How to Make a Dinosaur Tail

How to Make a Dinosaur Tail.

A dinosaur tail can be used in a Halloween costume or be a new accessory for a dress-up game. Best of all, this fun, brightly-colored tail only takes 1-2 hours to make. If you’re familiar with a sewing machine, you can stitch your dinosaur tail together. For a quicker assembly, you can use hot glue. It only takes a few pieces of fabric and some fiber stuffing to take your child’s imagination to the next level!

Method 1 Creating a No-Sew Dinosaur Tail.
1. Cut a series of triangles into a long strip of fabric. Snip out a line of connected triangles from the strip. The total length of the strip should be 24 inches (61 cm) by 2 inches (5.1 cm). When you’re done, the felt should look like a miniature mountain range. Set this aside for later.
This strip will become the spikes of the dinosaur tail, so feel free to pick a bright, fun color!
When flattened, the fabric will look like a row of diamonds. This will be fixed later on when the spikes are folded and glued together.
Use fabric scissors for a quicker and smoother cut.
2. Trace the edge of a bowl onto the main fabric and cut it out. Flip over a bowl and trace its circumference onto the felt. The diameter of the bowl will be the width of your dinosaur tail, so make sure that it’s wide enough.
3. Cut out 2 strips of fabric for the waist straps and glue them in place. Use fabric scissors to cut 24 inches (61 cm) by 2 inches (5.1 cm) rectangular strips from the tail fabric. Then, fold in the edges lengthwise and glue them into place. Fold the fabric in half again and glue both sides together so the straps are less than 1 inch (2.5 cm) thick.
4. Crease and glue the line of fabric spikes together. Use short lines of hot glue to connect the folded spikes. Instead of looking like a row of diamonds, the felt will now look like a row of triangles.
5. Cut a large, curved triangle out of fabric to make the base of the tail. Measure out a curved triangle along the edge of a folded piece of fabric. You don’t have to use specific measurements, but make sure that the tail will fit around your circular piece.
6. Attach the spikes to the inner seam of the tail with hot glue. Use small lines of hot glue to connect the felt spikes with the outer edge of the tail. Apply glue on both sides of the spikes, as this piece will hold the tail together. Put pressure on the glued areas with your fingertips to secure the spiked tail into place.
Use additional glue at the pointy end of the tail to provide extra support.
Add extra glue as needed to connect the rest of the tail together.
7. Put fiber stuffing into the tail until it’s fully stuffed. Take a bag of fiber filling and stuff the tail completely. Place as much or as little stuffing as you would like inside.
Make sure that the pointy end of the tail is completely filled before continuing to stuff the rest.
8. Glue the waist straps and circular piece to the inside of the tail’s base. Take the waist strips and glue them on opposite ends of one another, using small lines of hot glue. These straps should be perpendicular to the line of spikes. Make sure that the circular base is glued snugly over the waist straps and is covering the end of the tail.
You can tie the waist straps together to secure the tail when your child wears it.

Method 2 Cutting and Sewing a Tail Shape.
1. Fold the fabric in half and mark 12 inches (30 cm) above the crease. Take 1 yard (0.91 m) of fabric and fold it in half horizontally. Use a tape measure (preferably non-mechanical) and mark 12 inches (30 cm) above your starting point on the fold. This indicates the height of your dinosaur tail.
Make sure that your measuring tape expands to at least 3 feet (0.91 m).
2. Make a second mark 24 inches (61 cm) down the fabric. Measure 24 inches (61 cm) from your starting point and mark the fabric. This 24 inches (61 cm) distance will serve as the length of your dinosaur tail.
Make sure that you have enough fabric for these measurements.
3. Make a third mark 2 inches (5.1 cm) above the second mark. Take your measuring tape and make a dot 2 inches (5.1 cm) above the second mark. This third measurement represents the pointy, bottom end of the tail.
4. Connect the 3 marks with a marker and cut out the tail shape. Use a fabric marker to sketch the line that connects these three points before removing the piece with scissors or a rotary cutter. Rotary cutters can be found at most craft stores, and provide a more even and exact cut along the edge of your fabric.
If you want to make your lines exact, use these measurements to sketch and cut a template out of cardboard beforehand.
5. Trace a plate on fabric twice to create 2 circles for the tail’s base. Place a ceramic plate onto the fabric and cut around it with scissors or a rotary cutter. Repeat this process so that you have 2 circles. The diameter of this circle will be the width of your dinosaur tail.
Use folded fabric if you want to cut 2 circles out at once.
6. Measure and cut out 2 pieces of fabric to create the waist straps. Use a measuring tape to mark and cut out 2 strips of fabric. The length should be 12 inches (30 cm), and the width should be 4 inches (10 cm).
These strips will help attach the dinosaur to a child’s waist.

Method 3 Adding the Spikes and Waist Straps.
1. Sketch a series of triangles onto a piece of felt using a fabric marker. Use a ruler or measuring tape to sketch a row of triangles onto the felt. Make the triangles, which will be the tail spikes, about 2 inches (5.1 cm) tall and 2 inches (5.1 cm) wide. Ensure that there’s 0.5 inches (1.3 cm) between each spike.
You can make the spikes bigger or smaller, depending on how you want the tail to look at the end.
You can also make individual triangular spikes.
2. Arrange the cut spikes on the edge of the tail fabric and pin them in place. Use fabric scissors to cut the spikes out of the felt. Begin constructing your dinosaur tail by positioning the trail of spikes between the folds of the base tail fabric. Pin the spikes so that they face inward, as you will be sewing the fabric from the inside out.
3. Use a sewing machine to attach the spikes to the main fabric. Feed the fabric through the machine to stitch the base tail fabric and spikes together. Go along the curved shape of the tail, leaving less than a 0.5 inches (1.3 cm) of space between the stitches and the fabric’s edge.
Pinch and tug on the fabric on the inside of the tail to pull the tail right side out.
Remember to remove the pins from the fabric as you sew.
4. Fold and pin the waist strap fabric at the ends before sewing the edges together. Crease the fabric along the center so that the short ends are touching, and use a few pins to secure the fabric in this position. Stitch the edges together lengthwise, but leave the shorter end open. Pinch the fabric on the inside of the stitching to pull the straps right side out.
You’ll be stitching the shorter, unsewn ends of the waist straps into the base of the tail.
5. Stitch the Velcro rectangles to the straps and attach the waist straps to the tail. Take a small rectangle of Velcro and place it on the sewn end of the waist strap before stitching it into place with a sewing machine. Then, take the unstitched ends of the waist straps and pin them to the inside of the tail. Make sure that the straps are placed perpendicular to the spikes before sewing them into place. Check to see that the strap is long enough to wrap around a child’s waist. Pin the straps onto the tail and sew them into place.
You can purchase Velcro at a craft store.
You can also sew Velcro by hand.
6. Pin the base circles along the edges and stitch together. Take the 2 base circles and secure them with pins along the edges. Make sure that the circles are centered against one another before you sew them together.
Leave at least 1 inch (2.5 cm) of space to turn the circle right side out.
After sewing the edges together, pinch and tug at the inner fabric of the circle to make pull it right side out.
7. Fill the tail with stuffing until it has a firm shape. Take fiber filling and stuff the base of the tail. Use as much fiber as you need to completely fill the dinosaur tail.
You can buy fiber filling at a craft store. You may need more than one bag to fully stuff the tail.
8. Use a ladder stitch to close off the base and complete the tail. Tuck and fold the excess fabric into the tail before sewing it shut with a ladder stitch. This part can be completed by hand.
The ladder stitch helps all portions of stitching to look uniform.

Tips.
Iron your material beforehand to remove any wrinkles. Take an iron and apply heat to your fabric in long, even strokes. Loosely woven fabrics like cotton and linen are great options to make a dinosaur tail, or you can opt for satin if you want a shinier look. Check the care label on your fabric to ensure that it can be ironed before you proceed.
Things You’ll Need.
Creating a No-Sew Dinosaur Tail.
Fabric.
Felt.
Bowl.
Fabric marker.
Hot glue gun.
Hot glue sticks.
Scissors.
Cutting and Sewing a Tail Shape.
Fabric.
Measuring tape.
Fabric marker.
Scissors.
Rotary cutter (optional).
Plate.
Adding the Spikes and Waist Straps.
Felt.
Pins.
Sewing machine.
Scissors.
Small Velcro rectangles
Fiber stuffing.
Measuring tape.
Fabric marker.
Sewing needle.
Thread.

Maret 21, 2020

how to make a small penguin christmas ornament

How to Make a Small Penguin Christmas Ornament.

Make a small penguin ornament suitable for hanging on a Christmas tree.



Steps.

1. Cut out the body, cut 2 pieces. Attach the white belly to the body using one strand of black embroidery floss folded in half. Knot the end just like sewing with thread. Refer to the picture in the same area you find the pattern.

2. Place the blank sides together. Sew the body together with black sewing thread, leaving the bottom open to turn and stuff later. Keep your stitches small and as close to the edge as possible without missing any areas. Turn the ornament right side out and check for any missed areas.

3. Stitch the hat together wrong sides together, then turn right side out. The hat base (the white square) fold into a long square then sew together with white sewing thread making a circle. Turn that right side out and glue that to the bottom of the hat. A hot glue gun is recommended it seems to stick a little better, but be careful of your fingers. Also, using hot glue, attach the pompom to the end of the hat. This is the reason his hat is flat at the tip, to accommodate for the pompom.

4. Take two small eyes and glue to the top of his belly part. Use just craft glue for this.

5. Fold the beak into a triangle (in half) and using the hot glue, glue the beak just below his eyes. Again, be careful with the little pieces.

6. Glue the finished hat onto his head with the hot glue. You can also put some fiberfill (stuffing) into the hat for body, before you glue it.

7. Cut a 12" by 1/2" strip of felt (of whatever color you'd like), and tie that around his missing neck above his arms and below his face. You might want to experiment with the width and length of the scarf. You can also cut the ends in strips to make a little fringe. Tie that around him, you might want to glue a small section of the back down, as well as underneath where it's tied just so it doesn't come apart. He'll catch cold if he doesn't have his scarf on.

8. Stuff his body to the desired girth you'd like him to have. Sew up the bottom.

9. Attach thread or ribbon to the back. The form is up to your own creative wishes.

10. Embellish it. For example, glue snowflake to his hat, and place a present in his hand.

11. Finished.



Tips.

Decorate as you see fit.

Change colors of the hats, scarf, etc.

Warnings.

If you use a hot glue gun, please supervise children.

Things You Need.

Felt (black for the body, white for the belly, a goldfish yellow color felt for the beak, red and white again for the hat and color of your choice for the scarf.)

Black embroidery floss, separated into strands, e.g. DMC #310.

Small googly eyes.

MM eyes.

A small white pompom.

Februari 10, 2020

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020

how to make a clay bird

How to Make a Clay Bird.

Using clay of your choice, shape a little clay bird with basic features and style. It's a good beginner's clay project, to get you used to shaping a figurine with clay and making basic design indents.

Steps.

1. Start with a clay lump that fits snugly in your hand. Mould it in your hands until you get a ball, then put it on the table. Carefully push down to flatten the bottom, without making holes in the ball with your fingers.

2. Form a ball that is a bit smaller than a ping pong ball. Include a little extra in case (for the neck). Put the head on top of the body at an angle then smooth it in with your fingers and some water. Use the extra to make a neck. To get this part right, it is suggested that you keep a picture of a bird in front of you.

3. Take a small rectangle of clay and put it opposite the head for the tail. Smooth it in, in the same manner as you did with the head.

4. Add some detail. For the beak, just locate the right place and put on a little bit of clay and smooth it in, then use a toothpick to shape the beak. Easy.

5. Take a clay oval and smooth it onto the body. Use a toothpick and your fingers to shape it. Do the same on the other side to make wings.

6. Widen the tail at the end by lightly flattening and pushing into the clay. Make some ruffles by adding and smoothing in some clay strips the length of the tail.

7. Add eyes if you want.

8. Check that there are no cracks, as these weaken it when it's dry. If there are any, smooth them out with water and your fingers.

9. If you want your clay bird to be hollow, make a hole in the flat side that goes to a bit before the edge. Carefully spoon out the clay, being careful at the head. Don't hollow out the tail.

10. Leave to dry. If wished, you can paint the bird or add clear varnish.

Follow the instructions on the clay packaging to determine how best to dry the clay; some clay requires baking, while some clay can air dry.

Question : How do I make a clay unicorn?
 Answer : Use your imagination. Look up pictures of a unicorn. If you know how to make a clay horse, do this and add a horn.

Question : How much is white clay? Where can I buy it?
 Answer : The price of white clay varies depending on where you live and what store you buy it from. You can get it at a craft store or you can order it online.

Question : How do I make a tail?
 Answer : For a bird tail, make a small, thick cone-shaped triangle, and round the tip. For the ruffles, flatten some clay and stick it to the tail. Repeat as necessary.

Tips.

Modeling clay can be found in toy, hobby and department stores. It can also be purchased from online retailers.

Things You'll Need.

Modeling clay (air-dry or bake styles are both fine).

Toothpicks.

Small spoon.

Clay sculpting tool (optional but helpful).

Januari 21, 2020

how to make a bird nest

How to Make a Bird Nest.

A bird's nest makes a wonderful mantelpiece decoration, and can make use of almost anything you find along a nature hike, or in your front yard. Wild birds usually prefer to make their own nests, but you can lure many species to your yard by leaving the right materials outside, or building a nesting box.

Method 1 Building a Decorative Nest.

1. Find long, flexible plant stems. These will form the main shape of the nest, and are much easier to work with than hard, short twigs. You can use straw, long grass, vines, willow fronds, bendy reeds, or seagrass found outdoors or at a garden supply store. Raffia is another good option, obtainable from a craft supply store.

If Mexican feather grass grows in your area, grab a clump of it and pull your hand upward to remove a handful of hairy seeds clinging together. Once you have enough seeds, clump them into a ball and make a nest shape by sticking your thumb into it.

2. Bend the stems into a loop. Grab a thick handful of the stems, and bend them into a U shape, adding more stems if necessary to form a full circle. Tie it in place using a piece of string or florist wire. If the plant stems have many little leaves, or if they're wiry and dry, you can even weave them together without using any attachment.

If tying the nest together is too hard, you can clip them temporarily in place while waiting for glue to dry. Don't use glue if you plan to keep the nest outdoors.

If your fresh-cut plants won't stay in position, try hanging up the bundle in a windy area to dry for 24 hours. Some plant stems are easier to bend when fresh, but grasses and straw benefit from drying.

3. Shape the rest of the nest. Grab a second, smaller handful of stems and shape it into a smaller loop. Wedge this inside the larger loop and push it downward to form the base of the loop. Depending on how well the stems fit together and how sturdy you want the nest to be, you may need to use a thread  or glue to fasten the two loops together.

4. Decorate with scavenged materials. Real birds sometimes spend days collecting bits and pieces to build a nest. Hopefully you're a little faster, but you can still have fun gathering objects from nature or your craft boxes. Here are some ideas to get you started:

If you plan to leave the nest outside, only use materials found outdoors, and nothing that could hurt an animal.

Feathers and pieces of eggshell fit the theme. Be aware that collecting most wild feathers is illegal in the United States, but they are mostly harmless from a disease perspective.

Look for twigs, leaves, bark, and moss in interesting shapes and colors.

If the nest is for indoor decoration, you can use bits of string, colored paper shreds, and confetti.

5. Place eggs inside (optional). Finish your art project by placing eggs or fake eggs inside the nest. You can quickly add marbles or colorful pebbles, or hollow out real eggs, decorate them, or even carve them if you have the right tools.

Things You'll Need.

Any long, flexible bundle of stems, grass, or straw, String, florist's wire, or glue (recommended unless stems interweave easily).

Moss, bark, twigs, or other decorative materials, Eggs and egg-blowing materials (optional), Marbles, pebbles, or other "fake eggs" (optional).

Method 2 Attracting Wild Birds to Nearby Nests.

1. Look up the nesting habits of local birds. Find a local wildlife guide at a library or bookstore, or search online for information on local birds. Choose one or more species you want to attract, and look up their nesting habits to discover what shape and style of nest will be most effective.

If you live in North America, NestWatch is an excellent resource for nesting information, and one you can expand with your own data.

2. Leave nesting material in your yard. This is an easy way to attract birds, and might be worth it even if you end up building a full nest as well. If you managed to find specific nesting information, you'll know what materials to leave, but you can't go wrong with a few items from the following list, left in visible locations:

Rigid twigs (for platform nest species) and flexible ones (for cup nest species).

Yard clippings such as dry grass and straw, bits of bark and moss, dead leaves, etc.

Human or animal hair or fur (no longer than 6 inches / 15 centimeters).

Yarn or string.

Mud, spiderwebs, and/or caterpillar cocoons to help birds bind nesting materials together.

Never leave out materials that have come into contact with harsh chemicals, including dye, pesticides, or anti-flea treatments. Dryer lint and clothing rags are not recommended.

3. Provide a variety of plants. If you want to attract birds that make nests in existing holes, leave dead tree stumps and fallen logs in the yard. Living trees and bushes will attract more visible nests from other species, especially if the plants are native to your area. For best results, plant a "staircase" of grass or moss, flowering perennials, shrubs, and trees.

4. Build a nesting box. If there aren't obvious crevices or hollows in your yard, building a nesting box or birdhouse is a simple carpentry project. Make sure the birdhouse is constructed to match the size of the birds you want to attract, or the size of the birds you see flying near your home.

For a higher chance of success, follow birdhouse building instructions specific to common North American species.

Clean out the birdhouse regularly whenever birds are not nesting.

5. Make a bird's nest. Many birds prefer to make their own nest rather than move in to a ready-made one. Lining natural hollows with the nesting materials listed above may give a bird an attractive head start. If you want to make a different type of nest, such as a cup or platform nest, it's best to follow the specific habits of the bird species you want to attract. Each species tends to prefer certain materials.

Placement of the nest is also important. Many bird species hide their nest amidst thick branches, but some prefer more open branches, bushes, or open patches of ground. Look for more information on NestWatch, through online searches, or in a local bird nest identification guide.

Things You'll Need.

Any yard clippings, especially twigs and grasses, String or yarn, Mud, spiderwebs, or caterpillar cocoons.

Human hair or animal fur, Small amount of lumber and nails (to build a nesting box, if hollow logs not available).

Question : Where do you get all the supplies?
Answer : You can find the necessary items on the ground in a park or wooded area, perhaps even your back yard!

Question : How do I make the nest big?
Answer : You can use longer sticks that are pliable enough to bend. Just make sure not to break them.

Question : What if I live in the city?
Answer : If you live in the city and want to attract birds, put up bird feeders. Birds love cracked corn, nyjer seeds, black oil seeds, fruits, and millet. Just make sure to take measures to keep the squirrels out.

Question : Am I allowed to take care of a wild baby bird if its mother is away and it's storming outside?
Answer : No. Leave the baby bird alone. Its mother will come back for it. Wild animals can take care of each other and themselves, they very rarely need our help. The bird will be fine in the storm.

Question : How do I make a bottled nest box?
Answer : Just take a milk bottle (not glass) and make an opening in the body of the box. Then take a rope and make holes at the top and tie the rope to the holes. Make sure you make it tight.

Question : Can I hatch the eggs myself?
Answer : If it is a wild bird egg do not touch it. In the USA it is illegal to take care of wild birds.

Question : Can I look at the eggs when they have been laid?
Answer : You can take a peek, as long as the mother bird is not nearby. Make sure you don't touch the eggs, as you will leave a scent behind that the mother bird can detect.

Question : Are most bird nests made of straw, twigs, and mud?
Answer : Yes, that is what a typical bird nest is made of.

Question : What can I do about wild animals that eat the eggs?
Answer : It depends on the animal. For squirrels, you can't really do anything, but for other birds you can find a better spot to put the nesting box. You shouldn't worry too much, because the mother bird will protect it's young with her life.

Question : Can I make a bird nest from leftover grass from a lawn mower?
Answer : Lawn clippings are probably too short to make a decent nest. Maybe if you collect it and dry it out you can use a few pieces to line the nest.

Tips.

For a quick and easy nest, shred or cut a paper bag into thin strips. Line a bowl with a paper towel, arrange the strips over them, then glue the paper bag strips together and let dry into a nest shape.

It’s fine to take a look at the eggs, but be careful, because smart animals like coyotes can follow you to the nest. If you have no predators in the area, taking a look at the eggs will leave a scent, but birds don’t have a sense of smell.

Warnings.

If a wild bird moves in to your nest, don't disturb it or the surrounding area. Watch the nest from somewhere the bird can't see you, or you may scare the bird away or attract predators to the nest.

Januari 20, 2020

how to make a ball

How to Make a Ball.

Balls provide endless entertainment for kids and adults alike, so make your own if you want a fun toy to play with this weekend. But there are balls for other occasions, too. If you’re having a rough week, for instance, create a stress ball to squeeze when you just want to scream. Or get creative and make balls out of things like rubber bands, fabric, and even cheese!

Method 1 Making a Bouncy Ball.

1. Combine school glue, cornstarch, and any add-ins in a bowl. Stir together the 1 tablespoon (15 ml) of school glue and 1 tablespoon (15 ml) of cornstarch until they’re thoroughly combined, using a spoon or wooden stick. If you want to add any extras, like food coloring or glitter, do so now.

You can use either white or clear school glue. If you use white glue and don’t add any coloring, your ball will be white.

Fun Add-Ins for Your Bouncy Ball

Sprinkle in glitter for a little extra sparkle.

Squeeze in a few drops of food coloring to make a ball in your favorite hue.

Stir glow in the dark paint into the glue for a ball that can be used at night.

Swirl 2 colors of food coloring together if you want a multi-colored masterpiece.

2. Stir warm water and Borax together in a separate bowl. Mix 2 tablespoons (30 ml) of warm water and 1⁄2 teaspoon (2.5 ml) of Borax until the Borax is completely dissolved. Stir vigorously to ensure there are no clumps of powder left in the bowl.

Heat the water in the microwave or on the stove until it’s warm to the touch. It shouldn’t be boiling.

You can find Borax in the laundry aisle of a store.

Borax is safe to use, but it's poisonous if ingested in large quantities. If you or your child get it in your eyes or mouth, contact poison control immediately.

3. Add 1⁄2 teaspoon (2.5 ml) of the Borax mixture in the bowl with the glue. Do not stir the ingredients together when you add them. Simply pour the Borax and water into the other bowl containing the glue and cornstarch.

Set aside the remaining Borax mixture if you plan on making more balls.

4. Let the mixture sit for 15 seconds. This allows time for the Borax to react with the glue, making the polymers of the glue link together which will create the ball shape. If you start stirring right away, the bouncy ball may not form or harden properly.

Set a kitchen timer or use the clock app on your phone to keep track of the time.

5. Use a spoon to combine the ingredients until they’re too thick to stir. Within 1 to 2 minutes, the mixture will thicken. Stir vigorously while the mixture is still liquid to make sure the ingredients are blended well.

Choose a sturdy spoon, like a metal or thick plastic one. Something flimsy, like a plastic spoon, will likely break off in the goo.

If you’ve made homemade slime with Borax, this process is very similar.

6. Remove the mixture and roll it between your hands to form a ball. Once the mixture is too thick for your spoon or stick, pull it out of the bowl and place it between your palms. Roll it around by moving your hands in circular motions until the ball is no longer sticky.

The more you handle the ball, the more firm it will become.

If you’re having trouble getting rid of the stickiness, dip the ball in the Borax water, then roll it a little more. This should remove any tacky texture.

7. Let the ball harden for about 10 to 20 minutes before you use it. This dries the ball a little more, so that it’s extra bouncy. If the ball starts to flatten while it sits, simply roll it back into shape when you’re ready to play with it.

Once you’re done playing, store the ball in an airtight container to prevent it from drying out. Keep it in a cool, dark place, like the pantry.

If stored properly, your ball could last for up to 6 months. It won’t go bad, but it will dry out eventually.

To make more bouncy balls, mix up another batch of glue and cornstarch and use some of the leftover Borax and water mixture.

Things You'll Need.

2 tablespoons (30 ml) of warm water, 1⁄2 teaspoon (2.5 ml) of Borax, 1 tablespoon (15 ml) of school glue, 1 tablespoon (15 ml) of cornstarch.

Spoon or wooden stick, 2 cups or small bowls, Food coloring or other add-ins (optional), Airtight container (optional).

Method 2 Creating a Paper Soccer Ball.

1. Trace 20 hexagons on white paper, then cut them out. Draw your hexagons on the paper with a template, making each side the exact same length. Use scissors to carefully cut along the traced shapes, then set them aside.

If you want a life-sized soccer ball, make the edges 2 inches (5.1 cm) long.

To make a template, use a ruler to draw the hexagon shape on a piece of cardboard. Cut it out and trace around it with a pencil to make each paper hexagon.

Cardstock is the best type of paper to use for this craft. It’s sturdy enough to hold the shape of the ball yet still easy to fold.

2. Trace and cut out 12 black pentagons with sides the same length. The edges of the black and white pieces need to be equal so that they fit together properly. Use a template to draw your pentagon shapes, then cut them out with scissors.

For example, if you’re creating a life-sized ball, make your pentagon sides 2 inches (5.1 cm) long.

You can use a different color paper instead of black, or get creative and make a multi-colored ball with a variety of shades.

Cut a pentagon template out of cardboard to trace on the black paper so that the pieces are all equal size.

3. Fold up a thin border around each hexagon and pentagon. This edge will allow you to build your ball seamlessly, so there are no gaps between pieces. You only want to fold enough of each edge to have a place to apply glue or tape. Keep the border size equal on each piece so they all remain the same size after folding.

To fold the same border on each piece, trace the border before you fold, using a ruler to ensure each edge is an equal width.

Use a straight edge, like a ruler, to help you fold the edges in a perfect line.

If the edges are crooked, re-fold them. They have to be straight for your ball to be the right shape.

To make folding easier, snip off the corners of your border before you fold. This allows you to fold the edges up without dealing with corners that crumple up or stick out.

4. Apply glue or tape to the folded edges of each piece. This is how you’ll stick the the pieces together to form the ball. Swipe glue on each of the edges of all the hexagons and pentagons. You can also use a strip of tape on the edges instead.

A glue stick will work better than liquid glue to prevent the paper edges from getting soggy.

If you are slow at putting the ball together, you may want to apply the glue as you go, rather than all at once. Otherwise, it will dry out on the final pieces by the time you get to them.

5. Attach 5 white hexagons to 1 black pentagon. On a standard soccer ball, each black piece is completely surrounded by white pieces. Press 1 white hexagon onto each edge of a black pentagon. Hold the edges together until the glue dries.

If you’re using a glue stick, the glue will dry almost instantly. Wait about 5 to 10 seconds while pressing the edges against one another.

6. Continue gluing the pieces together in this pattern, forming the soccer ball. On the other edges of the white hexagons that you attached to the original pentagon, glue more black pentagons. Don’t forget to glue the white edges that touch each other, too. Once you connect all of the pieces, you’ll have a ball shape.

A black piece should never touch another black piece. However, white edges will touch other white edges.

If you’re having trouble visualizing the pattern, look up an image of a soccer ball online as a guide.

You can stuff the ball with shreds of paper if you want to create a fuller shape.

Things You'll Need.

Black and white sheets of paper, Scissors, Cardboard.

Pencil or pen, Glue stick or tape, Homemade Stress Ball, 12 in (30 cm) latex balloon.

Method 3 Using Play Dough for a Homemade Stress Ball.

1. Use your hands to roll play dough into a long shape. Place a pile of play dough on a flat surface, then gently roll it out with the palms of your hands. This should form what looks like a snake.

It doesn’t matter what color play dough you use, since it will just be going inside the balloon.

Buy pre-made play dough or make your own at home.

If you buy play dough, use one 5 oz (140 g) container per balloon.

2. Insert the play dough into the balloon. Stretch the neck of the balloon open as wide as you can, then stuff the play dough snake into the balloon. The play dough should fill the balloon just to the base of the neck.

If there is a lot of empty space in the balloon, add more play dough.

Stretch out the neck of the balloon before you insert the play dough to loosen it up.

This step is easier if you have someone else hold the balloon open while you put the play dough inside.

3. Tie a knot in the neck at the top of the balloon to secure it. This will keep all of the play dough inside the balloon. Wrap the neck around your finger to make your knot, tying it as tightly as possible.

If you want extra protection, you can place your original balloon inside another empty balloon before tying it shut. This adds a double layer in case you poke a hole.

You can decorate your stress balls with permanent markers if you’d like. For example, you could draw a funny face or write a calming phrase, like “just breathe.”

Things You'll Need.

Permanent marker (optional).

Method 4 Forming Other Types of Balls.

1. Build a rubber band ball for a creative way to store supplies. Instead of tossing your rubber bands in a drawer, keep them together in 1 big ball. Fold up a thick rubber band to form the center, then begin wrapping all of other bands around it. Criss-cross directions often to round out the ball.

You can also wrap your bands around a bouncy ball or crumpled-up piece of paper for a larger ball.

Start with smaller rubber bands, then add the larger ones as the ball gets bigger.

2. Sew a fabric ball if you want a soft toy for kids or pets. Young children, particularly babies, could get injured by hard rubber balls. Instead, stitch together a ball out of strips of fabric, then stuff it with polyfill for a plush feel or use dried beans for a bean bag texture.

This also makes a great pet toy for dogs to chew on or for cats to bat around. If the ball is for a pet, pick a durable fabric like vinyl or nylon and keep your pet in sight as it plays with the ball.

You can use a sewing machine to make your ball or sew it by hand.

Cotton is ideal for kids’ toys since it’s a long-lasting and soft fabric that’s easy to wash.

3. Use ice to make a ball for a unique cocktail add-in. Not only do ice spheres look much cooler than regular cubes floating in your drink, they also melt slower, so your beverage doesn't get watered-down as quickly. Fill a silicone ice ball mold with water, then place it in the freezer for at least 6 hours, or until the balls have set and hardened.

For extra flair and flavor, add things like fresh herbs or edible flowers into the water in the mold before it freezes.

You can buy ice ball molds from a kitchen store or online retailer.

4. Make a cheese ball if you’re having people over for dinner or a party. When it’s your turn to play host or hostess, whip up a cheese ball as an impressive appetizer. Mix together cream cheese and other soft cheeses, shape it into a ball, then chill it in the refrigerator. Roll it in chopped nuts and other garnishes before serving.

You can substitute mascarpone, neufchatel, or goat cheese for the cream cheese if you’d like.

Pair any type of softer cheese with the creamy base, depending on your taste preferences. As long as it’s not a dry, crumbly cheese like parmesan, it will work.

Serve a cheese ball with finger foods for dipping, like crackers, pretzels, or raw veggies.

Warnings.

Borax is poisonous. Get help immediately if you accidentally ingest it or get it in your eyes.

Never let young children handle Borax without close supervision.

Januari 20, 2020

how to make a balloon pet

How to Make a Balloon Pet.

A balloon pet can be made in various ways, each making use of the balloon shape and then being decorated as you please. In each case, these little "companions" aren't meant to last long; they're just a fun toy or decoration for a short time.

Method 1 Blown up balloon pets.

1. Make a balloon pet using a blown-up balloon. There are lots of possibilities here, so this section will provide a few suggestions and you can experiment with your own as well.

2. Make a balloon dog. Choose a balloon in the color you'd like the dog to be, such as brown, white, black, grey or any other color.

Blow up the balloon with helium gas. Tie it into a knot, to keep the gas in place.

Draw floppy ear shapes onto two pieces of card. Color in (if needed), then cut these out. Attach using glue to each side of the balloon, at the non-knotted end.

Draw the face directly onto the balloon. Draw a kidney shape facing downward for the snout and draw a circle in the middle for the dog's nose. Draw large eyes above the snout and blacken them in.

Tie a string on the base. The dog balloon can now be played with or used as a party decoration.

3. Make a balloon fish. Choose an orange or yellow balloon for making the fish.

Blow up the balloon. You can use air or helium gas, whichever is easiest. Tie a knot in it, to keep the air in place.

Draw two fin shapes on orange or yellow card. Cut these out. Attach them with glue to the sides of the balloon, with the back of the fins facing toward the knotted end of the balloon.

Cut out a tail fin from the orange or yellow card. Glue over the knotted area of the balloon.

Stick on two large eyes made from card. Or, simply draw these on with markers.

The fish balloon is now ready for play or to be placed out as a decoration for a party.

4. Make a balloon puppy. This is a fun one for the kids to drag around with them, and is easier if you only have air rather than helium for filling the balloons.

Blow up the balloon. Tie a knot in it, to keep the air in place. (Air is best as it allows the balloon puppy to hover around the kid's feet as it is being walked.)

At the knot end of the balloon, create the dog's face. Draw a round nose just above the knot and blacken it in. Draw a smiling mouth (two semi circle arcs either side of the knot). Draw whisker dots above each smile arc (about four is sufficient).

Either attach floppy ears made from card, or draw them on the dog. They look more effective if made from card though.

Cut out a length of string or cord. Tie onto the balloon knot. This becomes the puppy's leash.

Allow the kids to take the balloon puppy for a walk.

Method 2 Water balloon pet.

1. Fill a water balloon with water.

2. Tie off the balloon to keep the water intact.

3. Decorate the balloon.

Draw a face on it. Use markers. If you want to stick on googly eyes, do so.

Stick on hair if wished. You can use strands of yarn stuck on with craft glue. If you would like a bow in the hair, cut one from paper and glue on.

Draw on any clothing or accessory features, if relevant. For example, a tie, or necklace.

4. Finished. The water balloon pet can be played with for a while.

Method 3 Balloon stress relief pet.

1. Make a stress relief pet that will last a little longer than the other projects suggested in this article. This "pet" can be held in the palm of the hands and squeezed to reduce tension and exercise the hand muscles.

2. Choose a balloon color. Any color is fine, these "pets" can be all colors of the rainbow.

3. Stretch the open end of the balloon a bit. Stretch it back and forth to make the opening a little looser. This will help placing the filling inside.

4. Funnel in the filling for the balloon. This can be either sand or play dough, depending on your preference. Kids tend to like the play dough because it can be shaped into all sorts of funny configurations that keep their shape after molding.

5. Knot the balloon. Ensure that the sand or play dough do not come into the neck area of the balloon; if you have overfilled it, remove some of the filling, to allow you to tie a knot in the balloon.

6. Decorate the balloon pet. Draw eyes, a smile, a nose, freckles, etc. It's fun to let the kids do this for themselves, as they can style the face in their own way.

7. Add hair. This step is optional but can make the pet look funnier. Add small spikes of yarn to the knot end of the balloon; glue to attach. Keep these pieces short, so that they stand up.

8. Done. The balloon pet is now ready for play or stress relief.

Method 4 Balloon animal from balloon art.

1. Make a balloon pet using balloon art twisting techniques. There are many different animal shapes that you can make using this technique, allowing you to have a whole menagerie of balloon pets if wished.

Question : Mine is ugly. How do I make it pretty?
Answer : Experimenting with different faces and designs can help you to make this craft your own. If you're not happy with how it looks the first time, try making it again in a different color or with a different face. Remember, practice makes perfect!

Tips.

Dispose of used balloons thoughtfully. They should be encased inside your normal trash, so that animals cannot find the balloon remains and eat them. Balloons inside animals can kill if they get wrapped around internal organs or cause blockages.

Things You'll Need : Balloons, Markers, Decorative elements, Scissors and glue, Card, String or cord, Sand or play dough as filling.

Januari 15, 2020

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make a paper dog

How to Make a Paper Dog.

There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!

Method 1 Folding an Origami Dog.

1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.

If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.

2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.

Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.

3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.

It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.

4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.

There should be an “X” formed by the creases on the unfolded piece of paper.

5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.

Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.

6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.

Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.

You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.

7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.

There should be an open triangle when you look down at your square.

8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.

Leave the top and bottom flaps in place and don’t do anything to them at this point.

This fold will eventually become the dog’s tail.

9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.

Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.

10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.

At this point in the folding process, you’re making the dog’s head and legs.

11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”

The bottom edge should be in line with the ground if you were to pretend to stand it up.

12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.

Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.

13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.

The crease line creates a jawline for the dog.

14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.

Once you get the hang of the pattern, you can make an origami dog in just a few minutes.

Method 2 Creating a Dog Head.

1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.

If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.

2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.

To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.

3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.

Take your time when making your folds and line up the edges neatly.

4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.

You’ll use the center crease as a guide for your future folds.

5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.

Keep the fold lined up with the center crease to create a proportional face.

6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.

When you look down at your paper, you should see a very angular-looking dog head.

7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.

If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.

8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.

You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.

Method 3 Making a Hand Puppet.

1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.

Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.

2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.

Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.

3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.

If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.

4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”

The top and bottom sections are where you’ll place your fingers to make the puppet talk.

5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.

For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.

6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!

To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.

Tips

Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.

If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.

Things You’ll Need.

Origami paper, Marker, Origami paper, Marker, Construction paper, marker, Scissors, Glue stick.

Desember 19, 2019

How to Make a Paper Butterfly

How to Make a Paper Butterfly.

Paper butterflies are not only dainty and chic, they're also fun to make. Try your hand at origami to create one or, if you're more of a crafting beginner, fold a simpler version with pretty pleats. When you're finished, use your butterflies as decor or give them to friends and family as gifts.

Method 1 Folding an Origami Butterfly.

1. Fold the paper in half, then open it and fold it in half the other way. Make sure to crease both of the folds. Line up the edges when you’re folding to ensure the crease is directly in the center.

If your paper is the same color or pattern on both sides, it doesn’t matter which side you start on. However, if one side is white, or the “backside,” begin with that side facing up.

Choosing the Perfect Paper for Your Butterfly

If you're a beginner, choose oversized origami paper. Bigger sheets are easier to work with.

For easy folding, use origami paper, because it is thinner than regular paper.

If you want to add visual interest, opt for textured paper like linen or felt cardstock.

For a dramatic accent, pick foil paper in a shimmery metallic.

2. Fold the paper in half diagonally, open it, and fold on the other diagonal. Bring 2 opposite corners together to create the folds. Press down firmly to create defined creases. Repeat on both diagonals. Open the paper to lie flat after you fold it.

Your 4 folds should intersect in the exact center of the paper.

3. Bring the right and left creases together, creating a triangle. With the paper laying flat in front of you, press the right horizontal crease to the left one. As you do this, the paper should collapse onto itself in a triangle shape along the diagonal creases you made.

Press down on the triangle to crease the paper once it’s collapsed.

If the paper isn’t folding properly, go back over your original creases again. If they aren’t defined enough, the paper will have trouble falling into the shape.

4. Fold the 2 top corners into the center. When you created the triangle shape, it made 2 layers. Grab the corners on the top layer and line up their edges with the crease in the middle of the triangle.

Try to align the corners with the crease perfectly so they aren’t overlapping or so there isn’t a large gap between the edges in the center.

5. Flip the triangle over and fold the bottom up, leaving a small tip showing. You aren’t folding it completely half. Instead you’re folding it about 1/3 up from the base of the triangle. Hold the fold in place gently with your hand.

Don’t crease the fold.

6. Bend the top layer of the tip over the base. There are 2 layers at the tip of the triangle. Peel the top 1 forward, folding it over the wide triangle bottom you’re currently holding in place. The tip will be the head of the butterfly.

Crease the fold that you make with the tip. This will help secure the body of the butterfly in place and prevent it from unraveling.

7. Pull down the pieces from the bottom layer to create the lower wings. With the top layer folded over, bring the bottom layer of the tip in the opposite direction. The points of the 2 triangular pieces should be facing down, away from the folded head.

It may help to hold the folded tip with your thumb while you pull the other pieces down so that the butterfly doesn’t come apart.

Re-crease the folded tip after you arrange the bottom pieces if necessary.

Trim the edges of the wings if you want a smaller butterfly.

Method 2 Making a Pleated Paper Butterfly.

1. Fold the square piece of paper in half, creasing it. Line up the edges of the paper when you fold it to make sure you’re creating a line directly down the middle. Press firmly with your fingernail to form the crease.

Use any type of paper you’d like, whether it’s origami paper, colorful cardstock, or even pretty gift wrap.

The size of your paper doesn’t matter, as long as it’s square. If you have a rectangular piece, simply trim it down so all of the edges are the same length.

2. Unfold the paper and cut along the crease line. Use your scissors to cut the piece of paper in half. The groove of the crease should help guide your scissors in a straight line through the paper.

Make sure your scissors are sharp so they don’t tear or crinkle the paper.

If you have trouble cutting in a line, hold your scissors against a straight edge, like a ruler, while you cut.

3. Make accordion folds with one of the pieces of the paper. Fold a small piece lengthwise, then flip the paper over to fold it back onto itself. Continue flipping the paper from side to side as you fold along the entire length of the paper. Think of this motion as similar to making a pleat or a fan.

You can make the folds as thick or as thin as you'd like.

Keep the folds all the same thickness, no matter what size you choose.

4. Take the other piece of paper you cut and fold it in half lengthwise. Place the 2 longer edges on top of each other. Then create a crease by pressing down along the fold.

Try to make the crease as straight and even as possible so it splits the paper directly in half.

5. Open it up and fold the 4 corners in toward the center crease line. Line up the edges straight along the crease. Your paper will now be in the shape of a hexagon, with 2 pointed ends formed by the folded corners.

Leave the corners folded. If they won’t stay in place, use a piece of double-sided tape or a little bit of glue under the flap.

6. Flip the paper over and make accordion folds on each side of the crease. Fold one half the paper in towards the center. Then repeat on the other side. This will be the top half of the butterfly’s wings.

Make the folds as large or as small as you’d like, depending on the size of your paper.

7. Bend both pieces of pleated paper in half. Press the pleats together and hold the paper between your thumb and forefinger. Carefully fold one end onto the other, creasing it firmly.[14]

The paper won’t stay folded, but that’s okay. You just want to make a crease, so the paper is in a V-shape.

8. Place 1 piece above the other and tie them together at the center. Arrange the 2 pieces so that they form a butterfly shape. Pinch them together while you tie string or cord around both pieces.[15]

To secure the 2 pieces together better, you can add a dab of craft glue or hot glue in the middle.

Having a friend hold the pieces together while you tie the string makes it easier to get a tight knot.

You can also use ribbon or a pipe cleaner instead of string.

9. Pull out the pleats to open up the wings. Scrunched-up folds don’t exactly resemble a beautiful butterfly. Gently pull the pleats apart so that the 2 pieces of paper look like 1 large wing on each side instead of 2 disjointed ones.[16]

Be careful not to rip the paper when you’re arranging the pleats.

Fun Ways to Use Your Butterflies

Hang them on a string or ribbon to drape as a whimsical garland in your room.

Glue the butterflies to a piece of paper or a canvas as 3D art.

Give them as gifts around the holidays.

Place them on a bookshelf or coffee table as decor.

Turn a butterfly into a Christmas tree ornament.

Things You’ll Need

Origami Butterfly

1 square piece of paper

Pleated Paper Butterfly

1 square piece of paper

1 piece of string, cord, or ribbon

Scissors

Double-sided tape (optional)

Glue (optional)

Desember 16, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make minnie mouse ears

How to Make Minnie Mouse Ears.

Mickey's sweetheart has the fashion sense to wear a bow in her ears, but Minnie mouse has very similar ears to those of her beau. In some special costumes, Minnie has also been known to wear a crown, a Santa hat, and other seasonal accents between her ears. The ears are always black, of course, and the bow usually red with white polka-dots, but you can choose your favorite patterns and colors to make the bow you place between your Minnie Mouse ears.

Part 1 Making the Ears.

1. Gather the material for making your mouse ears. You will need black felt to give your mouse ears color and texture. A cardboard core will give your fabric rigidity and form. If you don't have any cardboard, you might be able to layer several pieces of rigid construction paper together with glue as a substitute. The material you use for the ears should be stiff enough to keep it from flopping around loosely once attached to the headband and if you don’t have felt, you can paint or color the cardboard black.

Black felt, Cardboard, Rigid construction paper (optional), Household glue, Plain paper, Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long).

You should be able to purchase everything you need for this project at your local fabric or craft store.

2. Purchase a headband and tools, if necessary. The headband can be any color, but it should be at least ½" (1.27 cm) thick. You will eventually attach your mouse ears to the headband, so thicker headbands might give your mouse ears greater stability. Including a head band, you should also purchase the following tools.

Headband, Hot glue gun (and glue), Household glue, Pencil, Pipe cleaner. Scissors.

3. Make two identical paper circle templates. You should trace two circles on your paper with a pencil or your chalk. Each circle should be between 3” and 5” (7.6 and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of the circle. These templates will be used to assist you in outlining the dimensions of your mouse ears on both fabric and cardboard.

The tabs will on the bottom of your circles will be used to secure the ears and the headband together.

You might be able to use the base of a bowl to help you in drawing identical circles for both of your templates.

4. Outline your felt circles onto your felt. Place your paper template on top of the felt and trace the circle with chalk onto it. You could use a piece of tailor’s chalk, or even regular chalk in a pinch. This way, you can wipe any leftover chalk away with a damp cloth.

Make four felt circles for every pair of ears you make. You will need to glue felt to the front and back of your cardboard core to make your mouse ears uniformly black.

5. Cut your felt circles. Take your scissors and follow the chalk outlines you've drawn to cut free your felt circles free from the fabric.You can add some jazzy flair to your mouse ears by using zig-zaggy pinking shears.

Pinking shears will add a cute border to your fabric and prevent your fabric from becoming frayed.

6. Trace cardboard circles for your mouse ears. These cardboard circles will form the core of your mouse ears, making it possible for them stand up straight, just like Minnie's! Use your pencil or a piece of chalk to trace the circle template onto the cardboard.

You will need two cardboard circles for every pair of ears you make.

7. Cut out your cardboard circles. Using your scissors, follow the chalk or pencil outline you drew with your templates onto the cardboard. Be sure you don't cut off your tabs! These will be necessary to connect your mouse ears to the headband.

You may need to touch up your cardboard and felt circles/tabs to make them as close to identical as possible.

Compare and trim your felt and cardboard circles by holding the cardboard and felt pieces together in a stack. Then you can trim down any irregularities.

8. Glue the felt to the cardboard. Household glue should be sufficient to attach a piece of felt to the front and back of each cardboard circle/ear. Drizzle glue back and forth along the cardboard and press your felt into place. Press the felt to the glue firmly for five to ten minutes help it set.

To create the best bond between your glue and the felt, you may want to allow your glue to rest for 30 minutes to an hour.

Part 2 Attaching the Ears to the Headband.

1. Spread hot glue along the tabs of the ears. Regular household glue won’t hold up to wear and tear as well as hot glue. The special glue used in hot glue guns, however, is much more durable. It will create a firm bond between ear and headband.

You'll have to move quick after you apply your hot glue. The glue will dry quickly soon after application.

Hot glue fresh from the gun will be very hot. Be careful not to burn yourself.

2. Hot glue the tabs of your circles to the underside of the headband. Your circles should be at least 4” (10 cm) apart so that you have room for the bow that will go between the ears. You may want to mark your headband with your chalk where you'll be attaching the ears to prevent yourself from gluing them into the wrong place.

If your headband is flexible or will permit the use of staples, you could also use a hardy stapler to connect the tabs of your mouse ears to your headband.

3. Allow the glue to dry thoroughly. Playing with your mouse ears before the glue has completely dried could cause your mouse ears to come free of the headband. To ensure you don't have to re-glue any of your pieces together, you should allow your glue to firm for 30 minutes to an hour.

4. Style the ears into position. Your mouse ears might not stand straight up like Minnie Mouse's at first. To encourage your mouse ears to hold this position, fold both up and forward. The glued tabs will keep the ears in place.

Part 3 Creating the Bow.

1. Measure and cut a 10” (25 cm) length of ribbon or fabric. You can use either ribbon or fabric for your bow, although ribbon will likely be a little shinier and look more like the bow Minnie wears. In either case, it should be 5” to 8” (12.7 to 20.3 cm) wide. You will eventually gather this fabric around its middle, which will cause the sides to fan out. This will give your bow its shape.

Thicker cuts of fabric will create more bunching when you gather this piece around its middle, which will give your bow a fuller appearance.

2. Measure and cut a 3” (7.6 cm) gathering string. This is the piece you will use to gather the fabric around the middle of your 10" (25 cm) length of ribbon. You should use a similar kind of fabric to your 10" (25 cm) ribbon, but you could also add some pop to your design by using a contrasting color fabric.

For example, if you are using Minnie's traditional bow color, red with white polka-dots, you might choose a bold blue for your gathering string.

3. Lay the 10" (25 cm) piece of ribbon on a flat surface. Put the print side face down. You're going to want to glue your gathering string along the back of your bow, which will be the same as the opposite side of the pattern.

4. Fold the long ends your 10" (25 cm) ribbon toward its center. You'll want each side to overlap slightly at the center of your 10" (25 cm) length of ribbon. Fold one end at a time so that there is enough overlap to glue these side where the meet at the center of the ribbon.

5. Glue the folded inward ends at the overlap. It should only take a dab or two of hot glue or fabric glue to join the ends together firmly. Press the fabric firmly to create a stronger bond between the fabric and glue.

You should follow the directions on your glue to achieve the best bond. Some glues will set and cure faster than others. Generally, you should hold the glue firmly for one to five minutes for best results.

6. Arrange your ribbon into a bow shape. Use one hand to pinch your ribbon together toward its centermost point from the top and bottom edges. This will be easiest to do if you are working with a ribbon that is at least 5” (12.7 cm) wide.

Pinching your ribbon together tightly will cause the outside edges to flare out more dramatically.

7. Loosely wrap your gathering string around your bunched ribbon. The 3” (7.6 cm) piece of ribbon will hold the fabric of your bow in its flared position. Wind it around several times and then remove your fingers where you were pinching the bow in the middle.

Hold the ribbon with your free hand to make sure it doesn't come unwound or loose.

Wind the remaining length of your ribbon around the center tightly.

8. Glue the gathering string in place. Lift one end of the small piece of ribbon and apply a dab of hot glue or fabric glue. If using hot glue, you should be careful not to burn yourself by pressing on the fabric immediately after glue application.

To apply pressure to make the best seal between your hot glue and fabric, you might use a tool to prevent getting burned, like a paperweight, gloved hand, or tweezers.

Fabric glue and other cold glues should be held together firmly to encourage a strong bond. Press the glued piece of ribbon together. Hold this position for about 30 seconds to a minute.

Part 4 Attaching the Bow to the Headband.

1. Slip a pipe cleaner through a fold in your bow. The bunchings of your bow fabric should have created folds through which you can thread your pipe cleaner so that it passes under your glued gathering string.

If you find it difficult to feed your pipe cleaner through a fold and under your gathering string, you can always use glue to attach the pipe cleaner along the back of your bow.

A dab of hot glue onto the back of your gathering string should be enough to hold your pipe cleaner in place.

2. Cross one end of the piper cleaner over the other. Orient your pipe cleaner so it is equal length on both sides of your gathering string. Now cross the sides of your pipe cleaner at the midpoint over the front of your gathering string and add a twist.

This will prevent the pipe cleaner from slipping out of the bow while adding stability to the bow in general.

Experiment with different colored pipe cleaners to personalize your Minnie Mouse ears!

3. Secure your bow with the loose ends of the pipe cleaner. Center the bow between the ears. Then you're going to wrap each end of the pipe cleaner around opposite ends of your headband. Twine each side of the pipe cleaner down opposite ends of the headband until you go no further.

The ends of pipe cleaner can be pointy. To prevent the wearer from getting poked, you may want to turn these inward on your headband. The ends can also be taped to the headband as an extra precaution.

By attaching your bow to your mouse ears with a pipe cleaner, you'll be able to swap out different bows without having to make a new pair of mouse ears.

Twist ties can be used to reinforce your pipe cleaners if you find the pipe cleaner windings are not holding the bow in place well enough.

4. Add finishing touches and show off your mouse ears. Minnie, being a stylish mouse, would probably go ga-ga over some rhinestones, glitter, feathers, or other accents you might add to your mouse ears. Most of these can be attached with a small dab of hot glue. Once you've finished adding your finishing touches, you should show off your mouse ears to all your friends.

Tips.

Use a black felt tip marker to color white pipe cleaners if you don't want the white to show too much.

Warnings.

Hot glue emerges from the gun applicator at a very high temperature. Whenever using hot glue, you should follow the instructions that came with your glue gun and take care.

Things You’ll Need.

Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long), Black felt, Black felt tip marker, black crayon or paint (optional), Cardboard.

Chalk, Foam (optional), Headband, Hot glue gun, Household glue, Pipe cleaner, Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019

how to make mickey mouse ears

How to Make Mickey Mouse Ears.

Mickey Mouse is the worldwide symbol of the Disney empire. He is beloved by children all over the world, so it’s no surprise kids want to wear Mickey Mouse ears while playing or out trick-or-treating on Halloween. You don't have to pay outrageous prices for mouse ears of your own. All you need are a few household supplies and soon you'll have a pair all to yourself.

Part 1 Making the Ears.

1. Gather the material for the ears. You will need black felt and cardboard to fashion your ears. However, if you don't have cardboard, you might be able to use construction paper that is both thick and stiff.

All materials needed for making Mickey Mouse ears can be purchased at a craft or fabric store.

If you don’t have any felt, you can paint or color the cardboard circles black or you can even paste some normal black craftsheet on the cardboard.

You could glue together several pieces of sturdy construction paper if you don’t have cardboard for the ears.

The material you use for the ears should be stiff enough so that the ears don’t flop over after affixed to the headband.

2. Purchase a suitable headband. The headband should be black and at least ½" (1.27 cm) thick. This will form the base for your mouse ears and attach them to your head. A thicker band might give greater stability to your mouse ears.

3. Create two identical circle templates out of paper. You will need to trace two circles, one for each ear. Each circle should be between 3” and 5” (7.6 cm and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of each circle. The circle template will look somewhat like a globe lamp. The bottom tab on the circle will serve to anchor the ears to your headband.

4. Trace your circle templates onto the felt. Hold the paper template with one hand while you trace four circles onto your black felt. You can trace your circles with a piece of chalk. Later, you can wipe the chalk off with a wet cloth.

5. Trace the circle template onto the cardboard. This cardboard is what will support the fabric of your mouse ears, keeping them looking perky. You will need two cardboard circles, one for the left ear and the other for the right.

You can also use the bottom of a bowl to create the circles you need for the ears.

6. Cut the felt circles. You'll want to use very sharp scissors or fabric scissors, otherwise you might not be able to cut smooth circles in your fabric. Follow your outlines with your scissors and a steady hand. You may need to clean up the edges once you have cut the circles free.

7. Cut the cardboard circles. In the same fashion as the felt circles, but still identical in shape to those circles, you'll need to cut out your cardboard circles. These will be used to reinforce the fabric and make it sturdy.

8. Glue the felt evenly to the cardboard. In most cases, household glue will be good enough to attach the felt to the front and back of each cardboard ear. This will give the ears the internal stability of cardboard, but the color and appearance of mouse ears.

Part 2 Attaching the Mouse Ears to the Headband.

1. Use a hot glue gun if you attach the mouse ears to a plastic headband. The higher quality glue used in a hot glue gun will create a better bond between the flap of the ear and the base of the band. Or, if the headband is made out of more flexible material, you can simply staple the mouse ears to the headband.

2. Fold and glue the tabs to tuck underneath the headband. The circles of your ears should be about 3” (7.62 cm) apart. Use your hot glue gun attach your tabs firmly to your headband. You can achieve the best placement for your ears by marking the position of each ear where you plan on attaching it to the headband.

You may need to fold the ears up and forward to encourage an upright position.

3. Allow sufficient time for glue to dry, if applicable. Staples won't require time to firm up, but if you've glued your mouse ears together, you should allow 30 minutes to an hour for the glue to set. You can improve the bond between your mouse ears and headband by holding the glued parts together while the glue sets for 5 to 10 minutes.

4. Dress up in a Mickey outfit and show off your ears. You might be able to get away with a costume comprised of Mickey's classic yellow shoes and red shorts. Or maybe you'll want to imitate one of Mickey's character roles, such as the robed assistant wizard in Disney's Fantasia.

Tips.

Consider substituting pieces of stiff foam for the cardboard. Glue two pieces of foam back to back and create a tab so you can attach the foam circles to the headband.

The Mickey Mouse ears sold at Disney theme parks are actually ears attached to a black beanie. You can make your ears with a beanie instead of a headband to make yours look more authentic.

A sturdy stapler can work in place of a glue gun, if you have no glue gun available.

Warnings.

Avoid using regular glue for joining headband and ears together. It will not likely be strong enough to hold the ears in place for a long duration or throughout heavy play.



Things You’ll Need.

Black felt, Black felt tip marker, black crayon, or paint (optional).

Cardboard, Chalk, Foam (optional), Hot glue gun (and glue), Headband.

Heavy duty stapler (optional), Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019