20 common embroidery mistakes

20 common embroidery mistakes

Every hobby has its learning curve, and embroidery is no exception. Avoiding mistakes can save you time, money and frustration.



Reviewing these top 20 common—and avoidable—embroidery mistakes, and you'll know what to avoid before starting your next embroidery project.



Not Reading the Instructions

Always read the instructions. Using the wrong thread or number of strands of embroidery floss is one of the most common errors that happens when you skip reading the instructions. With kits, this can lead to running out of thread before completing the project. It also may result in a different line thickness than intended.



Choosing the Wrong Embroidery Fabric

Most forms of surface embroidery require a firm fabric foundation, often with a thread count of 28 or higher. Using an embroidery fabric with a lower thread count can result in poorly-formed stitches, although you can add stabilizer to create a better surface. Counted Thread or Pulled Thread projects require a lower, looser thread count. This makes it easier to pull and remove threads and create lacy stitches.



Selecting the Wrong Size of Needle

Using an embroidery needle that is too large for the project can result in holes in the fabric where the needle and thread enter or exit.



Using a Sharp Needle Instead of a Ball-Point Needle

Use sharp needles when the needle and thread need to pierce the fabric, as in surface embroidery and crewel.



Starting and Ending a Thread With Knots

Although not the worst mistake ever, it's best to avoid knots in any type of embroidery project. Instead, start a new thread with ​a waste knot, away knot, or by weaving it into the back of previously worked stitches.



Selecting an Embroidery Thread of the Wrong Thickness

Generally, bold lines of embroidery require thicker embroidery threads and narrow lines require finer threads. Combine threads to make a thicker strand and separate floss into single strands or groups of strands for working thinner lines.



Using Craft Thread Rather Than Embroidery Thread

Inexpensive thread sold in packages as a “Craft Thread” (often 6-strand floss or #5 pearl cotton) are for craft projects such as friendship bracelets, macramé, or children’s crafts and not for embroidery.



Marking Your Fabric With a Regular Pen

It's best to use a water-soluble fabric marking pen, chalk pencil or fabric pencil to mark your embroidery design on your fabric.



Using Heat Transfer Pencils Instead of Water-Soluble Fabric Pencils

Transfer pencils and pens are great for making iron-on designs, but they are permanent.



Iron Transfers Are Fuzzy or Distorted

When using iron transfers (either that you purchased or made with a heat transfer pen), fuzzy markings result when you slide the iron back and forth on the pattern paper. Instead, press the iron on the back of the pattern paper just long enough to transfer the markings.



Not Using an Embroidery Hoop or Frame

Using an embroidery hoop, scroll frame, or stretcher bars keeps the fabric taut and makes it easier to work accurate, well-formed stitches.



Rolling Fabric on a Scroll Frame in the Wrong Direction

Roll fabric on the bars of a scroll frame with the wrong sides of the fabric rolled to the outside (facing you).



Not Removing the Hoop Before Storing

Always remove your embroidery hoop before putting away your embroidery for the day, and especially before storing it for any length of time.



Not Enough Floss or Embroidery Thread When Starting

Before you start stitching, make sure you have all the necessary embroidery threads on-hand.



Getting Your Project Dirty

Always wash your hands before working on your embroidery project and avoid snacking while you stitch.



Improper Cleaning or Laundering for the Thread or Fabric Type​​

If an item requires laundering, check the fiber content of the fabric and thread before washing.



Ironing a Finished Embroidery Piece and Smashing the Stitching

You work hard to create beautiful works of art with delicate and dimensional stitching.



Storing Needlework Fabrics and Finished Pieces Incorrectly

Needlework is an investment of both time and materials. Properly caring for and storing your pieces helps avoid staining and fiber breakage, ensuring you get a lifetime of use from your items.



Displaying Needlework in Direct Sunlight​​

Many fabrics and threads used in embroidery like to promise that they are fade-resistant.



Rushing to Fix a Mistake

If you make a mistake and find yourself picking out stitching, do this carefully and slowly.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019

how to make bottle penguins

How to Make Bottle Penguins.

There are lots of ways to recycle plastic soda bottles, and turning them into adorable penguins is one of them. With a little bit of paint, time, and creativity, you can turn 2 plastic soda bottles into an adorable penguin. If you have a lot of plastic soda bottles then you can create an entire penguin family!

Part 1 Assembling the Base.

1. Find 2 plastic soda bottles. The large, 2-liter (67.2-oz) bottles will work the best for this, but you can use smaller soda bottles too. Look for the kind that have the 4 bumps on the bottom. These bumps will make the feet and the hat.

The color of the bottles does not matter. You will be painting it.

2. Remove the labels and wash the bottles. Peel the labels off first, then wash the bottles inside-out with soap and warm water. Be sure to remove all sticker residue. Dry the bottles with a towel.

Wipe the bottles down with rubbing alcohol as well. This will remove any oils that might keep the paint from sticking. Let the bottles dry; this should only take a few seconds.

3. Cut the bottles in half and recycle the top sections. A craft blade will work the best for this, but you can do it with a sharp pair of scissors too. Young children should be supervised during this step.

If the cut edge is jagged, cut it smoother with a pair of scissors.

For a smaller penguin, cut the bottom 2 to 3 inches (5.1 to 7.6 cm) off of the first bottle, and cut the second bottle in half. The shorter half will make the bottom.

4. Tuck 1 bottle inside the other to make a capsule. Turn the bottles so that the cut edges are facing one another. Slide the first bottle into the second bottle by about 1⁄2 to 1 inch (1.3 to 2.5 cm). If the bottles won't fit inside one another, cut a 1⁄2 to 1 in (1.3 to 2.5 cm) slit into 1 of the bottles first; place this edge on the inside.

Make sure that the 4 bumps on the top and bottom of the capsule line up.

5. Glue the bottles together, if desired. If the bottles are loose, glue them together with tacky glue or super glue. Pull the bottles apart, and paint the inside rim of 1 bottle with glue. Slide it over the other bottle.

Hot glue is not recommended because it is too bulky.

Alternatively, you can keep the bottles loose, and use the penguin as a gift box.

Part 2 Painting the Penguin.

1. Paint the entire capsule black, then let it dry. Take the capsule outside or into a well-ventilated area. Set it down on a sheet of newspaper, then coat it with black spray paint. Let the paint dry for 15 to 20 minutes, then turn the capsule over. Spray paint the bottom and let it dry completely.

Hold the can 8 to 10 inches (20 to 25 cm) from the capsule, and spray using a side-to-side motion.

If the paint is too thin, let it dry completely, then apply another coat of paint.

If you don't have spray paint, paint the capsule using black acrylic craft paint and a paintbrush.

2. Paint the penguin's face and belly white, then allow them to dry. Use a pointed paintbrush and white acrylic craft paint to outline the white face and belly of the penguin. Fill your outline in using a flat paintbrush. Let the paint dry, then add another layer if the first layer is too thin. Let the second layer dry too, if you added it.

Look at pictures of real or cartoon penguins to get ideas for the placement of the white parts.

Make sure that 2 of the bumps on the base of the capsule line up with the bottom of the penguin's belly. These are its feet!

If you are making a smaller penguin, use the shorter half to make the bottom.

3. Give the penguin a widow's peak, if desired. Use a pointed brush and black acrylic craft paint to draw a V-shape at the top of the penguin's white face. Fill the V-shape in with black paint so that it blends in with the body. For an even nicer finish, made the sides of the V-shape curved so that it looks like Mickey Mouse's widow's peak. Let the paint dry before moving on.

4. Paint 2 eyes and a beak using acrylic craft paint. Use a yellow upside-down triangle for the beak, and 2 black dots for the eyes. For a more realistic beak, paint a yellow or orange circle, then draw a horizontal black line going through the middle.

Look at pictures of cartoon penguins to get ideas.

You can also hot glue 2 buttons or 2 googly eyes for the eyes.

If you don't have yellow paint, cut a triangle out of yellow paper, and glue that on instead.

Part 3 Adding Optional Details.

1. Give your penguin character with lashes, eyebrows, and/or blush. You don't have to do any of these, but they can really give your penguin personality. Use a very thin brush for the lashes and/or eyebrows, or a paint pen. Use a larger pointed brush to apply pink paint for the blush.

If you want to give your penguin visible yellow feet, paint the 2 bumps in the front (under the white bellow) with yellow acrylic craft paint.

2. Paint the top half of the bottle to turn it into a hat. The 4 bumps on top of your penguin's head can easily turn into a hat. Paint a line around the penguin's head, just above the eyes, then fill in everything above that line. Use whatever color you want.

If you have a molded line just below the bumps, you can use that as a guide instead.

3. Let the hat dry, then add some details. You can make the hat look more hat-like by painting or drawing some stripes or spots onto it. Use a thin, pointed paintbrush and acrylic craft paint in a contrasting color to do this. Let the paint dry when you are done.

Use a paint pen for thin stripes or small dots.

4. Glue a pompom to the top of the hat, if desired. You can make the pompom yourself out of yarn, or you can buy it from the kids section of a craft store. Hot glue the pompom to the top of the hat, right between all 4 bumps.

Choose a pompom color that matches the designs on your hat. If you did not add designs, then use a contrasting color instead.

5. Tie ribbon around the neck to make a scarf. Find some ribbon that goes well with the hat. Wrap the ribbon around the penguin's neck, then cross the left end over the right end. Bring the left end up through the gap, then tighten it. This is just like starting to tie a pair of shoes!

Glue both ends of the ribbon to the penguin so that they stay down.

If you are turning this into a gift box, make sure that you keep the ribbon below the seam.

You can also cut a long, skinny strip out of felt, and use that instead of ribbon. Cut fringes into each end for additional charm.

Question : How do we make the eyes?
Answer : Cut out two small black circles, and two slightly larger yellow circles. Glue the black circles onto the yellow circles, and glue those onto the white face.

Question : We don't have to remove the bottle cap?
Answer : If you have removed the cap, you will have to tape or otherwise plug the hole on the top to "sculpt" the rounded top of the head on, so it is not recommended to remove the cap. However, taping or a cork replacement can be used.

Question : Can I use a plastic bottle?
Answer : Yes, but it may be hard to paint.

Tips.

If you want your penguin to have a pointy hat, discard 1 of the bottom halves and keep 1 of the top halves. Use the top half as the hat.

Use paintbrushes made from sable or taklon bristles. Do not use boar bristle, horsehair, or camelhair.

Spray the penguin with varnish or sealer, if desired. Do this after you finish painting, but before you add pompoms and scarves.

You can spray the capsule with paint primer first to help the paint stick better.

If you are worried about the paint chipping, spray the capsule with paint primer before you start painting.

Warnings.

Use low-temp hot glue guns to avoid blisters and burns. Do not use high-temp hot glue guns.

Things You'll Need.

2 plastic soda bottles, Craft blade, Black spray paint, Acrylic craft paint (white, yellow, and black).

Acrylic craft paint, 2 contrasting colors, Flat and pointed paintbrushes, Ribbon or felt, Pompom, Hot glue, Tacky glue or super glue.

Januari 23, 2020

how to make a bird nest

How to Make a Bird Nest.

A bird's nest makes a wonderful mantelpiece decoration, and can make use of almost anything you find along a nature hike, or in your front yard. Wild birds usually prefer to make their own nests, but you can lure many species to your yard by leaving the right materials outside, or building a nesting box.

Method 1 Building a Decorative Nest.

1. Find long, flexible plant stems. These will form the main shape of the nest, and are much easier to work with than hard, short twigs. You can use straw, long grass, vines, willow fronds, bendy reeds, or seagrass found outdoors or at a garden supply store. Raffia is another good option, obtainable from a craft supply store.

If Mexican feather grass grows in your area, grab a clump of it and pull your hand upward to remove a handful of hairy seeds clinging together. Once you have enough seeds, clump them into a ball and make a nest shape by sticking your thumb into it.

2. Bend the stems into a loop. Grab a thick handful of the stems, and bend them into a U shape, adding more stems if necessary to form a full circle. Tie it in place using a piece of string or florist wire. If the plant stems have many little leaves, or if they're wiry and dry, you can even weave them together without using any attachment.

If tying the nest together is too hard, you can clip them temporarily in place while waiting for glue to dry. Don't use glue if you plan to keep the nest outdoors.

If your fresh-cut plants won't stay in position, try hanging up the bundle in a windy area to dry for 24 hours. Some plant stems are easier to bend when fresh, but grasses and straw benefit from drying.

3. Shape the rest of the nest. Grab a second, smaller handful of stems and shape it into a smaller loop. Wedge this inside the larger loop and push it downward to form the base of the loop. Depending on how well the stems fit together and how sturdy you want the nest to be, you may need to use a thread  or glue to fasten the two loops together.

4. Decorate with scavenged materials. Real birds sometimes spend days collecting bits and pieces to build a nest. Hopefully you're a little faster, but you can still have fun gathering objects from nature or your craft boxes. Here are some ideas to get you started:

If you plan to leave the nest outside, only use materials found outdoors, and nothing that could hurt an animal.

Feathers and pieces of eggshell fit the theme. Be aware that collecting most wild feathers is illegal in the United States, but they are mostly harmless from a disease perspective.

Look for twigs, leaves, bark, and moss in interesting shapes and colors.

If the nest is for indoor decoration, you can use bits of string, colored paper shreds, and confetti.

5. Place eggs inside (optional). Finish your art project by placing eggs or fake eggs inside the nest. You can quickly add marbles or colorful pebbles, or hollow out real eggs, decorate them, or even carve them if you have the right tools.

Things You'll Need.

Any long, flexible bundle of stems, grass, or straw, String, florist's wire, or glue (recommended unless stems interweave easily).

Moss, bark, twigs, or other decorative materials, Eggs and egg-blowing materials (optional), Marbles, pebbles, or other "fake eggs" (optional).

Method 2 Attracting Wild Birds to Nearby Nests.

1. Look up the nesting habits of local birds. Find a local wildlife guide at a library or bookstore, or search online for information on local birds. Choose one or more species you want to attract, and look up their nesting habits to discover what shape and style of nest will be most effective.

If you live in North America, NestWatch is an excellent resource for nesting information, and one you can expand with your own data.

2. Leave nesting material in your yard. This is an easy way to attract birds, and might be worth it even if you end up building a full nest as well. If you managed to find specific nesting information, you'll know what materials to leave, but you can't go wrong with a few items from the following list, left in visible locations:

Rigid twigs (for platform nest species) and flexible ones (for cup nest species).

Yard clippings such as dry grass and straw, bits of bark and moss, dead leaves, etc.

Human or animal hair or fur (no longer than 6 inches / 15 centimeters).

Yarn or string.

Mud, spiderwebs, and/or caterpillar cocoons to help birds bind nesting materials together.

Never leave out materials that have come into contact with harsh chemicals, including dye, pesticides, or anti-flea treatments. Dryer lint and clothing rags are not recommended.

3. Provide a variety of plants. If you want to attract birds that make nests in existing holes, leave dead tree stumps and fallen logs in the yard. Living trees and bushes will attract more visible nests from other species, especially if the plants are native to your area. For best results, plant a "staircase" of grass or moss, flowering perennials, shrubs, and trees.

4. Build a nesting box. If there aren't obvious crevices or hollows in your yard, building a nesting box or birdhouse is a simple carpentry project. Make sure the birdhouse is constructed to match the size of the birds you want to attract, or the size of the birds you see flying near your home.

For a higher chance of success, follow birdhouse building instructions specific to common North American species.

Clean out the birdhouse regularly whenever birds are not nesting.

5. Make a bird's nest. Many birds prefer to make their own nest rather than move in to a ready-made one. Lining natural hollows with the nesting materials listed above may give a bird an attractive head start. If you want to make a different type of nest, such as a cup or platform nest, it's best to follow the specific habits of the bird species you want to attract. Each species tends to prefer certain materials.

Placement of the nest is also important. Many bird species hide their nest amidst thick branches, but some prefer more open branches, bushes, or open patches of ground. Look for more information on NestWatch, through online searches, or in a local bird nest identification guide.

Things You'll Need.

Any yard clippings, especially twigs and grasses, String or yarn, Mud, spiderwebs, or caterpillar cocoons.

Human hair or animal fur, Small amount of lumber and nails (to build a nesting box, if hollow logs not available).

Question : Where do you get all the supplies?
Answer : You can find the necessary items on the ground in a park or wooded area, perhaps even your back yard!

Question : How do I make the nest big?
Answer : You can use longer sticks that are pliable enough to bend. Just make sure not to break them.

Question : What if I live in the city?
Answer : If you live in the city and want to attract birds, put up bird feeders. Birds love cracked corn, nyjer seeds, black oil seeds, fruits, and millet. Just make sure to take measures to keep the squirrels out.

Question : Am I allowed to take care of a wild baby bird if its mother is away and it's storming outside?
Answer : No. Leave the baby bird alone. Its mother will come back for it. Wild animals can take care of each other and themselves, they very rarely need our help. The bird will be fine in the storm.

Question : How do I make a bottled nest box?
Answer : Just take a milk bottle (not glass) and make an opening in the body of the box. Then take a rope and make holes at the top and tie the rope to the holes. Make sure you make it tight.

Question : Can I hatch the eggs myself?
Answer : If it is a wild bird egg do not touch it. In the USA it is illegal to take care of wild birds.

Question : Can I look at the eggs when they have been laid?
Answer : You can take a peek, as long as the mother bird is not nearby. Make sure you don't touch the eggs, as you will leave a scent behind that the mother bird can detect.

Question : Are most bird nests made of straw, twigs, and mud?
Answer : Yes, that is what a typical bird nest is made of.

Question : What can I do about wild animals that eat the eggs?
Answer : It depends on the animal. For squirrels, you can't really do anything, but for other birds you can find a better spot to put the nesting box. You shouldn't worry too much, because the mother bird will protect it's young with her life.

Question : Can I make a bird nest from leftover grass from a lawn mower?
Answer : Lawn clippings are probably too short to make a decent nest. Maybe if you collect it and dry it out you can use a few pieces to line the nest.

Tips.

For a quick and easy nest, shred or cut a paper bag into thin strips. Line a bowl with a paper towel, arrange the strips over them, then glue the paper bag strips together and let dry into a nest shape.

It’s fine to take a look at the eggs, but be careful, because smart animals like coyotes can follow you to the nest. If you have no predators in the area, taking a look at the eggs will leave a scent, but birds don’t have a sense of smell.

Warnings.

If a wild bird moves in to your nest, don't disturb it or the surrounding area. Watch the nest from somewhere the bird can't see you, or you may scare the bird away or attract predators to the nest.

Januari 20, 2020