How to Make a Dinosaur Tail

How to Make a Dinosaur Tail.

A dinosaur tail can be used in a Halloween costume or be a new accessory for a dress-up game. Best of all, this fun, brightly-colored tail only takes 1-2 hours to make. If you’re familiar with a sewing machine, you can stitch your dinosaur tail together. For a quicker assembly, you can use hot glue. It only takes a few pieces of fabric and some fiber stuffing to take your child’s imagination to the next level!

Method 1 Creating a No-Sew Dinosaur Tail.
1. Cut a series of triangles into a long strip of fabric. Snip out a line of connected triangles from the strip. The total length of the strip should be 24 inches (61 cm) by 2 inches (5.1 cm). When you’re done, the felt should look like a miniature mountain range. Set this aside for later.
This strip will become the spikes of the dinosaur tail, so feel free to pick a bright, fun color!
When flattened, the fabric will look like a row of diamonds. This will be fixed later on when the spikes are folded and glued together.
Use fabric scissors for a quicker and smoother cut.
2. Trace the edge of a bowl onto the main fabric and cut it out. Flip over a bowl and trace its circumference onto the felt. The diameter of the bowl will be the width of your dinosaur tail, so make sure that it’s wide enough.
3. Cut out 2 strips of fabric for the waist straps and glue them in place. Use fabric scissors to cut 24 inches (61 cm) by 2 inches (5.1 cm) rectangular strips from the tail fabric. Then, fold in the edges lengthwise and glue them into place. Fold the fabric in half again and glue both sides together so the straps are less than 1 inch (2.5 cm) thick.
4. Crease and glue the line of fabric spikes together. Use short lines of hot glue to connect the folded spikes. Instead of looking like a row of diamonds, the felt will now look like a row of triangles.
5. Cut a large, curved triangle out of fabric to make the base of the tail. Measure out a curved triangle along the edge of a folded piece of fabric. You don’t have to use specific measurements, but make sure that the tail will fit around your circular piece.
6. Attach the spikes to the inner seam of the tail with hot glue. Use small lines of hot glue to connect the felt spikes with the outer edge of the tail. Apply glue on both sides of the spikes, as this piece will hold the tail together. Put pressure on the glued areas with your fingertips to secure the spiked tail into place.
Use additional glue at the pointy end of the tail to provide extra support.
Add extra glue as needed to connect the rest of the tail together.
7. Put fiber stuffing into the tail until it’s fully stuffed. Take a bag of fiber filling and stuff the tail completely. Place as much or as little stuffing as you would like inside.
Make sure that the pointy end of the tail is completely filled before continuing to stuff the rest.
8. Glue the waist straps and circular piece to the inside of the tail’s base. Take the waist strips and glue them on opposite ends of one another, using small lines of hot glue. These straps should be perpendicular to the line of spikes. Make sure that the circular base is glued snugly over the waist straps and is covering the end of the tail.
You can tie the waist straps together to secure the tail when your child wears it.

Method 2 Cutting and Sewing a Tail Shape.
1. Fold the fabric in half and mark 12 inches (30 cm) above the crease. Take 1 yard (0.91 m) of fabric and fold it in half horizontally. Use a tape measure (preferably non-mechanical) and mark 12 inches (30 cm) above your starting point on the fold. This indicates the height of your dinosaur tail.
Make sure that your measuring tape expands to at least 3 feet (0.91 m).
2. Make a second mark 24 inches (61 cm) down the fabric. Measure 24 inches (61 cm) from your starting point and mark the fabric. This 24 inches (61 cm) distance will serve as the length of your dinosaur tail.
Make sure that you have enough fabric for these measurements.
3. Make a third mark 2 inches (5.1 cm) above the second mark. Take your measuring tape and make a dot 2 inches (5.1 cm) above the second mark. This third measurement represents the pointy, bottom end of the tail.
4. Connect the 3 marks with a marker and cut out the tail shape. Use a fabric marker to sketch the line that connects these three points before removing the piece with scissors or a rotary cutter. Rotary cutters can be found at most craft stores, and provide a more even and exact cut along the edge of your fabric.
If you want to make your lines exact, use these measurements to sketch and cut a template out of cardboard beforehand.
5. Trace a plate on fabric twice to create 2 circles for the tail’s base. Place a ceramic plate onto the fabric and cut around it with scissors or a rotary cutter. Repeat this process so that you have 2 circles. The diameter of this circle will be the width of your dinosaur tail.
Use folded fabric if you want to cut 2 circles out at once.
6. Measure and cut out 2 pieces of fabric to create the waist straps. Use a measuring tape to mark and cut out 2 strips of fabric. The length should be 12 inches (30 cm), and the width should be 4 inches (10 cm).
These strips will help attach the dinosaur to a child’s waist.

Method 3 Adding the Spikes and Waist Straps.
1. Sketch a series of triangles onto a piece of felt using a fabric marker. Use a ruler or measuring tape to sketch a row of triangles onto the felt. Make the triangles, which will be the tail spikes, about 2 inches (5.1 cm) tall and 2 inches (5.1 cm) wide. Ensure that there’s 0.5 inches (1.3 cm) between each spike.
You can make the spikes bigger or smaller, depending on how you want the tail to look at the end.
You can also make individual triangular spikes.
2. Arrange the cut spikes on the edge of the tail fabric and pin them in place. Use fabric scissors to cut the spikes out of the felt. Begin constructing your dinosaur tail by positioning the trail of spikes between the folds of the base tail fabric. Pin the spikes so that they face inward, as you will be sewing the fabric from the inside out.
3. Use a sewing machine to attach the spikes to the main fabric. Feed the fabric through the machine to stitch the base tail fabric and spikes together. Go along the curved shape of the tail, leaving less than a 0.5 inches (1.3 cm) of space between the stitches and the fabric’s edge.
Pinch and tug on the fabric on the inside of the tail to pull the tail right side out.
Remember to remove the pins from the fabric as you sew.
4. Fold and pin the waist strap fabric at the ends before sewing the edges together. Crease the fabric along the center so that the short ends are touching, and use a few pins to secure the fabric in this position. Stitch the edges together lengthwise, but leave the shorter end open. Pinch the fabric on the inside of the stitching to pull the straps right side out.
You’ll be stitching the shorter, unsewn ends of the waist straps into the base of the tail.
5. Stitch the Velcro rectangles to the straps and attach the waist straps to the tail. Take a small rectangle of Velcro and place it on the sewn end of the waist strap before stitching it into place with a sewing machine. Then, take the unstitched ends of the waist straps and pin them to the inside of the tail. Make sure that the straps are placed perpendicular to the spikes before sewing them into place. Check to see that the strap is long enough to wrap around a child’s waist. Pin the straps onto the tail and sew them into place.
You can purchase Velcro at a craft store.
You can also sew Velcro by hand.
6. Pin the base circles along the edges and stitch together. Take the 2 base circles and secure them with pins along the edges. Make sure that the circles are centered against one another before you sew them together.
Leave at least 1 inch (2.5 cm) of space to turn the circle right side out.
After sewing the edges together, pinch and tug at the inner fabric of the circle to make pull it right side out.
7. Fill the tail with stuffing until it has a firm shape. Take fiber filling and stuff the base of the tail. Use as much fiber as you need to completely fill the dinosaur tail.
You can buy fiber filling at a craft store. You may need more than one bag to fully stuff the tail.
8. Use a ladder stitch to close off the base and complete the tail. Tuck and fold the excess fabric into the tail before sewing it shut with a ladder stitch. This part can be completed by hand.
The ladder stitch helps all portions of stitching to look uniform.

Tips.
Iron your material beforehand to remove any wrinkles. Take an iron and apply heat to your fabric in long, even strokes. Loosely woven fabrics like cotton and linen are great options to make a dinosaur tail, or you can opt for satin if you want a shinier look. Check the care label on your fabric to ensure that it can be ironed before you proceed.
Things You’ll Need.
Creating a No-Sew Dinosaur Tail.
Fabric.
Felt.
Bowl.
Fabric marker.
Hot glue gun.
Hot glue sticks.
Scissors.
Cutting and Sewing a Tail Shape.
Fabric.
Measuring tape.
Fabric marker.
Scissors.
Rotary cutter (optional).
Plate.
Adding the Spikes and Waist Straps.
Felt.
Pins.
Sewing machine.
Scissors.
Small Velcro rectangles
Fiber stuffing.
Measuring tape.
Fabric marker.
Sewing needle.
Thread.

Maret 21, 2020

how to crochet a kitty eyeball toy

How to Crochet a Kitty Eyeball Toy.

A toy that says "eye love my cat". This eyeball toy is easy to crochet and will prove very entertaining for your cat.



Skill level: Intermediate



Steps.

1. Note that the pattern is worked continuously without joining or turning between rounds. To help keep track of your stitches, it may be helpful to place a stitch marker at the beginning of each round.

2. Commence crocheting. With black, ch 2.

Rnd 1. 6 sc in second ch from hook. 6 sc.

Rnd 2. 2 sc in ea sc around. 12 sc.

3. Change to Iris Color.

Rnd 3. Sc in blo of first sc, 2 sc in blo of next sc, *sc in blo of next sc, 2 sc in blo of next sc; rep from * around. 18 sc.

Rnd 4. Sc in first 2 sc, 2 sc in next sc, *sc in next 2 sc, 2 sc in next sc; rep from * around. 24 sc.

Rnd 5. Sc in first 3 sc, 2 sc in next sc, *sc in next 3 sc, 2 sc in next sc; rep from * around. 30 sc.

Rnd 6. Sc in first 4 sc, 2 sc in next sc, *sc in next 4 sc, 2 sc in next sc; rep from * around. 36 sc.

4. Change to white.

Rnd 7. Sc in blo of first 5 sc, 2 sc in blo of next sc, *sc in blo of next 5 sc, 2 sc in blo of next sc; rep from * around. 42 sc.

Rnds 8 - 14. Sc in ea sc around.

Rnd 15. Dec 1 in first 2 sc, sc in next 5 sc, *dec 1 in next 2 sc, sc in next 5 sc, rep from * around. 36 sc.

Rnd 16. Dec 1 sc in first 2 sc, sc in next 4 sc, *dec 1 sc in next 2 sc, sc in next 4 sc, rep from * around. 30 sc.

Rnd 17. Dec 1 sc in first 2 sc, sc in next 3 sc, *dec 1 sc in next 2 sc, sc in next 3 sc, rep from * around. 24 sc.

Rnd 18. Dec 1 sc in first 2 sc, sc in next 2 sc, *dec 1 sc in next 2 sc, sc in next 2 sc, rep from * around. 18 sc.

Rnd 19.' Dec 1 sc in first 2 sc, sc in next sc, *dec 1 sc in next 2 sc, sc in next sc, rep from * around. 12 sc.

5. Stuff the toy.

6. Complete Rnd 20. Dec 1 sc in first 2 sc, *dec 1 sc in next 2 sc; rep from * around. Join with sl st to first sc in rnd. Do not finish off; 6 sc.

7. Finish. Ch 3. Keep the loop of yarn on the crochet hook and pull it taut. Do not remove the hook! Hold the three feathers flat against the ch-3 chain, with the tips of the feathers pointing toward the eyeball.

8. Tape the feathers around the ch-3 chain to keep them in place, leaving 1 inch (2.5 cm) of the stems of the feathers extending above the tape. Then, still keeping the loop of yarn on the crochet hook, take the free end of the yarn and wrap it tightly around the stem of the feathers, covering the tape and working from top to bottom.

9. Fold the stems of the feathers down over the section that was just wrapped in yarn and tape in place again. Once again, keeping the loop of yarn on the crochet hook, wrap the free end of yarn tightly around the tape, this time working from bottom to top.

10. When the entire taped section is wrapped in yarn, begin with the loop still left on the crochet hook and work 36 ch as usual. Then remove the crochet hook from the last chain and thread the loop through the holes in the jingle bells (you may need to pull the loop to make it long enough to thread through the bells, but take care not to rip out the entire ch-36 chain).

11. Reinsert the hook into the loop and sl st in the first ch of the ch-36. Finish off. Weave in all ends. If desired, brush a coat of non-toxic white craft glue around the wrapped, taped ends of the feathers to prevent unraveling. Allow to dry completely overnight.

12. Finished.



Tips.

Finished size: About 3 inches (7.6 cm) in diameter.

Abbreviations.



blo = back loops only.

ch = chain.

dec = decrease.

ea = each.

mm = millimeter.

rep = repeat.

rnd = round.

rnds = rounds.

sc = single crochet.

sl st = slip stitch.

yd = yard.

Things You'll Need.

White: 120 yard (109.7 m) 4/worsted weight yarn.

Iris color: Scrap 4/worsted weight yarn.

Black: Scrap 4/worsted weight yarn.

Size F-5 (3.75 mm) crochet hook.

Two 3/4-inch jingle bells.

Three craft feathers.

Stitch markers.

Yarn needle.

Polyester fiberfill or stuffing of choice.

Clear adhesive tape.

Non-toxic white craft glue (optional").

Februari 23, 2020

how to make a clay cat

How to Make a Clay Cat.

Creating clay animals is so much fun and makes a perfect hobby or training exercise for budding artists. You can use clay to make any animal or object you can think of or imagine, but this article focuses on a clay cat.


Steps.

1. Gather clay, tools, and some big black beads. Get the clay colors that speak to you when you envision the cat. Good choices might be brown, black, pink, red, and yellow clay. You will add interest by creating details with tools such as forks, plastic knives, garlic pressers, whatever your imagination brings forward. The varied textures and colors will make your creature eye-catching.

2. Start by rolling out a big piece of brown clay and forming it. This will be the body. Roll the brown clay in a big ball. Then squeeze the top sides a little to create an egg-shaped body.

To add more detail to the belly, flatten a piece of pink clay into an egg shape, a bit smaller than the body. Then stick it on body for the stomach.

3. Roll a ball of brown clay for the head. Use something to keep it in place, such as a toothpick, when you stick it on top of the body.

4. Make cheeks by flattening two small balls. Put them next to each other on the bottom of the head (not all the way at the bottom). Add a very small ball under the cheeks in the middle.

5. Add the nose on top of the cheeks in the middle.

6. Add eyes using the black beads. You don't really need to make a mouth though because the snout forms the mouth.

7. Make small triangular-shaped ears and poke a small hole in them (not all the way through). Put some pink clay inside the holes and stick the ears on top of the head.

8. Drag a toothpick on the sides of the snout to make whiskers. You can also stick in string to make whiskers.

9. Make front legs. Bend a little at the front to make paws. Add claws by pushing a line down on each paw with a toothpick three times. Stick them on the front of the clay cat.

Do the same method with the legs, but stick them in the back.

Add pads on the arms and legs to add more detail, but you don't have to if you don't want to.

10. Add a tail on the back at the bottom.

11. Finished.


Question : I need more information, can someone help me?

Answer : Knows about Knitting Stitches, Crochet, Flower Arranging and Floral Art, and more. There are several types of clay available in craft stores. Sculpy clay needs to be baked to harden. Crayola air-dry clay comes in white that can be painted after shaping and drying. It does come in different colors, but does not come as a small multi-pack of different colors. Read the packaging for tips on how to use the clay.

Question : How do I make a clay mouse?

Answer : Make a ball, then cut it in half and add a tail and ears.


Things You'll Need.

Clean work surface.

Modelling clay.

Toothpicks.

Implements (to add shape and texture).

Februari 17, 2020

how to make a small penguin christmas ornament

How to Make a Small Penguin Christmas Ornament.

Make a small penguin ornament suitable for hanging on a Christmas tree.



Steps.

1. Cut out the body, cut 2 pieces. Attach the white belly to the body using one strand of black embroidery floss folded in half. Knot the end just like sewing with thread. Refer to the picture in the same area you find the pattern.

2. Place the blank sides together. Sew the body together with black sewing thread, leaving the bottom open to turn and stuff later. Keep your stitches small and as close to the edge as possible without missing any areas. Turn the ornament right side out and check for any missed areas.

3. Stitch the hat together wrong sides together, then turn right side out. The hat base (the white square) fold into a long square then sew together with white sewing thread making a circle. Turn that right side out and glue that to the bottom of the hat. A hot glue gun is recommended it seems to stick a little better, but be careful of your fingers. Also, using hot glue, attach the pompom to the end of the hat. This is the reason his hat is flat at the tip, to accommodate for the pompom.

4. Take two small eyes and glue to the top of his belly part. Use just craft glue for this.

5. Fold the beak into a triangle (in half) and using the hot glue, glue the beak just below his eyes. Again, be careful with the little pieces.

6. Glue the finished hat onto his head with the hot glue. You can also put some fiberfill (stuffing) into the hat for body, before you glue it.

7. Cut a 12" by 1/2" strip of felt (of whatever color you'd like), and tie that around his missing neck above his arms and below his face. You might want to experiment with the width and length of the scarf. You can also cut the ends in strips to make a little fringe. Tie that around him, you might want to glue a small section of the back down, as well as underneath where it's tied just so it doesn't come apart. He'll catch cold if he doesn't have his scarf on.

8. Stuff his body to the desired girth you'd like him to have. Sew up the bottom.

9. Attach thread or ribbon to the back. The form is up to your own creative wishes.

10. Embellish it. For example, glue snowflake to his hat, and place a present in his hand.

11. Finished.



Tips.

Decorate as you see fit.

Change colors of the hats, scarf, etc.

Warnings.

If you use a hot glue gun, please supervise children.

Things You Need.

Felt (black for the body, white for the belly, a goldfish yellow color felt for the beak, red and white again for the hat and color of your choice for the scarf.)

Black embroidery floss, separated into strands, e.g. DMC #310.

Small googly eyes.

MM eyes.

A small white pompom.

Februari 10, 2020

how to paint a row of bird houses in watercolor

How to Paint a Row of Bird Houses in Watercolor.

Bird houses can be as plain or as ornate as houses for people, but, as a subject for an art work, they are a lot less intimidating. While we enjoy seeing and thinking about homes for birds, we might live where it is impractical to install an actual bird house. The solution is to paint a picture of bird houses. Because of its simplicity, this project is virtually fail proof, even for a non-artist. So, go ahead, tackle architecture, but begin on a bird's scale.



Steps.

1. Cut a rectangle of 140 lb. cold pressed watercolor paper and draw a pencil line 2" (5cm) up from the bottom edge to create a base for the houses to stand on.  Later, you can paint this to represent a limb of a tree or a platform.

2. Draw a simple house starting with a square 3½ in (10cm) on a side, in pencil to represent the body of the house.  To construct a slanted roof, the center point (1¾", 5cm) and draw a line upward a few inches. Close the roof by dropping two lines from the center point to each side of the house.

3. Alternatively, trace a miniature wooden birdhouse purchased from the craft or discount store. Simply place the house on your paper, back down and draw around it in pencil.

4. Repeat drawing houses until you have four in a row. Allow a slight space between them. Arrange them according to your taste, varying sizes and shapes.

5. Add details to each house such as entry holes for the birds, a picket fence, shingles, siding, or anything you wish. Go to the internet to look for ideas.

6. Embellish the houses with vines, flowers, leafs, beds, berries, tree branches, etc. Use the vines as a device to intertwine and connect the houses and it will lead the viewer's eye through the composition.

7. Put a bird or two in the picture. Draw one from your imagination or go online for pictures of birds. Put them standing still or in motion, flying into the picture.

8. Prepare your watercolors by adding water to each pad if you are using pan paints. If you are using tube paints, set up your palette with primary, secondary and neutral colors. Remember to leave the center part of the palette open for mixing colors.

9. Set out brushes, a ½" (1cm) flat for big areas, and some pointed ones in various sizes.

10. Begin painting by pulling a color for the body of the house, diluting it with clear water and making a puddle large enough to cover the area you wish to fill.

Repeat the process with a different color for each house.

Paint the houses, the area beneath the houses, and the sky.

Allow the paper to dry before attempting to paint over it or the colors will run into one another. Use a hairdryer to hasten the process, if desired.

11. When dry, paint the greenery, flowers, birds, sun and any other touches you can think of.



How to Make a Tweeting Bird in a Cage from Plastic Straws. Tips.Try a technique called negative painting for a white object, such as a picket fence or a daisy. You simply paint around the object, keeping the white paper as your white color. Use a small, pointed brush and dip from the puddle on your palette that is the color the flower or fence is standing against.

Dry the paint before attempting to add a new layer.

If tiny hairs get in the paint from the brush, allow the area to dry and brush the hairs away. If you try to pick them off with your fingers, you will mar your wash and leave finger marks.

Februari 08, 2020

how to make a polymer clay penguin

How to Make a Polymer Clay Penguin.

There's no denying that penguins are among the cutest critters to populate this planet. Unfortunately, having a real one might be out of the question for most people. Luckily, it is possible to make a miniature penguin out of polymer clay. You can even insert a small eyehook or eye pin to turn it into a charm so that you can take it wherever you go!

Method 1 Making a Basic Penguin.

1. Make the body of the penguin. Knead some black clay until it turns soft. Roll it into an oval, about twice the height of your thumbnail. Flatten one of the oval's pointy ends against your work surface until it can stand on its own.

2. Make the head of the penguin. Roll some black clay into a small ball, about the same size as your thumbnail, or half the height of the body.

3. Attach the head to the body. Gently press the head on top of the penguin's body. Don't worry if the head squishes a little. If you'd like, you can use a clay sculpting tool to smooth the seam between the head and the body.

4. Roll some white clay out into a thin sheet. Clean your hands first, then knead some white clay until it turns soft. Roll the clay into a thin sheet using an acrylic rolling pin or tube. You can find acrylic rolling pins in the polymer clay aisle of an arts and crafts store.

If you can't find any acrylic rolling pins, you can use a regular rolling pin, a fat marker, or any other smooth cylinder.

5. Cut an oval and a heart out of the white clay. The oval will make the belly and the heart will make the face. Both need to be a little smaller than the body and head respectively. You can use mini polymer clay cutters for this; they look like miniature cookie cutters. You can also cut the shapes freehand with a craft blade instead.

6. Stick the white shapes onto the body and head. Gently press the white heart onto the head, and the white oval onto the body. Make sure that the bottom of the heart and the top of the oval go into the crease between the head and body.

7. Roll some black clay into a thick sheet. Clean your hands again, and knead some more black clay until it turns soft. Roll the clay into a thick, black sheet. Plan on making it twice as thick as the white sheet. This will eventually make the wings.

8. Cut two wings out of the sheet. Start by cutting an oval out of the clay, a little bit shorter than the body. Cut the oval in half, lengthwise, so that you end up with two semi-ovals. You can use a craft blade to do this.

9. Add the wings onto the penguin's body. Gently press the wings down onto the body to either side of the white belly. The flat edges of the wings should be facing the white belly. The tips of the wings should be nestled into the crease between the head and the body.

Don't worry if the wings overlap the white belly a little.

Consider flipping the bottom of the wings outwards for a cute touch.

10. Make a beak. Clean your hands, and knead some orange clay. Roll the clay into a tiny teardrop or cone.

11. Attach the beak. Press the bottom of the teardrop/cone into the middle of the penguin's face.[4] Use a craft blade to cut the beak open after you attach it, if desired. This will give your penguin an open mouth instead of a closed one.

12. Make the feet. Roll a small ball out of orange clay. Cut the ball in half using a craft blade. Cut two notches into each dome to make the feet.

13. Attach the feet. Turn the penguin upside down. Pinch the back of both feet, then press them into the base of the body. Make sure that the front of the feet (the notched parts) stick out from under the body. Place the penguin right-side-up against the table, and adjust the feet, if needed.

14. Consider inserting an eyehook. If you wish to turn this penguin into a charm, press a jewelry eyehook through the top of the head and into the body. If the hook is very long, trim it down first using a pair of wire cutters.

15. Bake the penguin according to the manufacturer's baking times and temperatures. Turn on your oven, and let it reach the recommended temperature, usually between 215 to 325°F (102 to 163°C). Place the penguin on a foil-lined baking sheet, and bake it for the recommended time, typically 15 to 20 minutes.

Each company will be a little different, so you will need to read the label on the clay's wrapper.

If your penguin has a lot of fingerprints on it, gently brush it with a soft-bristled paintbrush before you bake it.

16. Allow the penguin to cool before adding the eyes. Use a black permanent marker to draw two dots on the penguin's face, right above the beak. Position them in the loops of the "heart". You can also use a thin brush and acrylic paint.

17. Glaze the penguin, if desired. If you wish to make the penguin shiny, get some glaze meant for polymer clay. Paint the penguin with the glaze, then let the glaze dry.[9] Refer to the label on the bottle, as each brand's drying times will vary.

Method 2 Making a Penguin Charm.

1. Shape the body. Knead some polymer clay until it softens, then roll it into an oval. Flatten the oval with a glass so that you get a disk shape. Cut off one of the pointy ends of the oval, so that the penguin can stand upright.

Penguins are typically black, but since you are making a cute penguin, you can make him or her any color you want! Pink, baby blue, or light purple would be especially cute!

2. Roll some white clay into a thin sheet. Clean your hands first to avoid transferring color, then knead some white clay until it softens. Roll it into a thin sheet using an acrylic rolling pin. You can find it in the polymer clay aisle of an arts and crafts store.

If you can't find an acrylic rolling pin, you can use another smooth cylinder, such as a fat marker or a rolling pin.

3. Cut an "m" shape out of the sheet. This will make the body and face of your penguin. It needs to be the width as body, but a little shorter. Use a craft blade to cut the shape out.

4. Press the white "m" onto body. Be sure to match up the base of the "m" with the base of the body. You will have a slight gap between the top of the "m" and the top of the body.

5. Make a beak. Clean your hands, then knead some orange clay until it turns soft. Press it into a thin disk, then cut a small triangle out of it using a craft blade.

6. Attach the beak. Press the triangle into the middle of the white part on the body. Make sure that the pointed tip of the triangle is pointing downward.

7. Add some eyes. Roll two small balls out of black clay. Press each ball onto the penguin to either side of the beak. They should just barely be touching the upper corners of the bead.

If you don't have any black clay, you can skip this step, and paint the eyes on instead after you are done baking.

8. Insert an eyehook into the top of the penguin. Measure the eyehook against the penguin first. If it is too long, trim it down with a pair of wire cutters. Push the eyehook down through the top of the penguin.

9. Bake the penguin. Preheat your oven to the temperature specified by the manufacturer, typically between 215 to 325°F (102 to 163°C). Place your penguin onto a foil-liked baking sheet. Bake the penguin for the time recommended by the manufacturer, typically 15 to 20 minutes.

Each brand of clay will have different baking times and temperatures. Read the label on the clay's wrapper carefully.

If the eyehook is still look, put a little superglue around the seam.

10. Paint some feet onto the penguin once it cools. After the penguin is done baking, take it out of the oven and let it cool. Use a thin paintbrush and some orange, acrylic paint to add two small v's at the bottom of the penguin. If you don't have any paint at home, you can use an orange permanent marker instead.

11. Glaze the penguin, if desired. Get some glaze meant for polymer clay. Thread some string through the eyehook and tie it into a loop. Dip the penguin into the glaze, then lift it out. Let the excess glaze drip off, then hang the penguin by the loop so that it can dry.

Place a sheet of scrap paper under the penguin as it is drying to catch any excess glaze.

Tips.

You can bake your penguin in a convection over, regular oven, or toaster oven.

Most polymer clays bake at 215 to 325°F (102 to 163°C).

If the clay becomes too soft and squishy, set it aside until it becomes firmer. You can also put it into the fridge for a few minutes instead.

Clean your hands with baby wipes between colors. This keeps your fingers from accidentally transferring color between the clay pieces.

Gently brush the clay with a soft-bristled paintbrush after you are done sculpting, but before baking. This will help remove fingerprints.

You can make your penguin any color your want. Consider switching out the black for light blue, pink, or light purple.

If the clay is too hard to work with, knead it between your hands for a few minutes first.

If the clay is still too hard, add some clay softener into it. It is usually sold alongside the rest of the polymer clay.

Avoid mixing different polymer clay brands, as they tend to require different baking temperatures.

Glaze the penguin when you are done. You can apply the glaze with a paintbrush, and let it dry. If you added an eyehook, use the pin to dip the penguin into the glaze.



Warnings.

Do not bake your penguin in the microwave.



Things You'll Need

Making a Basic Penguin.

Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin, Oven.

Baking sheet, Aluminum foil, Black permanent marker or acrylic paint, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).



Making a Penguin Charm.

Polymer clay, any color (for body), Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin.

Oven, Baking sheet, Aluminum foil, Orange acrylic paint, Thin paintbrush, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).

Januari 25, 2020

how to make papier mache eggs

How to Make Papier Mâché Eggs.

Papier-mâché eggs are both easy and fun to make. You can paint them bright colors and use them as Easter decorations, or you can paint them to look like real wild bird eggs and display them in your room. They do take a few days to dry, but they are a great, hands-on activity, which many children love. When you are finished, you can even fill them with candies, and crack them open later!

Method 1 Making Basic Eggs.

1. Blow up a balloon, tie the end into a knot, and set it down in a small cup. The cup will prevent the balloon from rolling away while you work.

2. Mix 2 parts white school glue with one part water in a small bowl. This will be your papier-mâché glue.

3. Tear some paper into small squares or rectangles. Newspaper works best, but you can also use plain newsprint paper from the craft store instead. Don't cut the paper; the ragged edges will help the paper seal together and give you a smoother finish.

Consider using both newspaper and tissue paper. This way, when you do multiple layers, you will be able to see which one you are working on.

Avoid using plain printer paper or construction paper. Both are too thick and too stiff for this project.

4. Dip a paper strip into the glue, and place it onto the balloon. Drag the strip across the edge of the bowl as you pull it out. This will remove any excess glue. Place it down near the top of the balloon. Use your fingers or a paintbrush to smooth the paper down so that it lays flat against the balloon.

5. Continue applying the paper strips until the balloon is completely covered. Overlap the strips slightly as you work from one end of the balloon to the other. Work your way from the top of the balloon all the way down to the tail end. Do not cover the tail, or you won't be able to remove the balloon.

6. Apply a second layer of paper. You don't have to dip these strips of paper into the glue. Simply stick them to the wet paper that's already on the balloon, and use your fingers or a paintbrush to smooth down the edges.

Consider using a tissue paper or plain newsprint for this layer. This way, you will be able to see what's cover and what isn't.

Two layers is ideal for eggs that you want to cut open. If you want a sturdier egg, apply a third layer. You may have to use some extra glue for this one.

7. Hang the balloon up to dry. Use a clothespin to clip the balloon to a hanger or clothesline. Wait for it to dry completely before moving on. It may take up to 2 or 3 days.

8. Pop and remove the balloon. Once the egg is completely dry, gently tug the balloon tail up so that you expose a bit of the balloon. Pierce it with a pin or pair of scissors and wait for the balloon to deflate. Once it is completely deflated, pull it out and discard it.

9. Cover the hole with 2 to 3 layers of paper and glue and wait for it to dry. Use the same technique as you did for the rest of your egg. If you wish to fill your egg, then do so before covering up the hole.

10. Paint the egg a solid color using acrylic or tempra paint and wait for it to dry. To make the paint really stand out, coat the entire egg using white primer and let it dry. Once you have your white base, you can paint your egg any color you want.

11. Add patterns to the eggs, if desired. Once your base color has dried, you can paint designs onto it. You can also draw designs using glitter glue or puffy paints instead.

Great Easter designs include: stripes, dots, and squiggles. Try to use soft, pastel colors.

12. Consider giving the eggs a final coating of gloss. Once all the paint has dried, spray or paint the eggs with a glossy sealer. You can even use a glittery sealer to give it some extra sparkle.This will help make them more durable.

If you'd like, you can cut the egg in half using jagged, zigzag lines so that it resembles a cracked open egg. When you are done, you can fill each half with fake grass, and place a little chick or bunny figure in each.

Things You'll Need : Water balloon, Newspaper, Paintbrush, Water, White school glue, Small cup, Scissors, Clothespin.

Method 2 Making Tissue Paper Eggs

1. Blow up a water balloon, tie the end into a knot, and set it down into a cup. The cup will hold the balloon sturdy while you work.

2. Pour some liquid starch or decoupage glue into a bowl. You can also mix your own glue by using 2 parts white school glue and 1 part water.

3. Cut the white tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the base for your egg. One sheet will be enough to coat three eggs.

4. Cut the colored tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the outside of your egg. You can make it all one color or many different colors. Some crafters have noted that lighter colored tissue paper, such as yellow, shows the layering and overlapping more.

To make polka dot eggs, punch a ¾-inch (1.91 centimeters) circle in the center of your square using a scrapbooking hole punch. Discard the circles, and use the squares so that you get white polkadots on your egg.

5. Start applying the base layer using the white tissue paper. Brush on some of your glue onto the balloon, and press a piece of white tissue paper onto it. Smooth it down with a brush dipped in more glue. Overlap the pieces as you cover the entire egg.

Start applying the tissue paper at the top of the balloon and work your way towards the tail. Don't cover the tail up.

6. Apply the colored layer. If the tissue paper on the balloon is already damp, you do not need to apply more glue. Simply press a piece of colored tissue paper onto it, and smooth it down with a little more glue. Remember to overlap the pieces by a little.

If you are making polka dotted eggs, be careful not to cover up the white polka dots!

7. Hang the balloon up to dry overnight. You can do this by clipping the tail of the balloon to a hanger or to a clothesline. This can take 2 to 3 days.

8. Pop and remove the balloon. Make sure that the balloon is completely dry, then gently tug on the balloon tail until you expose a bit of the balloon. Pierce the balloon with a pin or a pair of scissors. Wait for the balloon to deflate, then pull it out and discard it.

9. Fill the egg with candy, if desired. Small candies, such as chocolate eggs, work great! Be careful not to overfill the egg; it is still very fragile. If you do not wish to fill your egg, you can move onto the next step.

10. Cover the hole with 2 to 3 more layers of colored tissue paper. Use the same technique as you did when first covering the egg. Let the patch covering the hole dry before moving on.

Because these eggs are made from colorful tissue paper, they don't need to be painted. You can still decorate them, however, with glitter glue if you'd like.

11. Give the eggs away as gifts or use them as decorations. To open the eggs, simply tear them apart. They make great gifts for Easter baskets!

Things You'll Need : Water balloon, White tissue paper, Colorful tissue paper, Paintbrush, Liquid laundry starch or decoupage glue, Small cup, Scissors, Clothespin.

Question : Can I fill a paper mache creation with something to make it heavier?
Answer : Sure! Candy works well if you want it to be like a pinata.

Question : Which one is stronger?
Answer : Method 1 will give you a stronger, more durable result, as newspaper is thicker than tissue paper.

Question : Which method is better to create the eggs?
Answer : It depends on what you are looking for. The 1st method is better for making stronger eggs, for example, to put heavier objects in. However, the 2nd method is better if you want to put candy in, as they are much easier to open up, especially for children. If you're thinking of using them for decorations, method 2 would make for prettier, delicate decorations indoors, but method 1 is more advisable for outdoor decorations as the eggs will be more durable against the weather.

Tips.

For a vintage design, use newspaper and don't paint the eggs. Instead, give them a coat of glossy varnish.

You should tear newspaper and newsprint, but you don't have to tear tissue paper.

You can also do this project using regular balloons as well, but it will take more time to dry.

If the egg collapses when you remove the balloon, stick a pen, pencil, or chopstick into it and push the dents out as best you can.

Paint the egg to resemble real bird eggs. Look up pictures of interesting bird eggs online, and try to copy them as best you can. You can create speckles by splattering paint over the egg.

For something quick and easy, decorate your egg with stickers. If this is for Easter, use Easter themed stickers.

If you made your egg using newspaper and wish to paint it, add a layer of blank newsprint or white tissue paper. This way, the letters won't show through.

Decoupage shapes cut out of paper onto your finished egg instead of painting the designs.

Punch out shapes out of tissue paper using scrapbook punches, and press these shapes onto your egg while it is still wet.

Try printed paper that has patterns on it. Origami paper and printed tissue paper is great for this. Avoid using thick or glossy paper, such as gift wrap; it is too thick and stiff for this project.

Warnings.

Do not get impatient when it comes to drying. The papier-mâché must be completely dry before you remove the balloon. If you remove it too soon, the whole egg will collapse!

Januari 21, 2020

how to make a clay bird

How to Make a Clay Bird.

Using clay of your choice, shape a little clay bird with basic features and style. It's a good beginner's clay project, to get you used to shaping a figurine with clay and making basic design indents.

Steps.

1. Start with a clay lump that fits snugly in your hand. Mould it in your hands until you get a ball, then put it on the table. Carefully push down to flatten the bottom, without making holes in the ball with your fingers.

2. Form a ball that is a bit smaller than a ping pong ball. Include a little extra in case (for the neck). Put the head on top of the body at an angle then smooth it in with your fingers and some water. Use the extra to make a neck. To get this part right, it is suggested that you keep a picture of a bird in front of you.

3. Take a small rectangle of clay and put it opposite the head for the tail. Smooth it in, in the same manner as you did with the head.

4. Add some detail. For the beak, just locate the right place and put on a little bit of clay and smooth it in, then use a toothpick to shape the beak. Easy.

5. Take a clay oval and smooth it onto the body. Use a toothpick and your fingers to shape it. Do the same on the other side to make wings.

6. Widen the tail at the end by lightly flattening and pushing into the clay. Make some ruffles by adding and smoothing in some clay strips the length of the tail.

7. Add eyes if you want.

8. Check that there are no cracks, as these weaken it when it's dry. If there are any, smooth them out with water and your fingers.

9. If you want your clay bird to be hollow, make a hole in the flat side that goes to a bit before the edge. Carefully spoon out the clay, being careful at the head. Don't hollow out the tail.

10. Leave to dry. If wished, you can paint the bird or add clear varnish.

Follow the instructions on the clay packaging to determine how best to dry the clay; some clay requires baking, while some clay can air dry.

Question : How do I make a clay unicorn?
 Answer : Use your imagination. Look up pictures of a unicorn. If you know how to make a clay horse, do this and add a horn.

Question : How much is white clay? Where can I buy it?
 Answer : The price of white clay varies depending on where you live and what store you buy it from. You can get it at a craft store or you can order it online.

Question : How do I make a tail?
 Answer : For a bird tail, make a small, thick cone-shaped triangle, and round the tip. For the ruffles, flatten some clay and stick it to the tail. Repeat as necessary.

Tips.

Modeling clay can be found in toy, hobby and department stores. It can also be purchased from online retailers.

Things You'll Need.

Modeling clay (air-dry or bake styles are both fine).

Toothpicks.

Small spoon.

Clay sculpting tool (optional but helpful).

Januari 21, 2020

how to make a ball

How to Make a Ball.

Balls provide endless entertainment for kids and adults alike, so make your own if you want a fun toy to play with this weekend. But there are balls for other occasions, too. If you’re having a rough week, for instance, create a stress ball to squeeze when you just want to scream. Or get creative and make balls out of things like rubber bands, fabric, and even cheese!

Method 1 Making a Bouncy Ball.

1. Combine school glue, cornstarch, and any add-ins in a bowl. Stir together the 1 tablespoon (15 ml) of school glue and 1 tablespoon (15 ml) of cornstarch until they’re thoroughly combined, using a spoon or wooden stick. If you want to add any extras, like food coloring or glitter, do so now.

You can use either white or clear school glue. If you use white glue and don’t add any coloring, your ball will be white.

Fun Add-Ins for Your Bouncy Ball

Sprinkle in glitter for a little extra sparkle.

Squeeze in a few drops of food coloring to make a ball in your favorite hue.

Stir glow in the dark paint into the glue for a ball that can be used at night.

Swirl 2 colors of food coloring together if you want a multi-colored masterpiece.

2. Stir warm water and Borax together in a separate bowl. Mix 2 tablespoons (30 ml) of warm water and 1⁄2 teaspoon (2.5 ml) of Borax until the Borax is completely dissolved. Stir vigorously to ensure there are no clumps of powder left in the bowl.

Heat the water in the microwave or on the stove until it’s warm to the touch. It shouldn’t be boiling.

You can find Borax in the laundry aisle of a store.

Borax is safe to use, but it's poisonous if ingested in large quantities. If you or your child get it in your eyes or mouth, contact poison control immediately.

3. Add 1⁄2 teaspoon (2.5 ml) of the Borax mixture in the bowl with the glue. Do not stir the ingredients together when you add them. Simply pour the Borax and water into the other bowl containing the glue and cornstarch.

Set aside the remaining Borax mixture if you plan on making more balls.

4. Let the mixture sit for 15 seconds. This allows time for the Borax to react with the glue, making the polymers of the glue link together which will create the ball shape. If you start stirring right away, the bouncy ball may not form or harden properly.

Set a kitchen timer or use the clock app on your phone to keep track of the time.

5. Use a spoon to combine the ingredients until they’re too thick to stir. Within 1 to 2 minutes, the mixture will thicken. Stir vigorously while the mixture is still liquid to make sure the ingredients are blended well.

Choose a sturdy spoon, like a metal or thick plastic one. Something flimsy, like a plastic spoon, will likely break off in the goo.

If you’ve made homemade slime with Borax, this process is very similar.

6. Remove the mixture and roll it between your hands to form a ball. Once the mixture is too thick for your spoon or stick, pull it out of the bowl and place it between your palms. Roll it around by moving your hands in circular motions until the ball is no longer sticky.

The more you handle the ball, the more firm it will become.

If you’re having trouble getting rid of the stickiness, dip the ball in the Borax water, then roll it a little more. This should remove any tacky texture.

7. Let the ball harden for about 10 to 20 minutes before you use it. This dries the ball a little more, so that it’s extra bouncy. If the ball starts to flatten while it sits, simply roll it back into shape when you’re ready to play with it.

Once you’re done playing, store the ball in an airtight container to prevent it from drying out. Keep it in a cool, dark place, like the pantry.

If stored properly, your ball could last for up to 6 months. It won’t go bad, but it will dry out eventually.

To make more bouncy balls, mix up another batch of glue and cornstarch and use some of the leftover Borax and water mixture.

Things You'll Need.

2 tablespoons (30 ml) of warm water, 1⁄2 teaspoon (2.5 ml) of Borax, 1 tablespoon (15 ml) of school glue, 1 tablespoon (15 ml) of cornstarch.

Spoon or wooden stick, 2 cups or small bowls, Food coloring or other add-ins (optional), Airtight container (optional).

Method 2 Creating a Paper Soccer Ball.

1. Trace 20 hexagons on white paper, then cut them out. Draw your hexagons on the paper with a template, making each side the exact same length. Use scissors to carefully cut along the traced shapes, then set them aside.

If you want a life-sized soccer ball, make the edges 2 inches (5.1 cm) long.

To make a template, use a ruler to draw the hexagon shape on a piece of cardboard. Cut it out and trace around it with a pencil to make each paper hexagon.

Cardstock is the best type of paper to use for this craft. It’s sturdy enough to hold the shape of the ball yet still easy to fold.

2. Trace and cut out 12 black pentagons with sides the same length. The edges of the black and white pieces need to be equal so that they fit together properly. Use a template to draw your pentagon shapes, then cut them out with scissors.

For example, if you’re creating a life-sized ball, make your pentagon sides 2 inches (5.1 cm) long.

You can use a different color paper instead of black, or get creative and make a multi-colored ball with a variety of shades.

Cut a pentagon template out of cardboard to trace on the black paper so that the pieces are all equal size.

3. Fold up a thin border around each hexagon and pentagon. This edge will allow you to build your ball seamlessly, so there are no gaps between pieces. You only want to fold enough of each edge to have a place to apply glue or tape. Keep the border size equal on each piece so they all remain the same size after folding.

To fold the same border on each piece, trace the border before you fold, using a ruler to ensure each edge is an equal width.

Use a straight edge, like a ruler, to help you fold the edges in a perfect line.

If the edges are crooked, re-fold them. They have to be straight for your ball to be the right shape.

To make folding easier, snip off the corners of your border before you fold. This allows you to fold the edges up without dealing with corners that crumple up or stick out.

4. Apply glue or tape to the folded edges of each piece. This is how you’ll stick the the pieces together to form the ball. Swipe glue on each of the edges of all the hexagons and pentagons. You can also use a strip of tape on the edges instead.

A glue stick will work better than liquid glue to prevent the paper edges from getting soggy.

If you are slow at putting the ball together, you may want to apply the glue as you go, rather than all at once. Otherwise, it will dry out on the final pieces by the time you get to them.

5. Attach 5 white hexagons to 1 black pentagon. On a standard soccer ball, each black piece is completely surrounded by white pieces. Press 1 white hexagon onto each edge of a black pentagon. Hold the edges together until the glue dries.

If you’re using a glue stick, the glue will dry almost instantly. Wait about 5 to 10 seconds while pressing the edges against one another.

6. Continue gluing the pieces together in this pattern, forming the soccer ball. On the other edges of the white hexagons that you attached to the original pentagon, glue more black pentagons. Don’t forget to glue the white edges that touch each other, too. Once you connect all of the pieces, you’ll have a ball shape.

A black piece should never touch another black piece. However, white edges will touch other white edges.

If you’re having trouble visualizing the pattern, look up an image of a soccer ball online as a guide.

You can stuff the ball with shreds of paper if you want to create a fuller shape.

Things You'll Need.

Black and white sheets of paper, Scissors, Cardboard.

Pencil or pen, Glue stick or tape, Homemade Stress Ball, 12 in (30 cm) latex balloon.

Method 3 Using Play Dough for a Homemade Stress Ball.

1. Use your hands to roll play dough into a long shape. Place a pile of play dough on a flat surface, then gently roll it out with the palms of your hands. This should form what looks like a snake.

It doesn’t matter what color play dough you use, since it will just be going inside the balloon.

Buy pre-made play dough or make your own at home.

If you buy play dough, use one 5 oz (140 g) container per balloon.

2. Insert the play dough into the balloon. Stretch the neck of the balloon open as wide as you can, then stuff the play dough snake into the balloon. The play dough should fill the balloon just to the base of the neck.

If there is a lot of empty space in the balloon, add more play dough.

Stretch out the neck of the balloon before you insert the play dough to loosen it up.

This step is easier if you have someone else hold the balloon open while you put the play dough inside.

3. Tie a knot in the neck at the top of the balloon to secure it. This will keep all of the play dough inside the balloon. Wrap the neck around your finger to make your knot, tying it as tightly as possible.

If you want extra protection, you can place your original balloon inside another empty balloon before tying it shut. This adds a double layer in case you poke a hole.

You can decorate your stress balls with permanent markers if you’d like. For example, you could draw a funny face or write a calming phrase, like “just breathe.”

Things You'll Need.

Permanent marker (optional).

Method 4 Forming Other Types of Balls.

1. Build a rubber band ball for a creative way to store supplies. Instead of tossing your rubber bands in a drawer, keep them together in 1 big ball. Fold up a thick rubber band to form the center, then begin wrapping all of other bands around it. Criss-cross directions often to round out the ball.

You can also wrap your bands around a bouncy ball or crumpled-up piece of paper for a larger ball.

Start with smaller rubber bands, then add the larger ones as the ball gets bigger.

2. Sew a fabric ball if you want a soft toy for kids or pets. Young children, particularly babies, could get injured by hard rubber balls. Instead, stitch together a ball out of strips of fabric, then stuff it with polyfill for a plush feel or use dried beans for a bean bag texture.

This also makes a great pet toy for dogs to chew on or for cats to bat around. If the ball is for a pet, pick a durable fabric like vinyl or nylon and keep your pet in sight as it plays with the ball.

You can use a sewing machine to make your ball or sew it by hand.

Cotton is ideal for kids’ toys since it’s a long-lasting and soft fabric that’s easy to wash.

3. Use ice to make a ball for a unique cocktail add-in. Not only do ice spheres look much cooler than regular cubes floating in your drink, they also melt slower, so your beverage doesn't get watered-down as quickly. Fill a silicone ice ball mold with water, then place it in the freezer for at least 6 hours, or until the balls have set and hardened.

For extra flair and flavor, add things like fresh herbs or edible flowers into the water in the mold before it freezes.

You can buy ice ball molds from a kitchen store or online retailer.

4. Make a cheese ball if you’re having people over for dinner or a party. When it’s your turn to play host or hostess, whip up a cheese ball as an impressive appetizer. Mix together cream cheese and other soft cheeses, shape it into a ball, then chill it in the refrigerator. Roll it in chopped nuts and other garnishes before serving.

You can substitute mascarpone, neufchatel, or goat cheese for the cream cheese if you’d like.

Pair any type of softer cheese with the creamy base, depending on your taste preferences. As long as it’s not a dry, crumbly cheese like parmesan, it will work.

Serve a cheese ball with finger foods for dipping, like crackers, pretzels, or raw veggies.

Warnings.

Borax is poisonous. Get help immediately if you accidentally ingest it or get it in your eyes.

Never let young children handle Borax without close supervision.

Januari 20, 2020

how to make a beaded lizard

How to Make a Beaded Lizard.

Here's a cute, fun, and creative afternoon activity that you can make and attach to your backpack or even wear as a necklace. All it takes are some beads, string, and a keychain clasp.

Method 1 Preparing the Body.

1. Cut a roughly three-foot length of 1/8th-inch ribbon or string. The longer the string, the longer the lizard. Three feet is a good start.

2. Fold the string in half so that the two ends meet. This will lead to a loop at the other end of the string.

3. Take the loop and run it through the bottom of a keychain clasp. Really, any sort of clasp will work. All you need to do is create a slipknot around the clasp. You should have your loop on one side of the clasp, and the long excess string on the other.

4. Pull the ends through the loop to create a slipknot. Reach into the loop and pull the strings through, pulling until tight. This creates a simple slip knot that will hold the lizard in place as you work.

5. Tape the clasp down to the table so that the strings drape towards you. Make sure the strings are not tangled up, and that you can clearly tell which string is the left string and which one is the right.

Method 2 Building the Head and Neck.

1. Add two beads to the leftmost string. These beads will be your body, so choose the color you want for the bulk of the lizard. Don't feed the beads all the way down; just let them dangle a bit towards the end. In this video, the body will be yellow.

2. Thread the right string through the beads the opposite way. If the leftmost string enters through the left, thread this one through from the right. You'll have both string going through the center of the two beads in opposite directions.

3. Pull both ends of the strings until the beads slide up to the keychain clasp. Lightly pull on the opposite ends to force the beads up to the top.

4. Feed three more beads -- two eyes and a body color -- onto the leftmost string. You want to sandwich the body bead with the two eye colors. Here, the eyes are green and the body is yellow, so you'd put them on as green, yellow, green.

5. Slide the right side through the beads and pull both ends until the beads slide to the top. Repeat the same procedure as you did with the first two body beads. Slide the three beads on the left string, thread the right through them, then pull both strings to move the beads to the top.

6. Repeat the whole procedure with two more beads to make the "neck." Take two body colors, thread them on the left, slide the right through, and pull tight. This is your neck.

7. Take three more body beads and pull them through. Again, it is the same procedure. For a little flair, you can use a different color for the center bead here, allowing you to put a "stripe" on your lizard's back.

These three beads are the beginning of the "back." You'll need to start the limbs after this.

Method 3 Building The Legs.

1. Set aside two beads for the body and three other beads for the feet. Here, the body beads are still yellow and the feet will be black.

2. Thread the two body beads on the left string and slide them down close to the body. Push them almost all the way to the body. These are your legs.

3. Slide the black beads on, just above the legs. Keep them close, but separated.

4. Thread the end of the left string through the two beads for the leg. You just want to thread through your two yellow beads, not the three for the feet.

5. Pull the string tight to pull everything together, adjusting slightly as necessary. Use your fingers to make sure nothing bunches up. This is your first leg! Note how it only requires the left string to make -- you should never touch the right one when making the left leg.

6. Repeat the process with the other string to make the right leg. Once done, it is time to move back to the body.

Method 4 Finishing the Body and Tail.

1. Build three more body rows identically to the first. Put three beads on the left string, remembering to alternate them if you're doing a two-colored body. Then slide the right string in the opposite direction as the left and pull the two ends to slide the beads up to the body.

You need three more rows before starting the feet again.

2. Make two more legs the same way you made the first two. After the three lengths of the body, add two more legs. The process is identical.

3. Add two more body beads, to make the base of the tail (identical to the neck). You should have the process down pat by now. Two beads on the left string, feed through the right string and pull tight.

4. Slide the first tail bead on the left string, thread the right string through the opposite side, and pull. The tail is simply the same process as the body, but its only one bead per layer. You can choose any color you want. Alternating looks great too, and you can use as many beads as you want for the length of tail you like.

5. Tie a double knot at the end of the tail to keep the beads in place. You can tie any knot you want, but a simple square knot will do just fine. You can use the knot used to tie your shoes as well, but make sure you double knot it.

Question : What can I do if I have lost 2 beads?
Answer : A good way to solve this without doing much damage would be to shorten the tail by two beads.

Question : What size beads should I use?
Answer : The best beads to use are pony beads. Pony beads measure about 6 by 9 millimeters, and the hole is about 4 millimeters.

Question : How can I give the lizard a longer nose?
Answer : After you secure the string to the clasp, you could first tie one bead on the string. Then you would make the lizard as explained in the article, which would give it a slightly longer nose.

Question : Can I use thread instead of string or ribbon?
Answer : Yes, you can use thread instead of string or ribbon, but I would just make sure your thread is thick enough that it won't break.

Question : What do I do if I run out of ribbon in the middle?
Answer : Undo your previous row of beads and attach new ribbon. Tie as small of a knot as possible. As a general rule, I use one inch of material per bead.

Question : What are the best beads to use for making a beaded lizard?
Answer : The best beads to use for making this are horse beads. This is because they are thick and are durable, you can buy them at any craft store or bead store.

Things You'll Need : Pony Beads (about 60), 1/8th-inch wide ribbon, Scissors, Beads, Tape, Nice flat surface (recommended).

Tips : You can mix and match colors and lengths with ease once you get used to the process. For a bigger lizard, add one bead to each smaller section (legs, head, neck) and two beads to each body section. This will keep the proportions roughly the same.

Januari 16, 2020

how to make a balloon pet

How to Make a Balloon Pet.

A balloon pet can be made in various ways, each making use of the balloon shape and then being decorated as you please. In each case, these little "companions" aren't meant to last long; they're just a fun toy or decoration for a short time.

Method 1 Blown up balloon pets.

1. Make a balloon pet using a blown-up balloon. There are lots of possibilities here, so this section will provide a few suggestions and you can experiment with your own as well.

2. Make a balloon dog. Choose a balloon in the color you'd like the dog to be, such as brown, white, black, grey or any other color.

Blow up the balloon with helium gas. Tie it into a knot, to keep the gas in place.

Draw floppy ear shapes onto two pieces of card. Color in (if needed), then cut these out. Attach using glue to each side of the balloon, at the non-knotted end.

Draw the face directly onto the balloon. Draw a kidney shape facing downward for the snout and draw a circle in the middle for the dog's nose. Draw large eyes above the snout and blacken them in.

Tie a string on the base. The dog balloon can now be played with or used as a party decoration.

3. Make a balloon fish. Choose an orange or yellow balloon for making the fish.

Blow up the balloon. You can use air or helium gas, whichever is easiest. Tie a knot in it, to keep the air in place.

Draw two fin shapes on orange or yellow card. Cut these out. Attach them with glue to the sides of the balloon, with the back of the fins facing toward the knotted end of the balloon.

Cut out a tail fin from the orange or yellow card. Glue over the knotted area of the balloon.

Stick on two large eyes made from card. Or, simply draw these on with markers.

The fish balloon is now ready for play or to be placed out as a decoration for a party.

4. Make a balloon puppy. This is a fun one for the kids to drag around with them, and is easier if you only have air rather than helium for filling the balloons.

Blow up the balloon. Tie a knot in it, to keep the air in place. (Air is best as it allows the balloon puppy to hover around the kid's feet as it is being walked.)

At the knot end of the balloon, create the dog's face. Draw a round nose just above the knot and blacken it in. Draw a smiling mouth (two semi circle arcs either side of the knot). Draw whisker dots above each smile arc (about four is sufficient).

Either attach floppy ears made from card, or draw them on the dog. They look more effective if made from card though.

Cut out a length of string or cord. Tie onto the balloon knot. This becomes the puppy's leash.

Allow the kids to take the balloon puppy for a walk.

Method 2 Water balloon pet.

1. Fill a water balloon with water.

2. Tie off the balloon to keep the water intact.

3. Decorate the balloon.

Draw a face on it. Use markers. If you want to stick on googly eyes, do so.

Stick on hair if wished. You can use strands of yarn stuck on with craft glue. If you would like a bow in the hair, cut one from paper and glue on.

Draw on any clothing or accessory features, if relevant. For example, a tie, or necklace.

4. Finished. The water balloon pet can be played with for a while.

Method 3 Balloon stress relief pet.

1. Make a stress relief pet that will last a little longer than the other projects suggested in this article. This "pet" can be held in the palm of the hands and squeezed to reduce tension and exercise the hand muscles.

2. Choose a balloon color. Any color is fine, these "pets" can be all colors of the rainbow.

3. Stretch the open end of the balloon a bit. Stretch it back and forth to make the opening a little looser. This will help placing the filling inside.

4. Funnel in the filling for the balloon. This can be either sand or play dough, depending on your preference. Kids tend to like the play dough because it can be shaped into all sorts of funny configurations that keep their shape after molding.

5. Knot the balloon. Ensure that the sand or play dough do not come into the neck area of the balloon; if you have overfilled it, remove some of the filling, to allow you to tie a knot in the balloon.

6. Decorate the balloon pet. Draw eyes, a smile, a nose, freckles, etc. It's fun to let the kids do this for themselves, as they can style the face in their own way.

7. Add hair. This step is optional but can make the pet look funnier. Add small spikes of yarn to the knot end of the balloon; glue to attach. Keep these pieces short, so that they stand up.

8. Done. The balloon pet is now ready for play or stress relief.

Method 4 Balloon animal from balloon art.

1. Make a balloon pet using balloon art twisting techniques. There are many different animal shapes that you can make using this technique, allowing you to have a whole menagerie of balloon pets if wished.

Question : Mine is ugly. How do I make it pretty?
Answer : Experimenting with different faces and designs can help you to make this craft your own. If you're not happy with how it looks the first time, try making it again in a different color or with a different face. Remember, practice makes perfect!

Tips.

Dispose of used balloons thoughtfully. They should be encased inside your normal trash, so that animals cannot find the balloon remains and eat them. Balloons inside animals can kill if they get wrapped around internal organs or cause blockages.

Things You'll Need : Balloons, Markers, Decorative elements, Scissors and glue, Card, String or cord, Sand or play dough as filling.

Januari 15, 2020

how to creating a paper cartoon puppet dino

How to Creating a Paper Cartoon Puppet Dino.

With the right supplies and a bit of time, you can make your very own paper dinosaur that stands or moves. If you'd like a bigger craft project, you could even attempt a paper mache dinosaur or an origami dinosaur! Depending on the colors that you use, you can make your dinosaur look realistic or cartoonish.

Steps.

1. Glue a sheet of green construction paper to a piece of thin cardboard. This will make your dinosaur nice and sturdy. If you don’t have any green construction paper, paint the cardboard with green acrylics or poster paint. Let the glue or paint dry before moving on.

The thin cardboard from cereal and snack boxes works great for this!

If you don’t have thin cardboard or construction paper, try green cardstock instead. You can also use poster paper, but you’ll need to paint it.

2. Draw and cut the body, head, tail, and leg shapes from the paper. Look up coloring book or cartoon pictures of long-necked dinosaurs, then break it down into separate body parts. Draw these separately with a pen or pencil, then cut them out. Here are the basic shapes you’ll need.

A long stem with an oval-shaped head, like a brontosaurus or apatosaurus.

A long, tapering tail, like a skinny triangle.

2 rectangular legs.

A mound- or lump- shaped body, like a semicircle but with rounded bottom corners.

3. Make spikes for the dino's back using paper and cardboard if desired. Glue the paper to the cardboard first (or paint the cardboard). Let the paint or glue dry, then draw 4 to 5 triangular spikes. Cut them out, then set them aside.

Use a different color of paint or paper for this. Orange is a great choice, but a lighter or darker shade of green will also work.

You can also make smaller rectangles for nails.

4. Use a pen to poke a hole in the ends of each limb. Make the holes 1⁄4 to 1⁄2 in (0.64 to 1.27 cm) away from the center of each edge. A pen or pencil will work just fine for a cardstock dino, but if you used thin cardboard, use a nail to make the holes instead.

You’ll need holes in the following areas: base of the neck, base of the tail, and the top of each leg.

Don’t use a hole punch. The hole will be too big and the brad will fall through.

If you're a child, ask an adult to help you with this step, especially if you're using a nail.

5. Poke 4 holes in the body so that you can secure the limbs. Make 2 holes along the wider, flatter, bottom edge of the body. Poke another set of holes on the sides of the body for the tail and legs. As with the limbs, make the holes 1⁄4 to 1⁄2 in (0.64 to 1.27 cm) from the edges.

Don’t poke the neck and tail holes too close to the top; make them closer to the bottom so that your dinosaur has a humped back.

Don’t place the legs too close together. Keep them closer to the bottom corners of the body.

6. Use brads to secure the limbs behind the dinosaur's body. Stick a brad through the front of the neck hole on the body. Slide the neck piece onto the back of the prong, behind the body. Pry open the back of the brad, then press the prongs flat against the back of the dinosaur.

Repeat this step for the tail and both legs. Always add the limbs to the back of the body, not the front.

Make sure that the limbs are facing up as well, otherwise your dinosaur won’t match!

Brad prongs can hurt if they get under your nail. Consider using a butter knife to pry them apart.

7. Glue the spikes to the back of the dinosaur. Flip the dinosaur over so that you can see the back. Draw a line of glue along its back, then add the triangular spikes. Make sure that the flat bases are touching the dinosaur's back while the pointy tips are sticking out.

If you made nails for the dino, glue them to the bottom of each leg.

White school glue and glue sticks will work just fine for this. Hot glue is not recommended because it's too bulky.

8. Give the dinosaur a face. Here is where you can get a little creative. For a simple dinosaur, use a black marker to draw an eye and mouth. For a fancier dinosaur, use hot glue or white school glue to attach a googly eye to the dinosaur's face.

Give your dinosaur more character by adding eyebrows or eyelashes.

Tips.

Your dinosaur doesn't have to look realistic at all. You can even make it pink and blue!

Look up pictures of cartoon dinosaurs. They have simpler shapes, which are easier to copy to your paper.

Things You'll Need.

Green construction paper, Orange construction paper, Glue stick, Thin cardboard, 4 brads, Pen or nail, Scissors, White school glue (optional), Googly eye (optional).

Desember 25, 2019

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make a paper dog

How to Make a Paper Dog.

There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!

Method 1 Folding an Origami Dog.

1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.

If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.

2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.

Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.

3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.

It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.

4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.

There should be an “X” formed by the creases on the unfolded piece of paper.

5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.

Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.

6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.

Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.

You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.

7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.

There should be an open triangle when you look down at your square.

8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.

Leave the top and bottom flaps in place and don’t do anything to them at this point.

This fold will eventually become the dog’s tail.

9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.

Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.

10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.

At this point in the folding process, you’re making the dog’s head and legs.

11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”

The bottom edge should be in line with the ground if you were to pretend to stand it up.

12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.

Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.

13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.

The crease line creates a jawline for the dog.

14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.

Once you get the hang of the pattern, you can make an origami dog in just a few minutes.

Method 2 Creating a Dog Head.

1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.

If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.

2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.

To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.

3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.

Take your time when making your folds and line up the edges neatly.

4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.

You’ll use the center crease as a guide for your future folds.

5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.

Keep the fold lined up with the center crease to create a proportional face.

6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.

When you look down at your paper, you should see a very angular-looking dog head.

7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.

If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.

8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.

You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.

Method 3 Making a Hand Puppet.

1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.

Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.

2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.

Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.

3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.

If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.

4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”

The top and bottom sections are where you’ll place your fingers to make the puppet talk.

5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.

For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.

6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!

To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.

Tips

Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.

If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.

Things You’ll Need.

Origami paper, Marker, Origami paper, Marker, Construction paper, marker, Scissors, Glue stick.

Desember 19, 2019