how to make a polymer clay penguin

How to Make a Polymer Clay Penguin.

There's no denying that penguins are among the cutest critters to populate this planet. Unfortunately, having a real one might be out of the question for most people. Luckily, it is possible to make a miniature penguin out of polymer clay. You can even insert a small eyehook or eye pin to turn it into a charm so that you can take it wherever you go!

Method 1 Making a Basic Penguin.

1. Make the body of the penguin. Knead some black clay until it turns soft. Roll it into an oval, about twice the height of your thumbnail. Flatten one of the oval's pointy ends against your work surface until it can stand on its own.

2. Make the head of the penguin. Roll some black clay into a small ball, about the same size as your thumbnail, or half the height of the body.

3. Attach the head to the body. Gently press the head on top of the penguin's body. Don't worry if the head squishes a little. If you'd like, you can use a clay sculpting tool to smooth the seam between the head and the body.

4. Roll some white clay out into a thin sheet. Clean your hands first, then knead some white clay until it turns soft. Roll the clay into a thin sheet using an acrylic rolling pin or tube. You can find acrylic rolling pins in the polymer clay aisle of an arts and crafts store.

If you can't find any acrylic rolling pins, you can use a regular rolling pin, a fat marker, or any other smooth cylinder.

5. Cut an oval and a heart out of the white clay. The oval will make the belly and the heart will make the face. Both need to be a little smaller than the body and head respectively. You can use mini polymer clay cutters for this; they look like miniature cookie cutters. You can also cut the shapes freehand with a craft blade instead.

6. Stick the white shapes onto the body and head. Gently press the white heart onto the head, and the white oval onto the body. Make sure that the bottom of the heart and the top of the oval go into the crease between the head and body.

7. Roll some black clay into a thick sheet. Clean your hands again, and knead some more black clay until it turns soft. Roll the clay into a thick, black sheet. Plan on making it twice as thick as the white sheet. This will eventually make the wings.

8. Cut two wings out of the sheet. Start by cutting an oval out of the clay, a little bit shorter than the body. Cut the oval in half, lengthwise, so that you end up with two semi-ovals. You can use a craft blade to do this.

9. Add the wings onto the penguin's body. Gently press the wings down onto the body to either side of the white belly. The flat edges of the wings should be facing the white belly. The tips of the wings should be nestled into the crease between the head and the body.

Don't worry if the wings overlap the white belly a little.

Consider flipping the bottom of the wings outwards for a cute touch.

10. Make a beak. Clean your hands, and knead some orange clay. Roll the clay into a tiny teardrop or cone.

11. Attach the beak. Press the bottom of the teardrop/cone into the middle of the penguin's face.[4] Use a craft blade to cut the beak open after you attach it, if desired. This will give your penguin an open mouth instead of a closed one.

12. Make the feet. Roll a small ball out of orange clay. Cut the ball in half using a craft blade. Cut two notches into each dome to make the feet.

13. Attach the feet. Turn the penguin upside down. Pinch the back of both feet, then press them into the base of the body. Make sure that the front of the feet (the notched parts) stick out from under the body. Place the penguin right-side-up against the table, and adjust the feet, if needed.

14. Consider inserting an eyehook. If you wish to turn this penguin into a charm, press a jewelry eyehook through the top of the head and into the body. If the hook is very long, trim it down first using a pair of wire cutters.

15. Bake the penguin according to the manufacturer's baking times and temperatures. Turn on your oven, and let it reach the recommended temperature, usually between 215 to 325°F (102 to 163°C). Place the penguin on a foil-lined baking sheet, and bake it for the recommended time, typically 15 to 20 minutes.

Each company will be a little different, so you will need to read the label on the clay's wrapper.

If your penguin has a lot of fingerprints on it, gently brush it with a soft-bristled paintbrush before you bake it.

16. Allow the penguin to cool before adding the eyes. Use a black permanent marker to draw two dots on the penguin's face, right above the beak. Position them in the loops of the "heart". You can also use a thin brush and acrylic paint.

17. Glaze the penguin, if desired. If you wish to make the penguin shiny, get some glaze meant for polymer clay. Paint the penguin with the glaze, then let the glaze dry.[9] Refer to the label on the bottle, as each brand's drying times will vary.

Method 2 Making a Penguin Charm.

1. Shape the body. Knead some polymer clay until it softens, then roll it into an oval. Flatten the oval with a glass so that you get a disk shape. Cut off one of the pointy ends of the oval, so that the penguin can stand upright.

Penguins are typically black, but since you are making a cute penguin, you can make him or her any color you want! Pink, baby blue, or light purple would be especially cute!

2. Roll some white clay into a thin sheet. Clean your hands first to avoid transferring color, then knead some white clay until it softens. Roll it into a thin sheet using an acrylic rolling pin. You can find it in the polymer clay aisle of an arts and crafts store.

If you can't find an acrylic rolling pin, you can use another smooth cylinder, such as a fat marker or a rolling pin.

3. Cut an "m" shape out of the sheet. This will make the body and face of your penguin. It needs to be the width as body, but a little shorter. Use a craft blade to cut the shape out.

4. Press the white "m" onto body. Be sure to match up the base of the "m" with the base of the body. You will have a slight gap between the top of the "m" and the top of the body.

5. Make a beak. Clean your hands, then knead some orange clay until it turns soft. Press it into a thin disk, then cut a small triangle out of it using a craft blade.

6. Attach the beak. Press the triangle into the middle of the white part on the body. Make sure that the pointed tip of the triangle is pointing downward.

7. Add some eyes. Roll two small balls out of black clay. Press each ball onto the penguin to either side of the beak. They should just barely be touching the upper corners of the bead.

If you don't have any black clay, you can skip this step, and paint the eyes on instead after you are done baking.

8. Insert an eyehook into the top of the penguin. Measure the eyehook against the penguin first. If it is too long, trim it down with a pair of wire cutters. Push the eyehook down through the top of the penguin.

9. Bake the penguin. Preheat your oven to the temperature specified by the manufacturer, typically between 215 to 325°F (102 to 163°C). Place your penguin onto a foil-liked baking sheet. Bake the penguin for the time recommended by the manufacturer, typically 15 to 20 minutes.

Each brand of clay will have different baking times and temperatures. Read the label on the clay's wrapper carefully.

If the eyehook is still look, put a little superglue around the seam.

10. Paint some feet onto the penguin once it cools. After the penguin is done baking, take it out of the oven and let it cool. Use a thin paintbrush and some orange, acrylic paint to add two small v's at the bottom of the penguin. If you don't have any paint at home, you can use an orange permanent marker instead.

11. Glaze the penguin, if desired. Get some glaze meant for polymer clay. Thread some string through the eyehook and tie it into a loop. Dip the penguin into the glaze, then lift it out. Let the excess glaze drip off, then hang the penguin by the loop so that it can dry.

Place a sheet of scrap paper under the penguin as it is drying to catch any excess glaze.

Tips.

You can bake your penguin in a convection over, regular oven, or toaster oven.

Most polymer clays bake at 215 to 325°F (102 to 163°C).

If the clay becomes too soft and squishy, set it aside until it becomes firmer. You can also put it into the fridge for a few minutes instead.

Clean your hands with baby wipes between colors. This keeps your fingers from accidentally transferring color between the clay pieces.

Gently brush the clay with a soft-bristled paintbrush after you are done sculpting, but before baking. This will help remove fingerprints.

You can make your penguin any color your want. Consider switching out the black for light blue, pink, or light purple.

If the clay is too hard to work with, knead it between your hands for a few minutes first.

If the clay is still too hard, add some clay softener into it. It is usually sold alongside the rest of the polymer clay.

Avoid mixing different polymer clay brands, as they tend to require different baking temperatures.

Glaze the penguin when you are done. You can apply the glaze with a paintbrush, and let it dry. If you added an eyehook, use the pin to dip the penguin into the glaze.



Warnings.

Do not bake your penguin in the microwave.



Things You'll Need

Making a Basic Penguin.

Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin, Oven.

Baking sheet, Aluminum foil, Black permanent marker or acrylic paint, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).



Making a Penguin Charm.

Polymer clay, any color (for body), Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin.

Oven, Baking sheet, Aluminum foil, Orange acrylic paint, Thin paintbrush, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).

Januari 25, 2020

how to make an art kit

How to Make an Art Kit.

As you begin studying art or creating art of your own, you may find it helpful to start with a selection of basic tools and equipment. Your art kit is your own, so take the ones described here as a guide to build upon or modify for your own style.







Method 1. Making an Adult Kit



1. Decide what you will put everything in. Choose something easy to carry around with you, especially if you want to do art on location or you are taking classes. You could use anything from a shoe box to an old briefcase.

Choose an ample container. You are likely to acquire more art supplies as you continue.

Plan to protect the supplies that are sensitive. A hard sided pencil case or simply a tin or shoe box can keep pencils and other delicate items from breaking.

Give some thought to how you will carry paints, brushes, and whatever you will use to clean them, especially if you're painting away from home.



2. Find or buy some basic equipment. Here's a list of what you might need with a rough estimated price. You will not need all of these items; just select what you would like to use and then build up your kit as you go along. You can always add to it later.

Pencil Set.

Pens.

Sketchbook.

Oil Pastels.

Dry Pastels.

Acrylic paint set.

Paint Brushes.

Water Soluble Pencils.

Colouring Pencils.

Glue.

Scalpel.

Metal Ruler.

Pencil sharpener. A small, handheld one will travel well.

Clay.







Method 2. Making a Child's Kit



1. A child's kit is extremely easy to make, since children are naturally creative and they will use just about anything. Here's a child's list to get started.

Colouring Book.

Safety Scissors.

Colouring Pencils.

Pipe cleaners and other items like that.

Non-toxic glue.

Sketchbook.

Play-doh.

Markers.



2. Include a cheap plastic tablecloth or oilcloth in a child's kit and explain to Mom and Dad that it's to go underneath anything messy: paint, clay, glue, etc. Plastic tablecloths easily cover the whole table and they come large enough for several friends or even the whole scout troop to gather around.



3. With this child's kit it's really up to you. Use anything age-appropriate that they can't hurt themselves with.



Tips.

If you want to skip all the hassle of searching through shops you can find lots of different starter kits for children and adults ranging from £5 to £100.

Leave yourself plenty of room to expand. Art supplies have a way of growing.

If your kit is for a child make sure you buy non-toxic products and safety scissors.

Art kits make great gifts. Try to learn a bit about the artist who will receive your kit so that you do inspire and don't duplicate. For gifts, interesting materials (e.g. fabric, paper, wood) might be a good addition, especially if your artist tends toward mixed media or crafts.

Remember that art is more than drawing and painting. If you find yourself drawn toward other activities or media, make the most of it. There's no reason why an extraordinary work of art can't be made of fabric, concrete, plastic, metal, natural materials, found materials, or anything else that will fit the bill. If you're already skilled at welding, sewing, woodworking or the like, you may already have many of the supplies you need.

Did you give an art kit last year? If it was well received, expand on it this year. New materials and supplies can afford an artist the opportunity to expand and can sometimes supply new inspiration.

Colouring is not an especially artistic endeavour. If the child who will receive this art kit happens to enjoy it, go ahead. If not, encourage creativity and innovation by giving a blank sketch book, or look for the "Anti Coloring Book" series.

Start simple, especially if you are making this kit for yourself. If you want to get into drawing, start with just an ordinary pencil and paper, then as you find yourself improving, invest in some color pencils and a sketch book or a simple prepared kit, obtaining supplies as you need them. Remember: gear doesn't make the artist; practice does. This approach will help you to find your artistic style while saving a bit of money and avoiding the clutter of materials you don't use.

Image titled Wild Rose Artists' Supplies and Custom Framing 7478Experiment. If a particular medium, tool, or other item interests you, give it a try. Don't give up on your first attempt, either. Give yourself a chance to get familiar with a new addition before deciding whether to keep at it.



Warnings.

Always supervise young children when they use anything like glue or scissors.



Things You'll Need.

Art supplies.

Box or bag.

Money.

November 21, 2019

how to paint wood crafts

How to Paint Wood Crafts.

Many arts and craft stores sell blank wooden pieces that you can paint. While you can always paint them right away, there are a few steps that you can take to ensure a neater, longer-lasting finish. Sanding the piece first will get rid of any ridges, while priming it will help the paint stick on better. Adding a coat of sealer will protect all your hard work, and help it last for years to come.





Prepping the Wood.



Sand the surface of the object with 140 to 180-grit sandpaper. You can do this with a sanding sponge or with a piece of sandpaper; a sanding sponge will work the best on curved surfaces, however. Also, make sure that you are sanding with the grain of the wood, not across it.

Some wooden pieces from craft stores come pre-sanded. If the surface area is completely smooth, skip this step.



Wipe the dust away with a tack cloth. A tack cloth is a special, sticky cloth intended for this purpose. You may find it alongside the sandpaper in the craft store or in the hardware store. If you can't find a tack cloth anywhere, try a damp cloth instead.

It would be a good idea to do this, even if you didn't sand your piece; items bought from stores are sometimes dusty, which can prevent the primer and paint from sticking.



Apply a coat of primer. You can use the brush-on kind or the spray-on kind. This will seal the wood surface, and help it take the paint better. It will also help the paint show up better, especially if you are using a light color.

Prime the front and sides first, let them dry, then prime the back.

Image titled Paint Wood Crafts Step 4



Allow the primer to dry before moving on. For an even smoother finish, you can sand the first coat of primer, wipe it clean, then apply more primer over it. Do this a few more times until there no ridges remain.







Painting and Sealing the Wood.



Pour a dollop of acrylic paint onto a palette. Choose a color for the background, then pour out a small amount onto a palette. Acrylic paint dries quickly, so don't pour out your other colors just yet. You can use the cheap, craft-grade acrylic paint that comes in bottles, or you can use the more-expensive artist's grade that comes in tubes. If you are using the artist's grade, dilute it with a few drops of water until it has the consistency of cream first.

You can use small dishes, plastic lids, and paper plates as palettes.



Apply a coat of paint over your piece. Use a foam brush or a wide, flat paintbrush to apply the paint. Let the paint dry, then apply a second coat, if needed. Let this second coat dry as well. Do the front and sides first, let them dry to the touch, then do the back.

Look for brushes made from taklon, katakana, or sable. Avoid camel hair brushes or stiff, bristle brushes.

Don't overload the brush with paint. The paint should come no more than halfway up the bristles.



Let the paint dry, then add a second coat, if needed. How long this takes depends on the brand that you are using. Most types of acrylic paint will dry in about 20 minutes, however. If the paint is too thin, add another coat of paint, and let it dry as well.

Take this time to clean your brush(s) with water. Do not let the paint dry on the brushes.



Add your designs and details. You can use stencils or trace designs onto the wooden piece. You can also free-hand the designs as well. Apply the base color first, let it dry, then add the details. For example, if you wanted to paint a smiley face, you'd paint the yellow circle first, let it dry, then add the smile and eyes.

Dip the brush in water often to keep the paint wet, even if you are using one color.

If you are working with multiple colors, keep a cup of water nearby. Rinse the brush with water before switching to a new color.



Let the paint dry completely. Refer to the label on you tube of paint for exact drying times. Just because something feels dry to the touch does not mean that it is ready to handle or take on sealer. Every brand will be different, but you can expect this to take about 24 hours.



Apply 1 to 2 coats of sealer. Sealers come in many different finishes, including matte, glossy, and satin; choose one that you like the best. Apply a thin coat of spray-on or brush-on sealer, then let it dry. Apply a second coat, if needed, and let that one dry too.

If you are using the brush-on kind, apply it using a wide, foam brush.

If you are using a spray-on varnish, be sure to work in a well-ventilated area.







Trying Other Techniques.



Skip the priming if you want to paint a design over bare wood. Instead, consider painting over the entire piece using a wood stain or a sealer. Wait for the stain or sealer to dry, then paint your designs onto the wood. Be sure to seal everything after the paint dries.



Add designs using stencils. Buy or make a stencil, then place it over the wood. Paint over the stencil using decoupage glue; this will seal the wood and prevent the paint from leaking under the stencil. Let the decoupage dry, then paint over the stencil. Peel the stencil away while the paint is still damp. Seal the wood using a spray-on or brush-on sealer.

You can make stencils using contact paper or self-adhesive vinyl.

You can use this method over bare, unsealed wood.



Use graphite paper to trace designs, then fill them in. Place a sheet of graphite paper over your piece of wood, graphite-side-down. Draw your design, then lift the paper away. Go over the outline using a thin, painted brush, then fill the design in using a flat brush. This method works best over painted wood. You can do it over bare wood, but the paint may not stick as well.

If you don't know how to draw, print the design out on tracing paper first, then place the tracing paper on top of the graphite paper.

If you are working over a dark-colored surface, make some chalk graphite paper instead: cover the back of a piece of paper with chalk, place it chalk-side-down onto the wood, then trace your design.



Create a tinted stain to show off the wood grain. Apply a thin layer of acrylic paint using a dry paintbrush. Dip a wet cloth in a small amount of paint, then rub it over the wood. This will help blend strokes together without covering up the wood grain.

The cloth should be wet, but not dripping.

Alternatively, you can paint over the entire piece using watered down acrylics or watercolor paints.



Make a DIY chalkboard. Paint the surface of the wood with 2 to 3 coats of chalkboard paint. Let the paint dry, then paint designs using normal paint onto it, if desired. Allow the chalkboard paint dry and cure completely. Cover the board with chalk, then wipe the chalk off.

Keep the designs on the edges of the wooden piece so that you can use the surface as a chalkboard.

You do not need to prime a DIY chalkboard, but sanding it would not be a bad idea.





Tips.

You can spray paint the wood first, then paint more intricate designs using acrylic paint.

Remember to prime, paint, and seal the bottom of your piece as well!

It is better to apply several thin coats of paint, primer, and sealer rather than one or two thick coats.

You get what you pay for when it comes to brushes. For the smoothest finish, consider investing in a high-quality brush.

Let the paint and sealer cure for 3 weeks before handling the piece. If you must handle the piece sooner, do so gently and with great care.

Choose your paint colors carefully. Acrylic paint typically dries 1 to 2 shades darker.

Use small, round, pointy brushes for precision and details, and wide, flat brushes for curves and backgrounds.

You don't absolutely have to prime the wood, but it is highly recommended. You can skip this step for a simple, kid's craft project, however.



Warnings.

Wear a dust mask over your face while sanding the wood for added protection.

Always using spray paint or spray-able primers/sealers outside or in a well-ventilated area.



Things You'll.

Wooden object (ie: frame, box, letter, toy car, etc).

140 to 180-grit sandpaper

Primer.

Acrylic paint.

Paintbrushes.

Sealer.

November 10, 2019

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019

learn how to rubber stamp on stretch canvas

learn how to rubber stamp on stretch canvas

If you are looking for different surfaces to stamp onto then how about trying artist's canvases. These are great for making decor for the home and canvas blocks are all the rage right now. This is a project for stampers happy to experiment with different techniques to create interesting results.



What Are Artist's Canvases?

Artist's canvases are typically pieces of linen or cotton canvas on which artists paint. There are two types which are commonly used, canvas board or panels, where the canvas is stretched over a piece of board. This gives a firm flat surface for stamping.



The other type is stretched canvas. These are pieces of canvas that are stretched over a wooden frame which creates a taut surface. Canvases of either type are available in a wide range of sizes, from tiny canvases through to canvases that take up an entire wall. There are a variety of different qualities of canvas available and art stores will have the biggest range on offer.



About the Surface for Stamping

The canvas surface is woven and as such it is more textured than normal cardstock. This is one of the features of the canvas which makes it a little different and interesting to work on. Note that this texture will mean that some detail in a very intricate stamped image may get lost. You will also notice that some canvases are sold as primed, others are not primed. A primed surface means that it has been treated ready for painting. Both surfaces can be stamped on, however, the inks will be absorbed by the surface of the untreated canvas and may need heat sealing on treated canvas. It is best to experiment with both types and see which gives you the results you prefer.



Where to Buy

You will find stretch canvases for sale in artists supply stores. You will also find them in craft stores and even some stationery stores as well as online.



How to Use

While you can stamp onto canvas panels with relative ease, stamping on stretch canvas presents some significant challenges, not least the fact that the canvas surface, while taut, has some movement and therefore it is difficult to stamp onto in the traditional manner. However you can achieve good results by placing the inked stamp, image side up and carefully pressing the canvas, top side down, onto the stamp. Then carefully rub over the back of the canvas to make sure the inked image is transferred from the stamp to the canvas. To use this method, your stamp must be smaller than the recess at the back of the stretch canvas.



Ink for Stamping

Unlike stamping on canvas or fabric which is going to be worn or may need regular laundry care, canvas panels are purely decorative, therefore there is no need to use fabric ink when you stamp on canvas panels. The type of ink you use depends on the results you want to achieve, however, good thick pigment inks are a great choice although they may need sealing with a heat gun. Permanent ink such as Stazon and Ranger Archival inks are also a great choice.



Mistakes

While artist's canvases are more expensive than normal paper or cardstock, you don't need to worry that all is lost if you make a mistake. If you make a mistake, simply get some white acrylic paint and paint over the image. Leave the paint to dry and when it is dry, start again!

Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019