How to Make a Dinosaur Tail

How to Make a Dinosaur Tail.

A dinosaur tail can be used in a Halloween costume or be a new accessory for a dress-up game. Best of all, this fun, brightly-colored tail only takes 1-2 hours to make. If you’re familiar with a sewing machine, you can stitch your dinosaur tail together. For a quicker assembly, you can use hot glue. It only takes a few pieces of fabric and some fiber stuffing to take your child’s imagination to the next level!

Method 1 Creating a No-Sew Dinosaur Tail.
1. Cut a series of triangles into a long strip of fabric. Snip out a line of connected triangles from the strip. The total length of the strip should be 24 inches (61 cm) by 2 inches (5.1 cm). When you’re done, the felt should look like a miniature mountain range. Set this aside for later.
This strip will become the spikes of the dinosaur tail, so feel free to pick a bright, fun color!
When flattened, the fabric will look like a row of diamonds. This will be fixed later on when the spikes are folded and glued together.
Use fabric scissors for a quicker and smoother cut.
2. Trace the edge of a bowl onto the main fabric and cut it out. Flip over a bowl and trace its circumference onto the felt. The diameter of the bowl will be the width of your dinosaur tail, so make sure that it’s wide enough.
3. Cut out 2 strips of fabric for the waist straps and glue them in place. Use fabric scissors to cut 24 inches (61 cm) by 2 inches (5.1 cm) rectangular strips from the tail fabric. Then, fold in the edges lengthwise and glue them into place. Fold the fabric in half again and glue both sides together so the straps are less than 1 inch (2.5 cm) thick.
4. Crease and glue the line of fabric spikes together. Use short lines of hot glue to connect the folded spikes. Instead of looking like a row of diamonds, the felt will now look like a row of triangles.
5. Cut a large, curved triangle out of fabric to make the base of the tail. Measure out a curved triangle along the edge of a folded piece of fabric. You don’t have to use specific measurements, but make sure that the tail will fit around your circular piece.
6. Attach the spikes to the inner seam of the tail with hot glue. Use small lines of hot glue to connect the felt spikes with the outer edge of the tail. Apply glue on both sides of the spikes, as this piece will hold the tail together. Put pressure on the glued areas with your fingertips to secure the spiked tail into place.
Use additional glue at the pointy end of the tail to provide extra support.
Add extra glue as needed to connect the rest of the tail together.
7. Put fiber stuffing into the tail until it’s fully stuffed. Take a bag of fiber filling and stuff the tail completely. Place as much or as little stuffing as you would like inside.
Make sure that the pointy end of the tail is completely filled before continuing to stuff the rest.
8. Glue the waist straps and circular piece to the inside of the tail’s base. Take the waist strips and glue them on opposite ends of one another, using small lines of hot glue. These straps should be perpendicular to the line of spikes. Make sure that the circular base is glued snugly over the waist straps and is covering the end of the tail.
You can tie the waist straps together to secure the tail when your child wears it.

Method 2 Cutting and Sewing a Tail Shape.
1. Fold the fabric in half and mark 12 inches (30 cm) above the crease. Take 1 yard (0.91 m) of fabric and fold it in half horizontally. Use a tape measure (preferably non-mechanical) and mark 12 inches (30 cm) above your starting point on the fold. This indicates the height of your dinosaur tail.
Make sure that your measuring tape expands to at least 3 feet (0.91 m).
2. Make a second mark 24 inches (61 cm) down the fabric. Measure 24 inches (61 cm) from your starting point and mark the fabric. This 24 inches (61 cm) distance will serve as the length of your dinosaur tail.
Make sure that you have enough fabric for these measurements.
3. Make a third mark 2 inches (5.1 cm) above the second mark. Take your measuring tape and make a dot 2 inches (5.1 cm) above the second mark. This third measurement represents the pointy, bottom end of the tail.
4. Connect the 3 marks with a marker and cut out the tail shape. Use a fabric marker to sketch the line that connects these three points before removing the piece with scissors or a rotary cutter. Rotary cutters can be found at most craft stores, and provide a more even and exact cut along the edge of your fabric.
If you want to make your lines exact, use these measurements to sketch and cut a template out of cardboard beforehand.
5. Trace a plate on fabric twice to create 2 circles for the tail’s base. Place a ceramic plate onto the fabric and cut around it with scissors or a rotary cutter. Repeat this process so that you have 2 circles. The diameter of this circle will be the width of your dinosaur tail.
Use folded fabric if you want to cut 2 circles out at once.
6. Measure and cut out 2 pieces of fabric to create the waist straps. Use a measuring tape to mark and cut out 2 strips of fabric. The length should be 12 inches (30 cm), and the width should be 4 inches (10 cm).
These strips will help attach the dinosaur to a child’s waist.

Method 3 Adding the Spikes and Waist Straps.
1. Sketch a series of triangles onto a piece of felt using a fabric marker. Use a ruler or measuring tape to sketch a row of triangles onto the felt. Make the triangles, which will be the tail spikes, about 2 inches (5.1 cm) tall and 2 inches (5.1 cm) wide. Ensure that there’s 0.5 inches (1.3 cm) between each spike.
You can make the spikes bigger or smaller, depending on how you want the tail to look at the end.
You can also make individual triangular spikes.
2. Arrange the cut spikes on the edge of the tail fabric and pin them in place. Use fabric scissors to cut the spikes out of the felt. Begin constructing your dinosaur tail by positioning the trail of spikes between the folds of the base tail fabric. Pin the spikes so that they face inward, as you will be sewing the fabric from the inside out.
3. Use a sewing machine to attach the spikes to the main fabric. Feed the fabric through the machine to stitch the base tail fabric and spikes together. Go along the curved shape of the tail, leaving less than a 0.5 inches (1.3 cm) of space between the stitches and the fabric’s edge.
Pinch and tug on the fabric on the inside of the tail to pull the tail right side out.
Remember to remove the pins from the fabric as you sew.
4. Fold and pin the waist strap fabric at the ends before sewing the edges together. Crease the fabric along the center so that the short ends are touching, and use a few pins to secure the fabric in this position. Stitch the edges together lengthwise, but leave the shorter end open. Pinch the fabric on the inside of the stitching to pull the straps right side out.
You’ll be stitching the shorter, unsewn ends of the waist straps into the base of the tail.
5. Stitch the Velcro rectangles to the straps and attach the waist straps to the tail. Take a small rectangle of Velcro and place it on the sewn end of the waist strap before stitching it into place with a sewing machine. Then, take the unstitched ends of the waist straps and pin them to the inside of the tail. Make sure that the straps are placed perpendicular to the spikes before sewing them into place. Check to see that the strap is long enough to wrap around a child’s waist. Pin the straps onto the tail and sew them into place.
You can purchase Velcro at a craft store.
You can also sew Velcro by hand.
6. Pin the base circles along the edges and stitch together. Take the 2 base circles and secure them with pins along the edges. Make sure that the circles are centered against one another before you sew them together.
Leave at least 1 inch (2.5 cm) of space to turn the circle right side out.
After sewing the edges together, pinch and tug at the inner fabric of the circle to make pull it right side out.
7. Fill the tail with stuffing until it has a firm shape. Take fiber filling and stuff the base of the tail. Use as much fiber as you need to completely fill the dinosaur tail.
You can buy fiber filling at a craft store. You may need more than one bag to fully stuff the tail.
8. Use a ladder stitch to close off the base and complete the tail. Tuck and fold the excess fabric into the tail before sewing it shut with a ladder stitch. This part can be completed by hand.
The ladder stitch helps all portions of stitching to look uniform.

Tips.
Iron your material beforehand to remove any wrinkles. Take an iron and apply heat to your fabric in long, even strokes. Loosely woven fabrics like cotton and linen are great options to make a dinosaur tail, or you can opt for satin if you want a shinier look. Check the care label on your fabric to ensure that it can be ironed before you proceed.
Things You’ll Need.
Creating a No-Sew Dinosaur Tail.
Fabric.
Felt.
Bowl.
Fabric marker.
Hot glue gun.
Hot glue sticks.
Scissors.
Cutting and Sewing a Tail Shape.
Fabric.
Measuring tape.
Fabric marker.
Scissors.
Rotary cutter (optional).
Plate.
Adding the Spikes and Waist Straps.
Felt.
Pins.
Sewing machine.
Scissors.
Small Velcro rectangles
Fiber stuffing.
Measuring tape.
Fabric marker.
Sewing needle.
Thread.

Maret 21, 2020

how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to paint a row of bird houses in watercolor

How to Paint a Row of Bird Houses in Watercolor.

Bird houses can be as plain or as ornate as houses for people, but, as a subject for an art work, they are a lot less intimidating. While we enjoy seeing and thinking about homes for birds, we might live where it is impractical to install an actual bird house. The solution is to paint a picture of bird houses. Because of its simplicity, this project is virtually fail proof, even for a non-artist. So, go ahead, tackle architecture, but begin on a bird's scale.



Steps.

1. Cut a rectangle of 140 lb. cold pressed watercolor paper and draw a pencil line 2" (5cm) up from the bottom edge to create a base for the houses to stand on.  Later, you can paint this to represent a limb of a tree or a platform.

2. Draw a simple house starting with a square 3½ in (10cm) on a side, in pencil to represent the body of the house.  To construct a slanted roof, the center point (1¾", 5cm) and draw a line upward a few inches. Close the roof by dropping two lines from the center point to each side of the house.

3. Alternatively, trace a miniature wooden birdhouse purchased from the craft or discount store. Simply place the house on your paper, back down and draw around it in pencil.

4. Repeat drawing houses until you have four in a row. Allow a slight space between them. Arrange them according to your taste, varying sizes and shapes.

5. Add details to each house such as entry holes for the birds, a picket fence, shingles, siding, or anything you wish. Go to the internet to look for ideas.

6. Embellish the houses with vines, flowers, leafs, beds, berries, tree branches, etc. Use the vines as a device to intertwine and connect the houses and it will lead the viewer's eye through the composition.

7. Put a bird or two in the picture. Draw one from your imagination or go online for pictures of birds. Put them standing still or in motion, flying into the picture.

8. Prepare your watercolors by adding water to each pad if you are using pan paints. If you are using tube paints, set up your palette with primary, secondary and neutral colors. Remember to leave the center part of the palette open for mixing colors.

9. Set out brushes, a ½" (1cm) flat for big areas, and some pointed ones in various sizes.

10. Begin painting by pulling a color for the body of the house, diluting it with clear water and making a puddle large enough to cover the area you wish to fill.

Repeat the process with a different color for each house.

Paint the houses, the area beneath the houses, and the sky.

Allow the paper to dry before attempting to paint over it or the colors will run into one another. Use a hairdryer to hasten the process, if desired.

11. When dry, paint the greenery, flowers, birds, sun and any other touches you can think of.



How to Make a Tweeting Bird in a Cage from Plastic Straws. Tips.Try a technique called negative painting for a white object, such as a picket fence or a daisy. You simply paint around the object, keeping the white paper as your white color. Use a small, pointed brush and dip from the puddle on your palette that is the color the flower or fence is standing against.

Dry the paint before attempting to add a new layer.

If tiny hairs get in the paint from the brush, allow the area to dry and brush the hairs away. If you try to pick them off with your fingers, you will mar your wash and leave finger marks.

Februari 08, 2020

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020

how to make a beaded lizard

How to Make a Beaded Lizard.

Here's a cute, fun, and creative afternoon activity that you can make and attach to your backpack or even wear as a necklace. All it takes are some beads, string, and a keychain clasp.

Method 1 Preparing the Body.

1. Cut a roughly three-foot length of 1/8th-inch ribbon or string. The longer the string, the longer the lizard. Three feet is a good start.

2. Fold the string in half so that the two ends meet. This will lead to a loop at the other end of the string.

3. Take the loop and run it through the bottom of a keychain clasp. Really, any sort of clasp will work. All you need to do is create a slipknot around the clasp. You should have your loop on one side of the clasp, and the long excess string on the other.

4. Pull the ends through the loop to create a slipknot. Reach into the loop and pull the strings through, pulling until tight. This creates a simple slip knot that will hold the lizard in place as you work.

5. Tape the clasp down to the table so that the strings drape towards you. Make sure the strings are not tangled up, and that you can clearly tell which string is the left string and which one is the right.

Method 2 Building the Head and Neck.

1. Add two beads to the leftmost string. These beads will be your body, so choose the color you want for the bulk of the lizard. Don't feed the beads all the way down; just let them dangle a bit towards the end. In this video, the body will be yellow.

2. Thread the right string through the beads the opposite way. If the leftmost string enters through the left, thread this one through from the right. You'll have both string going through the center of the two beads in opposite directions.

3. Pull both ends of the strings until the beads slide up to the keychain clasp. Lightly pull on the opposite ends to force the beads up to the top.

4. Feed three more beads -- two eyes and a body color -- onto the leftmost string. You want to sandwich the body bead with the two eye colors. Here, the eyes are green and the body is yellow, so you'd put them on as green, yellow, green.

5. Slide the right side through the beads and pull both ends until the beads slide to the top. Repeat the same procedure as you did with the first two body beads. Slide the three beads on the left string, thread the right through them, then pull both strings to move the beads to the top.

6. Repeat the whole procedure with two more beads to make the "neck." Take two body colors, thread them on the left, slide the right through, and pull tight. This is your neck.

7. Take three more body beads and pull them through. Again, it is the same procedure. For a little flair, you can use a different color for the center bead here, allowing you to put a "stripe" on your lizard's back.

These three beads are the beginning of the "back." You'll need to start the limbs after this.

Method 3 Building The Legs.

1. Set aside two beads for the body and three other beads for the feet. Here, the body beads are still yellow and the feet will be black.

2. Thread the two body beads on the left string and slide them down close to the body. Push them almost all the way to the body. These are your legs.

3. Slide the black beads on, just above the legs. Keep them close, but separated.

4. Thread the end of the left string through the two beads for the leg. You just want to thread through your two yellow beads, not the three for the feet.

5. Pull the string tight to pull everything together, adjusting slightly as necessary. Use your fingers to make sure nothing bunches up. This is your first leg! Note how it only requires the left string to make -- you should never touch the right one when making the left leg.

6. Repeat the process with the other string to make the right leg. Once done, it is time to move back to the body.

Method 4 Finishing the Body and Tail.

1. Build three more body rows identically to the first. Put three beads on the left string, remembering to alternate them if you're doing a two-colored body. Then slide the right string in the opposite direction as the left and pull the two ends to slide the beads up to the body.

You need three more rows before starting the feet again.

2. Make two more legs the same way you made the first two. After the three lengths of the body, add two more legs. The process is identical.

3. Add two more body beads, to make the base of the tail (identical to the neck). You should have the process down pat by now. Two beads on the left string, feed through the right string and pull tight.

4. Slide the first tail bead on the left string, thread the right string through the opposite side, and pull. The tail is simply the same process as the body, but its only one bead per layer. You can choose any color you want. Alternating looks great too, and you can use as many beads as you want for the length of tail you like.

5. Tie a double knot at the end of the tail to keep the beads in place. You can tie any knot you want, but a simple square knot will do just fine. You can use the knot used to tie your shoes as well, but make sure you double knot it.

Question : What can I do if I have lost 2 beads?
Answer : A good way to solve this without doing much damage would be to shorten the tail by two beads.

Question : What size beads should I use?
Answer : The best beads to use are pony beads. Pony beads measure about 6 by 9 millimeters, and the hole is about 4 millimeters.

Question : How can I give the lizard a longer nose?
Answer : After you secure the string to the clasp, you could first tie one bead on the string. Then you would make the lizard as explained in the article, which would give it a slightly longer nose.

Question : Can I use thread instead of string or ribbon?
Answer : Yes, you can use thread instead of string or ribbon, but I would just make sure your thread is thick enough that it won't break.

Question : What do I do if I run out of ribbon in the middle?
Answer : Undo your previous row of beads and attach new ribbon. Tie as small of a knot as possible. As a general rule, I use one inch of material per bead.

Question : What are the best beads to use for making a beaded lizard?
Answer : The best beads to use for making this are horse beads. This is because they are thick and are durable, you can buy them at any craft store or bead store.

Things You'll Need : Pony Beads (about 60), 1/8th-inch wide ribbon, Scissors, Beads, Tape, Nice flat surface (recommended).

Tips : You can mix and match colors and lengths with ease once you get used to the process. For a bigger lizard, add one bead to each smaller section (legs, head, neck) and two beads to each body section. This will keep the proportions roughly the same.

Januari 16, 2020

how to building a papier mache dino

How to Building a Papier-Mâché Dino.

With the right supplies and a bit of time, you can make your very own paper dinosaur that stands or moves. If you'd like a bigger craft project, you could even attempt a paper mache dinosaur or an origami dinosaur! Depending on the colors that you use, you can make your dinosaur look realistic or cartoonish.

Steps.
1. Blow up a balloon, tear newspaper into strips, and make a papier-mâché paste. Blow up a balloon to your desired size. Next, tear some newspaper into narrow strips, about 1 by 3 in (2.5 by 7.6 cm). Lastly, prepare your preferred papier-mâché glue or paste.

The most popular papier-mâché paste is just 1 part water and 1 part PVA glue (white school glue).

Start with just 1 or 2 sheets of newspaper; you can always make more strips.

Don't cut the strips, or the edges will be too sharp and create creases. Tearing them will give you a smoother finish.

2. Dip the strips into the paste, then apply them to the balloon. Run each strip of newspaper between your fingers after dipping it in the paste; this will remove any excess glue. Make sure that the strips are all going in the same direction as you apply them.

Overlap the strips a little, such as by 1⁄4 to 1⁄2 in (0.64 to 1.27 cm).

Keep the balloon in a cup or bowl so that it doesn't roll around. You may have to let 1 side of the balloon dry first before doing the other.

Leave a coin-sized space at one end of the balloon exposed so that you can pop the balloon later.

3. Apply 2 more layers of papier-mâché. You probably don't need to use the glue for the second layer; the wet strips already adhered to the balloon should be enough for the new ones to stick to. If the balloon starts to get too soggy, however, let it dry a bit, then continue working.

Consider using white tissue paper for as a fourth and final layer. This will give you a smoother base and help the paint show up better.

If you choose to use tissue paper, then make sure that you tear it into 3 by 1 in (7.6 by 2.5 cm) strips as well.

4. Let the strips dry overnight, then pop and remove the balloon. You may have to wait even longer than that, depending on how dry or humid it is in your home. In fact, it would be a good idea to poke your finger under the papier-mâché; if it feels wet, give it a little more time.

This completes your dinosaur's body.

Don't worry about the hole left by the balloon. You'll end up covering it with the dinosaur's head or tail.

5. Tape paper towel roll segments to the balloon for legs. Turn the papier-mâché balloon on its side, then use masking tape to secure the legs to the bottom.

Don't use clear tape; it won't stick to the papier-mâché.

You can also just cut 2 empty toilet paper rolls in half and use those instead.

6. Use cardboard, paper towel tubes, and foil to make the other limbs. Scrunch up aluminum foil into a ball to make a head, and then use aluminum foil shaped into a cone for the tail. The size and shape for each depends on what type of dinosaur that you're making, so look at some reference pictures. Here are some more ideas to get you started.

Triceratops: cut a round, scalloped shape out of cardboard for the fan. Use foil to make the horns.

Stegosaurus: cut triangles out of cardboard for the fins.

Apatosaurus/brontosaurus: use a paper towel tube to make the neck.

7. Tape the pieces to the body with masking tape. Take 1 of your pieces, and hold it against the balloon where you want it to go. Secure it with strips of masking tape until the seam is completely hidden. Again, don't use clear tape, because it won't hold.

Triceratops: tape the fan to the balloon first, then add the head (you may have to use hot glue to secure it). Finish by sticking the horns to the head.

Stegosaurus: tape or hot glue the head to 1 side of the body and the tail to the other. Use strips of tape to add the fins down the back and tail.

Apatosaurus/brontosaurus: tape the head to the long neck first, then tape the head to the body. Add the tail to the other side of the body.

8. Cover the pieces and the seams with more papier-mâché. Start by applying strips of papier-mâché to the seams. After that, cover the shapes themselves. If the pieces feel unstable, add more papier-mâché to the seams.

You may have to tear more strips of newspaper and prepare more papier-mâché paste for this.

Consider making some smaller strips for sharp curves and tight corners.

If the hole from when you removed the balloon is still visible, cover it up with more papier-mâché.

9. Wait for everything to dry. How long it will take for your project to dry really depends on what the weather is like. Papier-mâché will dry a lot faster on a hot, dry, sunny day than on a cold, wet, day. Be patient!

10. Paint the dinosaur as desired, then let the paint dry. Acrylic craft paint will work just fine for this, but you can use poster paint too. You can use realistic colors for your dinosaur, like gray, brown, and green, or you can use fantasy colors, like pink, purple, and blue.

For a nicer finish, paint the dinosaur white first, then let the paint dry. This will give you a clean "canvas" to work on.

Don't forget to add eyes and a mouth. You can paint the eyes, or glue googly eyes on instead.

How long it will take for the paint to dry will depend on what type of paint you're using. Plan to wait about 15 to 20 minutes, however.

Tips.

Your dinosaur doesn't have to look realistic at all. You can even make it pink and blue!

Look up pictures of cartoon dinosaurs. They have simpler shapes, which are easier to copy to your paper.

Things You'll Need.

White school glue, Newspaper, Balloon, Cardboard, Aluminum foil, Empty toilet paper rolls, Masking tape, Acrylic paint or poster paint, Scissors.

Desember 25, 2019

how to make a paper dog

How to Make a Paper Dog.

There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!

Method 1 Folding an Origami Dog.

1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.

If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.

2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.

Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.

3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.

It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.

4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.

There should be an “X” formed by the creases on the unfolded piece of paper.

5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.

Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.

6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.

Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.

You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.

7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.

There should be an open triangle when you look down at your square.

8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.

Leave the top and bottom flaps in place and don’t do anything to them at this point.

This fold will eventually become the dog’s tail.

9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.

Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.

10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.

At this point in the folding process, you’re making the dog’s head and legs.

11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”

The bottom edge should be in line with the ground if you were to pretend to stand it up.

12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.

Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.

13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.

The crease line creates a jawline for the dog.

14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.

Once you get the hang of the pattern, you can make an origami dog in just a few minutes.

Method 2 Creating a Dog Head.

1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.

If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.

2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.

To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.

3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.

Take your time when making your folds and line up the edges neatly.

4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.

You’ll use the center crease as a guide for your future folds.

5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.

Keep the fold lined up with the center crease to create a proportional face.

6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.

When you look down at your paper, you should see a very angular-looking dog head.

7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.

If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.

8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.

You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.

Method 3 Making a Hand Puppet.

1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.

Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.

2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.

Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.

3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.

If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.

4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”

The top and bottom sections are where you’ll place your fingers to make the puppet talk.

5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.

For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.

6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!

To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.

Tips

Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.

If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.

Things You’ll Need.

Origami paper, Marker, Origami paper, Marker, Construction paper, marker, Scissors, Glue stick.

Desember 19, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make minnie mouse ears

How to Make Minnie Mouse Ears.

Mickey's sweetheart has the fashion sense to wear a bow in her ears, but Minnie mouse has very similar ears to those of her beau. In some special costumes, Minnie has also been known to wear a crown, a Santa hat, and other seasonal accents between her ears. The ears are always black, of course, and the bow usually red with white polka-dots, but you can choose your favorite patterns and colors to make the bow you place between your Minnie Mouse ears.

Part 1 Making the Ears.

1. Gather the material for making your mouse ears. You will need black felt to give your mouse ears color and texture. A cardboard core will give your fabric rigidity and form. If you don't have any cardboard, you might be able to layer several pieces of rigid construction paper together with glue as a substitute. The material you use for the ears should be stiff enough to keep it from flopping around loosely once attached to the headband and if you don’t have felt, you can paint or color the cardboard black.

Black felt, Cardboard, Rigid construction paper (optional), Household glue, Plain paper, Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long).

You should be able to purchase everything you need for this project at your local fabric or craft store.

2. Purchase a headband and tools, if necessary. The headband can be any color, but it should be at least ½" (1.27 cm) thick. You will eventually attach your mouse ears to the headband, so thicker headbands might give your mouse ears greater stability. Including a head band, you should also purchase the following tools.

Headband, Hot glue gun (and glue), Household glue, Pencil, Pipe cleaner. Scissors.

3. Make two identical paper circle templates. You should trace two circles on your paper with a pencil or your chalk. Each circle should be between 3” and 5” (7.6 and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of the circle. These templates will be used to assist you in outlining the dimensions of your mouse ears on both fabric and cardboard.

The tabs will on the bottom of your circles will be used to secure the ears and the headband together.

You might be able to use the base of a bowl to help you in drawing identical circles for both of your templates.

4. Outline your felt circles onto your felt. Place your paper template on top of the felt and trace the circle with chalk onto it. You could use a piece of tailor’s chalk, or even regular chalk in a pinch. This way, you can wipe any leftover chalk away with a damp cloth.

Make four felt circles for every pair of ears you make. You will need to glue felt to the front and back of your cardboard core to make your mouse ears uniformly black.

5. Cut your felt circles. Take your scissors and follow the chalk outlines you've drawn to cut free your felt circles free from the fabric.You can add some jazzy flair to your mouse ears by using zig-zaggy pinking shears.

Pinking shears will add a cute border to your fabric and prevent your fabric from becoming frayed.

6. Trace cardboard circles for your mouse ears. These cardboard circles will form the core of your mouse ears, making it possible for them stand up straight, just like Minnie's! Use your pencil or a piece of chalk to trace the circle template onto the cardboard.

You will need two cardboard circles for every pair of ears you make.

7. Cut out your cardboard circles. Using your scissors, follow the chalk or pencil outline you drew with your templates onto the cardboard. Be sure you don't cut off your tabs! These will be necessary to connect your mouse ears to the headband.

You may need to touch up your cardboard and felt circles/tabs to make them as close to identical as possible.

Compare and trim your felt and cardboard circles by holding the cardboard and felt pieces together in a stack. Then you can trim down any irregularities.

8. Glue the felt to the cardboard. Household glue should be sufficient to attach a piece of felt to the front and back of each cardboard circle/ear. Drizzle glue back and forth along the cardboard and press your felt into place. Press the felt to the glue firmly for five to ten minutes help it set.

To create the best bond between your glue and the felt, you may want to allow your glue to rest for 30 minutes to an hour.

Part 2 Attaching the Ears to the Headband.

1. Spread hot glue along the tabs of the ears. Regular household glue won’t hold up to wear and tear as well as hot glue. The special glue used in hot glue guns, however, is much more durable. It will create a firm bond between ear and headband.

You'll have to move quick after you apply your hot glue. The glue will dry quickly soon after application.

Hot glue fresh from the gun will be very hot. Be careful not to burn yourself.

2. Hot glue the tabs of your circles to the underside of the headband. Your circles should be at least 4” (10 cm) apart so that you have room for the bow that will go between the ears. You may want to mark your headband with your chalk where you'll be attaching the ears to prevent yourself from gluing them into the wrong place.

If your headband is flexible or will permit the use of staples, you could also use a hardy stapler to connect the tabs of your mouse ears to your headband.

3. Allow the glue to dry thoroughly. Playing with your mouse ears before the glue has completely dried could cause your mouse ears to come free of the headband. To ensure you don't have to re-glue any of your pieces together, you should allow your glue to firm for 30 minutes to an hour.

4. Style the ears into position. Your mouse ears might not stand straight up like Minnie Mouse's at first. To encourage your mouse ears to hold this position, fold both up and forward. The glued tabs will keep the ears in place.

Part 3 Creating the Bow.

1. Measure and cut a 10” (25 cm) length of ribbon or fabric. You can use either ribbon or fabric for your bow, although ribbon will likely be a little shinier and look more like the bow Minnie wears. In either case, it should be 5” to 8” (12.7 to 20.3 cm) wide. You will eventually gather this fabric around its middle, which will cause the sides to fan out. This will give your bow its shape.

Thicker cuts of fabric will create more bunching when you gather this piece around its middle, which will give your bow a fuller appearance.

2. Measure and cut a 3” (7.6 cm) gathering string. This is the piece you will use to gather the fabric around the middle of your 10" (25 cm) length of ribbon. You should use a similar kind of fabric to your 10" (25 cm) ribbon, but you could also add some pop to your design by using a contrasting color fabric.

For example, if you are using Minnie's traditional bow color, red with white polka-dots, you might choose a bold blue for your gathering string.

3. Lay the 10" (25 cm) piece of ribbon on a flat surface. Put the print side face down. You're going to want to glue your gathering string along the back of your bow, which will be the same as the opposite side of the pattern.

4. Fold the long ends your 10" (25 cm) ribbon toward its center. You'll want each side to overlap slightly at the center of your 10" (25 cm) length of ribbon. Fold one end at a time so that there is enough overlap to glue these side where the meet at the center of the ribbon.

5. Glue the folded inward ends at the overlap. It should only take a dab or two of hot glue or fabric glue to join the ends together firmly. Press the fabric firmly to create a stronger bond between the fabric and glue.

You should follow the directions on your glue to achieve the best bond. Some glues will set and cure faster than others. Generally, you should hold the glue firmly for one to five minutes for best results.

6. Arrange your ribbon into a bow shape. Use one hand to pinch your ribbon together toward its centermost point from the top and bottom edges. This will be easiest to do if you are working with a ribbon that is at least 5” (12.7 cm) wide.

Pinching your ribbon together tightly will cause the outside edges to flare out more dramatically.

7. Loosely wrap your gathering string around your bunched ribbon. The 3” (7.6 cm) piece of ribbon will hold the fabric of your bow in its flared position. Wind it around several times and then remove your fingers where you were pinching the bow in the middle.

Hold the ribbon with your free hand to make sure it doesn't come unwound or loose.

Wind the remaining length of your ribbon around the center tightly.

8. Glue the gathering string in place. Lift one end of the small piece of ribbon and apply a dab of hot glue or fabric glue. If using hot glue, you should be careful not to burn yourself by pressing on the fabric immediately after glue application.

To apply pressure to make the best seal between your hot glue and fabric, you might use a tool to prevent getting burned, like a paperweight, gloved hand, or tweezers.

Fabric glue and other cold glues should be held together firmly to encourage a strong bond. Press the glued piece of ribbon together. Hold this position for about 30 seconds to a minute.

Part 4 Attaching the Bow to the Headband.

1. Slip a pipe cleaner through a fold in your bow. The bunchings of your bow fabric should have created folds through which you can thread your pipe cleaner so that it passes under your glued gathering string.

If you find it difficult to feed your pipe cleaner through a fold and under your gathering string, you can always use glue to attach the pipe cleaner along the back of your bow.

A dab of hot glue onto the back of your gathering string should be enough to hold your pipe cleaner in place.

2. Cross one end of the piper cleaner over the other. Orient your pipe cleaner so it is equal length on both sides of your gathering string. Now cross the sides of your pipe cleaner at the midpoint over the front of your gathering string and add a twist.

This will prevent the pipe cleaner from slipping out of the bow while adding stability to the bow in general.

Experiment with different colored pipe cleaners to personalize your Minnie Mouse ears!

3. Secure your bow with the loose ends of the pipe cleaner. Center the bow between the ears. Then you're going to wrap each end of the pipe cleaner around opposite ends of your headband. Twine each side of the pipe cleaner down opposite ends of the headband until you go no further.

The ends of pipe cleaner can be pointy. To prevent the wearer from getting poked, you may want to turn these inward on your headband. The ends can also be taped to the headband as an extra precaution.

By attaching your bow to your mouse ears with a pipe cleaner, you'll be able to swap out different bows without having to make a new pair of mouse ears.

Twist ties can be used to reinforce your pipe cleaners if you find the pipe cleaner windings are not holding the bow in place well enough.

4. Add finishing touches and show off your mouse ears. Minnie, being a stylish mouse, would probably go ga-ga over some rhinestones, glitter, feathers, or other accents you might add to your mouse ears. Most of these can be attached with a small dab of hot glue. Once you've finished adding your finishing touches, you should show off your mouse ears to all your friends.

Tips.

Use a black felt tip marker to color white pipe cleaners if you don't want the white to show too much.

Warnings.

Hot glue emerges from the gun applicator at a very high temperature. Whenever using hot glue, you should follow the instructions that came with your glue gun and take care.

Things You’ll Need.

Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long), Black felt, Black felt tip marker, black crayon or paint (optional), Cardboard.

Chalk, Foam (optional), Headband, Hot glue gun, Household glue, Pipe cleaner, Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019

how to make a cork snake

How to Make a Cork Snake

A great way to use up corks and a lot of fun for the kids, this cork snake is suitable for kids to make and play with. It can be as fancy or as plain as the kids desire, and a few beads added at the tail end make for rattling fun.

Part 1 Preparing the corks.

1. Drill holes directly down the center of each cork. This is really the only part that the kids can't do, so you'll need to prepare this first.

2. Brush away any cork dust and broken pieces. Discard any corks that split during the drilling process.

3. Cut one cork in half. This will be the head piece (the slit becomes the snake's mouth).

4. Cover the workspace. Painting is a messy job, especially when the kids muck in! Use newspaper, a tarpaulin, etc. to cover the painting zone.

5. Paint all of the corks. Choose a suitable color for the snake––good colors include yellow, green, brown, black, red, etc. But your snake can be hot pink or neon orange if you want!

Allow to dry before assembling the cork snake.

6. Paint patterns. This step is optional but adds to the interest of the snake. Patterns can include stripes, zig zags, spots/dots, diamonds, triangles, etc.

Again, allow to fully dry before assembling.

Part 2 Assembling the cork snake.

1. Thread the length of elastic through one of the corks with holes in its middle.

2. Add a bead next.

3. Thread the next cork onto the elastic length. Again, add another bead.

4. Continue in this way until all corks are threaded in place.

5. Make the tail end. Thread 4 to 6 beads onto the tail end to make the snake's tail. Knot firmly in place.

6. Pull the elastic through the snake to draw together all of the corks and tail. Don't pull too tightly though; allow some give so that the snake can twist and turn. There should be a good amount of elastic left at the head end, which will both hold the head and form the snake's tongue.

Part 3 Adding the head of the cork snake.

1. Make the eyes. Thread two eye colored beads onto the pipe cleaner.

2. Place one half of the cut cork round side down under the extra piece of elastic at the head end of the snake. The cork should face the same way as all the other corks (that is, the long way, not sideways).

3. Lay the elastic flat down on this cork half. Let the overlapping part stick out over the end of the cork half to become the tongue. Wrap the pipe cleaner around the cork half in such a way as to have the beads sit at the sides, evenly. These are the snake's eyes. Cut off any excess pipe cleaner.

4. Glue the other cork half down on top of the cork half with the elastic on it. This completes the snake's head. Wrap a rubber band around the head to keep the cork halves together until the glue dries firmly.

5. Finish the tongue. Cut the elastic down to a length that is suitable for the snake's tongue.

Cut a V shape into the end of the elastic to mimic the forked tongue that snakes have.

Paint this end piece of elastic a good tongue color, such as red, pink or blue.

6. Done. The snake is now ready for play. If you want it to last longer, varnish the whole snake and allow this to dry before playing.

Things You'll Need.

10 bottle corks, all of the same size and shape (although, you can make the head a different cork if preferred); it's easier if the corks come pre-drilled but might be difficult to obtain; the wider the corks, the better for this project

1 cork for cutting in half, Drill and drill bit, Paint in color of choice, suitable for a cork; acrylic paints are best.

Paint for tongue as well, Paintbrushes and cleaning water (have enough for all children participating), Cover for work space.

60cm/24 inches of flat elastic (1-1.5cm/1/2 inch width), Scissors, Pipe cleaner/chenille stick, Large beads for tail; small beads for eyes,

Rubber bands (new), Craft glue, PVA glue varnish or other suitable varnish.

Desember 03, 2019

how to make fake snow

How to Make Fake Snow.

Artificial snow comes in handy for craft projects and when putting on a winter-themed event, such as a school play or the senior prom. Here are several methods for making fake snow that can top off art projects or enhance winter-themed events.

Method 1 Simple Fake Snow.

1. Tear up cotton. Take a cotton ball or cotton swab between your fingers and pull to stretch it out into wispy snow. Lay them out as a field of snow in craft projects, or reshape them into balls to make miniature snowmen.

2. Imitate falling snow with laundry soap flakes or instant potato flakes. Make a video of fluffy, falling snow by pouring this in front of the camera.

This also works as fallen snow. To make it more fancy, combine 4 cups (960mL) flakes, 1⅓ cup (320mL) liquid starch, several drops blue food coloring, and glitter.

3. Punch paper holes. Punch small holes from white paper and use the punched circles as snow. This works best when blown in front of a fan.

4. Add fake snow to snow globes. To refill a snow globe, pour in glycerine and small thermocol balls. You may use glitter or small beads instead of the thermocol.

5. Make a sparkly glaze for small craft projects. Mix ¼ cup (60mL) each of table salt and talcum powder. Spray the surface with spray-on craft glue or dab on white glue where you want the "snow" to stick. Sprinkle the sparkly mixture on the wet glue and allow to dry. Turn the project upside down to remove excess "snow."

6. Mix water with flour or baking soda. Start with white flour or baking soda. Add water one small spoonful at a time, mixing it up with a fork. Once you've formed a paste, cover the ground of a small winter scene. You can shape this into snowy hills and slopes with your hands. Sprinkle more flour over the top once finished.

Method 2 Realistic Fake Snow.

1. Combine sodium polyacrylate with water. Cut open a disposable diaper and remove the white granules; these are made from sodium polyacrylate. You can also buy it in powder or granulated form from the soil treatment section of a garden supply store. Powder makes fluffy "snow," while the granules create slushy "snow." Mix in water little by little until you obtain the desired consistency.

This may look more realistic if you put it in the freezer.

If it dries out, just add more water. If you want to keep it dry, reduce the amount of water and add salt.

2. Blend crushed ice and white paint. This melts quickly, so it will only work in a cold room. Pour the crushed ice in a big bowl, then stir in white paint. Add water slowly until the snow reaches the desired consistency.

3. Make salt crystals. With a cup of water and a string, you can grow your own salt crystals. The longer you hang the string in the water, the larger the crystals will be. Arrange these to form clumps of sparkly snow.

4. Paint the surface. You can use paint to make a surface look like it's been covered with snow. Dip an old brush into any type of white paint. Keep your thumb on the bristles, facing toward the surface. Rub the bristles gently to spray the paint onto the surface.

Don't use a nice new brush, since rubbing the bristles will damage them.

Tips.

To make a full winter scene, cover the base of a cardboard box with a flour and water "snow." Shape the snow into hills and valleys. Press a small mirror onto one of the valleys to make a pond, covering the edges with snow. Plant several twigs as trees, put the lid back on, and poke a viewing hole through the side of the box.

Continue tearing up cotton balls and gluing them down to make it look like fake snow and add a 3D effect.

November 29, 2019

how to organize a craft room

How to Organize a Craft Room.

A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.

Method 1 Sorting Your Craft Supplies.

1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’

Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.

2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.

At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.

To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.

3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.

Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.

Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.

4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.

Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.

5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.

Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.

Method 2 Implementing a Storage System.

1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.

Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.

2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.

Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.

Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.

Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.

3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.

4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.

Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.

For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.

Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.

5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”

You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.

6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.

Method 3 Organizing Your Space for Creative Inspiration.

1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.

In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.

2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.

3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.

4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.

To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.

5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.

6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.

Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.

Tips.

You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.

Warnings.

Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.

November 25, 2019

how to get ideas for crafts and projects

How to Get Ideas for Crafts and Projects.

Crafters, makers and builders create beautiful items out of raw materials. If you are a crafter that is unable to think of your next project, there are many ways that you can get new ideas. Crafting is one of the most popular subjects of blogs, magazines, classes and more, and its popularity has only risen as the Internet has become an easy way to share methods, techniques and projects. Depending upon how you like to learn, you can choose the most comfortable option. Select your specific area of crafting and search for the newest crafting projects using these avenues. Read more to find out how to get ideas for crafts and projects.

Steps.

1. Join a quilting bee, knitting circle or scrap booking club. Monthly meetings give the opportunities for exchanging ideas, showing off projects and doing group projects.

This is also a great way to meet people with similar interests and form lasting friendships. Crafting often allows you to talk to other people and learn their stories. Many rural communities have quilt guilds, knitting bees and craft circles that stay intact for decades.

2. Take night classes. Most cities have a group that is devoted to community education and gives a catalog of classes at a small fee. These can include anything from jewelry making to scrap booking to wood working.

Search online for "Lifelong learning classes" in your town or "Community education." Most classes happen once or twice a week over a period of months and they teach you new skills and give you many ideas for projects.

3. Get a subscription to a do-it-yourself magazine. Depending upon your preferences, there are many options. Magazine subscriptions can be bought from a website, Amazon, or a magazine prescription service, and it is a good idea to look for the best offer.

Good options for crafters include Martha Stewart Living, Card Maker, This Old House, American Style, Creative Knitting, Do-It-Yourself, Ready Made, American Craft, Crafts and Hobbies, Quilter, Paper Crafts, Creative Woodwork and Crafts, Car Craft. Knit'N Style, Sew News and Creating Keepsakes.

You may want to go to a supermarket and buy a few issues of each of these magazines to decide which one would be the best monthly subscription.

4. Get involved with Blogger, WordPress and other blogging platforms. Once you have a profile you can subscribe to craft blogs and check back whenever you need a fresh idea.

You may hear of craft bloggers referred to as "choggers." Start by checking out popular blogs, such as Bakerella, Cuteable, Dollar Store Crafts, Not Martha and the Pearl Bee. There are thousands of blogs to choose from, and they may also provide an email newsletter.

5. Sign up for email newsletters from magazines like Real Simple, Better Homes and Gardens and Ready Made. They will send you weekly or monthly issues depending upon your preferences, filled with new ideas from their crafters-in-residence.

6. Inquire at local stores if they do classes. In order to drum up business, stores often provide classes for a small fee as long as you buy the materials. For instance, a knitting business may teach their patrons how to use a new set of knitting needles in order to sell more sets.

7. Go online and simply search for patterns or templates. If you are looking for children's crafts, this is the fastest and least expensive option. If you cannot afford patterns for quilting and knitting, there are a number of free online templates that you can find using an Internet search and a printer.


Things You'll Need.

Community craft circles.

Craft magazines.

Craft blogs.

Email newsletters.

Printer.

November 25, 2019