When your favorite book is starting to look a little worn around the edges, or you’re in the mood to give the cover a makeover, try making your own book cover or creating a special cover using craft supplies. Or, if your used book is ready to be donated or replaced, don’t get rid of it just yet. You can easily repurpose old book pages into a beautiful paper wreath to decorate your home or office.
1. Choose a material to use as a book cover. You’ll want enough of this material to cover both the front and back covers of your book, and excess material to make sure the cover stays on when the book is opened or closed. A paper book cover will work best on hardcover books and may slip off of paperback books; if you’re covering a paperback book, reinforce the cover with tape if needed. Paper materials you can use to make your own book cover include:
a brown paper grocery bag that can be decorated.
an old map for history lovers or travelers.
sheet notes for musicians.
magazine pages for fashion and beauty enthusiasts.
construction paper or wrapping paper for crafters.
2. Cut more than enough paper to cover your book. Lay out more paper than you think you’ll need (similar to wrapping a gift with wrapping paper) before cutting it. Place your open book on top of the paper and measure a rectangular piece of paper larger than the book itself. A good rule of thumb is to have at least 2 inches of excess material all round the edges of your book. Cut the piece of paper you measured out.
3. Fold the top and bottom edges of your paper inward. Center the book on your paper and fold the top edge of the paper inward. Create a crease by folding it against the book’s hardcover edge. Repeat this step with the bottom edge of the paper.
If you are using printed paper like a brown grocery bag or magazine pages, place it printed side up so that any designs you don’t want shown on your cover will be hidden.
4. Finish folding the paper around the book to complete the cover. Close your book and place it slightly right to the center of your paper cover, leaving about 2 inches of excess paper on the right. Fold the left edge of the paper over the book to meet the right edge. Crease the left and right sides of your paper along the book’s edges.
You can adjust your book’s placement to make sure the edges meet evenly. This will create even side flaps for your book cover.
5. Wrap the paper securely around your book. Open your book and slide the front cover into the left flap you just made. Bring the right side of the paper over to cover the book and reinforce the right crease if needed. Then slide the back cover into the right flap. Your new book cover is ready to be shown off or decorated.
Warnings.
Be careful when using the craft knife to cut your book cover.
Do not leave a hot glue gun unattended. Be sure to turn it off and unplug it after use.
Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!
Steps.
1. Get one white, one black, and one orange sheet of construction paper. Since origami can be a bit difficult (and not very exciting) for younger children, the good old method of cutting and gluing construction paper might be more up their alley. This method of making a paper penguin calls for one white, one black, and one orange sheet of construction paper.
2. Trace an oval shape onto the black construction paper. To form the body of the penguin, have the child draw an oblong oval on the black construction paper with either a white crayon or a piece of chalk so that they can see the outline. One fun and silly way to help the child make the shape is to have him or her place their shoe on the sheet and trace the outline of it.
3. Cut out the black oval. Using a pair of scissors (safety scissors for younger children), have the child cut out the black oval from the construction paper. When it comes to the eyes later, you can have the child either draw them on the white paper or cut pupils out of the black paper. For the latter, you can have the child cut those out now as well.
4. Trace a smaller oval onto the white construction paper. You can now have the child trace the white portion of the belly on the white construction paper. You can find something of the relative oblong shape to let the child trace it again or simply allow them to do it freehand.
5. Glue the belly to the rest of the body. Once the child is done tracing the white oval, allow them to cut the shape out of the construction paper. Then use a glue stick to glue the tummy portion to the rest of the body. Glue it closer to the bottom of the body portion than the middle since the head should be above it.
6. Cut a small triangle out of the orange construction paper. To make the beak for the penguin, have the child cut a small triangle out of the orange construction paper. The beak doesn't have to be an exact triangle, so you can have the child trace it first or simply cut one out.
For very small children, the size of the beak might be too difficult for them to cut out, so you may have to help with this step.
7. Glue the beak to the penguin's face. You have two different options to glue the beak to the penguin's face. You can either glue the triangle flat with one of the points facing downward, or you can actually make a little fold on one of the flat sides and glue it at the tab, which will make the beak stick out from the penguin's face.
8. Make the penguin's eyes. As mentioned earlier, you can have the child draw eyes on the white construction paper, cut them out and glue those to the penguin, or you can also have the child cut the whites of the eyes from the white construction paper, then use the black construction paper to cut out the pupils.
A third option if the child is too young to cut out such small circles is to have some googly eyes on hand from a craft store or the craft section of a big-box store. Young kids may have an easier time using a glue stick to attach google eyes instead.
9. Let the child customize it. This makes an easy basic shape for the penguin, and then the child can have fun customizing it. If the child cuts out two really flattened ovals from the black paper, he or she can glue them to the side of the body as wings. If the child wants to make feet for the penguin, you can have them trace a leaf or something else with the slight contours to give them the webbed shape.
Things You'll Need.
Scissors.
One white, one black, and one orange sheet of construction paper.
Every hobby has its learning curve, and embroidery is no exception. Avoiding mistakes can save you time, money and frustration.
Reviewing these top 20 common—and avoidable—embroidery mistakes, and you'll know what to avoid before starting your next embroidery project.
Not Reading the Instructions
Always read the instructions. Using the wrong thread or number of strands of embroidery floss is one of the most common errors that happens when you skip reading the instructions. With kits, this can lead to running out of thread before completing the project. It also may result in a different line thickness than intended.
Choosing the Wrong Embroidery Fabric
Most forms of surface embroidery require a firm fabric foundation, often with a thread count of 28 or higher. Using an embroidery fabric with a lower thread count can result in poorly-formed stitches, although you can add stabilizer to create a better surface. Counted Thread or Pulled Thread projects require a lower, looser thread count. This makes it easier to pull and remove threads and create lacy stitches.
Selecting the Wrong Size of Needle
Using an embroidery needle that is too large for the project can result in holes in the fabric where the needle and thread enter or exit.
Using a Sharp Needle Instead of a Ball-Point Needle
Use sharp needles when the needle and thread need to pierce the fabric, as in surface embroidery and crewel.
Starting and Ending a Thread With Knots
Although not the worst mistake ever, it's best to avoid knots in any type of embroidery project. Instead, start a new thread with a waste knot, away knot, or by weaving it into the back of previously worked stitches.
Selecting an Embroidery Thread of the Wrong Thickness
Generally, bold lines of embroidery require thicker embroidery threads and narrow lines require finer threads. Combine threads to make a thicker strand and separate floss into single strands or groups of strands for working thinner lines.
Using Craft Thread Rather Than Embroidery Thread
Inexpensive thread sold in packages as a “Craft Thread” (often 6-strand floss or #5 pearl cotton) are for craft projects such as friendship bracelets, macramé, or children’s crafts and not for embroidery.
Marking Your Fabric With a Regular Pen
It's best to use a water-soluble fabric marking pen, chalk pencil or fabric pencil to mark your embroidery design on your fabric.
Using Heat Transfer Pencils Instead of Water-Soluble Fabric Pencils
Transfer pencils and pens are great for making iron-on designs, but they are permanent.
Iron Transfers Are Fuzzy or Distorted
When using iron transfers (either that you purchased or made with a heat transfer pen), fuzzy markings result when you slide the iron back and forth on the pattern paper. Instead, press the iron on the back of the pattern paper just long enough to transfer the markings.
Not Using an Embroidery Hoop or Frame
Using an embroidery hoop, scroll frame, or stretcher bars keeps the fabric taut and makes it easier to work accurate, well-formed stitches.
Rolling Fabric on a Scroll Frame in the Wrong Direction
Roll fabric on the bars of a scroll frame with the wrong sides of the fabric rolled to the outside (facing you).
Not Removing the Hoop Before Storing
Always remove your embroidery hoop before putting away your embroidery for the day, and especially before storing it for any length of time.
Not Enough Floss or Embroidery Thread When Starting
Before you start stitching, make sure you have all the necessary embroidery threads on-hand.
Getting Your Project Dirty
Always wash your hands before working on your embroidery project and avoid snacking while you stitch.
Improper Cleaning or Laundering for the Thread or Fabric Type
If an item requires laundering, check the fiber content of the fabric and thread before washing.
Ironing a Finished Embroidery Piece and Smashing the Stitching
You work hard to create beautiful works of art with delicate and dimensional stitching.
Storing Needlework Fabrics and Finished Pieces Incorrectly
Needlework is an investment of both time and materials. Properly caring for and storing your pieces helps avoid staining and fiber breakage, ensuring you get a lifetime of use from your items.
Displaying Needlework in Direct Sunlight
Many fabrics and threads used in embroidery like to promise that they are fade-resistant.
Rushing to Fix a Mistake
If you make a mistake and find yourself picking out stitching, do this carefully and slowly.
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.
Part 1 Making the Turkey.
1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.
Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”
Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.
2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.
Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.
Be careful not to tear the bag while sealing or shaping it.
3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.
Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.
4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.
Try to make your cuts about ¼ inch apart.
Your cuts only need to be about half the width of the paper.
5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.
Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.
The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.
Part 2 Finding Creative Ways to Present Your Turkey.
1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.
If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.
Make sure to let everyone, especially small children, know that your paper turkey is not for eating.
2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.
If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.
When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.
3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!
Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.
Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]
4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.
A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.
Tips.
This will make a great activity for parents and teachers to do alongside their children or students.
If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.
Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.
Make sure you have enough of whatever food item you choose to fill the large bag.
Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.
Warnings.
Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.
Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.
Things You'll Need.
3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.
Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).
Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.
Part 1 Making the Turkey.
1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.
Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”
Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.
2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.
Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.
Be careful not to tear the bag while sealing or shaping it.
3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.
Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.
4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.
Try to make your cuts about ¼ inch apart.
Your cuts only need to be about half the width of the paper.
5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.
Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.
The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.
Part 2 Finding Creative Ways to Present Your Turkey.
1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.
If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.
Make sure to let everyone, especially small children, know that your paper turkey is not for eating.
2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.
If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.
When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.
3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!
Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.
Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]
4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.
A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.
Tips.
This will make a great activity for parents and teachers to do alongside their children or students.
If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.
Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.
Make sure you have enough of whatever food item you choose to fill the large bag.
Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.
Warnings.
Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.
Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.
Paper butterflies are not only dainty and chic, they're also fun to make. Try your hand at origami to create one or, if you're more of a crafting beginner, fold a simpler version with pretty pleats. When you're finished, use your butterflies as decor or give them to friends and family as gifts.
Method 1 Folding an Origami Butterfly.
1. Fold the paper in half, then open it and fold it in half the other way. Make sure to crease both of the folds. Line up the edges when you’re folding to ensure the crease is directly in the center.
If your paper is the same color or pattern on both sides, it doesn’t matter which side you start on. However, if one side is white, or the “backside,” begin with that side facing up.
Choosing the Perfect Paper for Your Butterfly
If you're a beginner, choose oversized origami paper. Bigger sheets are easier to work with.
For easy folding, use origami paper, because it is thinner than regular paper.
If you want to add visual interest, opt for textured paper like linen or felt cardstock.
For a dramatic accent, pick foil paper in a shimmery metallic.
2. Fold the paper in half diagonally, open it, and fold on the other diagonal. Bring 2 opposite corners together to create the folds. Press down firmly to create defined creases. Repeat on both diagonals. Open the paper to lie flat after you fold it.
Your 4 folds should intersect in the exact center of the paper.
3. Bring the right and left creases together, creating a triangle. With the paper laying flat in front of you, press the right horizontal crease to the left one. As you do this, the paper should collapse onto itself in a triangle shape along the diagonal creases you made.
Press down on the triangle to crease the paper once it’s collapsed.
If the paper isn’t folding properly, go back over your original creases again. If they aren’t defined enough, the paper will have trouble falling into the shape.
4. Fold the 2 top corners into the center. When you created the triangle shape, it made 2 layers. Grab the corners on the top layer and line up their edges with the crease in the middle of the triangle.
Try to align the corners with the crease perfectly so they aren’t overlapping or so there isn’t a large gap between the edges in the center.
5. Flip the triangle over and fold the bottom up, leaving a small tip showing. You aren’t folding it completely half. Instead you’re folding it about 1/3 up from the base of the triangle. Hold the fold in place gently with your hand.
Don’t crease the fold.
6. Bend the top layer of the tip over the base. There are 2 layers at the tip of the triangle. Peel the top 1 forward, folding it over the wide triangle bottom you’re currently holding in place. The tip will be the head of the butterfly.
Crease the fold that you make with the tip. This will help secure the body of the butterfly in place and prevent it from unraveling.
7. Pull down the pieces from the bottom layer to create the lower wings. With the top layer folded over, bring the bottom layer of the tip in the opposite direction. The points of the 2 triangular pieces should be facing down, away from the folded head.
It may help to hold the folded tip with your thumb while you pull the other pieces down so that the butterfly doesn’t come apart.
Re-crease the folded tip after you arrange the bottom pieces if necessary.
Trim the edges of the wings if you want a smaller butterfly.
Method 2 Making a Pleated Paper Butterfly.
1. Fold the square piece of paper in half, creasing it. Line up the edges of the paper when you fold it to make sure you’re creating a line directly down the middle. Press firmly with your fingernail to form the crease.
Use any type of paper you’d like, whether it’s origami paper, colorful cardstock, or even pretty gift wrap.
The size of your paper doesn’t matter, as long as it’s square. If you have a rectangular piece, simply trim it down so all of the edges are the same length.
2. Unfold the paper and cut along the crease line. Use your scissors to cut the piece of paper in half. The groove of the crease should help guide your scissors in a straight line through the paper.
Make sure your scissors are sharp so they don’t tear or crinkle the paper.
If you have trouble cutting in a line, hold your scissors against a straight edge, like a ruler, while you cut.
3. Make accordion folds with one of the pieces of the paper. Fold a small piece lengthwise, then flip the paper over to fold it back onto itself. Continue flipping the paper from side to side as you fold along the entire length of the paper. Think of this motion as similar to making a pleat or a fan.
You can make the folds as thick or as thin as you'd like.
Keep the folds all the same thickness, no matter what size you choose.
4. Take the other piece of paper you cut and fold it in half lengthwise. Place the 2 longer edges on top of each other. Then create a crease by pressing down along the fold.
Try to make the crease as straight and even as possible so it splits the paper directly in half.
5. Open it up and fold the 4 corners in toward the center crease line. Line up the edges straight along the crease. Your paper will now be in the shape of a hexagon, with 2 pointed ends formed by the folded corners.
Leave the corners folded. If they won’t stay in place, use a piece of double-sided tape or a little bit of glue under the flap.
6. Flip the paper over and make accordion folds on each side of the crease. Fold one half the paper in towards the center. Then repeat on the other side. This will be the top half of the butterfly’s wings.
Make the folds as large or as small as you’d like, depending on the size of your paper.
7. Bend both pieces of pleated paper in half. Press the pleats together and hold the paper between your thumb and forefinger. Carefully fold one end onto the other, creasing it firmly.[14]
The paper won’t stay folded, but that’s okay. You just want to make a crease, so the paper is in a V-shape.
8. Place 1 piece above the other and tie them together at the center. Arrange the 2 pieces so that they form a butterfly shape. Pinch them together while you tie string or cord around both pieces.[15]
To secure the 2 pieces together better, you can add a dab of craft glue or hot glue in the middle.
Having a friend hold the pieces together while you tie the string makes it easier to get a tight knot.
You can also use ribbon or a pipe cleaner instead of string.
9. Pull out the pleats to open up the wings. Scrunched-up folds don’t exactly resemble a beautiful butterfly. Gently pull the pleats apart so that the 2 pieces of paper look like 1 large wing on each side instead of 2 disjointed ones.[16]
Be careful not to rip the paper when you’re arranging the pleats.
Fun Ways to Use Your Butterflies
Hang them on a string or ribbon to drape as a whimsical garland in your room.
Glue the butterflies to a piece of paper or a canvas as 3D art.
Give them as gifts around the holidays.
Place them on a bookshelf or coffee table as decor.
If you are looking for different surfaces to stamp onto then how about trying artist's canvases. These are great for making decor for the home and canvas blocks are all the rage right now. This is a project for stampers happy to experiment with different techniques to create interesting results.
What Are Artist's Canvases?
Artist's canvases are typically pieces of linen or cotton canvas on which artists paint. There are two types which are commonly used, canvas board or panels, where the canvas is stretched over a piece of board. This gives a firm flat surface for stamping.
The other type is stretched canvas. These are pieces of canvas that are stretched over a wooden frame which creates a taut surface. Canvases of either type are available in a wide range of sizes, from tiny canvases through to canvases that take up an entire wall. There are a variety of different qualities of canvas available and art stores will have the biggest range on offer.
About the Surface for Stamping
The canvas surface is woven and as such it is more textured than normal cardstock. This is one of the features of the canvas which makes it a little different and interesting to work on. Note that this texture will mean that some detail in a very intricate stamped image may get lost. You will also notice that some canvases are sold as primed, others are not primed. A primed surface means that it has been treated ready for painting. Both surfaces can be stamped on, however, the inks will be absorbed by the surface of the untreated canvas and may need heat sealing on treated canvas. It is best to experiment with both types and see which gives you the results you prefer.
Where to Buy
You will find stretch canvases for sale in artists supply stores. You will also find them in craft stores and even some stationery stores as well as online.
How to Use
While you can stamp onto canvas panels with relative ease, stamping on stretch canvas presents some significant challenges, not least the fact that the canvas surface, while taut, has some movement and therefore it is difficult to stamp onto in the traditional manner. However you can achieve good results by placing the inked stamp, image side up and carefully pressing the canvas, top side down, onto the stamp. Then carefully rub over the back of the canvas to make sure the inked image is transferred from the stamp to the canvas. To use this method, your stamp must be smaller than the recess at the back of the stretch canvas.
Ink for Stamping
Unlike stamping on canvas or fabric which is going to be worn or may need regular laundry care, canvas panels are purely decorative, therefore there is no need to use fabric ink when you stamp on canvas panels. The type of ink you use depends on the results you want to achieve, however, good thick pigment inks are a great choice although they may need sealing with a heat gun. Permanent ink such as Stazon and Ranger Archival inks are also a great choice.
Mistakes
While artist's canvases are more expensive than normal paper or cardstock, you don't need to worry that all is lost if you make a mistake. If you make a mistake, simply get some white acrylic paint and paint over the image. Leave the paint to dry and when it is dry, start again!
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!
Method 1 Folding an Origami Dog.
1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.
If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.
2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.
Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.
3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.
It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.
4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.
There should be an “X” formed by the creases on the unfolded piece of paper.
5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.
Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.
6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.
Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.
You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.
7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.
There should be an open triangle when you look down at your square.
8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.
Leave the top and bottom flaps in place and don’t do anything to them at this point.
This fold will eventually become the dog’s tail.
9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.
Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.
10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.
At this point in the folding process, you’re making the dog’s head and legs.
11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”
The bottom edge should be in line with the ground if you were to pretend to stand it up.
12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.
Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.
13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.
The crease line creates a jawline for the dog.
14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.
Once you get the hang of the pattern, you can make an origami dog in just a few minutes.
Method 2 Creating a Dog Head.
1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.
If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.
2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.
To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.
3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.
Take your time when making your folds and line up the edges neatly.
4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.
You’ll use the center crease as a guide for your future folds.
5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.
Keep the fold lined up with the center crease to create a proportional face.
6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.
When you look down at your paper, you should see a very angular-looking dog head.
7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.
If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.
8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.
You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.
Method 3 Making a Hand Puppet.
1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.
Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.
2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.
Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.
3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.
If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.
4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”
The top and bottom sections are where you’ll place your fingers to make the puppet talk.
5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.
For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.
6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!
To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.
Tips
Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.
If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.
One of the #1 things that people often say to me is, “I would love to make creative projects with my kids, but I’m just not crafty. I don’t even know where to start!” My reply is always, “Trust me, you do NOT need to consider yourself ‘crafty’ to start getting creative with your children!” There are hundreds upon hundreds of craft projects that you can make with your children that require NO special skills or tools and that take less than half an hour of your time. In fact, most of these 50+ quick and easy kids craft project ideas that I’ve rounded up here actually take less than FIFTEEN minutes to make!
WHY CRAFT WITH YOUR KIDS?
A recent study by Dr. Richard Rende revealed that creative interaction between parents and young children engaging in activities like arts and crafts not only provides immediate and lasting cognitive benefits but also creates a unique bonding experience, which creates lifelong memories. Taking time to be creative with your children is a topic that I am incredibly passionate about. I know firsthand the benefits that children reap when they are exposed to arts and crafts activities, and in an age where arts are in a decline in the school systems, it is even more important than ever for parents to take the initiative to introduce art activities to their children.
Other key findings of Dr. Rende’s study showed that:
• Arts and crafts engage multiple brain areas simultaneously and
improve bilateral coordination between the left and right sides of
the brain, leading to immediate and future cognitive development.
• Activities like arts and crafts accelerate the development of muscles
in the hands and fingers, improving fine motor skills that are
essential for school success in the earliest formal years.
• Face-to-face interaction in the early years is critical for optimal
social development.
• Arts and crafts promote rich social interactions that help develop
language skills and social cognitive abilities like understanding
emotions.
• Creative activities are a great way to bond with children and create
lasting memories.
Nearly 90% of the parents surveyed for the study said that they would like to spend more time creating arts and crafts with their children, but they didn’t know where to start or how to carve out the time needed.
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
Papier-mâché eggs are both easy and fun to make. You can paint them bright colors and use them as Easter decorations, or you can paint them to look like real wild bird eggs and display them in your room. They do take a few days to dry, but they are a great, hands-on activity, which many children love. When you are finished, you can even fill them with candies, and crack them open later!
Method 1 Making Basic Eggs.
1. Blow up a balloon, tie the end into a knot, and set it down in a small cup. The cup will prevent the balloon from rolling away while you work.
2. Mix 2 parts white school glue with one part water in a small bowl. This will be your papier-mâché glue.
3. Tear some paper into small squares or rectangles. Newspaper works best, but you can also use plain newsprint paper from the craft store instead. Don't cut the paper; the ragged edges will help the paper seal together and give you a smoother finish.
Consider using both newspaper and tissue paper. This way, when you do multiple layers, you will be able to see which one you are working on.
Avoid using plain printer paper or construction paper. Both are too thick and too stiff for this project.
4. Dip a paper strip into the glue, and place it onto the balloon. Drag the strip across the edge of the bowl as you pull it out. This will remove any excess glue. Place it down near the top of the balloon. Use your fingers or a paintbrush to smooth the paper down so that it lays flat against the balloon.
5. Continue applying the paper strips until the balloon is completely covered. Overlap the strips slightly as you work from one end of the balloon to the other. Work your way from the top of the balloon all the way down to the tail end. Do not cover the tail, or you won't be able to remove the balloon.
6. Apply a second layer of paper. You don't have to dip these strips of paper into the glue. Simply stick them to the wet paper that's already on the balloon, and use your fingers or a paintbrush to smooth down the edges.
Consider using a tissue paper or plain newsprint for this layer. This way, you will be able to see what's cover and what isn't.
Two layers is ideal for eggs that you want to cut open. If you want a sturdier egg, apply a third layer. You may have to use some extra glue for this one.
7. Hang the balloon up to dry. Use a clothespin to clip the balloon to a hanger or clothesline. Wait for it to dry completely before moving on. It may take up to 2 or 3 days.
8. Pop and remove the balloon. Once the egg is completely dry, gently tug the balloon tail up so that you expose a bit of the balloon. Pierce it with a pin or pair of scissors and wait for the balloon to deflate. Once it is completely deflated, pull it out and discard it.
9. Cover the hole with 2 to 3 layers of paper and glue and wait for it to dry. Use the same technique as you did for the rest of your egg. If you wish to fill your egg, then do so before covering up the hole.
10. Paint the egg a solid color using acrylic or tempra paint and wait for it to dry. To make the paint really stand out, coat the entire egg using white primer and let it dry. Once you have your white base, you can paint your egg any color you want.
11. Add patterns to the eggs, if desired. Once your base color has dried, you can paint designs onto it. You can also draw designs using glitter glue or puffy paints instead.
Great Easter designs include: stripes, dots, and squiggles. Try to use soft, pastel colors.
12. Consider giving the eggs a final coating of gloss. Once all the paint has dried, spray or paint the eggs with a glossy sealer. You can even use a glittery sealer to give it some extra sparkle.This will help make them more durable.
If you'd like, you can cut the egg in half using jagged, zigzag lines so that it resembles a cracked open egg. When you are done, you can fill each half with fake grass, and place a little chick or bunny figure in each.
Things You'll Need : Water balloon, Newspaper, Paintbrush, Water, White school glue, Small cup, Scissors, Clothespin.
Method 2 Making Tissue Paper Eggs
1. Blow up a water balloon, tie the end into a knot, and set it down into a cup. The cup will hold the balloon sturdy while you work.
2. Pour some liquid starch or decoupage glue into a bowl. You can also mix your own glue by using 2 parts white school glue and 1 part water.
3. Cut the white tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the base for your egg. One sheet will be enough to coat three eggs.
4. Cut the colored tissue paper into 1½-inch (3.81 centimeters) squares and set it aside. This will make the outside of your egg. You can make it all one color or many different colors. Some crafters have noted that lighter colored tissue paper, such as yellow, shows the layering and overlapping more.
To make polka dot eggs, punch a ¾-inch (1.91 centimeters) circle in the center of your square using a scrapbooking hole punch. Discard the circles, and use the squares so that you get white polkadots on your egg.
5. Start applying the base layer using the white tissue paper. Brush on some of your glue onto the balloon, and press a piece of white tissue paper onto it. Smooth it down with a brush dipped in more glue. Overlap the pieces as you cover the entire egg.
Start applying the tissue paper at the top of the balloon and work your way towards the tail. Don't cover the tail up.
6. Apply the colored layer. If the tissue paper on the balloon is already damp, you do not need to apply more glue. Simply press a piece of colored tissue paper onto it, and smooth it down with a little more glue. Remember to overlap the pieces by a little.
If you are making polka dotted eggs, be careful not to cover up the white polka dots!
7. Hang the balloon up to dry overnight. You can do this by clipping the tail of the balloon to a hanger or to a clothesline. This can take 2 to 3 days.
8. Pop and remove the balloon. Make sure that the balloon is completely dry, then gently tug on the balloon tail until you expose a bit of the balloon. Pierce the balloon with a pin or a pair of scissors. Wait for the balloon to deflate, then pull it out and discard it.
9. Fill the egg with candy, if desired. Small candies, such as chocolate eggs, work great! Be careful not to overfill the egg; it is still very fragile. If you do not wish to fill your egg, you can move onto the next step.
10. Cover the hole with 2 to 3 more layers of colored tissue paper. Use the same technique as you did when first covering the egg. Let the patch covering the hole dry before moving on.
Because these eggs are made from colorful tissue paper, they don't need to be painted. You can still decorate them, however, with glitter glue if you'd like.
11. Give the eggs away as gifts or use them as decorations. To open the eggs, simply tear them apart. They make great gifts for Easter baskets!
Things You'll Need : Water balloon, White tissue paper, Colorful tissue paper, Paintbrush, Liquid laundry starch or decoupage glue, Small cup, Scissors, Clothespin.
Question : Can I fill a paper mache creation with something to make it heavier?
Answer : Sure! Candy works well if you want it to be like a pinata.
Question : Which one is stronger?
Answer : Method 1 will give you a stronger, more durable result, as newspaper is thicker than tissue paper.
Question : Which method is better to create the eggs?
Answer : It depends on what you are looking for. The 1st method is better for making stronger eggs, for example, to put heavier objects in. However, the 2nd method is better if you want to put candy in, as they are much easier to open up, especially for children. If you're thinking of using them for decorations, method 2 would make for prettier, delicate decorations indoors, but method 1 is more advisable for outdoor decorations as the eggs will be more durable against the weather.
Tips.
For a vintage design, use newspaper and don't paint the eggs. Instead, give them a coat of glossy varnish.
You should tear newspaper and newsprint, but you don't have to tear tissue paper.
You can also do this project using regular balloons as well, but it will take more time to dry.
If the egg collapses when you remove the balloon, stick a pen, pencil, or chopstick into it and push the dents out as best you can.
Paint the egg to resemble real bird eggs. Look up pictures of interesting bird eggs online, and try to copy them as best you can. You can create speckles by splattering paint over the egg.
For something quick and easy, decorate your egg with stickers. If this is for Easter, use Easter themed stickers.
If you made your egg using newspaper and wish to paint it, add a layer of blank newsprint or white tissue paper. This way, the letters won't show through.
Decoupage shapes cut out of paper onto your finished egg instead of painting the designs.
Punch out shapes out of tissue paper using scrapbook punches, and press these shapes onto your egg while it is still wet.
Try printed paper that has patterns on it. Origami paper and printed tissue paper is great for this. Avoid using thick or glossy paper, such as gift wrap; it is too thick and stiff for this project.
Warnings.
Do not get impatient when it comes to drying. The papier-mâché must be completely dry before you remove the balloon. If you remove it too soon, the whole egg will collapse!
A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.
Method 1 Sorting Your Craft Supplies.
1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’
Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.
2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.
At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.
To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.
3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.
Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.
Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.
4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.
Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.
5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.
Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.
Method 2 Implementing a Storage System.
1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.
Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.
2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.
Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.
Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.
Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.
3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.
4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.
Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.
For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.
Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.
5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”
You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.
6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.
Method 3 Organizing Your Space for Creative Inspiration.
1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.
In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.
2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.
3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.
4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.
To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.
5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.
6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.
Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.
Tips.
You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.
Warnings.
Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.
Adding a beautiful piece of art to a room is the last layer of decoration that every home needs. But a framed piece can be pricey. Instead of shelling out money for a print or painting, why not frame a gorgeous piece of fabric instead? Not only will fabric add color and pattern to a room, but it also lends personality. Plus, varying the textures in a gallery wall will add interest and depth to the space.
You can use a favorite piece of fabric that has been passed down in your family or simply a pattern that caught your eye at the fabric store. Either way, it's a great way to display a beautiful textile. Hang one of these prints on your wall as soon as possible! This is an easy project that takes less than an hour to complete.
Gather Your Materials
Small canvas
Fabric
Scissors
Hot glue
Iron
Cloth tape (optional)
Choose Your Fabric
Once you've selected your fabric, make sure it's large enough to fit around your canvas. While you can opt to use a more traditional picture frame, the canvas is a really easy way to complete this project while still showing off the texture of the fabric.
Cut the fabric to the size of the canvas, leaving at least 1 inch of extra fabric around all of the edges.
Note: If the fabric is vintage or heirloom, you can leave it as is. Don't cut or glue and simply pin it to the canvas instead.
Smooth the Fabric
If needed, gently iron the fabric to remove any deep creases. Then, stretch the fabric over the canvas and secure it using dabs of hot glue on the back frame of the canvas. You want to pull the fabric taut, but not so much so that it's going to release and look saggy when you're done gluing.
Attach the Fabric
If the fabric is delicate and you don't want to cut and glue it, put pins at each end and each side to secure it. Just be sure to pull the fabric taut as you go, so you don't end up with any weird wrinkles. If you aren't emotionally attached to the fabric, follow these steps to finish off the back of the frame.
There will be excess fabric at the top and bottom of the canvas, so to handle it in a way that is both functional and aesthetically pleasing, you're going to want to fold and glue the fabric to the canvas in a similar way that you'd finish wrapping a present. It will look finished and pretty once you're done.
Find a Place for It
Place the canvas art wherever you'd like. Add it to the top of your bookshelf or hang it on the wall. If you easily grow tired of decor, the beauty of this project—if the fabric isn't an heirloom or vintage piece—is that you can simply rip it off the canvas and start over!
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
How to Make a Paper Snake Using Toilet Paper Rolls.
Paper snakes are fun and easy to make. They are a great craft to learn about snakes. They also make great decorations for Halloween, or for nature lovers.
Steps.
1. Gather your supplies. If you have any spare toilet paper rolls laying around, you can turn them into a fun, wiggly snake using a bit of paint and string. Here's a list of what you will need:
3 – 4 toilet paper rolls, Acrylic or tempera paint, Paintbrushes, Scissors, Yarn, Red paper or ribbon, White school glue or tacky glue, Markers, crayons, or googly eyes, Hole punch.
2. Gather three to four toilet paper rolls. If you cannot find that many toilet paper rolls, you can use some paper towel rolls instead.
3. Use scissors to cut each toilet paper roll in half. If you are using paper towel rolls, cut them into thirds.
4. Paint the toilet paper rolls and let them dry. You can paint them all one color. You can also paint each roll a different color. If you want to add patterns and designs, wait for the paint to dry first.
5. Choose two rolls to be your head and tail tip and set them aside. You don't want them to get mixed up with the body of the snake.
6. Punch four holes in each body piece. There will be two holes on the top, and two holes on the bottom. The holes need to be straight across from each other. Make sure that the top and bottom holes on each side are aligned.
7. Punch two holes into the head and tail tip piece. The holes need to be straight across from each other.
8. Cut some yarn into 5 inch (12.7 centimeters) long pieces. You will need enough pieces to tie the rolls together.
9. Tie the pieces together using the yarn. Don't tie the yarn too tight, or the snake won't be able to wiggle. There should be a gap between each piece. Try to hide the knot inside the snake.
10. Add the tongue. Cut a long, skinny rectangle from a piece of red paper and cut a V shape into on end. You can also use a piece of red ribbon. Glue the flat end inside the snake's head. Make sure that it is in the middle of the mouth.
If you want your snake to have a closed mouth, ask an adult to staple the end of the roll shut, right over the tongue.
11. Add the eyes. You can draw the eyes on using a crayon or marker. You can also paint them on. If you have any googly eyes at home, you can glue them on using white school glue or tacky glue.
Tips.
Look at pictures of real snakes to get ideas for your snake.
Read a book about snakes while you work. This way, you can learn about them too.
Warnings.
Play gently with these snakes. Paper is fragile and can rip easily.
Do not let these snakes to get wet.
Adult supervision is required for cutting steps.
Things You'll Need.
3 – 4 toilet paper rolls, Acrylic or tempera paint, Paintbrushes, Scissors, Yarn, Red paper or ribbon, White school glue or tacky glue, Markers, crayons, or googly eyes, Hole punch.
More often than not, cats can be found lounging in the sun or snoozing the day away. But don’t let them fool you—they love to play. Cats love climbing, chasing, and jumping just as much as any other pet.
But all the climbing and scratching can lead to wear and tear. Instead of sacrificing your beloved couch or armchair, find some enriching toys to give your feline to keep them happy and healthy. That way, everyone can live in peace.
While perusing the pet store shelves, you may notice that most toys, treats, and beds are lacking in style. For some reason, a lot of pet products are behind the curve when it comes to aesthetically pleasing design. With DIY, you can maintain your dream home’s modern decor while giving your pet everything you need.
This DIY scratching post is sure to please your furry friend. Plus, it will look great hanging on your wall! Say goodbye to boring beige cat furniture.
Gather Your Supplies
This DIY requires a few easy-to-find supplies. To make it even more budget-friendly, head to a second-hand store to find a frame. You can easily upcycle it at a low cost.
Here’s what you’ll need:
Small rug
Scissors
Measuring tape
11" x 14" picture frame
Measure and Cut Your Rug
You may not even have to head to the store to find the carpet material for this project. If you remodeled your home, you likely already have some leftover carpet in the garage.
But if not, you can find carpet samples at local carpet retailers. Or you can use an indoor/outdoor decorative rug (like the one we used), a door mat, or even a bath rug. Just be sure your material isn’t unraveled or damaged—that’s the cat’s job.
Before using your scissors to cut your carpet, use a measuring tape to measure the size of the picture frame. Then, use those measurements to cut a rectangular section of your carpet that will fit perfectly inside the picture frame. If the first try isn’t perfect, just keep trimming away.
Your regular pair of scissors will sometimes work for this, but it depends on the material you use. If it’s difficult to cut with scissors, try using sharp shears.
Secure in Frame
Once you have cut your material to match the size of your frame, it’s time to secure them together.
First, remove the sample photo and glass cover from your picture frame. These parts aren’t necessary and you can keep them for future crafts or recycle them if you have no use for them.
If your picture frame has a kickstand on the back, it may be necessary to remove it. This frame will be hung on the wall and a kickstand on the back may make it too bulky, causing it to stick out when it’s hung up.
Secure your piece of rug or carpet inside your picture frame. Be sure to apply the cardboard backing piece that came with the frame onto the back to make sure things stay in place.
Display
The moment we’ve all been waiting for is here! Now that your DIY is finished, you’ve got an adorable piece of wall decor that looks great and satisfies your kitty to no end. Every cat will appreciate this fun toy. And when it wears out, just replace the material inside to keeping things looking new.
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
How to Make a Paper Snake Using Construction Paper.
Paper snakes are fun and easy to make. They are a great craft to learn about snakes. They also make great decorations for Halloween, or for nature lovers.
Steps.
1. Gather your supplies. You can easily make a snake out of construction paper rings. The more rings you add, the longer your snake will be. Here's a list of what you will need to make such a snake:
Several sheets of construction paper, Red paper, Scissors, Glue stick, tape, or stapler, White school glue or tacky glue, Markers, crayons, or googly eyes.
2. Find some construction paper. You will need at least three pieces. You can use all one color to make a solid-colored snake. You can also use different colors if you want a striped snake.
3. Cut the paper into 1½ to 2 inch (3.81 to 5.08 centimeters) thick strips. You will need at least 16 strips. The more you make, the longer your snake will be.
Consider stacking the paper and cutting several sheets at the same time. This will make the cutting part faster.
4. Make a ring out of a strip of paper and glue it shut. Pick up a strip of paper and bring the two ends together. Overlap them by about 1 inch (2.54 centimeters). Use a glue stick to hold them together. You can also use tape or a stapler instead.
Do not use white school glue or tacky glue. It does not dry fast enough. Your snake will fall apart before the glue dries.
If you are using a stapler, ask an adult to help you.
5. Slip a strip of paper through the ring and glue the ends together. Keep repeating this step until you run out of strips of paper. You can make your snake just one color, or you can make it many colors. You can give your snake a pattern, or make the colors random.
6. Add the tongue. Cut a skinny rectangle from red paper and cut a V shape into one end to make the fork. Fold the flat side over by about ½ inch (1.27 centimeters) to make a tab. Glue the tab to one of the end rings.
7. Add the eyes right above the tongue. You can draw them on using a marker or crayon. You can also glue them on using some white school glue or tacky glue.
Things You'll Need.
Several sheets of construction paper, Red paper, Scissors, Glue stick, tape, or stapler, White school glue or tacky glue, Markers, crayons, or googly eyes.
Tips.
Look at pictures of real snakes to get ideas for your snake.
Read a book about snakes while you work. This way, you can learn about them too.
Warnings.
Play gently with these snakes. Paper is fragile and can rip easily.
With the right supplies and a bit of time, you can make your very own paper dinosaur that stands or moves. If you'd like a bigger craft project, you could even attempt a paper mache dinosaur or an origami dinosaur! Depending on the colors that you use, you can make your dinosaur look realistic or cartoonish.
Steps.
1. Fold and cut a plain white paper plate in half with scissors. Fold the plate in half first, then use the crease as a cutting guide. For best results, use the kind that's made from cardstock and has a frilled edge, rather than the kind that's made from thick cardboard with a rim.
Set aside 1 of the paper plate halves; this will make the body.
2. Cut a dino head, tail, and spikes from the other paper plate half. Draw the shapes on the second paper plate half (the other one will be the body), then cut them out. Make sure that the limbs are proportionate to the body. Don't worry about the feet; you will be using toilet paper rolls for that.
Make the spikes about 1 in (2.5 cm) tall and wide.
Make the tail about 1 to 2 in (2.5 to 5.1 cm) wide at the base, and about 1/2 to 2/3 the length of the paper plate.
If you don't know how to draw a dinosaur head, tail, or spikes, look at pictures of cartoon dinosaurs online or in coloring books.
Use the brim to make the neck, if desired. Cut it off first so that you get a C-shape, then cut it in half. Use 1 of these halves to make the neck.
3. Glue the cut shapes to the other paper plate half. The straight edge of the plate is the bottom of the dinosaur, while the curved side is the back. Glue the tail to 1 end and the neck and/or head to the other. If you made spikes, glue them down the dinosaur's back.
4. Use scissors to cut an empty toilet paper roll into thirds. Keep 2 of the segments and discard the third. This will give you rings that are a little over 1 in (2.5 cm) tall. If you don't have any empty toilet paper rolls, you can use an empty paper towel roll instead.
If you're using an empty paper towel roll, cut 2 1 to 2 in (2.5 to 5.1 cm) segments from it.
5. Cut a set of slits into the top of each toilet paper ring. You will be sliding the dinosaur's body into these slits, so make sure that they are directly across from each other. The easiest way to do this would be to squish the rings in half, then cut a 1⁄2 in (1.3 cm) long slit into each one.
6. Slide the dinosaur into the slits. Take the first roll, and turn it so that 1 slit is facing the dinosaur's head and the other is facing its tail. Slide the bottom edge of the dinosaur's body into the slit. Repeat this process for the other leg.
Slide the legs apart until they are on opposite sides of the plate.
7. Paint the dinosaur, then let it dry. Acrylic craft paints will work great for this, but you can also use poster paint too! Use the same colors and patterns for both the front and back. How long it will take for the paint to dry depends on what you are using. Expect to wait about 15 to 20 minutes, however.
You can take the dinosaur's body off of its feet in order to paint it. Do the front first, let it dry, then do the back.
Don't forget to paint the eyes and mouth! Alternatively, you can glue on some googly eyes after the paint has dried.
Tips.
Your dinosaur doesn't have to look realistic at all. You can even make it pink and blue!
Look up pictures of cartoon dinosaurs. They have simpler shapes, which are easier to copy to your paper.
Things You'll Need.
White paper plate, Empty toilet paper roll, Scissors, Green acrylic paint or poster paint, Glue stick or white school glue.
If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.
Steps.
1. Locate all of the craft supplies that you own.
If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.
Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.
2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.
Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.
Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.
Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.
3. Sort out all of the supplies that you have into smaller groups.
Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.
Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,
4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.
Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.
If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.
Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.
5. Keep on sorting.
Sort a little bit whenever you start or finish a project or get new supplies.
Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.
6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.
Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.
For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.
7. Repeat this process with different containers until everything is filed away.
8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.
9. Finished.
Tips.
Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.
Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.
Put things where they'll be handy when you need them, and where you think you'll look for them.
Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.
Most importantly, find your own balance between creativity and control.
Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.
Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.
Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.
Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.
Things You'll Need.
Craft supplies.
Multiple containers depending on the amount of supplies.
