how to create clay animals

How to Create Clay Animals.

Making clay animals is a great way to turn a dull afternoon into an exciting craft day. With a little effort and a lot of imagination, you can turn your clay dough into a jungle. Once you've mastered animal how-tos, you can create creatures of all colors, shapes, and sizes. All you need is some clay, some around-the-house tools, and a love of animals to create your own mini zoo.



Method 1 Rolling Clay Snakes.

1. Roll a piece of clay between your fingers. Choose your favorite color or just a color you think would make a good snake. Put a piece of clay between your hands and roll it back and forth until you make a long, log shape. You can continue rolling until the snake is as thin or thick as you'd like.

Go as quickly or slowly as you like, depending on how closely you want to monitor your clay log's length.

Be careful not to make your clay log too thin, as it will progressively get more delicate the thinner it gets.

2. Flatten one end of the snake for a head. Poke two holes into the head with a toothpick for eyes, or add a pair of small googly eyes. You can also roll two tiny clay balls between your finger and your thumb and attach them for eyes, if you have neither a toothpick nor googly eyes available.

3. Make a tiny clay tongue. For a tongue, grab a piece of red or pink clay and place it between your finger and thumb. Roll it into a log shape, much like how you rolled your snake but on a smaller scale. Split your log in two at one end to create a forked tongue, and attach it to the end of your snake's mouth.

4. Add patterns to its skin, like polka dots or stripes. For polka dots, flatten tiny clay balls with your finger and thumb and attach them to your snakes body. You can make stripes by rolling tiny clay logs and spacing them across the length of your snake.



Method 2 Making Clay Snails.

1. Choose two different colors of clay. Choose colors that stand out next to each other and do not clash. Red and pink, for example, might not be a great idea. Red and orange, though, can make a pleasant sunset-like effect.

Complementary colors, or colors opposite from each other on the color wheel, look especially bright when next to each other.

2. Roll one color into a log. This will be your snail's shell. Continue rolling the clay until it is long and thin. Make the log as long as possible to make a shell with a detailed spiral. Stop rolling when the log is thin enough to fold in on itself but thick enough that it won't break apart.

You might have to try a few times before you find the right thickness for your shell.

3. Fold the log in on itself. Once you've achieved a good length for your shell, fold the log into a spiral. Start at one end of the clay, which will become the middle of your spiral, and keep folding until your clay shape resembles a cinnamon roll. Set the spiral aside after you finish so you can attach it to the body later.

4. Roll a small log to be the snail’s body. This will be your snail's body, so make it thicker and shorter than your snail shell. After you're done rolling, attach the snail's shell into the back of its body. All you have left to add now are facial details.

5. Add antennae and a face. Roll two small logs for the antennae and attach them to the top of your snail's body. Then, poke two holes with your toothpick for the eyes (or add two small googly eyes).

For a mouth, roll another small log and curve it into a smile. Attach it below the snail's eyes.



Method 3 Sculpting Clay Dogs.

1. Start with a thick oval-shaped ball. This will be your dog's body. You can make it out of a normal color for a dog (like brown, black, or white) or you can use vibrant colors like violet, aquamarine, or pink. Lay the oval down horizontally, and prepare to add the dog's head and four legs.

You can make the body a little longer to make a dachshund-type dog (also known as a wiener dog).

If you'd like to make a dalmatian, use white for your dog's body and add flattened ovals for spots.

2. Make a round ball for the head. Attach it to the top of your dog's body. Press it in until the head sticks. Form two triangles or long ovals from the clay, and attach it to the top of your dog's head for ears. Add eyes and a smile, and top off your dog's face with a round oval for a nose.

Place a flattened red or pink half-circle on your dog's mouth for a floppy tongue.

3. Add four rectangles for the legs. For legs, shape four rectangles out of the clay. Place the legs onto the dog in pairs. Two go in the front of the body and two in the back. Scratch in two or three lines at the bottom of the legs for paws.

4. Attach a tail to your dog's body. Roll a small piece of clay back and forth between your hands, much like how you made the snake. Continue rolling until the tail gets to the desired length. Attach the tail to the back end of your dog's body.



Method 4 Creating Clay Birds.

1. Roll an oval for the body. For a bird body, the oval should be long and oblong. Make the bottom end of the oval larger than the top end. Place the oval upright and prepare to add the bird's head.

2. Make a sphere for the bird's head. Attach the head to the top of the oval and press down until it sticks. Stick on (or poke in) two eyes for your bird. For a beak, roll an orange or yellow ball between your finger and thumb. Use the toothpick to draw a slit lengthwise on the ball. Press the back end of the ball onto your bird's head.

Stretch the top and bottom ends of the beak into points for a less cartoonish beak.

3. Add wings to your bird. Form two ovals out of your clay and flatten them until they are two-dimensional. Place one wing on either side of your bird's body. If desired, you can use the toothpick to draw designs (like feather prints) on your wings.

For a two-colored wing, form two teardrop shapes out of clay and flatten it until it is also two-dimensional. Place one on each of your bird wings.

4. Sculpt two bird feet. Feet on clay birds are optional but can add a nice touch to your bird. Form six small cylindrical tubes. Place the tubes in threes on the bottom of your bird's feet. These will form claws poking out of your bird's body.

Your bird's feet will not be strong enough to support it and may get flattened if placed on a flat surface.



Question : How do I make a butterfly?

Answer : It's really easy. You just make a worm for the body, and make the wings like you make it into a circle, and you kinda make a curve in the middle. Then you can decorate it.

Question : How do I make a fish?

Answer : Take a ball of clay, roll it into a ball, and flatten it. Then, mold it into the desired shape, depending on the type of fish you are making. Make the eyes with black clay and add the details, such as fins. Scales can be made using a toothpick.

Question : How do I create a clay dolphin?

Answer : Curve your log of clay slightly. Pinch one of the ends in the middle so the clay splits off into two parts at the end, and smooth out the two parts of the tail. At the other end, squeeze a tiny bit of the end to create the beak. Poke holes for eyes, and, using a butter knife or your fingernail, press lightly all around the beak to form the mouth. Then, with a toothpick, poke a blowhole on the top of the head. Behind the head, squeeze clay on the back up to make the dorsal fin, and smooth and curve towards the tail. Finally, make the flippers by squeezing clay on the sides directly under the dorsal fin, and smooth out the flippers.

Question : How do I make an authentic clay wolf?

Answer : Make it like a dog, because the two are similar, but if you want to make a howling one, shut the eyes, open the mouth, and tilt it upwards, chin facing down.

Question : How do I make a clay jaguar?

Answer : You mold it the same as you would with a cat, but when it dries, paint spots.

Question : How do I make a whale out of clay?

Answer : Make a fish shape with blue clay, but make the tail end face upward and downward. Make a hole on the top (don't make gills or scales) for the blowhole.

Question : Can the spots be made of clay that isn't cured?

Answer : Yes, if you don't have time to let it cure or paint. It's okay with play dough or people in a hurry.

Question : How do I make a snake?

Answer : Making a snake is very easy. Just roll out a log of clay. Make one end pointy and the other end flat. Add two black eyes with clay, beads, or poke the head (the flat end) with a toothpick to make eyes. Add a forked tongue if desired. Add dots, swirls, patterns, lines, and twirls if desired.

Question : Can I create clay animals out of Play-Doh?

Answer : Yes, if it is just temporary. But if you are looking to make it permanent, then no.

Question : How do I make a clay cat?

Answer : You'll need seven pieces of clay: four feet, one long one for the body, a ball for the head and a long skinny piece for the tail. Pinch up two ears on top the head and draw in the face and whiskers. You can also make whiskers by rolling very thin bits of clay.



Tips.

Sculpt your animals out of salt-based clay so can bake them in the oven and keep them once they harden.

Thin parts of the animals, like ears and tails, are fragile. Handle these areas gently as you create your animals.

Once you've mastered these animals, get creative and make your own clay animal designs. You can make any clay animal that you set your mind to!

If your animal doesn't turn out the way you'd like, don't feel bad. The best part about clay is that you can always start over.

You can buy inexpensive jewelry findings from craft stores. Try using these to make your animals into unique, handmade jewelry.

Things You'll Need : Clay, Toothpicks, Googly eyes.

Februari 24, 2020

how to crochet a kitty eyeball toy

How to Crochet a Kitty Eyeball Toy.

A toy that says "eye love my cat". This eyeball toy is easy to crochet and will prove very entertaining for your cat.



Skill level: Intermediate



Steps.

1. Note that the pattern is worked continuously without joining or turning between rounds. To help keep track of your stitches, it may be helpful to place a stitch marker at the beginning of each round.

2. Commence crocheting. With black, ch 2.

Rnd 1. 6 sc in second ch from hook. 6 sc.

Rnd 2. 2 sc in ea sc around. 12 sc.

3. Change to Iris Color.

Rnd 3. Sc in blo of first sc, 2 sc in blo of next sc, *sc in blo of next sc, 2 sc in blo of next sc; rep from * around. 18 sc.

Rnd 4. Sc in first 2 sc, 2 sc in next sc, *sc in next 2 sc, 2 sc in next sc; rep from * around. 24 sc.

Rnd 5. Sc in first 3 sc, 2 sc in next sc, *sc in next 3 sc, 2 sc in next sc; rep from * around. 30 sc.

Rnd 6. Sc in first 4 sc, 2 sc in next sc, *sc in next 4 sc, 2 sc in next sc; rep from * around. 36 sc.

4. Change to white.

Rnd 7. Sc in blo of first 5 sc, 2 sc in blo of next sc, *sc in blo of next 5 sc, 2 sc in blo of next sc; rep from * around. 42 sc.

Rnds 8 - 14. Sc in ea sc around.

Rnd 15. Dec 1 in first 2 sc, sc in next 5 sc, *dec 1 in next 2 sc, sc in next 5 sc, rep from * around. 36 sc.

Rnd 16. Dec 1 sc in first 2 sc, sc in next 4 sc, *dec 1 sc in next 2 sc, sc in next 4 sc, rep from * around. 30 sc.

Rnd 17. Dec 1 sc in first 2 sc, sc in next 3 sc, *dec 1 sc in next 2 sc, sc in next 3 sc, rep from * around. 24 sc.

Rnd 18. Dec 1 sc in first 2 sc, sc in next 2 sc, *dec 1 sc in next 2 sc, sc in next 2 sc, rep from * around. 18 sc.

Rnd 19.' Dec 1 sc in first 2 sc, sc in next sc, *dec 1 sc in next 2 sc, sc in next sc, rep from * around. 12 sc.

5. Stuff the toy.

6. Complete Rnd 20. Dec 1 sc in first 2 sc, *dec 1 sc in next 2 sc; rep from * around. Join with sl st to first sc in rnd. Do not finish off; 6 sc.

7. Finish. Ch 3. Keep the loop of yarn on the crochet hook and pull it taut. Do not remove the hook! Hold the three feathers flat against the ch-3 chain, with the tips of the feathers pointing toward the eyeball.

8. Tape the feathers around the ch-3 chain to keep them in place, leaving 1 inch (2.5 cm) of the stems of the feathers extending above the tape. Then, still keeping the loop of yarn on the crochet hook, take the free end of the yarn and wrap it tightly around the stem of the feathers, covering the tape and working from top to bottom.

9. Fold the stems of the feathers down over the section that was just wrapped in yarn and tape in place again. Once again, keeping the loop of yarn on the crochet hook, wrap the free end of yarn tightly around the tape, this time working from bottom to top.

10. When the entire taped section is wrapped in yarn, begin with the loop still left on the crochet hook and work 36 ch as usual. Then remove the crochet hook from the last chain and thread the loop through the holes in the jingle bells (you may need to pull the loop to make it long enough to thread through the bells, but take care not to rip out the entire ch-36 chain).

11. Reinsert the hook into the loop and sl st in the first ch of the ch-36. Finish off. Weave in all ends. If desired, brush a coat of non-toxic white craft glue around the wrapped, taped ends of the feathers to prevent unraveling. Allow to dry completely overnight.

12. Finished.



Tips.

Finished size: About 3 inches (7.6 cm) in diameter.

Abbreviations.



blo = back loops only.

ch = chain.

dec = decrease.

ea = each.

mm = millimeter.

rep = repeat.

rnd = round.

rnds = rounds.

sc = single crochet.

sl st = slip stitch.

yd = yard.

Things You'll Need.

White: 120 yard (109.7 m) 4/worsted weight yarn.

Iris color: Scrap 4/worsted weight yarn.

Black: Scrap 4/worsted weight yarn.

Size F-5 (3.75 mm) crochet hook.

Two 3/4-inch jingle bells.

Three craft feathers.

Stitch markers.

Yarn needle.

Polyester fiberfill or stuffing of choice.

Clear adhesive tape.

Non-toxic white craft glue (optional").

Februari 23, 2020

how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to make ping pong ball chicks

How to Make Ping Pong Ball Chicks.

Ping pong ball chicks are an easy way to make little chickens for craft or decoration. They're a great idea for spring craft projects, for Easter decorations or just because you love chickens. The children will enjoy making these neat little chicks and it's an affordable toy or craft.



Steps.

1. Paint the ping pong balls yellow. Make sure the entire ball is painted yellow. Hang or rest in an egg carton to dry. They must be completely dry before proceeding with the next steps.

2. Make the beaks.

Cut long diamonds from the orange felt. You'll need one orange diamond one per bird.

Fold in half to create a beak. Keep pinched with your fingers.

Glue in place on the fold line/area on the ping pong ball. The triangle edges will stick forward to form the beak shape.

Repeat for each chick you're making.

3. Create eyes. Draw on eyes with the black Sharpie marker.

You can also create eyes with eye stickers, but handmade ones are fast and easy to do, plus you have plenty of creative leeway to make the eye shapes any way you like (try anime style, for example), and with or without eyelashes too.

Repeat for each chick you're making.

4. Make the wings for the chick.

For each bird being made, cut out two wings from the yellow felt. Cut the wings in a rounded way, not spiky or too textured. Keep the chick looking soft and cute!

Glue the wings in place on the sides of the chick.

Repeat for each chick you're making.

5. Shape legs from the wire.

At the end of each leg, shape the three "toes." You'll need to play around with the balance a little, to be sure that the toes enable the chick to stand.

When finished, glue the legs firmly in place. Allow to dry completely.

Paint the legs completely using orange paint.

Repeat for each chick you're making.

6. Display the finished chicks. Place on a tabletop or in a basket. If used as a toy, do not give to children under 3, as the small parts are a safety hazard.



Tips.

Looks at pictures of chicks online for design or coloring ideas.

If you want to make the chick look more realistic, add a yellow pom pom for a head, using the ping pong as the body.

Warnings.

Neither the project nor the end result are suitable for children under three, due to the small parts.

Use orange pipe cleaners (chenille sticks) in place of wire if you're concerned about children being scratched by the wire.

Wire feet may scratch tabletops and other fine surfaces. If this is going to be a problem, glue the chick to a square piece of fine card and place that on the surfaces instead.

Things You'll Need.

Yellow paint.

Orange paint.

Black Sharpie or other permanent marker brand.

Orange felt.

Yellow felt.

Thin craft wire (or use orange pipe cleaners and skip the orange paint).

Scissors.

Glue.

Februari 08, 2020

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020

how to make papier mache eggs

How to Make Papier Mâché Eggs.

Papier-mâché eggs are both easy and fun to make. You can paint them bright colors and use them as Easter decorations, or you can paint them to look like real wild bird eggs and display them in your room. They do take a few days to dry, but they are a great, hands-on activity, which many children love. When you are finished, you can even fill them with candies, and crack them open later!

Method 1 Making Basic Eggs.

1. Blow up a balloon, tie the end into a knot, and set it down in a small cup. The cup will prevent the balloon from rolling away while you work.

2. Mix 2 parts white school glue with one part water in a small bowl. This will be your papier-mâché glue.

3. Tear some paper into small squares or rectangles. Newspaper works best, but you can also use plain newsprint paper from the craft store instead. Don't cut the paper; the ragged edges will help the paper seal together and give you a smoother finish.

Consider using both newspaper and tissue paper. This way, when you do multiple layers, you will be able to see which one you are working on.

Avoid using plain printer paper or construction paper. Both are too thick and too stiff for this project.

4. Dip a paper strip into the glue, and place it onto the balloon. Drag the strip across the edge of the bowl as you pull it out. This will remove any excess glue. Place it down near the top of the balloon. Use your fingers or a paintbrush to smooth the paper down so that it lays flat against the balloon.

5. Continue applying the paper strips until the balloon is completely covered. Overlap the strips slightly as you work from one end of the balloon to the other. Work your way from the top of the balloon all the way down to the tail end. Do not cover the tail, or you won't be able to remove the balloon.

6. Apply a second layer of paper. You don't have to dip these strips of paper into the glue. Simply stick them to the wet paper that's already on the balloon, and use your fingers or a paintbrush to smooth down the edges.

Consider using a tissue paper or plain newsprint for this layer. This way, you will be able to see what's cover and what isn't.

Two layers is ideal for eggs that you want to cut open. If you want a sturdier egg, apply a third layer. You may have to use some extra glue for this one.

7. Hang the balloon up to dry. Use a clothespin to clip the balloon to a hanger or clothesline. Wait for it to dry completely before moving on. It may take up to 2 or 3 days.

8. Pop and remove the balloon. Once the egg is completely dry, gently tug the balloon tail up so that you expose a bit of the balloon. Pierce it with a pin or pair of scissors and wait for the balloon to deflate. Once it is completely deflated, pull it out and discard it.

9. Cover the hole with 2 to 3 layers of paper and glue and wait for it to dry. Use the same technique as you did for the rest of your egg. If you wish to fill your egg, then do so before covering up the hole.

10. Paint the egg a solid color using acrylic or tempra paint and wait for it to dry. To make the paint really stand out, coat the entire egg using white primer and let it dry. Once you have your white base, you can paint your egg any color you want.

11. Add patterns to the eggs, if desired. Once your base color has dried, you can paint designs onto it. You can also draw designs using glitter glue or puffy paints instead.

Great Easter designs include: stripes, dots, and squiggles. Try to use soft, pastel colors.

12. Consider giving the eggs a final coating of gloss. Once all the paint has dried, spray or paint the eggs with a glossy sealer. You can even use a glittery sealer to give it some extra sparkle.This will help make them more durable.

If you'd like, you can cut the egg in half using jagged, zigzag lines so that it resembles a cracked open egg. When you are done, you can fill each half with fake grass, and place a little chick or bunny figure in each.

Things You'll Need : Water balloon, Newspaper, Paintbrush, Water, White school glue, Small cup, Scissors, Clothespin.

Method 2 Making Tissue Paper Eggs

1. Blow up a water balloon, tie the end into a knot, and set it down into a cup. The cup will hold the balloon sturdy while you work.

2. Pour some liquid starch or decoupage glue into a bowl. You can also mix your own glue by using 2 parts white school glue and 1 part water.

3. Cut the white tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the base for your egg. One sheet will be enough to coat three eggs.

4. Cut the colored tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the outside of your egg. You can make it all one color or many different colors. Some crafters have noted that lighter colored tissue paper, such as yellow, shows the layering and overlapping more.

To make polka dot eggs, punch a ¾-inch (1.91 centimeters) circle in the center of your square using a scrapbooking hole punch. Discard the circles, and use the squares so that you get white polkadots on your egg.

5. Start applying the base layer using the white tissue paper. Brush on some of your glue onto the balloon, and press a piece of white tissue paper onto it. Smooth it down with a brush dipped in more glue. Overlap the pieces as you cover the entire egg.

Start applying the tissue paper at the top of the balloon and work your way towards the tail. Don't cover the tail up.

6. Apply the colored layer. If the tissue paper on the balloon is already damp, you do not need to apply more glue. Simply press a piece of colored tissue paper onto it, and smooth it down with a little more glue. Remember to overlap the pieces by a little.

If you are making polka dotted eggs, be careful not to cover up the white polka dots!

7. Hang the balloon up to dry overnight. You can do this by clipping the tail of the balloon to a hanger or to a clothesline. This can take 2 to 3 days.

8. Pop and remove the balloon. Make sure that the balloon is completely dry, then gently tug on the balloon tail until you expose a bit of the balloon. Pierce the balloon with a pin or a pair of scissors. Wait for the balloon to deflate, then pull it out and discard it.

9. Fill the egg with candy, if desired. Small candies, such as chocolate eggs, work great! Be careful not to overfill the egg; it is still very fragile. If you do not wish to fill your egg, you can move onto the next step.

10. Cover the hole with 2 to 3 more layers of colored tissue paper. Use the same technique as you did when first covering the egg. Let the patch covering the hole dry before moving on.

Because these eggs are made from colorful tissue paper, they don't need to be painted. You can still decorate them, however, with glitter glue if you'd like.

11. Give the eggs away as gifts or use them as decorations. To open the eggs, simply tear them apart. They make great gifts for Easter baskets!

Things You'll Need : Water balloon, White tissue paper, Colorful tissue paper, Paintbrush, Liquid laundry starch or decoupage glue, Small cup, Scissors, Clothespin.

Question : Can I fill a paper mache creation with something to make it heavier?
Answer : Sure! Candy works well if you want it to be like a pinata.

Question : Which one is stronger?
Answer : Method 1 will give you a stronger, more durable result, as newspaper is thicker than tissue paper.

Question : Which method is better to create the eggs?
Answer : It depends on what you are looking for. The 1st method is better for making stronger eggs, for example, to put heavier objects in. However, the 2nd method is better if you want to put candy in, as they are much easier to open up, especially for children. If you're thinking of using them for decorations, method 2 would make for prettier, delicate decorations indoors, but method 1 is more advisable for outdoor decorations as the eggs will be more durable against the weather.

Tips.

For a vintage design, use newspaper and don't paint the eggs. Instead, give them a coat of glossy varnish.

You should tear newspaper and newsprint, but you don't have to tear tissue paper.

You can also do this project using regular balloons as well, but it will take more time to dry.

If the egg collapses when you remove the balloon, stick a pen, pencil, or chopstick into it and push the dents out as best you can.

Paint the egg to resemble real bird eggs. Look up pictures of interesting bird eggs online, and try to copy them as best you can. You can create speckles by splattering paint over the egg.

For something quick and easy, decorate your egg with stickers. If this is for Easter, use Easter themed stickers.

If you made your egg using newspaper and wish to paint it, add a layer of blank newsprint or white tissue paper. This way, the letters won't show through.

Decoupage shapes cut out of paper onto your finished egg instead of painting the designs.

Punch out shapes out of tissue paper using scrapbook punches, and press these shapes onto your egg while it is still wet.

Try printed paper that has patterns on it. Origami paper and printed tissue paper is great for this. Avoid using thick or glossy paper, such as gift wrap; it is too thick and stiff for this project.

Warnings.

Do not get impatient when it comes to drying. The papier-mâché must be completely dry before you remove the balloon. If you remove it too soon, the whole egg will collapse!

Januari 21, 2020

how to make a clay bird

How to Make a Clay Bird.

Using clay of your choice, shape a little clay bird with basic features and style. It's a good beginner's clay project, to get you used to shaping a figurine with clay and making basic design indents.

Steps.

1. Start with a clay lump that fits snugly in your hand. Mould it in your hands until you get a ball, then put it on the table. Carefully push down to flatten the bottom, without making holes in the ball with your fingers.

2. Form a ball that is a bit smaller than a ping pong ball. Include a little extra in case (for the neck). Put the head on top of the body at an angle then smooth it in with your fingers and some water. Use the extra to make a neck. To get this part right, it is suggested that you keep a picture of a bird in front of you.

3. Take a small rectangle of clay and put it opposite the head for the tail. Smooth it in, in the same manner as you did with the head.

4. Add some detail. For the beak, just locate the right place and put on a little bit of clay and smooth it in, then use a toothpick to shape the beak. Easy.

5. Take a clay oval and smooth it onto the body. Use a toothpick and your fingers to shape it. Do the same on the other side to make wings.

6. Widen the tail at the end by lightly flattening and pushing into the clay. Make some ruffles by adding and smoothing in some clay strips the length of the tail.

7. Add eyes if you want.

8. Check that there are no cracks, as these weaken it when it's dry. If there are any, smooth them out with water and your fingers.

9. If you want your clay bird to be hollow, make a hole in the flat side that goes to a bit before the edge. Carefully spoon out the clay, being careful at the head. Don't hollow out the tail.

10. Leave to dry. If wished, you can paint the bird or add clear varnish.

Follow the instructions on the clay packaging to determine how best to dry the clay; some clay requires baking, while some clay can air dry.

Question : How do I make a clay unicorn?
 Answer : Use your imagination. Look up pictures of a unicorn. If you know how to make a clay horse, do this and add a horn.

Question : How much is white clay? Where can I buy it?
 Answer : The price of white clay varies depending on where you live and what store you buy it from. You can get it at a craft store or you can order it online.

Question : How do I make a tail?
 Answer : For a bird tail, make a small, thick cone-shaped triangle, and round the tip. For the ruffles, flatten some clay and stick it to the tail. Repeat as necessary.

Tips.

Modeling clay can be found in toy, hobby and department stores. It can also be purchased from online retailers.

Things You'll Need.

Modeling clay (air-dry or bake styles are both fine).

Toothpicks.

Small spoon.

Clay sculpting tool (optional but helpful).

Januari 21, 2020

how to make a bird nest

How to Make a Bird Nest.

A bird's nest makes a wonderful mantelpiece decoration, and can make use of almost anything you find along a nature hike, or in your front yard. Wild birds usually prefer to make their own nests, but you can lure many species to your yard by leaving the right materials outside, or building a nesting box.

Method 1 Building a Decorative Nest.

1. Find long, flexible plant stems. These will form the main shape of the nest, and are much easier to work with than hard, short twigs. You can use straw, long grass, vines, willow fronds, bendy reeds, or seagrass found outdoors or at a garden supply store. Raffia is another good option, obtainable from a craft supply store.

If Mexican feather grass grows in your area, grab a clump of it and pull your hand upward to remove a handful of hairy seeds clinging together. Once you have enough seeds, clump them into a ball and make a nest shape by sticking your thumb into it.

2. Bend the stems into a loop. Grab a thick handful of the stems, and bend them into a U shape, adding more stems if necessary to form a full circle. Tie it in place using a piece of string or florist wire. If the plant stems have many little leaves, or if they're wiry and dry, you can even weave them together without using any attachment.

If tying the nest together is too hard, you can clip them temporarily in place while waiting for glue to dry. Don't use glue if you plan to keep the nest outdoors.

If your fresh-cut plants won't stay in position, try hanging up the bundle in a windy area to dry for 24 hours. Some plant stems are easier to bend when fresh, but grasses and straw benefit from drying.

3. Shape the rest of the nest. Grab a second, smaller handful of stems and shape it into a smaller loop. Wedge this inside the larger loop and push it downward to form the base of the loop. Depending on how well the stems fit together and how sturdy you want the nest to be, you may need to use a thread  or glue to fasten the two loops together.

4. Decorate with scavenged materials. Real birds sometimes spend days collecting bits and pieces to build a nest. Hopefully you're a little faster, but you can still have fun gathering objects from nature or your craft boxes. Here are some ideas to get you started:

If you plan to leave the nest outside, only use materials found outdoors, and nothing that could hurt an animal.

Feathers and pieces of eggshell fit the theme. Be aware that collecting most wild feathers is illegal in the United States, but they are mostly harmless from a disease perspective.

Look for twigs, leaves, bark, and moss in interesting shapes and colors.

If the nest is for indoor decoration, you can use bits of string, colored paper shreds, and confetti.

5. Place eggs inside (optional). Finish your art project by placing eggs or fake eggs inside the nest. You can quickly add marbles or colorful pebbles, or hollow out real eggs, decorate them, or even carve them if you have the right tools.

Things You'll Need.

Any long, flexible bundle of stems, grass, or straw, String, florist's wire, or glue (recommended unless stems interweave easily).

Moss, bark, twigs, or other decorative materials, Eggs and egg-blowing materials (optional), Marbles, pebbles, or other "fake eggs" (optional).

Method 2 Attracting Wild Birds to Nearby Nests.

1. Look up the nesting habits of local birds. Find a local wildlife guide at a library or bookstore, or search online for information on local birds. Choose one or more species you want to attract, and look up their nesting habits to discover what shape and style of nest will be most effective.

If you live in North America, NestWatch is an excellent resource for nesting information, and one you can expand with your own data.

2. Leave nesting material in your yard. This is an easy way to attract birds, and might be worth it even if you end up building a full nest as well. If you managed to find specific nesting information, you'll know what materials to leave, but you can't go wrong with a few items from the following list, left in visible locations:

Rigid twigs (for platform nest species) and flexible ones (for cup nest species).

Yard clippings such as dry grass and straw, bits of bark and moss, dead leaves, etc.

Human or animal hair or fur (no longer than 6 inches / 15 centimeters).

Yarn or string.

Mud, spiderwebs, and/or caterpillar cocoons to help birds bind nesting materials together.

Never leave out materials that have come into contact with harsh chemicals, including dye, pesticides, or anti-flea treatments. Dryer lint and clothing rags are not recommended.

3. Provide a variety of plants. If you want to attract birds that make nests in existing holes, leave dead tree stumps and fallen logs in the yard. Living trees and bushes will attract more visible nests from other species, especially if the plants are native to your area. For best results, plant a "staircase" of grass or moss, flowering perennials, shrubs, and trees.

4. Build a nesting box. If there aren't obvious crevices or hollows in your yard, building a nesting box or birdhouse is a simple carpentry project. Make sure the birdhouse is constructed to match the size of the birds you want to attract, or the size of the birds you see flying near your home.

For a higher chance of success, follow birdhouse building instructions specific to common North American species.

Clean out the birdhouse regularly whenever birds are not nesting.

5. Make a bird's nest. Many birds prefer to make their own nest rather than move in to a ready-made one. Lining natural hollows with the nesting materials listed above may give a bird an attractive head start. If you want to make a different type of nest, such as a cup or platform nest, it's best to follow the specific habits of the bird species you want to attract. Each species tends to prefer certain materials.

Placement of the nest is also important. Many bird species hide their nest amidst thick branches, but some prefer more open branches, bushes, or open patches of ground. Look for more information on NestWatch, through online searches, or in a local bird nest identification guide.

Things You'll Need.

Any yard clippings, especially twigs and grasses, String or yarn, Mud, spiderwebs, or caterpillar cocoons.

Human hair or animal fur, Small amount of lumber and nails (to build a nesting box, if hollow logs not available).

Question : Where do you get all the supplies?
Answer : You can find the necessary items on the ground in a park or wooded area, perhaps even your back yard!

Question : How do I make the nest big?
Answer : You can use longer sticks that are pliable enough to bend. Just make sure not to break them.

Question : What if I live in the city?
Answer : If you live in the city and want to attract birds, put up bird feeders. Birds love cracked corn, nyjer seeds, black oil seeds, fruits, and millet. Just make sure to take measures to keep the squirrels out.

Question : Am I allowed to take care of a wild baby bird if its mother is away and it's storming outside?
Answer : No. Leave the baby bird alone. Its mother will come back for it. Wild animals can take care of each other and themselves, they very rarely need our help. The bird will be fine in the storm.

Question : How do I make a bottled nest box?
Answer : Just take a milk bottle (not glass) and make an opening in the body of the box. Then take a rope and make holes at the top and tie the rope to the holes. Make sure you make it tight.

Question : Can I hatch the eggs myself?
Answer : If it is a wild bird egg do not touch it. In the USA it is illegal to take care of wild birds.

Question : Can I look at the eggs when they have been laid?
Answer : You can take a peek, as long as the mother bird is not nearby. Make sure you don't touch the eggs, as you will leave a scent behind that the mother bird can detect.

Question : Are most bird nests made of straw, twigs, and mud?
Answer : Yes, that is what a typical bird nest is made of.

Question : What can I do about wild animals that eat the eggs?
Answer : It depends on the animal. For squirrels, you can't really do anything, but for other birds you can find a better spot to put the nesting box. You shouldn't worry too much, because the mother bird will protect it's young with her life.

Question : Can I make a bird nest from leftover grass from a lawn mower?
Answer : Lawn clippings are probably too short to make a decent nest. Maybe if you collect it and dry it out you can use a few pieces to line the nest.

Tips.

For a quick and easy nest, shred or cut a paper bag into thin strips. Line a bowl with a paper towel, arrange the strips over them, then glue the paper bag strips together and let dry into a nest shape.

It’s fine to take a look at the eggs, but be careful, because smart animals like coyotes can follow you to the nest. If you have no predators in the area, taking a look at the eggs will leave a scent, but birds don’t have a sense of smell.

Warnings.

If a wild bird moves in to your nest, don't disturb it or the surrounding area. Watch the nest from somewhere the bird can't see you, or you may scare the bird away or attract predators to the nest.

Januari 20, 2020

how to make a ball

How to Make a Ball.

Balls provide endless entertainment for kids and adults alike, so make your own if you want a fun toy to play with this weekend. But there are balls for other occasions, too. If you’re having a rough week, for instance, create a stress ball to squeeze when you just want to scream. Or get creative and make balls out of things like rubber bands, fabric, and even cheese!

Method 1 Making a Bouncy Ball.

1. Combine school glue, cornstarch, and any add-ins in a bowl. Stir together the 1 tablespoon (15 ml) of school glue and 1 tablespoon (15 ml) of cornstarch until they’re thoroughly combined, using a spoon or wooden stick. If you want to add any extras, like food coloring or glitter, do so now.

You can use either white or clear school glue. If you use white glue and don’t add any coloring, your ball will be white.

Fun Add-Ins for Your Bouncy Ball

Sprinkle in glitter for a little extra sparkle.

Squeeze in a few drops of food coloring to make a ball in your favorite hue.

Stir glow in the dark paint into the glue for a ball that can be used at night.

Swirl 2 colors of food coloring together if you want a multi-colored masterpiece.

2. Stir warm water and Borax together in a separate bowl. Mix 2 tablespoons (30 ml) of warm water and 1⁄2 teaspoon (2.5 ml) of Borax until the Borax is completely dissolved. Stir vigorously to ensure there are no clumps of powder left in the bowl.

Heat the water in the microwave or on the stove until it’s warm to the touch. It shouldn’t be boiling.

You can find Borax in the laundry aisle of a store.

Borax is safe to use, but it's poisonous if ingested in large quantities. If you or your child get it in your eyes or mouth, contact poison control immediately.

3. Add 1⁄2 teaspoon (2.5 ml) of the Borax mixture in the bowl with the glue. Do not stir the ingredients together when you add them. Simply pour the Borax and water into the other bowl containing the glue and cornstarch.

Set aside the remaining Borax mixture if you plan on making more balls.

4. Let the mixture sit for 15 seconds. This allows time for the Borax to react with the glue, making the polymers of the glue link together which will create the ball shape. If you start stirring right away, the bouncy ball may not form or harden properly.

Set a kitchen timer or use the clock app on your phone to keep track of the time.

5. Use a spoon to combine the ingredients until they’re too thick to stir. Within 1 to 2 minutes, the mixture will thicken. Stir vigorously while the mixture is still liquid to make sure the ingredients are blended well.

Choose a sturdy spoon, like a metal or thick plastic one. Something flimsy, like a plastic spoon, will likely break off in the goo.

If you’ve made homemade slime with Borax, this process is very similar.

6. Remove the mixture and roll it between your hands to form a ball. Once the mixture is too thick for your spoon or stick, pull it out of the bowl and place it between your palms. Roll it around by moving your hands in circular motions until the ball is no longer sticky.

The more you handle the ball, the more firm it will become.

If you’re having trouble getting rid of the stickiness, dip the ball in the Borax water, then roll it a little more. This should remove any tacky texture.

7. Let the ball harden for about 10 to 20 minutes before you use it. This dries the ball a little more, so that it’s extra bouncy. If the ball starts to flatten while it sits, simply roll it back into shape when you’re ready to play with it.

Once you’re done playing, store the ball in an airtight container to prevent it from drying out. Keep it in a cool, dark place, like the pantry.

If stored properly, your ball could last for up to 6 months. It won’t go bad, but it will dry out eventually.

To make more bouncy balls, mix up another batch of glue and cornstarch and use some of the leftover Borax and water mixture.

Things You'll Need.

2 tablespoons (30 ml) of warm water, 1⁄2 teaspoon (2.5 ml) of Borax, 1 tablespoon (15 ml) of school glue, 1 tablespoon (15 ml) of cornstarch.

Spoon or wooden stick, 2 cups or small bowls, Food coloring or other add-ins (optional), Airtight container (optional).

Method 2 Creating a Paper Soccer Ball.

1. Trace 20 hexagons on white paper, then cut them out. Draw your hexagons on the paper with a template, making each side the exact same length. Use scissors to carefully cut along the traced shapes, then set them aside.

If you want a life-sized soccer ball, make the edges 2 inches (5.1 cm) long.

To make a template, use a ruler to draw the hexagon shape on a piece of cardboard. Cut it out and trace around it with a pencil to make each paper hexagon.

Cardstock is the best type of paper to use for this craft. It’s sturdy enough to hold the shape of the ball yet still easy to fold.

2. Trace and cut out 12 black pentagons with sides the same length. The edges of the black and white pieces need to be equal so that they fit together properly. Use a template to draw your pentagon shapes, then cut them out with scissors.

For example, if you’re creating a life-sized ball, make your pentagon sides 2 inches (5.1 cm) long.

You can use a different color paper instead of black, or get creative and make a multi-colored ball with a variety of shades.

Cut a pentagon template out of cardboard to trace on the black paper so that the pieces are all equal size.

3. Fold up a thin border around each hexagon and pentagon. This edge will allow you to build your ball seamlessly, so there are no gaps between pieces. You only want to fold enough of each edge to have a place to apply glue or tape. Keep the border size equal on each piece so they all remain the same size after folding.

To fold the same border on each piece, trace the border before you fold, using a ruler to ensure each edge is an equal width.

Use a straight edge, like a ruler, to help you fold the edges in a perfect line.

If the edges are crooked, re-fold them. They have to be straight for your ball to be the right shape.

To make folding easier, snip off the corners of your border before you fold. This allows you to fold the edges up without dealing with corners that crumple up or stick out.

4. Apply glue or tape to the folded edges of each piece. This is how you’ll stick the the pieces together to form the ball. Swipe glue on each of the edges of all the hexagons and pentagons. You can also use a strip of tape on the edges instead.

A glue stick will work better than liquid glue to prevent the paper edges from getting soggy.

If you are slow at putting the ball together, you may want to apply the glue as you go, rather than all at once. Otherwise, it will dry out on the final pieces by the time you get to them.

5. Attach 5 white hexagons to 1 black pentagon. On a standard soccer ball, each black piece is completely surrounded by white pieces. Press 1 white hexagon onto each edge of a black pentagon. Hold the edges together until the glue dries.

If you’re using a glue stick, the glue will dry almost instantly. Wait about 5 to 10 seconds while pressing the edges against one another.

6. Continue gluing the pieces together in this pattern, forming the soccer ball. On the other edges of the white hexagons that you attached to the original pentagon, glue more black pentagons. Don’t forget to glue the white edges that touch each other, too. Once you connect all of the pieces, you’ll have a ball shape.

A black piece should never touch another black piece. However, white edges will touch other white edges.

If you’re having trouble visualizing the pattern, look up an image of a soccer ball online as a guide.

You can stuff the ball with shreds of paper if you want to create a fuller shape.

Things You'll Need.

Black and white sheets of paper, Scissors, Cardboard.

Pencil or pen, Glue stick or tape, Homemade Stress Ball, 12 in (30 cm) latex balloon.

Method 3 Using Play Dough for a Homemade Stress Ball.

1. Use your hands to roll play dough into a long shape. Place a pile of play dough on a flat surface, then gently roll it out with the palms of your hands. This should form what looks like a snake.

It doesn’t matter what color play dough you use, since it will just be going inside the balloon.

Buy pre-made play dough or make your own at home.

If you buy play dough, use one 5 oz (140 g) container per balloon.

2. Insert the play dough into the balloon. Stretch the neck of the balloon open as wide as you can, then stuff the play dough snake into the balloon. The play dough should fill the balloon just to the base of the neck.

If there is a lot of empty space in the balloon, add more play dough.

Stretch out the neck of the balloon before you insert the play dough to loosen it up.

This step is easier if you have someone else hold the balloon open while you put the play dough inside.

3. Tie a knot in the neck at the top of the balloon to secure it. This will keep all of the play dough inside the balloon. Wrap the neck around your finger to make your knot, tying it as tightly as possible.

If you want extra protection, you can place your original balloon inside another empty balloon before tying it shut. This adds a double layer in case you poke a hole.

You can decorate your stress balls with permanent markers if you’d like. For example, you could draw a funny face or write a calming phrase, like “just breathe.”

Things You'll Need.

Permanent marker (optional).

Method 4 Forming Other Types of Balls.

1. Build a rubber band ball for a creative way to store supplies. Instead of tossing your rubber bands in a drawer, keep them together in 1 big ball. Fold up a thick rubber band to form the center, then begin wrapping all of other bands around it. Criss-cross directions often to round out the ball.

You can also wrap your bands around a bouncy ball or crumpled-up piece of paper for a larger ball.

Start with smaller rubber bands, then add the larger ones as the ball gets bigger.

2. Sew a fabric ball if you want a soft toy for kids or pets. Young children, particularly babies, could get injured by hard rubber balls. Instead, stitch together a ball out of strips of fabric, then stuff it with polyfill for a plush feel or use dried beans for a bean bag texture.

This also makes a great pet toy for dogs to chew on or for cats to bat around. If the ball is for a pet, pick a durable fabric like vinyl or nylon and keep your pet in sight as it plays with the ball.

You can use a sewing machine to make your ball or sew it by hand.

Cotton is ideal for kids’ toys since it’s a long-lasting and soft fabric that’s easy to wash.

3. Use ice to make a ball for a unique cocktail add-in. Not only do ice spheres look much cooler than regular cubes floating in your drink, they also melt slower, so your beverage doesn't get watered-down as quickly. Fill a silicone ice ball mold with water, then place it in the freezer for at least 6 hours, or until the balls have set and hardened.

For extra flair and flavor, add things like fresh herbs or edible flowers into the water in the mold before it freezes.

You can buy ice ball molds from a kitchen store or online retailer.

4. Make a cheese ball if you’re having people over for dinner or a party. When it’s your turn to play host or hostess, whip up a cheese ball as an impressive appetizer. Mix together cream cheese and other soft cheeses, shape it into a ball, then chill it in the refrigerator. Roll it in chopped nuts and other garnishes before serving.

You can substitute mascarpone, neufchatel, or goat cheese for the cream cheese if you’d like.

Pair any type of softer cheese with the creamy base, depending on your taste preferences. As long as it’s not a dry, crumbly cheese like parmesan, it will work.

Serve a cheese ball with finger foods for dipping, like crackers, pretzels, or raw veggies.

Warnings.

Borax is poisonous. Get help immediately if you accidentally ingest it or get it in your eyes.

Never let young children handle Borax without close supervision.

Januari 20, 2020

how to make a dog out of mardi gras beads

How to Make a Dog out of Mardi Gras Beads.

After a good celebration, you might find yourself with a whole bunch of leftover plastic bead necklaces. This simple craft is a cute and easy way to make use of these beads. They are made just like balloon animals, by twisting the necklace into the right shape.

Method 1 Bead dog.

1. Find the two beads melted together to form the join on the bead necklace. Give this a tug to break it. Then snip off the two "bad" beads with the melted sides.

2. Cut a string of beads twelve beads long and another two beads long. These pieces will form the body and the ears.

3. Twist four beads together behind the second bead on the long string. This will make a little square. One bead should be sticking up. This is the tail of the dog.

4. Do the same thing to the other side of the long piece except that after you twist the beads, 2 beads should be sticking out for the head. You should have one bead in between the the two sets of little squares.

5. Wrap the two beads behind the first bead on end with the two beads sticking out. This will make the ears and completes the dog.

6. Finished.

Method 2 Mardi Gras bead poodle.

1. Cut four segments from the plastic bead necklace. Cut one segment with 4 beads and three segments with 2 beads.

2. Lay out the 4-bead segment. Pick up one of the smaller segments.

3. At the space between the tip of the 4-bead segment and the second bead in that same segment, pull the small segment up so that the small segment crosses in between the beads on both segments.

4. Tighten the ears. Do this by twisting them around once.

5. Repeat with the other 2-bead segments. Except, this time, pull the small segments down instead of up, so that the ears stick up. The the legs point will also down, so the dog can stand.

6. Completed. This now makes a fine poodle.

Question : Method 2 looks too cartoonish, so I cannot see the character of the poodle. Please help.

Answer : Because of the size of the beads, the final project is the equivalent of a stick figure drawing in method 2. Method 1 is a basic "dog." To make a larger animal, it requires the beads to be supported by a wire frame to give it a realistic shape. Floral wire holds well for this purpose. Use a stick figure design with the wire, then wrap the beads around the wire. Since it is larger, try using the necklace as is for a double strand of beads.

Tips.

There are lots of things that you can do with these dogs such as adding then to a key ring, using in crafts, gluing onto hair accessories or giving them away as party treats.

Warnings.

All beads can be a choking hazard. Make sure to keep them away from small children and pets.

Things You'll Need.

A plastic Mardi Gras bead necklace

Scissors

Januari 17, 2020

how to making a craft penguin for children

How to Making a Craft Penguin for Children.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.

2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.

3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.

4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.

5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.

6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.

For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.

7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.

8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.

A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.

9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.

Things You'll Need.

Scissors.

One white, one black, and one orange sheet of construction paper.

Glue stick.

Googly eyes.

Crayons.

Desember 22, 2019

how to make a paper dog

How to Make a Paper Dog.

There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!

Method 1 Folding an Origami Dog.

1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.

If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.

2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.

Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.

3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.

It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.

4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.

There should be an “X” formed by the creases on the unfolded piece of paper.

5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.

Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.

6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.

Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.

You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.

7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.

There should be an open triangle when you look down at your square.

8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.

Leave the top and bottom flaps in place and don’t do anything to them at this point.

This fold will eventually become the dog’s tail.

9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.

Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.

10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.

At this point in the folding process, you’re making the dog’s head and legs.

11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”

The bottom edge should be in line with the ground if you were to pretend to stand it up.

12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.

Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.

13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.

The crease line creates a jawline for the dog.

14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.

Once you get the hang of the pattern, you can make an origami dog in just a few minutes.

Method 2 Creating a Dog Head.

1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.

If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.

2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.

To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.

3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.

Take your time when making your folds and line up the edges neatly.

4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.

You’ll use the center crease as a guide for your future folds.

5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.

Keep the fold lined up with the center crease to create a proportional face.

6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.

When you look down at your paper, you should see a very angular-looking dog head.

7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.

If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.

8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.

You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.

Method 3 Making a Hand Puppet.

1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.

Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.

2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.

Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.

3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.

If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.

4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”

The top and bottom sections are where you’ll place your fingers to make the puppet talk.

5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.

For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.

6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!

To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.

Tips

Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.

If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.

Things You’ll Need.

Origami paper, Marker, Origami paper, Marker, Construction paper, marker, Scissors, Glue stick.

Desember 19, 2019