should fit on one end of the pom pom.
If you used dark yarn for the pom pom, use white craft foam for the head.
You can use a craft knife to cut out the head if you prefer.
2. Stick googly eyes on the head. Once you’ve cut out the sheep’s head, select two googly eyes that will fit on it side by side. Apply your favorite type of craft glue to the back of the eyes, and press them onto the foam head.
You can find googly eyes in a variety of sizes at the craft store.
Make sure to let the glue dry for at least 5 minutes, so you can be sure the eyes won’t fall off when you begin to assemble the sheep.
3. Fold two black pipe cleaners in half. For the sheep’s legs, you’ll need two black pipe cleaners that are approximately 4- to 5-inches (10- to 13-cm) long. Bend the pipe cleaner in half to create a “V” shape.
Part 3 Assembling the Sheep.
1. Glue the head to the front of the sheep. Add a dab of glue to the back of the sheep’s head that you’ve made. Carefully press it onto your pom pom, and hold it for 30 to 60 seconds to ensure that it is secure.
You can use any type of glue to secure that works on fabric to secure the head to the pom pom. However, you may have an easier time if you use a hot glue gun.
2. Thread the pipe cleaner front legs through the pom pom. Take one of the bent black pipe cleaners and push it through the pom pom on one side near the front. Make sure that the pipe cleaner is threaded through the yarn pom pom so it is secure.
Some thread may come loose when you thread the pipe cleaner through. You can trim any errant strands.
3. Press the second pipe cleaner through the back of the pom pom. After you’ve secured the pipe cleaner for the front legs, push the second one through the pom pom near the back. Pull it through to the other side to create the second set of legs.
Take care with your placement of the second pipe cleaner. You want to ensure that it’s far enough back from the first to provide proper balance for the sheep to stand.
4. Adjust the pipe cleaners to allow the sheep to stand. Once both pipe cleaners are threaded through the pom pom, bend the four ends to create feet that help the sheep stand. You may need to adjust the length of the pipe cleaners on each side to ensure that the sheep is balanced properly.
Tips.
You can use the same technique to create a create a pom pom bunny and/or chick to serve as Easter decorations.
This is a kid-friendly activity, but be sure to supervise their use of scissors and the hot glue gun.
Things You’ll Need.
Cardboard.
A ball or skein of fluffy yarn in white, cream, black, or brown.
