how to organize a craft room

How to Organize a Craft Room.

A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.

Method 1 Sorting Your Craft Supplies.

1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’

Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.

2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.

At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.

To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.

3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.

Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.

Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.

4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.

Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.

5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.

Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.

Method 2 Implementing a Storage System.

1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.

Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.

2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.

Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.

Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.

Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.

3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.

4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.

Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.

For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.

Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.

5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”

You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.

6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.

Method 3 Organizing Your Space for Creative Inspiration.

1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.

In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.

2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.

3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.

4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.

To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.

5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.

6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.

Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.

Tips.

You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.

Warnings.

Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.

November 25, 2019

easy kid craft

easy kid craft

One of the #1 things that people often say to me is, “I would love to make creative projects with my kids, but I’m just not crafty. I don’t even know where to start!” My reply is always, “Trust me, you do NOT need to consider yourself ‘crafty’ to start getting creative with your children!”  There are hundreds upon hundreds of craft projects that you can make with your children that require NO special skills or tools and that take less than half an hour of your time. In fact, most of these 50+ quick and easy kids craft project ideas that I’ve rounded up here actually take less than FIFTEEN minutes to make!



WHY CRAFT WITH YOUR KIDS?

A recent study by Dr. Richard Rende revealed that creative interaction between parents and young children engaging in activities like arts and crafts not only provides immediate and lasting cognitive benefits but also creates a unique bonding experience, which creates lifelong memories. Taking time to be creative with your children is a topic that I am incredibly passionate about. I know firsthand the benefits that children reap when they are exposed to arts and crafts activities, and in an age where arts are in a decline in the school systems, it is even more important than ever for parents to take the initiative to introduce art activities to their children.



Other key findings of Dr. Rende’s study showed that:



• Arts and crafts engage multiple brain areas simultaneously and

improve bilateral coordination between the left and right sides of

the brain, leading to immediate and future cognitive development.



• Activities like arts and crafts accelerate the development of muscles

in the hands and fingers, improving fine motor skills that are

essential for school success in the earliest formal years.



• Face-to-face interaction in the early years is critical for optimal

social development.



• Arts and crafts promote rich social interactions that help develop

language skills and social cognitive abilities like understanding

emotions.



• Creative activities are a great way to bond with children and create

lasting memories.



Nearly 90% of the parents surveyed for the study said that they would like to spend more time creating arts and crafts with their children, but they didn’t know where to start or how to carve out the time needed.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative

November 01, 2019

how to easy build a ballista

How to Build a Ballista.

If you like medieval weaponry capable of flinging arrows through the air, try building your own ballista. A ballista consists of a frame, a launch ramp with a slide, and a tensioned string. You can build all of these components with popsicle sticks, thread, and other basic supplies. Add a launch pin to create a small ballista that enables you fire bolts with a pull of a string.







Part 1 Assembling the Frame.



Drill holes through a pair of 6 in (15 cm)-long popsicle sticks. Measure 1 in (2.5 cm) from the ends and mark the spots with a pencil. Before working on the sticks, lay down a piece of cardboard to protect your work surface from damage. Then, use a drill bit 1⁄4 in (0.64 cm) in diameter to create the holes.

The simplest way to create a ballista is with inexpensive popsicle sticks, available online, at craft supply store, and other areas.

If you wish to make a larger ballista, trying using larger pieces of wood or foam in place of the popsicle sticks.



Poke a second, smaller hole next to each of the bigger ones. Measure about 1⁄4 in (0.64 cm) along the stick’s length from one of the existing holes. Use a steel probe 1⁄16 in (0.16 cm) in diameter or a similar sharp tool to poke all the way through the wood. Position the hole so it’s slightly lower, closer to the edge of the stick, than the larger hole. Create a matching hole on the opposite end of the first stick and create corresponding holes on the second stick.

Each popsicle stick has 4 holes when you’re finished, a pair of holes on either end. The bigger holes are used to secure the ballista frame together, while the smaller holes are for the launcher.

To test the smaller holes, try squeezing a wood cocktail skewer through them. Get skewers about 7⁄64 in (0.28 cm) in diameter. Widen the holes as needed to fit the skewers.



Cut a pair of wood blocks to 1 1⁄2 in × 1 in (3.8 cm × 2.5 cm). The easiest way to do this is to purchase wood crafting blocks. If you can’t find the exact size you need, cut the blocks to size with a crafting knife or another tool. Get blocks that are about 1 in (2.5 cm) tall. Scrape away the excess wood until both blocks are the same size.

Shop online or visit a craft store to see what kind of wood blocks are available. You can use scrap wood if you wish, but crafting blocks are much smoother and easier to work with.

Be careful when using a crafting knife. The blocks are small, so it’s easy to slip while handling the blade. Work slowly to avoid potential accidents.

Image titled Build a Ballista Step 4

4

Glue the blocks to the ends of the popsicle sticks. Heat up a hot glue gun loaded with a fresh stick of white glue. Spread a layer of glue over the ends of the 1 of the sticks, then lay the blocks on top of that. Align the longer ends of each block with the edges of the popsicle stick. Spread another layer of glue on top of the wood blocks to secure the second popsicle stick.

Make sure you align the holes in the popsicle sticks before gluing them in place. The holes need to be positioned evenly over one another in order for the ballista launch its arrows later.







Part 2 Building and Attaching the Launch Ramp.



Cut about 1⁄2 in (1.3 cm) off the end of another popsicle stick. Trim this new stick to size by measuring and slicing it apart with your craft knife. Another safe way to do this is by snapping the end off with scissors or wire cutters. Trim any stray wood fibers off the cut end so it looks smooth and even.

Cutting popsicle sticks can be tricky since they are pretty fragile. Work slowly, gradually deepening the cut you make. Bend the popsicle stick back and forth along the groove you cut to prevent it from splintering.

If you have experience with wood cutting, try using a fine saw blade like a band saw. Always wear earmuffs, eye goggles, and a dust mask while operating a saw.



Trim a pair of cocktail skewers to 5 1⁄2 in (14 cm) in length. Get some wood skewers about 7⁄64 in (0.28 cm) in diameter. Measure and mark the skewers as needed with a ruler and pencil. Then, cut the skewers evenly on both ends to trim off the sharp points. The skewers need to be the same length as the popsicle stick you cut, so use it for comparison.

Wood skewers are available online in addition to some craft stores, general stores, and restaurant supply stores.

Cut the skewers by using a craft knife or by snapping the ends off with wire cutters.



Glue the skewers to the top of the popsicle stick. Place the skewers on the long edges of the popsicle stick you cut. Lay down a bead of glue from a hot glue gun to secure the skewers in place. Trim the ends of the skewers as needed to smooth them out and make them even with the ends of the stick.

Now you have a basic launch ramp. The skewers form a groove for you to load the ballista’s ammunition.



Secure the ramp to the center of the frame you built. Get your popsicle stick frame with the holes drilled in it. Turn the ramp over and spread some hot glue on the end of it. Then, secure it over the bottom popsicle stick in the frame. Put it as close to the center of the frame as possible, aligning the end of the ramp with the back edge of the frame.

Hot glue dries relatively quickly, so you don’t need to worry too much about the frame and ramp components coming apart. Set the pieces aside as needed for 10 to 20 minutes to give the glue a chance to solidify. It takes about 24 hours to fully cure.







Part 3 Creating the Launcher Mechanism.



Break a 4 1⁄2 in (11 cm) popsicle stick into halves. Divide the stick evenly into halves about 2 1⁄4 in (5.7 cm) long. These sticks are smaller than the frame pieces and are part of the ballista’s launching system. Use a craft knife or wire cutters to split the stick across its width and then smooth out the cut end.

Purchase a separate bag of smaller popsicle sticks online or at a craft store. Alternatively, cut smaller pieces of wood boards or foam if you’re making the ballista with those materials.



Poke a hole 1⁄2 in (1.3 cm) from the end of each stick. Use a 1⁄16 in (0.16 cm)-thick steel probe or a similar tool sold at craft stores. Make a single hole near the rounded end, leaving the cut end alone. Pierce all the way through the wood.



Pull pieces of string through the larger holes in the frame. Getting the string through the holes is tricky, so have a cocktail skewer nearby to push it through. Slide both ends of a string 7⁄64 in (0.28 cm) in diameter through the top hole, then through the respective hole in the bottom frame piece. Leave the string long enough to form small loops above and below the ballista frame.

Try using twine from a craft store for a strong material that isn’t likely to break when you’re having fun launching makeshift arrows.



Tie small skewers to the frame using the string loops. Cut a couple of wood skewers down to 1 1⁄2 in (3.8 cm) in length. Start with the top loop by placing a skewer inside of it and pulling the string tight. Then, tie the loose ends of the string into a knot with another skewer underneath it.

Lay the skewers flat against the frame pieces. Orient them so they’re perpendicular to the frame pieces. Then, tie the knots as tight as you can to hold the skewers in place.



Place the small popsicle sticks between the strings and tighten them. The popsicle sticks you cut earlier fit between the frame pieces. Slide about 1⁄2 in (1.3 cm) of the cut ends of the sticks between the ropes. Then, twist the bottom skewers clockwise to tighten the string as much as possible.

When the small sticks are positioned correctly, you can move them back and forth without them sliding out of place. This is necessary for moving the ballista’s launcher to let arrows fly a long way.



Slide another skewer into each of the inner holes on the frame. Cut 2 more skewers to 1 1⁄2 in (3.8 cm) in length to fit those holes. Make them look nice and even like the other skewers before fitting them through the frame. Make sure the skewers go all the way through the respective holes on the top and bottom frame pieces.

Protect the strings by tying the ends to the bottoms of these skewers, if possible. If you do this, the skewers maintain the string’s tension, leading to much more impressive launches!



Tie a length of string between the launcher’s stick arms. Set the ballista so the back end is in front of you. Thread the 7⁄64 in (0.28 cm)-thick string into the holes in the small popsicle sticks hanging from the ballista frame. Knot both ends of the string to secure it, then trim off the excess length.

The exact length of string you need to form the launcher depends on the material you used. Try threading the string through both holes before cutting it from the spool. Always cut it longer than you need so you can knot it tightly.







Part 4 Making the Slide and Supports.



Glue a block underneath the back end of the launch ramp. Get another 1.5 in × 1 in (3.8 cm × 2.5 cm) wood block. The block needs to be approximately the same width as the ramp in order to keep the ballista stable while you’re firing it. Set the ramp in the glue, aligning its back edge with the back end of the block.

Installing the block makes the ballista ramp slanted so it launches arrows higher into the air.



Cut grooves in a small block to create the ballista’s slider. Cut the grooves into a small piece of wood about 1.5 × 1 × 1⁄2 in (3.8 × 2.5 × 1.3 cm) in size. The launcher needs separate grooves in the front and back, both as thick as the string you used when tying the launcher arms together. Make the 2 grooves about 1⁄4 in (0.64 cm) from either end. Use a crafting knife to scrape away the wood, making the grooves circular and about half as deep as the block.

Try making the slider out of a wood peg bought online or a craft store. If you use scrap wood, make sure it is solid and smooth so you can slide it along the ramp.



Create a 1 1⁄2 in (3.8 cm) wood cap to fit on top of the slider. Simply cut a smaller popsicle stick to the exact length and width as the slider. Cut the cap into a rectangle with no rounded edges. When you’re ready to install it, put the launcher string into the slider’s front groove. Spread some hot glue, then press the cap onto the top of the slider.

Test the cap out by putting it on the slider before you add the glue. Check that it’s big enough to cover the slider and pin the string in place.



Drill 45-degree angle holes in a block of wood. This block needs to be about 2 × 1 1⁄2 × 1⁄2 in (5.1 × 3.8 × 1.3 cm) longer than the one on the back end of the ballista. Position the holes about 1 in (2.5 cm) from the smaller sides of the block. Use a drill bit approximately 1⁄4 in (0.64 cm) wide to drill diagonally towards the center of the block.

Drill all the way through the other side of the block. Keep the holes as even as possible to build a stable base for the ballista frame.



Fit wood dowels into the holes on the block. Use a pair of 1⁄4 in (0.64 cm)-thick dowels cut to about 4 in (10 cm) long. Slice them using a craft knife, wire cutters, or a saw if you have one. Then, put some hot glue on the ends of the dowels and push them as far into the holes as possible.

Look online or at a local craft supply store for the perfect dowels for your project.



Glue the block to the front side of the frame to stand the ballista up. Flip the block over and spread a thick bead of glue across its length. Lift up the front end of the ballista to stick the block to the bottom of the frame. After pressing the pieces firmly together, consider letting the glue dry for about 10 minutes.

If the block is wider than the frame, you could try whittling it down with a carving knife or craft knife. As long as your base is stable, doing this isn’t necessary, but it can make the ballista look a little neater.







Part 5 Completing the Firing Mechanism.



Glue long spacer pieces to the sides of the back block. Cut the spacer pieces so they are about 4 in × 1.5 in (10.2 cm × 3.8 cm) in size. Spread more hot glue, then press them against the block supporting the back end of the ramp. These parts are there to support the rest of the parts you need to add, so they don’t need to be pretty and can be longer than the block itself.

Make sure the spacer pieces stick out from underneath the ramp a little bit. The pieces that attach to them need to extend over the ramp or else you won’t be able to fire the ballista.



Cut 1 1⁄2 in (3.8 cm) off the ends of a large popsicle stick. Measure and mark the length you need to cut on one of the 6 in (15 cm)-long popsicle sticks. You need 2 of these pieces, so cut off both ends of the stick. Leave the rounded ends of the stick intact.

Cut the stick carefully with a craft knife, wire cutters, or saw. Work slowly to avoid splintering the wood and smooth out the edges as needed.



Make a hole about 1⁄2 in (1.3 cm) from the end of each piece. Create the holes by poking a 1⁄16 in (0.16 cm) steel probe or a similar sharp tool through the wood. Keep the holes along the center part of the wood. Make them as even as possible to ensure the ballista parts line up appropriately when you install them.



Glue the popsicle ends to the side pieces on the block. The sticks need to be near the tail end of the block. Also, position the sticks about 1⁄4 in (0.64 cm) up from the bottom edge of the block. Spread glue over the wood and press them onto the block to hold them in place.

Make sure the ends of the sticks extend over the ramp. The holes need to be about level with the top edge of the slider in order to string the launch rope through it.



Bend a metal rod to fit through the holes in the wood. Get a metal rod about 4 in (10 cm) long and about 1⁄16 in (0.16 cm) in width to fit through the holes. Pull the launcher piece back and thread the rod through its second groove and the holes in the sticks. Then, use pliers to bend one end of the rod back over itself. The rod forms a launch pin that stays in place until you're ready to use it.

Test the pin by attempting to move it. If it feels loose, bend the end back on itself more to keep the pin in place. Leave the other end of the pin alone so it can slide out of the hole.



Tie a string to the end of the launch pin. Cut some 7⁄64 in (0.28 cm)-thick string to complete the launching mechanism. Try trimming it to about 3 to 4 in (7.6 to 10.2 cm) in length. Knot the string a few times to the bent end of the launch pin to quickly pull it out when you wish to fire the ballista.

Keep the string at a comfortable length. If it is too long or short, you may have a hard time pulling out the pin in a quick, fluid motion.



Cut cocktail skewers to about 5 in (13 cm) for ammunition. Trim the pointed ends off of as many skewers as you wish to use. When you’re ready to use the ballista, put a single arrow on the chute after pulling the slide back. Yank the string to pull the metal pin out, causing the slide to spring forward, sending the arrow through the air.

Always cut the points off of the skewers to avoid accidents. Also, never shoot the arrows at others. They can hurt, especially from bigger launchers.







Tips.

Ballista arrows are reusable. Collect the arrows after you fire them to ensure you have a steady supply of ammunition.

Small ballista designs can be blown up to create big rigs capable of throwing arrows long distances. Many big ballistas use wood planks and thick rope like the kind available at hardware stores.



Warnings.

Firing a ballista can be dangerous. To be safe, clear an area outdoors and fire it when no one else is around.

If you choose to use a saw to cut components, follow proper safety procedures to avoid injuries. Always wear earmuffs, goggles, and a dust mask.



Things You’ll Need.

Ruler, Craft knife, Wire cutters or scissors.

6 in (15 cm)-long popsicle sticks, 4 1⁄2 in (11 cm) popsicle sticks.

1 1⁄2 in × 1 in (3.8 cm × 2.5 cm) wood blocks, 7⁄64 in (0.28 cm)-diameter wood skewers, 1⁄4 in (0.64 cm)-diameter wood dowels.

1⁄4 in (0.64 cm) drill bit, Drill.

1⁄16 in (0.16 cm) steel probe, Hot glue stick, Hot glue gun.

7⁄64 in (0.28 cm)-thick string, 1⁄16 in (0.16 cm)-diameter metal rod.

November 20, 2019

how to make minnie mouse ears

How to Make Minnie Mouse Ears.

Mickey's sweetheart has the fashion sense to wear a bow in her ears, but Minnie mouse has very similar ears to those of her beau. In some special costumes, Minnie has also been known to wear a crown, a Santa hat, and other seasonal accents between her ears. The ears are always black, of course, and the bow usually red with white polka-dots, but you can choose your favorite patterns and colors to make the bow you place between your Minnie Mouse ears.

Part 1 Making the Ears.

1. Gather the material for making your mouse ears. You will need black felt to give your mouse ears color and texture. A cardboard core will give your fabric rigidity and form. If you don't have any cardboard, you might be able to layer several pieces of rigid construction paper together with glue as a substitute. The material you use for the ears should be stiff enough to keep it from flopping around loosely once attached to the headband and if you don’t have felt, you can paint or color the cardboard black.

Black felt, Cardboard, Rigid construction paper (optional), Household glue, Plain paper, Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long).

You should be able to purchase everything you need for this project at your local fabric or craft store.

2. Purchase a headband and tools, if necessary. The headband can be any color, but it should be at least ½" (1.27 cm) thick. You will eventually attach your mouse ears to the headband, so thicker headbands might give your mouse ears greater stability. Including a head band, you should also purchase the following tools.

Headband, Hot glue gun (and glue), Household glue, Pencil, Pipe cleaner. Scissors.

3. Make two identical paper circle templates. You should trace two circles on your paper with a pencil or your chalk. Each circle should be between 3” and 5” (7.6 and 12.7 cm) and have a ½” (1.27 cm) tab at the bottom of the circle. These templates will be used to assist you in outlining the dimensions of your mouse ears on both fabric and cardboard.

The tabs will on the bottom of your circles will be used to secure the ears and the headband together.

You might be able to use the base of a bowl to help you in drawing identical circles for both of your templates.

4. Outline your felt circles onto your felt. Place your paper template on top of the felt and trace the circle with chalk onto it. You could use a piece of tailor’s chalk, or even regular chalk in a pinch. This way, you can wipe any leftover chalk away with a damp cloth.

Make four felt circles for every pair of ears you make. You will need to glue felt to the front and back of your cardboard core to make your mouse ears uniformly black.

5. Cut your felt circles. Take your scissors and follow the chalk outlines you've drawn to cut free your felt circles free from the fabric.You can add some jazzy flair to your mouse ears by using zig-zaggy pinking shears.

Pinking shears will add a cute border to your fabric and prevent your fabric from becoming frayed.

6. Trace cardboard circles for your mouse ears. These cardboard circles will form the core of your mouse ears, making it possible for them stand up straight, just like Minnie's! Use your pencil or a piece of chalk to trace the circle template onto the cardboard.

You will need two cardboard circles for every pair of ears you make.

7. Cut out your cardboard circles. Using your scissors, follow the chalk or pencil outline you drew with your templates onto the cardboard. Be sure you don't cut off your tabs! These will be necessary to connect your mouse ears to the headband.

You may need to touch up your cardboard and felt circles/tabs to make them as close to identical as possible.

Compare and trim your felt and cardboard circles by holding the cardboard and felt pieces together in a stack. Then you can trim down any irregularities.

8. Glue the felt to the cardboard. Household glue should be sufficient to attach a piece of felt to the front and back of each cardboard circle/ear. Drizzle glue back and forth along the cardboard and press your felt into place. Press the felt to the glue firmly for five to ten minutes help it set.

To create the best bond between your glue and the felt, you may want to allow your glue to rest for 30 minutes to an hour.

Part 2 Attaching the Ears to the Headband.

1. Spread hot glue along the tabs of the ears. Regular household glue won’t hold up to wear and tear as well as hot glue. The special glue used in hot glue guns, however, is much more durable. It will create a firm bond between ear and headband.

You'll have to move quick after you apply your hot glue. The glue will dry quickly soon after application.

Hot glue fresh from the gun will be very hot. Be careful not to burn yourself.

2. Hot glue the tabs of your circles to the underside of the headband. Your circles should be at least 4” (10 cm) apart so that you have room for the bow that will go between the ears. You may want to mark your headband with your chalk where you'll be attaching the ears to prevent yourself from gluing them into the wrong place.

If your headband is flexible or will permit the use of staples, you could also use a hardy stapler to connect the tabs of your mouse ears to your headband.

3. Allow the glue to dry thoroughly. Playing with your mouse ears before the glue has completely dried could cause your mouse ears to come free of the headband. To ensure you don't have to re-glue any of your pieces together, you should allow your glue to firm for 30 minutes to an hour.

4. Style the ears into position. Your mouse ears might not stand straight up like Minnie Mouse's at first. To encourage your mouse ears to hold this position, fold both up and forward. The glued tabs will keep the ears in place.

Part 3 Creating the Bow.

1. Measure and cut a 10” (25 cm) length of ribbon or fabric. You can use either ribbon or fabric for your bow, although ribbon will likely be a little shinier and look more like the bow Minnie wears. In either case, it should be 5” to 8” (12.7 to 20.3 cm) wide. You will eventually gather this fabric around its middle, which will cause the sides to fan out. This will give your bow its shape.

Thicker cuts of fabric will create more bunching when you gather this piece around its middle, which will give your bow a fuller appearance.

2. Measure and cut a 3” (7.6 cm) gathering string. This is the piece you will use to gather the fabric around the middle of your 10" (25 cm) length of ribbon. You should use a similar kind of fabric to your 10" (25 cm) ribbon, but you could also add some pop to your design by using a contrasting color fabric.

For example, if you are using Minnie's traditional bow color, red with white polka-dots, you might choose a bold blue for your gathering string.

3. Lay the 10" (25 cm) piece of ribbon on a flat surface. Put the print side face down. You're going to want to glue your gathering string along the back of your bow, which will be the same as the opposite side of the pattern.

4. Fold the long ends your 10" (25 cm) ribbon toward its center. You'll want each side to overlap slightly at the center of your 10" (25 cm) length of ribbon. Fold one end at a time so that there is enough overlap to glue these side where the meet at the center of the ribbon.

5. Glue the folded inward ends at the overlap. It should only take a dab or two of hot glue or fabric glue to join the ends together firmly. Press the fabric firmly to create a stronger bond between the fabric and glue.

You should follow the directions on your glue to achieve the best bond. Some glues will set and cure faster than others. Generally, you should hold the glue firmly for one to five minutes for best results.

6. Arrange your ribbon into a bow shape. Use one hand to pinch your ribbon together toward its centermost point from the top and bottom edges. This will be easiest to do if you are working with a ribbon that is at least 5” (12.7 cm) wide.

Pinching your ribbon together tightly will cause the outside edges to flare out more dramatically.

7. Loosely wrap your gathering string around your bunched ribbon. The 3” (7.6 cm) piece of ribbon will hold the fabric of your bow in its flared position. Wind it around several times and then remove your fingers where you were pinching the bow in the middle.

Hold the ribbon with your free hand to make sure it doesn't come unwound or loose.

Wind the remaining length of your ribbon around the center tightly.

8. Glue the gathering string in place. Lift one end of the small piece of ribbon and apply a dab of hot glue or fabric glue. If using hot glue, you should be careful not to burn yourself by pressing on the fabric immediately after glue application.

To apply pressure to make the best seal between your hot glue and fabric, you might use a tool to prevent getting burned, like a paperweight, gloved hand, or tweezers.

Fabric glue and other cold glues should be held together firmly to encourage a strong bond. Press the glued piece of ribbon together. Hold this position for about 30 seconds to a minute.

Part 4 Attaching the Bow to the Headband.

1. Slip a pipe cleaner through a fold in your bow. The bunchings of your bow fabric should have created folds through which you can thread your pipe cleaner so that it passes under your glued gathering string.

If you find it difficult to feed your pipe cleaner through a fold and under your gathering string, you can always use glue to attach the pipe cleaner along the back of your bow.

A dab of hot glue onto the back of your gathering string should be enough to hold your pipe cleaner in place.

2. Cross one end of the piper cleaner over the other. Orient your pipe cleaner so it is equal length on both sides of your gathering string. Now cross the sides of your pipe cleaner at the midpoint over the front of your gathering string and add a twist.

This will prevent the pipe cleaner from slipping out of the bow while adding stability to the bow in general.

Experiment with different colored pipe cleaners to personalize your Minnie Mouse ears!

3. Secure your bow with the loose ends of the pipe cleaner. Center the bow between the ears. Then you're going to wrap each end of the pipe cleaner around opposite ends of your headband. Twine each side of the pipe cleaner down opposite ends of the headband until you go no further.

The ends of pipe cleaner can be pointy. To prevent the wearer from getting poked, you may want to turn these inward on your headband. The ends can also be taped to the headband as an extra precaution.

By attaching your bow to your mouse ears with a pipe cleaner, you'll be able to swap out different bows without having to make a new pair of mouse ears.

Twist ties can be used to reinforce your pipe cleaners if you find the pipe cleaner windings are not holding the bow in place well enough.

4. Add finishing touches and show off your mouse ears. Minnie, being a stylish mouse, would probably go ga-ga over some rhinestones, glitter, feathers, or other accents you might add to your mouse ears. Most of these can be attached with a small dab of hot glue. Once you've finished adding your finishing touches, you should show off your mouse ears to all your friends.

Tips.

Use a black felt tip marker to color white pipe cleaners if you don't want the white to show too much.

Warnings.

Hot glue emerges from the gun applicator at a very high temperature. Whenever using hot glue, you should follow the instructions that came with your glue gun and take care.

Things You’ll Need.

Ribbon (10” (25 cm) long), Ribbon (3” (7 cm) long), Black felt, Black felt tip marker, black crayon or paint (optional), Cardboard.

Chalk, Foam (optional), Headband, Hot glue gun, Household glue, Pipe cleaner, Plain paper, Scissors, Stiff construction paper (optional).

Desember 12, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).

Desember 14, 2019

how to make a paper bag turkey

How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).

Januari 27, 2020