how to make furry cat ears

How to Make Furry Cat Ears.

Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.

Februari 12, 2020

how to make a bird nest

How to Make a Bird Nest.

A bird's nest makes a wonderful mantelpiece decoration, and can make use of almost anything you find along a nature hike, or in your front yard. Wild birds usually prefer to make their own nests, but you can lure many species to your yard by leaving the right materials outside, or building a nesting box.

Method 1 Building a Decorative Nest.

1. Find long, flexible plant stems. These will form the main shape of the nest, and are much easier to work with than hard, short twigs. You can use straw, long grass, vines, willow fronds, bendy reeds, or seagrass found outdoors or at a garden supply store. Raffia is another good option, obtainable from a craft supply store.

If Mexican feather grass grows in your area, grab a clump of it and pull your hand upward to remove a handful of hairy seeds clinging together. Once you have enough seeds, clump them into a ball and make a nest shape by sticking your thumb into it.

2. Bend the stems into a loop. Grab a thick handful of the stems, and bend them into a U shape, adding more stems if necessary to form a full circle. Tie it in place using a piece of string or florist wire. If the plant stems have many little leaves, or if they're wiry and dry, you can even weave them together without using any attachment.

If tying the nest together is too hard, you can clip them temporarily in place while waiting for glue to dry. Don't use glue if you plan to keep the nest outdoors.

If your fresh-cut plants won't stay in position, try hanging up the bundle in a windy area to dry for 24 hours. Some plant stems are easier to bend when fresh, but grasses and straw benefit from drying.

3. Shape the rest of the nest. Grab a second, smaller handful of stems and shape it into a smaller loop. Wedge this inside the larger loop and push it downward to form the base of the loop. Depending on how well the stems fit together and how sturdy you want the nest to be, you may need to use a thread  or glue to fasten the two loops together.

4. Decorate with scavenged materials. Real birds sometimes spend days collecting bits and pieces to build a nest. Hopefully you're a little faster, but you can still have fun gathering objects from nature or your craft boxes. Here are some ideas to get you started:

If you plan to leave the nest outside, only use materials found outdoors, and nothing that could hurt an animal.

Feathers and pieces of eggshell fit the theme. Be aware that collecting most wild feathers is illegal in the United States, but they are mostly harmless from a disease perspective.

Look for twigs, leaves, bark, and moss in interesting shapes and colors.

If the nest is for indoor decoration, you can use bits of string, colored paper shreds, and confetti.

5. Place eggs inside (optional). Finish your art project by placing eggs or fake eggs inside the nest. You can quickly add marbles or colorful pebbles, or hollow out real eggs, decorate them, or even carve them if you have the right tools.

Things You'll Need.

Any long, flexible bundle of stems, grass, or straw, String, florist's wire, or glue (recommended unless stems interweave easily).

Moss, bark, twigs, or other decorative materials, Eggs and egg-blowing materials (optional), Marbles, pebbles, or other "fake eggs" (optional).

Method 2 Attracting Wild Birds to Nearby Nests.

1. Look up the nesting habits of local birds. Find a local wildlife guide at a library or bookstore, or search online for information on local birds. Choose one or more species you want to attract, and look up their nesting habits to discover what shape and style of nest will be most effective.

If you live in North America, NestWatch is an excellent resource for nesting information, and one you can expand with your own data.

2. Leave nesting material in your yard. This is an easy way to attract birds, and might be worth it even if you end up building a full nest as well. If you managed to find specific nesting information, you'll know what materials to leave, but you can't go wrong with a few items from the following list, left in visible locations:

Rigid twigs (for platform nest species) and flexible ones (for cup nest species).

Yard clippings such as dry grass and straw, bits of bark and moss, dead leaves, etc.

Human or animal hair or fur (no longer than 6 inches / 15 centimeters).

Yarn or string.

Mud, spiderwebs, and/or caterpillar cocoons to help birds bind nesting materials together.

Never leave out materials that have come into contact with harsh chemicals, including dye, pesticides, or anti-flea treatments. Dryer lint and clothing rags are not recommended.

3. Provide a variety of plants. If you want to attract birds that make nests in existing holes, leave dead tree stumps and fallen logs in the yard. Living trees and bushes will attract more visible nests from other species, especially if the plants are native to your area. For best results, plant a "staircase" of grass or moss, flowering perennials, shrubs, and trees.

4. Build a nesting box. If there aren't obvious crevices or hollows in your yard, building a nesting box or birdhouse is a simple carpentry project. Make sure the birdhouse is constructed to match the size of the birds you want to attract, or the size of the birds you see flying near your home.

For a higher chance of success, follow birdhouse building instructions specific to common North American species.

Clean out the birdhouse regularly whenever birds are not nesting.

5. Make a bird's nest. Many birds prefer to make their own nest rather than move in to a ready-made one. Lining natural hollows with the nesting materials listed above may give a bird an attractive head start. If you want to make a different type of nest, such as a cup or platform nest, it's best to follow the specific habits of the bird species you want to attract. Each species tends to prefer certain materials.

Placement of the nest is also important. Many bird species hide their nest amidst thick branches, but some prefer more open branches, bushes, or open patches of ground. Look for more information on NestWatch, through online searches, or in a local bird nest identification guide.

Things You'll Need.

Any yard clippings, especially twigs and grasses, String or yarn, Mud, spiderwebs, or caterpillar cocoons.

Human hair or animal fur, Small amount of lumber and nails (to build a nesting box, if hollow logs not available).

Question : Where do you get all the supplies?
Answer : You can find the necessary items on the ground in a park or wooded area, perhaps even your back yard!

Question : How do I make the nest big?
Answer : You can use longer sticks that are pliable enough to bend. Just make sure not to break them.

Question : What if I live in the city?
Answer : If you live in the city and want to attract birds, put up bird feeders. Birds love cracked corn, nyjer seeds, black oil seeds, fruits, and millet. Just make sure to take measures to keep the squirrels out.

Question : Am I allowed to take care of a wild baby bird if its mother is away and it's storming outside?
Answer : No. Leave the baby bird alone. Its mother will come back for it. Wild animals can take care of each other and themselves, they very rarely need our help. The bird will be fine in the storm.

Question : How do I make a bottled nest box?
Answer : Just take a milk bottle (not glass) and make an opening in the body of the box. Then take a rope and make holes at the top and tie the rope to the holes. Make sure you make it tight.

Question : Can I hatch the eggs myself?
Answer : If it is a wild bird egg do not touch it. In the USA it is illegal to take care of wild birds.

Question : Can I look at the eggs when they have been laid?
Answer : You can take a peek, as long as the mother bird is not nearby. Make sure you don't touch the eggs, as you will leave a scent behind that the mother bird can detect.

Question : Are most bird nests made of straw, twigs, and mud?
Answer : Yes, that is what a typical bird nest is made of.

Question : What can I do about wild animals that eat the eggs?
Answer : It depends on the animal. For squirrels, you can't really do anything, but for other birds you can find a better spot to put the nesting box. You shouldn't worry too much, because the mother bird will protect it's young with her life.

Question : Can I make a bird nest from leftover grass from a lawn mower?
Answer : Lawn clippings are probably too short to make a decent nest. Maybe if you collect it and dry it out you can use a few pieces to line the nest.

Tips.

For a quick and easy nest, shred or cut a paper bag into thin strips. Line a bowl with a paper towel, arrange the strips over them, then glue the paper bag strips together and let dry into a nest shape.

It’s fine to take a look at the eggs, but be careful, because smart animals like coyotes can follow you to the nest. If you have no predators in the area, taking a look at the eggs will leave a scent, but birds don’t have a sense of smell.

Warnings.

If a wild bird moves in to your nest, don't disturb it or the surrounding area. Watch the nest from somewhere the bird can't see you, or you may scare the bird away or attract predators to the nest.

Januari 20, 2020

how to make a dog out of mardi gras beads

How to Make a Dog out of Mardi Gras Beads.

After a good celebration, you might find yourself with a whole bunch of leftover plastic bead necklaces. This simple craft is a cute and easy way to make use of these beads. They are made just like balloon animals, by twisting the necklace into the right shape.

Method 1 Bead dog.

1. Find the two beads melted together to form the join on the bead necklace. Give this a tug to break it. Then snip off the two "bad" beads with the melted sides.

2. Cut a string of beads twelve beads long and another two beads long. These pieces will form the body and the ears.

3. Twist four beads together behind the second bead on the long string. This will make a little square. One bead should be sticking up. This is the tail of the dog.

4. Do the same thing to the other side of the long piece except that after you twist the beads, 2 beads should be sticking out for the head. You should have one bead in between the the two sets of little squares.

5. Wrap the two beads behind the first bead on end with the two beads sticking out. This will make the ears and completes the dog.

6. Finished.

Method 2 Mardi Gras bead poodle.

1. Cut four segments from the plastic bead necklace. Cut one segment with 4 beads and three segments with 2 beads.

2. Lay out the 4-bead segment. Pick up one of the smaller segments.

3. At the space between the tip of the 4-bead segment and the second bead in that same segment, pull the small segment up so that the small segment crosses in between the beads on both segments.

4. Tighten the ears. Do this by twisting them around once.

5. Repeat with the other 2-bead segments. Except, this time, pull the small segments down instead of up, so that the ears stick up. The the legs point will also down, so the dog can stand.

6. Completed. This now makes a fine poodle.

Question : Method 2 looks too cartoonish, so I cannot see the character of the poodle. Please help.

Answer : Because of the size of the beads, the final project is the equivalent of a stick figure drawing in method 2. Method 1 is a basic "dog." To make a larger animal, it requires the beads to be supported by a wire frame to give it a realistic shape. Floral wire holds well for this purpose. Use a stick figure design with the wire, then wrap the beads around the wire. Since it is larger, try using the necklace as is for a double strand of beads.

Tips.

There are lots of things that you can do with these dogs such as adding then to a key ring, using in crafts, gluing onto hair accessories or giving them away as party treats.

Warnings.

All beads can be a choking hazard. Make sure to keep them away from small children and pets.

Things You'll Need.

A plastic Mardi Gras bead necklace

Scissors

Januari 17, 2020

how to make a balloon pet

How to Make a Balloon Pet.

A balloon pet can be made in various ways, each making use of the balloon shape and then being decorated as you please. In each case, these little "companions" aren't meant to last long; they're just a fun toy or decoration for a short time.

Method 1 Blown up balloon pets.

1. Make a balloon pet using a blown-up balloon. There are lots of possibilities here, so this section will provide a few suggestions and you can experiment with your own as well.

2. Make a balloon dog. Choose a balloon in the color you'd like the dog to be, such as brown, white, black, grey or any other color.

Blow up the balloon with helium gas. Tie it into a knot, to keep the gas in place.

Draw floppy ear shapes onto two pieces of card. Color in (if needed), then cut these out. Attach using glue to each side of the balloon, at the non-knotted end.

Draw the face directly onto the balloon. Draw a kidney shape facing downward for the snout and draw a circle in the middle for the dog's nose. Draw large eyes above the snout and blacken them in.

Tie a string on the base. The dog balloon can now be played with or used as a party decoration.

3. Make a balloon fish. Choose an orange or yellow balloon for making the fish.

Blow up the balloon. You can use air or helium gas, whichever is easiest. Tie a knot in it, to keep the air in place.

Draw two fin shapes on orange or yellow card. Cut these out. Attach them with glue to the sides of the balloon, with the back of the fins facing toward the knotted end of the balloon.

Cut out a tail fin from the orange or yellow card. Glue over the knotted area of the balloon.

Stick on two large eyes made from card. Or, simply draw these on with markers.

The fish balloon is now ready for play or to be placed out as a decoration for a party.

4. Make a balloon puppy. This is a fun one for the kids to drag around with them, and is easier if you only have air rather than helium for filling the balloons.

Blow up the balloon. Tie a knot in it, to keep the air in place. (Air is best as it allows the balloon puppy to hover around the kid's feet as it is being walked.)

At the knot end of the balloon, create the dog's face. Draw a round nose just above the knot and blacken it in. Draw a smiling mouth (two semi circle arcs either side of the knot). Draw whisker dots above each smile arc (about four is sufficient).

Either attach floppy ears made from card, or draw them on the dog. They look more effective if made from card though.

Cut out a length of string or cord. Tie onto the balloon knot. This becomes the puppy's leash.

Allow the kids to take the balloon puppy for a walk.

Method 2 Water balloon pet.

1. Fill a water balloon with water.

2. Tie off the balloon to keep the water intact.

3. Decorate the balloon.

Draw a face on it. Use markers. If you want to stick on googly eyes, do so.

Stick on hair if wished. You can use strands of yarn stuck on with craft glue. If you would like a bow in the hair, cut one from paper and glue on.

Draw on any clothing or accessory features, if relevant. For example, a tie, or necklace.

4. Finished. The water balloon pet can be played with for a while.

Method 3 Balloon stress relief pet.

1. Make a stress relief pet that will last a little longer than the other projects suggested in this article. This "pet" can be held in the palm of the hands and squeezed to reduce tension and exercise the hand muscles.

2. Choose a balloon color. Any color is fine, these "pets" can be all colors of the rainbow.

3. Stretch the open end of the balloon a bit. Stretch it back and forth to make the opening a little looser. This will help placing the filling inside.

4. Funnel in the filling for the balloon. This can be either sand or play dough, depending on your preference. Kids tend to like the play dough because it can be shaped into all sorts of funny configurations that keep their shape after molding.

5. Knot the balloon. Ensure that the sand or play dough do not come into the neck area of the balloon; if you have overfilled it, remove some of the filling, to allow you to tie a knot in the balloon.

6. Decorate the balloon pet. Draw eyes, a smile, a nose, freckles, etc. It's fun to let the kids do this for themselves, as they can style the face in their own way.

7. Add hair. This step is optional but can make the pet look funnier. Add small spikes of yarn to the knot end of the balloon; glue to attach. Keep these pieces short, so that they stand up.

8. Done. The balloon pet is now ready for play or stress relief.

Method 4 Balloon animal from balloon art.

1. Make a balloon pet using balloon art twisting techniques. There are many different animal shapes that you can make using this technique, allowing you to have a whole menagerie of balloon pets if wished.

Question : Mine is ugly. How do I make it pretty?
Answer : Experimenting with different faces and designs can help you to make this craft your own. If you're not happy with how it looks the first time, try making it again in a different color or with a different face. Remember, practice makes perfect!

Tips.

Dispose of used balloons thoughtfully. They should be encased inside your normal trash, so that animals cannot find the balloon remains and eat them. Balloons inside animals can kill if they get wrapped around internal organs or cause blockages.

Things You'll Need : Balloons, Markers, Decorative elements, Scissors and glue, Card, String or cord, Sand or play dough as filling.

Januari 15, 2020

how to make waxed dipped bears

How to Make Waxed Dipped Bears.

Small teddy bears dipped in scented candle wax are popular craft items. Make wax-dipped bears for yourself or as gifts for adults. They may also sell well at craft and hobby shows.

Steps.

1. Place 1 pound of wax in a slow cooker. Set the temperature of the cooker on low to medium. Use a cooking thermometer to measure the temperature until it reaches about 180 degrees Fahrenheit (82 C). One pound of wax will typically cover 2 small bears or 1 medium-sized bear.

Add glitter to the wax before dipping the bear if you want it to sparkle.

2. Add a few drops of liquid candle scent to the melted wax. Stir the wax with tongs. Add more scent if you prefer a strongly scented bear. Rather than add scent, you can also use pre-scented soy wax if you prefer.

3. Put on a pair of rubber gloves. Handle tongs, the cooker and the bear with gloved hands.

4. Use tongs to dip a bear into the wax. Turn the bear until it is completely covered with wax.

5. Lift the bear from the wax with tongs. Hold it over the slow cooker to allow excess wax to drip off.

6. Hold the bear with the tongs until the wax is cool enough to not burn your hands through the gloves. Squeeze the excess wax from the bear, letting it drip into the cooker.

7. Use a wire bristle comb to fluff the fur on the bear. Pull the fur outward with the comb so it looks natural instead of matted down in the wax. Work quickly so the wax doesn't set before the bear is completely fluffed.

8. Set the bear on a cookie sheet until the wax cools and sets.

9. Add embellishments like a ribbon bow around the neck or ears.

10. Tie a printed tag to the wax-coated bear. Include a greeting or tips on how to care for the wax-coated bear.

11. Wrap the bear in cellophane to preserve the scent if you are giving it as a gift or selling it at a craft show. Store finished bears separately in plastic bags to keep them from sticking together.

12. Finished.

Tips.

Blow a heated hair dryer over the bear to restore its scent when it fades.

Use jointed bears if you wish to pose the bear's arms and legs.

Warnings.

Set wax-dipped bears on a saucer or coaster. The wax will damage wood and some types of counter-top surfaces.

Do not treat a waxed bear like a candle. Never add a wick or attempt to burn the bear. Keep waxed bears away from heat sources and lit candles.

Things You'll Need.

Slow cooker, Candle wax, Cooking thermometer, Liquid candle scent.

Plush stuffed teddy bear, 10 to 12 inches (25.4 to 30.5 cm) tall.

Tongs, Rubber gloves, Cookie sheet pan, Wire bristle comb.

Ribbons, Printed tag, Cellophane bags.

Desember 02, 2019