EASY CRAFTS IDEAS | Hasil penelusuran untuk 5 And Craft -->

ads

Menampilkan postingan yang diurutkan menurut relevansi untuk kueri 5 And Craft. Urutkan menurut tanggal Tampilkan semua postingan
Menampilkan postingan yang diurutkan menurut relevansi untuk kueri 5 And Craft. Urutkan menurut tanggal Tampilkan semua postingan


How to Organize a Craft Room.

A craft room is a place where you want to let your creative energies take over. Organizing your craft room will take some work but the end result is worth the effort. You will want to start by gathering and sorting all of your available craft supplies. Then, find places to store these items where they will be easy to grab and use in the midst of a project. Use organizing as an opportunity to display those items that inspire you as well.

Method 1 Sorting Your Craft Supplies.

1. Gather all of your craft items. Grab a basket and walk throughout your living space grabbing any and all craft supplies and tools. Carry them into your designated craft room and place everything in the middle of the floor. Once you think that you’ve gotten it all, go back through one more time just to be certain. Make sure to open all of your drawers and cabinets, as craft supplies can often ‘hide.’

Likewise, go through your craft room and identify any objects or items that do not belong there and move them out. They may need to go in a ‘staging area’ in another room, so that you can concentrate your energy on your craft area.

2. Sort your supplies out according to item type. Look over your supply pile and begin to build smaller piles based upon different categories of supplies. For example, put all of your wrapping paper together. All fabrics should go together initially. After these first piles are finished, you can go back through them and narrow them even further according to size and color. For example, put all of the red wrapping paper together.

At this point your room may be in controlled chaos, so be careful walking around or you may slip on one of your piles. For that reason, try to keep other people out of the room as well, at least during this stage.

To keep you from feeling overwhelmed, bring an egg timer into the room and set it for 15-minutes. When the timer goes off, take a 5-minute break. Then, re-set the timer and start again. This will keep you motivated to work at a steady pace without burning out.

3. Decide what to donate. As you sort, identify items that are worth donating. Perhaps you have multiples of some items or maybe leftover supplies from projects that you’ve completed and moved on from. Make sure that whatever you donate is safe for another user. For example, don’t donate rusty scissors or any cracked glass items.

Various charity organizations, schools, and libraries will gladly accept donations of craft supplies as long as they are in good condition. This is a great opportunity to share your interest in crafting with other people.

Depending on the amount of items that you have, some charities will actually come to your house and pick them up for you. This may be a good opportunity to do organize other areas of your home as well.

4. Create a trash pile and dispose of it. As you sort, identify items that need to be thrown away. This could be items that you no longer find useful, but that aren’t suitable for donation due to condition or quantity. You should also trash any supplies that are no good anymore, such as dried out glue or frayed ribbons. Ask yourself if you’ve used the item in the past year and if you haven’t odds are it needs to be thrown away or donated.

Take the trash out after you’ve finished sorting the main pile. If you wait you are likely to leave it there and it will become an eyesore and will slow your organizing progress.

5. Repeat this process every few weeks. As life goes on, many of your supplies will likely wander out of your craft space once more. To keep your area tidy and useful for you, go through a sorting and cleaning process fairly often, especially after completing a major project.

Also, devote at least ten minutes after you finish working in your craft room for picking up and storing items in their new proper places. Devoting even this small amount of time can make a major difference in the long-term appearance of your craft room.

Method 2 Implementing a Storage System.

1. Store similar items together. You’ll want to keep your supplies together in their sorted piles as you place them in their designated storage spots and containers. Extra-small items will need to be placed in extra-small containers and will probably be grouped together for storage and then usage.

Keep an eye out for items that may appear similar but that have slightly different functions. These situations may require that you divide up your storage system even further. For example, you’ll want to divide your fabric scissors from your paper scissors.

2. Use plastic bins. These are the number one storage option when organizing a craft room. They come in a wide variety of sizes and are easy to stack. They also fit well within a cube shelf. You can see inside the clear bins, making it easy to find an item that you are looking for.

Depending on how you arrange your bins, you will want to purchase ones that open on the top or via a front panel. Look for lids that snap on tightly to avoid spilling your supplies.

Bins are also especially useful when working with messy items such as paints. In addition, they contain fumes from paints as well.

Make sure to purchase extra bins, and to leave space in the ones that you currently use, for new supplies that you may purchase.

3. Arrange items by color. Store and display your craft supplies according to the color wheel. This will create a quick way for you to find an item that you need for a particular project. It will also lead to beautiful displays of items within the room itself. For example, if you have a bunch of balls of yarn, sort them according to color (reds next to orange tints, etc.) and place them in a wooden cube bookcase for quick access and visual appeal.

4. Repurpose materials as storage containers. Almost any container that is sturdy with a lid can be reused as storage in your craft room. Try to think creatively and find jars, buckets, etc. that you find visually appealing already. They will be even more attractive when holding your supplies.

Here are a few unique ideas. To house smaller items such as sequins, use little plastic pill storage boxes that you can get at a pharmacy or grocery store. For colored beads, place them in a spice rack by color for ease of access and beauty. Small tins or colored buckets make a great storage option for pens, pencils, and paintbrushes.

For a more industrial look, grab a magnetic knife holder from your kitchen, attach it to the wall of your craft room, and use it to display your sharp cutting devices and scissors. This works best when positioned close to your standing work area.

Look at crafting sites and blogs online or buy inspirational craft books/magazines in order to find additional design ideas that may suit your particular space and taste.

5. Label everything. This is especially important when storing items in plastic bins or opaque containers. As you put away every storage container, make sure that it has a clear and visible label that you can see from the center of your craft room. For example, the bin with tape should say, “Tape-clear.”

You can get as fancy as you’d like with the labels. Some people prefer to use a standard label maker while others print directly from online templates. You can even make your own labels by hand.

6. Install shelving. You want to get the most use out of all surfaces within your room, so don’t ignore the walls. Look around your craft room and consider adding shelves to many of the open spaces on the walls. Think creatively about shelving and use materials such as recycled bookcase shelves or even old metal signs repurposed as shelves.

Method 3 Organizing Your Space for Creative Inspiration.

1. Locate your work table for ease of access. Get a sturdy table that you’d feel comfortable working on and place it in the most convenient space in the room, usually right in the middle. You want to be able to access it from all sides. Consider adding a chair or stool, unless you plan to stand all of the time when crafting.

In addition to your main table, you may want another one placed against the wall that will almost act like a workbench. You can hang items on the wall next to it for quick grabbing access.

2. Keep your favorite supplies close by. The materials that you are using for a current project, or those that you consistently rely upon, should be placed close to your table workspace. For example, if you are a seamstress, do not hide your best pair of cutting shears in a labeled storage bin in the closet.

3. Emphasize the natural light when possible. If you have a choice of room, pick a room with ample light sources. This will help to save you from eye strain as you work on your projects. You can also supplement the light by adding interesting (and bright) lamps. Hanging lamps often work the quite well as they are out of the way.

4. Create an inspiration board. Pin up photos or drawings to a fabric-covered poster board. Or, hang a magnetic board on your wall and attach items to it. Clip or write down quotes that you like and attach them to the board. Let it keep growing until you feel the need to remove some items into storage. This can be a fairly chaotic, but inspirational space, in an another organized room.

To add even more visual appeal, use colorful and creative stick-pins to attach items to the board. You can even go with pieces of patterned tape too.

5. Decorate with beautiful craft items. If you love your yarn, don’t hide it, display it. As you sort out items at the start of this process, look for those supplies that you find particularly visually stunning or exciting. Try to create spaces out in the open to store these items. For example, lengths of ribbon can be stored and displayed by hanging a peg board on the wall.

6. Create more access by manipulating your space. Don’t be afraid to use every inch of your craft room for some storage, display, or work purpose. You can paint inspirational quotes on the ceiling and hang items from it too. You can go vertical up the walls and increase your reach by employing footstools. Typically neglected areas, such as the backs of doors, can be put to good use with hanging storage pouches.

Increase your visibility in closet spaces by removing the doors and replacing them with a rod and curtain. When you first enter your room, sweep aside the curtain and you’ve got instant access and visibility into this space.

Tips.

You might want to do an inventory as you sort and organize, in order to determine what supplies you need to reorder.

Warnings.

Think about design and utility, but also safety. If you will have kids in your craft room, watch how you display sharp tools, etc.
November 25, 2019


20 common embroidery mistakes


Every hobby has its learning curve, and embroidery is no exception. Avoiding mistakes can save you time, money and frustration.



Reviewing these top 20 common—and avoidable—embroidery mistakes, and you'll know what to avoid before starting your next embroidery project.



Not Reading the Instructions

Always read the instructions. Using the wrong thread or number of strands of embroidery floss is one of the most common errors that happens when you skip reading the instructions. With kits, this can lead to running out of thread before completing the project. It also may result in a different line thickness than intended.



Choosing the Wrong Embroidery Fabric

Most forms of surface embroidery require a firm fabric foundation, often with a thread count of 28 or higher. Using an embroidery fabric with a lower thread count can result in poorly-formed stitches, although you can add stabilizer to create a better surface. Counted Thread or Pulled Thread projects require a lower, looser thread count. This makes it easier to pull and remove threads and create lacy stitches.



Selecting the Wrong Size of Needle

Using an embroidery needle that is too large for the project can result in holes in the fabric where the needle and thread enter or exit.



Using a Sharp Needle Instead of a Ball-Point Needle

Use sharp needles when the needle and thread need to pierce the fabric, as in surface embroidery and crewel.



Starting and Ending a Thread With Knots

Although not the worst mistake ever, it's best to avoid knots in any type of embroidery project. Instead, start a new thread with ​a waste knot, away knot, or by weaving it into the back of previously worked stitches.



Selecting an Embroidery Thread of the Wrong Thickness

Generally, bold lines of embroidery require thicker embroidery threads and narrow lines require finer threads. Combine threads to make a thicker strand and separate floss into single strands or groups of strands for working thinner lines.



Using Craft Thread Rather Than Embroidery Thread

Inexpensive thread sold in packages as a “Craft Thread” (often 6-strand floss or #5 pearl cotton) are for craft projects such as friendship bracelets, macramé, or children’s crafts and not for embroidery.



Marking Your Fabric With a Regular Pen

It's best to use a water-soluble fabric marking pen, chalk pencil or fabric pencil to mark your embroidery design on your fabric.



Using Heat Transfer Pencils Instead of Water-Soluble Fabric Pencils

Transfer pencils and pens are great for making iron-on designs, but they are permanent.



Iron Transfers Are Fuzzy or Distorted

When using iron transfers (either that you purchased or made with a heat transfer pen), fuzzy markings result when you slide the iron back and forth on the pattern paper. Instead, press the iron on the back of the pattern paper just long enough to transfer the markings.



Not Using an Embroidery Hoop or Frame

Using an embroidery hoop, scroll frame, or stretcher bars keeps the fabric taut and makes it easier to work accurate, well-formed stitches.



Rolling Fabric on a Scroll Frame in the Wrong Direction

Roll fabric on the bars of a scroll frame with the wrong sides of the fabric rolled to the outside (facing you).



Not Removing the Hoop Before Storing

Always remove your embroidery hoop before putting away your embroidery for the day, and especially before storing it for any length of time.



Not Enough Floss or Embroidery Thread When Starting

Before you start stitching, make sure you have all the necessary embroidery threads on-hand.



Getting Your Project Dirty

Always wash your hands before working on your embroidery project and avoid snacking while you stitch.



Improper Cleaning or Laundering for the Thread or Fabric Type​​

If an item requires laundering, check the fiber content of the fabric and thread before washing.



Ironing a Finished Embroidery Piece and Smashing the Stitching

You work hard to create beautiful works of art with delicate and dimensional stitching.



Storing Needlework Fabrics and Finished Pieces Incorrectly

Needlework is an investment of both time and materials. Properly caring for and storing your pieces helps avoid staining and fiber breakage, ensuring you get a lifetime of use from your items.



Displaying Needlework in Direct Sunlight​​

Many fabrics and threads used in embroidery like to promise that they are fade-resistant.



Rushing to Fix a Mistake

If you make a mistake and find yourself picking out stitching, do this carefully and slowly.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019


easy kid craft


One of the #1 things that people often say to me is, “I would love to make creative projects with my kids, but I’m just not crafty. I don’t even know where to start!” My reply is always, “Trust me, you do NOT need to consider yourself ‘crafty’ to start getting creative with your children!”  There are hundreds upon hundreds of craft projects that you can make with your children that require NO special skills or tools and that take less than half an hour of your time. In fact, most of these 50+ quick and easy kids craft project ideas that I’ve rounded up here actually take less than FIFTEEN minutes to make!



WHY CRAFT WITH YOUR KIDS?

A recent study by Dr. Richard Rende revealed that creative interaction between parents and young children engaging in activities like arts and crafts not only provides immediate and lasting cognitive benefits but also creates a unique bonding experience, which creates lifelong memories. Taking time to be creative with your children is a topic that I am incredibly passionate about. I know firsthand the benefits that children reap when they are exposed to arts and crafts activities, and in an age where arts are in a decline in the school systems, it is even more important than ever for parents to take the initiative to introduce art activities to their children.



Other key findings of Dr. Rende’s study showed that:



• Arts and crafts engage multiple brain areas simultaneously and

improve bilateral coordination between the left and right sides of

the brain, leading to immediate and future cognitive development.



• Activities like arts and crafts accelerate the development of muscles

in the hands and fingers, improving fine motor skills that are

essential for school success in the earliest formal years.



• Face-to-face interaction in the early years is critical for optimal

social development.



• Arts and crafts promote rich social interactions that help develop

language skills and social cognitive abilities like understanding

emotions.



• Creative activities are a great way to bond with children and create

lasting memories.



Nearly 90% of the parents surveyed for the study said that they would like to spend more time creating arts and crafts with their children, but they didn’t know where to start or how to carve out the time needed.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019


How to Get Ideas for Crafts and Projects.

Crafters, makers and builders create beautiful items out of raw materials. If you are a crafter that is unable to think of your next project, there are many ways that you can get new ideas. Crafting is one of the most popular subjects of blogs, magazines, classes and more, and its popularity has only risen as the Internet has become an easy way to share methods, techniques and projects. Depending upon how you like to learn, you can choose the most comfortable option. Select your specific area of crafting and search for the newest crafting projects using these avenues. Read more to find out how to get ideas for crafts and projects.

Steps.

1. Join a quilting bee, knitting circle or scrap booking club. Monthly meetings give the opportunities for exchanging ideas, showing off projects and doing group projects.

This is also a great way to meet people with similar interests and form lasting friendships. Crafting often allows you to talk to other people and learn their stories. Many rural communities have quilt guilds, knitting bees and craft circles that stay intact for decades.

2. Take night classes. Most cities have a group that is devoted to community education and gives a catalog of classes at a small fee. These can include anything from jewelry making to scrap booking to wood working.

Search online for "Lifelong learning classes" in your town or "Community education." Most classes happen once or twice a week over a period of months and they teach you new skills and give you many ideas for projects.

3. Get a subscription to a do-it-yourself magazine. Depending upon your preferences, there are many options. Magazine subscriptions can be bought from a website, Amazon, or a magazine prescription service, and it is a good idea to look for the best offer.

Good options for crafters include Martha Stewart Living, Card Maker, This Old House, American Style, Creative Knitting, Do-It-Yourself, Ready Made, American Craft, Crafts and Hobbies, Quilter, Paper Crafts, Creative Woodwork and Crafts, Car Craft. Knit'N Style, Sew News and Creating Keepsakes.

You may want to go to a supermarket and buy a few issues of each of these magazines to decide which one would be the best monthly subscription.

4. Get involved with Blogger, WordPress and other blogging platforms. Once you have a profile you can subscribe to craft blogs and check back whenever you need a fresh idea.

You may hear of craft bloggers referred to as "choggers." Start by checking out popular blogs, such as Bakerella, Cuteable, Dollar Store Crafts, Not Martha and the Pearl Bee. There are thousands of blogs to choose from, and they may also provide an email newsletter.

5. Sign up for email newsletters from magazines like Real Simple, Better Homes and Gardens and Ready Made. They will send you weekly or monthly issues depending upon your preferences, filled with new ideas from their crafters-in-residence.

6. Inquire at local stores if they do classes. In order to drum up business, stores often provide classes for a small fee as long as you buy the materials. For instance, a knitting business may teach their patrons how to use a new set of knitting needles in order to sell more sets.

7. Go online and simply search for patterns or templates. If you are looking for children's crafts, this is the fastest and least expensive option. If you cannot afford patterns for quilting and knitting, there are a number of free online templates that you can find using an Internet search and a printer.


Things You'll Need.

Community craft circles.

Craft magazines.

Craft blogs.

Email newsletters.

Printer.
November 25, 2019


How to Make Bottle Penguins.

There are lots of ways to recycle plastic soda bottles, and turning them into adorable penguins is one of them. With a little bit of paint, time, and creativity, you can turn 2 plastic soda bottles into an adorable penguin. If you have a lot of plastic soda bottles then you can create an entire penguin family!

Part 1 Assembling the Base.

1. Find 2 plastic soda bottles. The large, 2-liter (67.2-oz) bottles will work the best for this, but you can use smaller soda bottles too. Look for the kind that have the 4 bumps on the bottom. These bumps will make the feet and the hat.

The color of the bottles does not matter. You will be painting it.

2. Remove the labels and wash the bottles. Peel the labels off first, then wash the bottles inside-out with soap and warm water. Be sure to remove all sticker residue. Dry the bottles with a towel.

Wipe the bottles down with rubbing alcohol as well. This will remove any oils that might keep the paint from sticking. Let the bottles dry; this should only take a few seconds.

3. Cut the bottles in half and recycle the top sections. A craft blade will work the best for this, but you can do it with a sharp pair of scissors too. Young children should be supervised during this step.

If the cut edge is jagged, cut it smoother with a pair of scissors.

For a smaller penguin, cut the bottom 2 to 3 inches (5.1 to 7.6 cm) off of the first bottle, and cut the second bottle in half. The shorter half will make the bottom.

4. Tuck 1 bottle inside the other to make a capsule. Turn the bottles so that the cut edges are facing one another. Slide the first bottle into the second bottle by about 1⁄2 to 1 inch (1.3 to 2.5 cm). If the bottles won't fit inside one another, cut a 1⁄2 to 1 in (1.3 to 2.5 cm) slit into 1 of the bottles first; place this edge on the inside.

Make sure that the 4 bumps on the top and bottom of the capsule line up.

5. Glue the bottles together, if desired. If the bottles are loose, glue them together with tacky glue or super glue. Pull the bottles apart, and paint the inside rim of 1 bottle with glue. Slide it over the other bottle.

Hot glue is not recommended because it is too bulky.

Alternatively, you can keep the bottles loose, and use the penguin as a gift box.

Part 2 Painting the Penguin.

1. Paint the entire capsule black, then let it dry. Take the capsule outside or into a well-ventilated area. Set it down on a sheet of newspaper, then coat it with black spray paint. Let the paint dry for 15 to 20 minutes, then turn the capsule over. Spray paint the bottom and let it dry completely.

Hold the can 8 to 10 inches (20 to 25 cm) from the capsule, and spray using a side-to-side motion.

If the paint is too thin, let it dry completely, then apply another coat of paint.

If you don't have spray paint, paint the capsule using black acrylic craft paint and a paintbrush.

2. Paint the penguin's face and belly white, then allow them to dry. Use a pointed paintbrush and white acrylic craft paint to outline the white face and belly of the penguin. Fill your outline in using a flat paintbrush. Let the paint dry, then add another layer if the first layer is too thin. Let the second layer dry too, if you added it.

Look at pictures of real or cartoon penguins to get ideas for the placement of the white parts.

Make sure that 2 of the bumps on the base of the capsule line up with the bottom of the penguin's belly. These are its feet!

If you are making a smaller penguin, use the shorter half to make the bottom.

3. Give the penguin a widow's peak, if desired. Use a pointed brush and black acrylic craft paint to draw a V-shape at the top of the penguin's white face. Fill the V-shape in with black paint so that it blends in with the body. For an even nicer finish, made the sides of the V-shape curved so that it looks like Mickey Mouse's widow's peak. Let the paint dry before moving on.

4. Paint 2 eyes and a beak using acrylic craft paint. Use a yellow upside-down triangle for the beak, and 2 black dots for the eyes. For a more realistic beak, paint a yellow or orange circle, then draw a horizontal black line going through the middle.

Look at pictures of cartoon penguins to get ideas.

You can also hot glue 2 buttons or 2 googly eyes for the eyes.

If you don't have yellow paint, cut a triangle out of yellow paper, and glue that on instead.

Part 3 Adding Optional Details.

1. Give your penguin character with lashes, eyebrows, and/or blush. You don't have to do any of these, but they can really give your penguin personality. Use a very thin brush for the lashes and/or eyebrows, or a paint pen. Use a larger pointed brush to apply pink paint for the blush.

If you want to give your penguin visible yellow feet, paint the 2 bumps in the front (under the white bellow) with yellow acrylic craft paint.

2. Paint the top half of the bottle to turn it into a hat. The 4 bumps on top of your penguin's head can easily turn into a hat. Paint a line around the penguin's head, just above the eyes, then fill in everything above that line. Use whatever color you want.

If you have a molded line just below the bumps, you can use that as a guide instead.

3. Let the hat dry, then add some details. You can make the hat look more hat-like by painting or drawing some stripes or spots onto it. Use a thin, pointed paintbrush and acrylic craft paint in a contrasting color to do this. Let the paint dry when you are done.

Use a paint pen for thin stripes or small dots.

4. Glue a pompom to the top of the hat, if desired. You can make the pompom yourself out of yarn, or you can buy it from the kids section of a craft store. Hot glue the pompom to the top of the hat, right between all 4 bumps.

Choose a pompom color that matches the designs on your hat. If you did not add designs, then use a contrasting color instead.

5. Tie ribbon around the neck to make a scarf. Find some ribbon that goes well with the hat. Wrap the ribbon around the penguin's neck, then cross the left end over the right end. Bring the left end up through the gap, then tighten it. This is just like starting to tie a pair of shoes!

Glue both ends of the ribbon to the penguin so that they stay down.

If you are turning this into a gift box, make sure that you keep the ribbon below the seam.

You can also cut a long, skinny strip out of felt, and use that instead of ribbon. Cut fringes into each end for additional charm.

Question : How do we make the eyes?
Answer : Cut out two small black circles, and two slightly larger yellow circles. Glue the black circles onto the yellow circles, and glue those onto the white face.

Question : We don't have to remove the bottle cap?
Answer : If you have removed the cap, you will have to tape or otherwise plug the hole on the top to "sculpt" the rounded top of the head on, so it is not recommended to remove the cap. However, taping or a cork replacement can be used.

Question : Can I use a plastic bottle?
Answer : Yes, but it may be hard to paint.

Tips.

If you want your penguin to have a pointy hat, discard 1 of the bottom halves and keep 1 of the top halves. Use the top half as the hat.

Use paintbrushes made from sable or taklon bristles. Do not use boar bristle, horsehair, or camelhair.

Spray the penguin with varnish or sealer, if desired. Do this after you finish painting, but before you add pompoms and scarves.

You can spray the capsule with paint primer first to help the paint stick better.

If you are worried about the paint chipping, spray the capsule with paint primer before you start painting.

Warnings.

Use low-temp hot glue guns to avoid blisters and burns. Do not use high-temp hot glue guns.

Things You'll Need.

2 plastic soda bottles, Craft blade, Black spray paint, Acrylic craft paint (white, yellow, and black).

Acrylic craft paint, 2 contrasting colors, Flat and pointed paintbrushes, Ribbon or felt, Pompom, Hot glue, Tacky glue or super glue.
Januari 23, 2020


how to frame a piece of fabric on canvas


Adding a beautiful piece of art to a room is the last layer of decoration that every home needs. But a framed piece can be pricey. Instead of shelling out money for a print or painting, why not frame a gorgeous piece of fabric instead? Not only will fabric add color and pattern to a room, but it also lends personality. Plus, varying the textures in a gallery wall will add interest and depth to the space.



You can use a favorite piece of fabric that has been passed down in your family or simply a pattern that caught your eye at the fabric store. Either way, it's a great way to display a beautiful textile. Hang one of these prints on your wall as soon as possible! This is an easy project that takes less than an hour to complete.



Gather Your Materials

Small canvas

Fabric

Scissors

Hot glue

Iron

Cloth tape (optional)

Choose Your Fabric

Once you've selected your fabric, make sure it's large enough to fit around your canvas. While you can opt to use a more traditional picture frame, the canvas is a really easy way to complete this project while still showing off the texture of the fabric.



Cut the fabric to the size of the canvas, leaving at least 1 inch of extra fabric around all of the edges.



Note: If the fabric is vintage or heirloom, you can leave it as is. Don't cut or glue and simply pin it to the canvas instead.



Smooth the Fabric

If needed, gently iron the fabric to remove any deep creases. Then, stretch the fabric over the canvas and secure it using dabs of hot glue on the back frame of the canvas. You want to pull the fabric taut, but not so much so that it's going to release and look saggy when you're done gluing.



Attach the Fabric

If the fabric is delicate and you don't want to cut and glue it, put pins at each end and each side to secure it. Just be sure to pull the fabric taut as you go, so you don't end up with any weird wrinkles. If you aren't emotionally attached to the fabric, follow these steps to finish off the back of the frame.



There will be excess fabric at the top and bottom of the canvas, so to handle it in a way that is both functional and aesthetically pleasing, you're going to want to fold and glue the fabric to the canvas in a similar way that you'd finish wrapping a present. It will look finished and pretty once you're done.



Find a Place for It

Place the canvas art wherever you'd like. Add it to the top of your bookshelf or hang it on the wall. If you easily grow tired of decor, the beauty of this project—if the fabric isn't an heirloom or vintage piece—is that you can simply rip it off the canvas and start over!



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019




How to Organize Craft Supplies.



If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.







Steps.



1. Locate all of the craft supplies that you own.

If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.

Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.



2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.

Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.

Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.

Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.



3. Sort out all of the supplies that you have into smaller groups.

Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.

Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,



4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.

Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.

If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.

Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.



5. Keep on sorting.

Sort a little bit whenever you start or finish a project or get new supplies.

Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.



6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.

Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.

For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.



7. Repeat this process with different containers until everything is filed away.



8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.



9. Finished.





Tips.

Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.

Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.

Put things where they'll be handy when you need them, and where you think you'll look for them.

Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.

Most importantly, find your own balance between creativity and control.

Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.

Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.

Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.

Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.



Things You'll Need.

Craft supplies.

Multiple containers depending on the amount of supplies.

Paper to label the containers.
November 21, 2019


learn how to rubber stamp on stretch canvas


If you are looking for different surfaces to stamp onto then how about trying artist's canvases. These are great for making decor for the home and canvas blocks are all the rage right now. This is a project for stampers happy to experiment with different techniques to create interesting results.



What Are Artist's Canvases?

Artist's canvases are typically pieces of linen or cotton canvas on which artists paint. There are two types which are commonly used, canvas board or panels, where the canvas is stretched over a piece of board. This gives a firm flat surface for stamping.



The other type is stretched canvas. These are pieces of canvas that are stretched over a wooden frame which creates a taut surface. Canvases of either type are available in a wide range of sizes, from tiny canvases through to canvases that take up an entire wall. There are a variety of different qualities of canvas available and art stores will have the biggest range on offer.



About the Surface for Stamping

The canvas surface is woven and as such it is more textured than normal cardstock. This is one of the features of the canvas which makes it a little different and interesting to work on. Note that this texture will mean that some detail in a very intricate stamped image may get lost. You will also notice that some canvases are sold as primed, others are not primed. A primed surface means that it has been treated ready for painting. Both surfaces can be stamped on, however, the inks will be absorbed by the surface of the untreated canvas and may need heat sealing on treated canvas. It is best to experiment with both types and see which gives you the results you prefer.



Where to Buy

You will find stretch canvases for sale in artists supply stores. You will also find them in craft stores and even some stationery stores as well as online.



How to Use

While you can stamp onto canvas panels with relative ease, stamping on stretch canvas presents some significant challenges, not least the fact that the canvas surface, while taut, has some movement and therefore it is difficult to stamp onto in the traditional manner. However you can achieve good results by placing the inked stamp, image side up and carefully pressing the canvas, top side down, onto the stamp. Then carefully rub over the back of the canvas to make sure the inked image is transferred from the stamp to the canvas. To use this method, your stamp must be smaller than the recess at the back of the stretch canvas.



Ink for Stamping

Unlike stamping on canvas or fabric which is going to be worn or may need regular laundry care, canvas panels are purely decorative, therefore there is no need to use fabric ink when you stamp on canvas panels. The type of ink you use depends on the results you want to achieve, however, good thick pigment inks are a great choice although they may need sealing with a heat gun. Permanent ink such as Stazon and Ranger Archival inks are also a great choice.



Mistakes

While artist's canvases are more expensive than normal paper or cardstock, you don't need to worry that all is lost if you make a mistake. If you make a mistake, simply get some white acrylic paint and paint over the image. Leave the paint to dry and when it is dry, start again!

Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019


How to Make Pom Pom Sheep.

Whether you're looking to make a cute Easter decoration or just a fun craft to do with your kids, a pom pom sheep fits the bill. It's easy to make your own pom pom with just some yarn and a piece of cardboard, so you can customize your sheep to look exactly the way you want. Add a simple head made of craft foam and googly eyes and pipe cleaner legs, and you have an adorable farm animal to decorate your home.

Part 1 Creating the Pom Pom.

1. Cut out a piece of cardboard. To make the pom pom for the sheep, you’ll need a cardboard rectangle to wrap your yarn around. For a large sheep, cut a piece that’s 3-inches by 5-inches (8-cm by 13-cm). For small sheep, cut a piece that’s 3-inches by 2-inches (8-cm by 5-cm).

You can adjust the size of the cardboard to customize the size of sheep if you prefer.

After you cut the cardboard, it’s a good idea to wrap it in packing tape. That will allow the yarn to slide off it more easily when you’re finished making the pom pom.

2. Wrap the yarn around the cardboard. For the pom pom, you need fluffy white, cream, brown, or black yarn. Instead of cutting the yarn to a certain length, remove an end from the ball or skein and begin wrapping it around the cardboard widthwise. For a large sheep, wrap the yarn around the cardboard 120 times. For a small sheep, wrap the yarn around the cardboard 75 to 80 times.

Use one hand to hold the end of the yarn in place as you wrap it side by side in a single layer on the cardboard. Once you’ve covered the cardboard, start creating a second layer over the first. Continue working until you’ve wrapped the yarn around the suggested number of times.

While white, cream, brown, or black yarn offers the most realistic sheep look, you can substitute your favorite color yarn, such as pink or blue.

3. Bend the cardboard to slide off the yarn. When you’ve completely wrapped the cardboard with the yarn, use your fingers to bend the cardboard slightly widthwise to contract it. That makes it easier to carefully slide the yarn from the card.

Be gentle as you pull the yarn from the cardboard and make sure to hold it together so it stays together.

4. Tie twine around the middle of the yarn bundle. Once you’ve freed the yarn from the cardboard, use a piece of twine to secure the bundle in the middle. Tie the yarn as tightly as you can to ensure that it stays together.

If you don’t have twine, you can substitute a piece of yarn. However, twine is stronger than yarn so it usually does a better job of holding the pom pom together.

5. Cut the loops of the yarn to form the pom pom. When the yarn is securely tied with the twine, use a pair of scissors to cut the loops. This will create the pom pom shape for your sheep.

After you cut the loops, you may need to trim some pieces to get the look that you want for your sheep.

Part 2 Making the Head and Legs.

1. Draw the shape of the sheep’s head on craft foam and cut it out. To make the sheep’s face, you’ll need a piece of black craft foam. Use a pencil or pen to draw the shape of the sheep’s head, complete with ears, on the foam as a guide. Next, carefully cut the head out with a pair of scissors.

If you’re not comfortable drawing the sheep’s head freehand, you can find templates online at various craft websites, such as Dad Can Do .

The proper size for sheep’s head will depend on how large your pom pom is. It should fit on one end of the pom pom.

If you used dark yarn for the pom pom, use white craft foam for the head.

You can use a craft knife to cut out the head if you prefer.

2. Stick googly eyes on the head. Once you’ve cut out the sheep’s head, select two googly eyes that will fit on it side by side. Apply your favorite type of craft glue to the back of the eyes, and press them onto the foam head.

You can find googly eyes in a variety of sizes at the craft store.

Make sure to let the glue dry for at least 5 minutes, so you can be sure the eyes won’t fall off when you begin to assemble the sheep.

3. Fold two black pipe cleaners in half. For the sheep’s legs, you’ll need two black pipe cleaners that are approximately 4- to 5-inches (10- to 13-cm) long. Bend the pipe cleaner in half to create a “V” shape.

Part 3 Assembling the Sheep.

1. Glue the head to the front of the sheep. Add a dab of glue to the back of the sheep’s head that you’ve made. Carefully press it onto your pom pom, and hold it for 30 to 60 seconds to ensure that it is secure.

You can use any type of glue to secure that works on fabric to secure the head to the pom pom. However, you may have an easier time if you use a hot glue gun.

2. Thread the pipe cleaner front legs through the pom pom. Take one of the bent black pipe cleaners and push it through the pom pom on one side near the front. Make sure that the pipe cleaner is threaded through the yarn pom pom so it is secure.

Some thread may come loose when you thread the pipe cleaner through. You can trim any errant strands.

3. Press the second pipe cleaner through the back of the pom pom. After you’ve secured the pipe cleaner for the front legs, push the second one through the pom pom near the back. Pull it through to the other side to create the second set of legs.

Take care with your placement of the second pipe cleaner. You want to ensure that it’s far enough back from the first to provide proper balance for the sheep to stand.

4. Adjust the pipe cleaners to allow the sheep to stand. Once both pipe cleaners are threaded through the pom pom, bend the four ends to create feet that help the sheep stand. You may need to adjust the length of the pipe cleaners on each side to ensure that the sheep is balanced properly.

Tips.

You can use the same technique to create a create a pom pom bunny and/or chick to serve as Easter decorations.

This is a kid-friendly activity, but be sure to supervise their use of scissors and the hot glue gun.

Things You’ll Need.

Cardboard.

A ball or skein of fluffy yarn in white, cream, black, or brown.

Scissors.

Twine.

Black craft foam.

Two googly eyes.

Two black pipe cleaners.




Desember 01, 2019


diy cat scratching post for your feline friends


DIY Cat Scratching Post

More often than not, cats can be found lounging in the sun or snoozing the day away. But don’t let them fool you—they love to play. Cats love climbing, chasing, and jumping just as much as any other pet.



But all the climbing and scratching can lead to wear and tear. Instead of sacrificing your beloved couch or armchair, find some enriching toys to give your feline to keep them happy and healthy. That way, everyone can live in peace.



While perusing the pet store shelves, you may notice that most toys, treats, and beds are lacking in style. For some reason, a lot of pet products are behind the curve when it comes to aesthetically pleasing design. With DIY, you can maintain your dream home’s modern decor while giving your pet everything you need.



This DIY scratching post is sure to please your furry friend. Plus, it will look great hanging on your wall! Say goodbye to boring beige cat furniture.



Gather Your Supplies

This DIY requires a few easy-to-find supplies. To make it even more budget-friendly, head to a second-hand store to find a frame. You can easily upcycle it at a low cost.



Here’s what you’ll need:



Small rug



Scissors



Measuring tape



11" x 14" picture frame





Measure and Cut Your Rug

You may not even have to head to the store to find the carpet material for this project. If you remodeled your home, you likely already have some leftover carpet in the garage.



But if not, you can find carpet samples at local carpet retailers. Or you can use an indoor/outdoor decorative rug (like the one we used), a door mat, or even a bath rug. Just be sure your material isn’t unraveled or damaged—that’s the cat’s job.



Before using your scissors to cut your carpet, use a measuring tape to measure the size of the picture frame. Then, use those measurements to cut a rectangular section of your carpet that will fit perfectly inside the picture frame. If the first try isn’t perfect, just keep trimming away.



Your regular pair of scissors will sometimes work for this, but it depends on the material you use. If it’s difficult to cut with scissors, try using sharp shears.



Secure in Frame

Once you have cut your material to match the size of your frame, it’s time to secure them together.



First, remove the sample photo and glass cover from your picture frame. These parts aren’t necessary and you can keep them for future crafts or recycle them if you have no use for them.



If your picture frame has a kickstand on the back, it may be necessary to remove it. This frame will be hung on the wall and a kickstand on the back may make it too bulky, causing it to stick out when it’s hung up.



Secure your piece of rug or carpet inside your picture frame. Be sure to apply the cardboard backing piece that came with the frame onto the back to make sure things stay in place.



Display

The moment we’ve all been waiting for is here! Now that your DIY is finished, you’ve got an adorable piece of wall decor that looks great and satisfies your kitty to no end. Every cat will appreciate this fun toy. And when it wears out, just replace the material inside to keeping things looking new.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019




How to Build a Ballista.



If you like medieval weaponry capable of flinging arrows through the air, try building your own ballista. A ballista consists of a frame, a launch ramp with a slide, and a tensioned string. You can build all of these components with popsicle sticks, thread, and other basic supplies. Add a launch pin to create a small ballista that enables you fire bolts with a pull of a string.







Part 1 Assembling the Frame.



Drill holes through a pair of 6 in (15 cm)-long popsicle sticks. Measure 1 in (2.5 cm) from the ends and mark the spots with a pencil. Before working on the sticks, lay down a piece of cardboard to protect your work surface from damage. Then, use a drill bit 1⁄4 in (0.64 cm) in diameter to create the holes.

The simplest way to create a ballista is with inexpensive popsicle sticks, available online, at craft supply store, and other areas.

If you wish to make a larger ballista, trying using larger pieces of wood or foam in place of the popsicle sticks.



Poke a second, smaller hole next to each of the bigger ones. Measure about 1⁄4 in (0.64 cm) along the stick’s length from one of the existing holes. Use a steel probe 1⁄16 in (0.16 cm) in diameter or a similar sharp tool to poke all the way through the wood. Position the hole so it’s slightly lower, closer to the edge of the stick, than the larger hole. Create a matching hole on the opposite end of the first stick and create corresponding holes on the second stick.

Each popsicle stick has 4 holes when you’re finished, a pair of holes on either end. The bigger holes are used to secure the ballista frame together, while the smaller holes are for the launcher.

To test the smaller holes, try squeezing a wood cocktail skewer through them. Get skewers about 7⁄64 in (0.28 cm) in diameter. Widen the holes as needed to fit the skewers.



Cut a pair of wood blocks to 1 1⁄2 in × 1 in (3.8 cm × 2.5 cm). The easiest way to do this is to purchase wood crafting blocks. If you can’t find the exact size you need, cut the blocks to size with a crafting knife or another tool. Get blocks that are about 1 in (2.5 cm) tall. Scrape away the excess wood until both blocks are the same size.

Shop online or visit a craft store to see what kind of wood blocks are available. You can use scrap wood if you wish, but crafting blocks are much smoother and easier to work with.

Be careful when using a crafting knife. The blocks are small, so it’s easy to slip while handling the blade. Work slowly to avoid potential accidents.

Image titled Build a Ballista Step 4

4

Glue the blocks to the ends of the popsicle sticks. Heat up a hot glue gun loaded with a fresh stick of white glue. Spread a layer of glue over the ends of the 1 of the sticks, then lay the blocks on top of that. Align the longer ends of each block with the edges of the popsicle stick. Spread another layer of glue on top of the wood blocks to secure the second popsicle stick.

Make sure you align the holes in the popsicle sticks before gluing them in place. The holes need to be positioned evenly over one another in order for the ballista launch its arrows later.







Part 2 Building and Attaching the Launch Ramp.



Cut about 1⁄2 in (1.3 cm) off the end of another popsicle stick. Trim this new stick to size by measuring and slicing it apart with your craft knife. Another safe way to do this is by snapping the end off with scissors or wire cutters. Trim any stray wood fibers off the cut end so it looks smooth and even.

Cutting popsicle sticks can be tricky since they are pretty fragile. Work slowly, gradually deepening the cut you make. Bend the popsicle stick back and forth along the groove you cut to prevent it from splintering.

If you have experience with wood cutting, try using a fine saw blade like a band saw. Always wear earmuffs, eye goggles, and a dust mask while operating a saw.



Trim a pair of cocktail skewers to 5 1⁄2 in (14 cm) in length. Get some wood skewers about 7⁄64 in (0.28 cm) in diameter. Measure and mark the skewers as needed with a ruler and pencil. Then, cut the skewers evenly on both ends to trim off the sharp points. The skewers need to be the same length as the popsicle stick you cut, so use it for comparison.

Wood skewers are available online in addition to some craft stores, general stores, and restaurant supply stores.

Cut the skewers by using a craft knife or by snapping the ends off with wire cutters.



Glue the skewers to the top of the popsicle stick. Place the skewers on the long edges of the popsicle stick you cut. Lay down a bead of glue from a hot glue gun to secure the skewers in place. Trim the ends of the skewers as needed to smooth them out and make them even with the ends of the stick.

Now you have a basic launch ramp. The skewers form a groove for you to load the ballista’s ammunition.



Secure the ramp to the center of the frame you built. Get your popsicle stick frame with the holes drilled in it. Turn the ramp over and spread some hot glue on the end of it. Then, secure it over the bottom popsicle stick in the frame. Put it as close to the center of the frame as possible, aligning the end of the ramp with the back edge of the frame.

Hot glue dries relatively quickly, so you don’t need to worry too much about the frame and ramp components coming apart. Set the pieces aside as needed for 10 to 20 minutes to give the glue a chance to solidify. It takes about 24 hours to fully cure.







Part 3 Creating the Launcher Mechanism.



Break a 4 1⁄2 in (11 cm) popsicle stick into halves. Divide the stick evenly into halves about 2 1⁄4 in (5.7 cm) long. These sticks are smaller than the frame pieces and are part of the ballista’s launching system. Use a craft knife or wire cutters to split the stick across its width and then smooth out the cut end.

Purchase a separate bag of smaller popsicle sticks online or at a craft store. Alternatively, cut smaller pieces of wood boards or foam if you’re making the ballista with those materials.



Poke a hole 1⁄2 in (1.3 cm) from the end of each stick. Use a 1⁄16 in (0.16 cm)-thick steel probe or a similar tool sold at craft stores. Make a single hole near the rounded end, leaving the cut end alone. Pierce all the way through the wood.



Pull pieces of string through the larger holes in the frame. Getting the string through the holes is tricky, so have a cocktail skewer nearby to push it through. Slide both ends of a string 7⁄64 in (0.28 cm) in diameter through the top hole, then through the respective hole in the bottom frame piece. Leave the string long enough to form small loops above and below the ballista frame.

Try using twine from a craft store for a strong material that isn’t likely to break when you’re having fun launching makeshift arrows.



Tie small skewers to the frame using the string loops. Cut a couple of wood skewers down to 1 1⁄2 in (3.8 cm) in length. Start with the top loop by placing a skewer inside of it and pulling the string tight. Then, tie the loose ends of the string into a knot with another skewer underneath it.

Lay the skewers flat against the frame pieces. Orient them so they’re perpendicular to the frame pieces. Then, tie the knots as tight as you can to hold the skewers in place.



Place the small popsicle sticks between the strings and tighten them. The popsicle sticks you cut earlier fit between the frame pieces. Slide about 1⁄2 in (1.3 cm) of the cut ends of the sticks between the ropes. Then, twist the bottom skewers clockwise to tighten the string as much as possible.

When the small sticks are positioned correctly, you can move them back and forth without them sliding out of place. This is necessary for moving the ballista’s launcher to let arrows fly a long way.



Slide another skewer into each of the inner holes on the frame. Cut 2 more skewers to 1 1⁄2 in (3.8 cm) in length to fit those holes. Make them look nice and even like the other skewers before fitting them through the frame. Make sure the skewers go all the way through the respective holes on the top and bottom frame pieces.

Protect the strings by tying the ends to the bottoms of these skewers, if possible. If you do this, the skewers maintain the string’s tension, leading to much more impressive launches!



Tie a length of string between the launcher’s stick arms. Set the ballista so the back end is in front of you. Thread the 7⁄64 in (0.28 cm)-thick string into the holes in the small popsicle sticks hanging from the ballista frame. Knot both ends of the string to secure it, then trim off the excess length.

The exact length of string you need to form the launcher depends on the material you used. Try threading the string through both holes before cutting it from the spool. Always cut it longer than you need so you can knot it tightly.







Part 4 Making the Slide and Supports.



Glue a block underneath the back end of the launch ramp. Get another 1.5 in × 1 in (3.8 cm × 2.5 cm) wood block. The block needs to be approximately the same width as the ramp in order to keep the ballista stable while you’re firing it. Set the ramp in the glue, aligning its back edge with the back end of the block.

Installing the block makes the ballista ramp slanted so it launches arrows higher into the air.



Cut grooves in a small block to create the ballista’s slider. Cut the grooves into a small piece of wood about 1.5 × 1 × 1⁄2 in (3.8 × 2.5 × 1.3 cm) in size. The launcher needs separate grooves in the front and back, both as thick as the string you used when tying the launcher arms together. Make the 2 grooves about 1⁄4 in (0.64 cm) from either end. Use a crafting knife to scrape away the wood, making the grooves circular and about half as deep as the block.

Try making the slider out of a wood peg bought online or a craft store. If you use scrap wood, make sure it is solid and smooth so you can slide it along the ramp.



Create a 1 1⁄2 in (3.8 cm) wood cap to fit on top of the slider. Simply cut a smaller popsicle stick to the exact length and width as the slider. Cut the cap into a rectangle with no rounded edges. When you’re ready to install it, put the launcher string into the slider’s front groove. Spread some hot glue, then press the cap onto the top of the slider.

Test the cap out by putting it on the slider before you add the glue. Check that it’s big enough to cover the slider and pin the string in place.



Drill 45-degree angle holes in a block of wood. This block needs to be about 2 × 1 1⁄2 × 1⁄2 in (5.1 × 3.8 × 1.3 cm) longer than the one on the back end of the ballista. Position the holes about 1 in (2.5 cm) from the smaller sides of the block. Use a drill bit approximately 1⁄4 in (0.64 cm) wide to drill diagonally towards the center of the block.

Drill all the way through the other side of the block. Keep the holes as even as possible to build a stable base for the ballista frame.



Fit wood dowels into the holes on the block. Use a pair of 1⁄4 in (0.64 cm)-thick dowels cut to about 4 in (10 cm) long. Slice them using a craft knife, wire cutters, or a saw if you have one. Then, put some hot glue on the ends of the dowels and push them as far into the holes as possible.

Look online or at a local craft supply store for the perfect dowels for your project.



Glue the block to the front side of the frame to stand the ballista up. Flip the block over and spread a thick bead of glue across its length. Lift up the front end of the ballista to stick the block to the bottom of the frame. After pressing the pieces firmly together, consider letting the glue dry for about 10 minutes.

If the block is wider than the frame, you could try whittling it down with a carving knife or craft knife. As long as your base is stable, doing this isn’t necessary, but it can make the ballista look a little neater.







Part 5 Completing the Firing Mechanism.



Glue long spacer pieces to the sides of the back block. Cut the spacer pieces so they are about 4 in × 1.5 in (10.2 cm × 3.8 cm) in size. Spread more hot glue, then press them against the block supporting the back end of the ramp. These parts are there to support the rest of the parts you need to add, so they don’t need to be pretty and can be longer than the block itself.

Make sure the spacer pieces stick out from underneath the ramp a little bit. The pieces that attach to them need to extend over the ramp or else you won’t be able to fire the ballista.



Cut 1 1⁄2 in (3.8 cm) off the ends of a large popsicle stick. Measure and mark the length you need to cut on one of the 6 in (15 cm)-long popsicle sticks. You need 2 of these pieces, so cut off both ends of the stick. Leave the rounded ends of the stick intact.

Cut the stick carefully with a craft knife, wire cutters, or saw. Work slowly to avoid splintering the wood and smooth out the edges as needed.



Make a hole about 1⁄2 in (1.3 cm) from the end of each piece. Create the holes by poking a 1⁄16 in (0.16 cm) steel probe or a similar sharp tool through the wood. Keep the holes along the center part of the wood. Make them as even as possible to ensure the ballista parts line up appropriately when you install them.



Glue the popsicle ends to the side pieces on the block. The sticks need to be near the tail end of the block. Also, position the sticks about 1⁄4 in (0.64 cm) up from the bottom edge of the block. Spread glue over the wood and press them onto the block to hold them in place.

Make sure the ends of the sticks extend over the ramp. The holes need to be about level with the top edge of the slider in order to string the launch rope through it.



Bend a metal rod to fit through the holes in the wood. Get a metal rod about 4 in (10 cm) long and about 1⁄16 in (0.16 cm) in width to fit through the holes. Pull the launcher piece back and thread the rod through its second groove and the holes in the sticks. Then, use pliers to bend one end of the rod back over itself. The rod forms a launch pin that stays in place until you're ready to use it.

Test the pin by attempting to move it. If it feels loose, bend the end back on itself more to keep the pin in place. Leave the other end of the pin alone so it can slide out of the hole.



Tie a string to the end of the launch pin. Cut some 7⁄64 in (0.28 cm)-thick string to complete the launching mechanism. Try trimming it to about 3 to 4 in (7.6 to 10.2 cm) in length. Knot the string a few times to the bent end of the launch pin to quickly pull it out when you wish to fire the ballista.

Keep the string at a comfortable length. If it is too long or short, you may have a hard time pulling out the pin in a quick, fluid motion.



Cut cocktail skewers to about 5 in (13 cm) for ammunition. Trim the pointed ends off of as many skewers as you wish to use. When you’re ready to use the ballista, put a single arrow on the chute after pulling the slide back. Yank the string to pull the metal pin out, causing the slide to spring forward, sending the arrow through the air.

Always cut the points off of the skewers to avoid accidents. Also, never shoot the arrows at others. They can hurt, especially from bigger launchers.







Tips.

Ballista arrows are reusable. Collect the arrows after you fire them to ensure you have a steady supply of ammunition.

Small ballista designs can be blown up to create big rigs capable of throwing arrows long distances. Many big ballistas use wood planks and thick rope like the kind available at hardware stores.



Warnings.

Firing a ballista can be dangerous. To be safe, clear an area outdoors and fire it when no one else is around.

If you choose to use a saw to cut components, follow proper safety procedures to avoid injuries. Always wear earmuffs, goggles, and a dust mask.



Things You’ll Need.

Ruler, Craft knife, Wire cutters or scissors.

6 in (15 cm)-long popsicle sticks, 4 1⁄2 in (11 cm) popsicle sticks.

1 1⁄2 in × 1 in (3.8 cm × 2.5 cm) wood blocks, 7⁄64 in (0.28 cm)-diameter wood skewers, 1⁄4 in (0.64 cm)-diameter wood dowels.

1⁄4 in (0.64 cm) drill bit, Drill.

1⁄16 in (0.16 cm) steel probe, Hot glue stick, Hot glue gun.

7⁄64 in (0.28 cm)-thick string, 1⁄16 in (0.16 cm)-diameter metal rod.
November 20, 2019

How to Make a Dinosaur Tail.

A dinosaur tail can be used in a Halloween costume or be a new accessory for a dress-up game. Best of all, this fun, brightly-colored tail only takes 1-2 hours to make. If you’re familiar with a sewing machine, you can stitch your dinosaur tail together. For a quicker assembly, you can use hot glue. It only takes a few pieces of fabric and some fiber stuffing to take your child’s imagination to the next level!

Method 1 Creating a No-Sew Dinosaur Tail.
1. Cut a series of triangles into a long strip of fabric. Snip out a line of connected triangles from the strip. The total length of the strip should be 24 inches (61 cm) by 2 inches (5.1 cm). When you’re done, the felt should look like a miniature mountain range. Set this aside for later.
This strip will become the spikes of the dinosaur tail, so feel free to pick a bright, fun color!
When flattened, the fabric will look like a row of diamonds. This will be fixed later on when the spikes are folded and glued together.
Use fabric scissors for a quicker and smoother cut.
2. Trace the edge of a bowl onto the main fabric and cut it out. Flip over a bowl and trace its circumference onto the felt. The diameter of the bowl will be the width of your dinosaur tail, so make sure that it’s wide enough.
3. Cut out 2 strips of fabric for the waist straps and glue them in place. Use fabric scissors to cut 24 inches (61 cm) by 2 inches (5.1 cm) rectangular strips from the tail fabric. Then, fold in the edges lengthwise and glue them into place. Fold the fabric in half again and glue both sides together so the straps are less than 1 inch (2.5 cm) thick.
4. Crease and glue the line of fabric spikes together. Use short lines of hot glue to connect the folded spikes. Instead of looking like a row of diamonds, the felt will now look like a row of triangles.
5. Cut a large, curved triangle out of fabric to make the base of the tail. Measure out a curved triangle along the edge of a folded piece of fabric. You don’t have to use specific measurements, but make sure that the tail will fit around your circular piece.
6. Attach the spikes to the inner seam of the tail with hot glue. Use small lines of hot glue to connect the felt spikes with the outer edge of the tail. Apply glue on both sides of the spikes, as this piece will hold the tail together. Put pressure on the glued areas with your fingertips to secure the spiked tail into place.
Use additional glue at the pointy end of the tail to provide extra support.
Add extra glue as needed to connect the rest of the tail together.
7. Put fiber stuffing into the tail until it’s fully stuffed. Take a bag of fiber filling and stuff the tail completely. Place as much or as little stuffing as you would like inside.
Make sure that the pointy end of the tail is completely filled before continuing to stuff the rest.
8. Glue the waist straps and circular piece to the inside of the tail’s base. Take the waist strips and glue them on opposite ends of one another, using small lines of hot glue. These straps should be perpendicular to the line of spikes. Make sure that the circular base is glued snugly over the waist straps and is covering the end of the tail.
You can tie the waist straps together to secure the tail when your child wears it.

Method 2 Cutting and Sewing a Tail Shape.
1. Fold the fabric in half and mark 12 inches (30 cm) above the crease. Take 1 yard (0.91 m) of fabric and fold it in half horizontally. Use a tape measure (preferably non-mechanical) and mark 12 inches (30 cm) above your starting point on the fold. This indicates the height of your dinosaur tail.
Make sure that your measuring tape expands to at least 3 feet (0.91 m).
2. Make a second mark 24 inches (61 cm) down the fabric. Measure 24 inches (61 cm) from your starting point and mark the fabric. This 24 inches (61 cm) distance will serve as the length of your dinosaur tail.
Make sure that you have enough fabric for these measurements.
3. Make a third mark 2 inches (5.1 cm) above the second mark. Take your measuring tape and make a dot 2 inches (5.1 cm) above the second mark. This third measurement represents the pointy, bottom end of the tail.
4. Connect the 3 marks with a marker and cut out the tail shape. Use a fabric marker to sketch the line that connects these three points before removing the piece with scissors or a rotary cutter. Rotary cutters can be found at most craft stores, and provide a more even and exact cut along the edge of your fabric.
If you want to make your lines exact, use these measurements to sketch and cut a template out of cardboard beforehand.
5. Trace a plate on fabric twice to create 2 circles for the tail’s base. Place a ceramic plate onto the fabric and cut around it with scissors or a rotary cutter. Repeat this process so that you have 2 circles. The diameter of this circle will be the width of your dinosaur tail.
Use folded fabric if you want to cut 2 circles out at once.
6. Measure and cut out 2 pieces of fabric to create the waist straps. Use a measuring tape to mark and cut out 2 strips of fabric. The length should be 12 inches (30 cm), and the width should be 4 inches (10 cm).
These strips will help attach the dinosaur to a child’s waist.

Method 3 Adding the Spikes and Waist Straps.
1. Sketch a series of triangles onto a piece of felt using a fabric marker. Use a ruler or measuring tape to sketch a row of triangles onto the felt. Make the triangles, which will be the tail spikes, about 2 inches (5.1 cm) tall and 2 inches (5.1 cm) wide. Ensure that there’s 0.5 inches (1.3 cm) between each spike.
You can make the spikes bigger or smaller, depending on how you want the tail to look at the end.
You can also make individual triangular spikes.
2. Arrange the cut spikes on the edge of the tail fabric and pin them in place. Use fabric scissors to cut the spikes out of the felt. Begin constructing your dinosaur tail by positioning the trail of spikes between the folds of the base tail fabric. Pin the spikes so that they face inward, as you will be sewing the fabric from the inside out.
3. Use a sewing machine to attach the spikes to the main fabric. Feed the fabric through the machine to stitch the base tail fabric and spikes together. Go along the curved shape of the tail, leaving less than a 0.5 inches (1.3 cm) of space between the stitches and the fabric’s edge.
Pinch and tug on the fabric on the inside of the tail to pull the tail right side out.
Remember to remove the pins from the fabric as you sew.
4. Fold and pin the waist strap fabric at the ends before sewing the edges together. Crease the fabric along the center so that the short ends are touching, and use a few pins to secure the fabric in this position. Stitch the edges together lengthwise, but leave the shorter end open. Pinch the fabric on the inside of the stitching to pull the straps right side out.
You’ll be stitching the shorter, unsewn ends of the waist straps into the base of the tail.
5. Stitch the Velcro rectangles to the straps and attach the waist straps to the tail. Take a small rectangle of Velcro and place it on the sewn end of the waist strap before stitching it into place with a sewing machine. Then, take the unstitched ends of the waist straps and pin them to the inside of the tail. Make sure that the straps are placed perpendicular to the spikes before sewing them into place. Check to see that the strap is long enough to wrap around a child’s waist. Pin the straps onto the tail and sew them into place.
You can purchase Velcro at a craft store.
You can also sew Velcro by hand.
6. Pin the base circles along the edges and stitch together. Take the 2 base circles and secure them with pins along the edges. Make sure that the circles are centered against one another before you sew them together.
Leave at least 1 inch (2.5 cm) of space to turn the circle right side out.
After sewing the edges together, pinch and tug at the inner fabric of the circle to make pull it right side out.
7. Fill the tail with stuffing until it has a firm shape. Take fiber filling and stuff the base of the tail. Use as much fiber as you need to completely fill the dinosaur tail.
You can buy fiber filling at a craft store. You may need more than one bag to fully stuff the tail.
8. Use a ladder stitch to close off the base and complete the tail. Tuck and fold the excess fabric into the tail before sewing it shut with a ladder stitch. This part can be completed by hand.
The ladder stitch helps all portions of stitching to look uniform.

Tips.
Iron your material beforehand to remove any wrinkles. Take an iron and apply heat to your fabric in long, even strokes. Loosely woven fabrics like cotton and linen are great options to make a dinosaur tail, or you can opt for satin if you want a shinier look. Check the care label on your fabric to ensure that it can be ironed before you proceed.
Things You’ll Need.
Creating a No-Sew Dinosaur Tail.
Fabric.
Felt.
Bowl.
Fabric marker.
Hot glue gun.
Hot glue sticks.
Scissors.
Cutting and Sewing a Tail Shape.
Fabric.
Measuring tape.
Fabric marker.
Scissors.
Rotary cutter (optional).
Plate.
Adding the Spikes and Waist Straps.
Felt.
Pins.
Sewing machine.
Scissors.
Small Velcro rectangles
Fiber stuffing.
Measuring tape.
Fabric marker.
Sewing needle.
Thread.
Maret 21, 2020


How to Make a Paper Dog.

There are several fun ways to create a paper dog, and luckily all of them require very few materials! Create a fun miniature dog that can stand on its own legs out of origami paper, or make a folded dog face with a playful expression. You could even make paper dog hand puppets to play with!

Method 1 Folding an Origami Dog.

1. Select a piece of origami paper for your dog. Depending on what you have available, choose either a 3 by 3 in (7.6 by 7.6 cm), 6 by 6 in (15 by 15 cm), or 10 by 10 in (25 by 25 cm) piece of paper. The bigger the sheet of paper, the bigger your dog will be. Brown, tan, or white are common dog colors, but don’t hesitate to choose something more unconventional for your origami creation.

If you don’t have origami paper, use something else that is thin and easy to fold, like newspaper, magazine pages, or even wrapping paper. Cut the substitute into the right dimensions so you have a perfectly square piece of paper.

2. Fold the square of paper in half to create a triangle. Take the top-left corner and fold it across so it meets the bottom-right corner, forming a triangle shape. Run your finger along the fold to create a crease.

Use the back of your nail or something hard, like the body of a pen, to make your crease lines more defined.

3. Open the square back up and fold it in half diagonally the other way. Unfold the paper so it is a square again. Make another triangle by folding the top-right corner across to the bottom-left corner. Press down along the fold line to make another crease.

It’s really important in origami to have straight, defined creases. That is what enables your creation to stand upright once you’ve finished.

4. Unfold the square again and place it in front of you. Open up the piece of paper and set it in front of you. Make the bottom of the square parallel to your body.

There should be an “X” formed by the creases on the unfolded piece of paper.

5. Bring the bottom-left corner to the center point of the square and fold. With the square unfolded in front of you, take the bottom-left corner and place its tip in the center of the square, where the 2 creases intersect to create an “X”. Press the fold down to make a crease.

Making firm creases will also keep the folded pieces of paper in place while you work on other sections. Otherwise, you might risk things coming undone and losing your place in your project.

6. Repeat the previous step to bring all the corners to the center. One at a time, take each remaining corner (top left, top right, bottom right) and fold them so their points are in the center of the square. Fold and press down the crease for each corner.

Essentially, this step turns the original square into a smaller square. All the sides should still be equal to one another.

You will now have left, top, right, and bottom sides, with all points meeting in the middle of the square.

7. Open the left flap, fold it in half, and then fold it back in place. Unfold the left-hand side piece of paper. Fold the point in half, so that the tip of it meets the intersection of your previous fold line. Then fold the entire left flap back into place.

There should be an open triangle when you look down at your square.

8. Take the tip of the right flap and fold it back to overlap the edge line. Leave the flap folded to the center point. Take the tip of the corner that is in the center, and fold it back about 2/3rds of the way. Make your crease so that the top forms a triangle that overhangs the outer edge of the square.

Leave the top and bottom flaps in place and don’t do anything to them at this point.

This fold will eventually become the dog’s tail.

9. Fold the entire square in half lengthwise. Pick up the piece of paper. Fold it in half evenly, lengthwise, to create the left and right sides of your origami dog. When the fold is done, set the paper down in front of you so that the pointy tail is pointing to the right.

Take your time when lining up the center fold. If the lines aren’t straight, your dog will be wobbly.

10. Unfold the top flap and crease it from the top-left to bottom-right corner. Unfold the flap of paper from the top section of the dog so that its point is pointing toward your body. Then fold the entire section of paper up, and create a diagonal fold that starts at the top-left corner and finishes at the bottom-right corner.

At this point in the folding process, you’re making the dog’s head and legs.

11. Refold the right edge along the crease line. After making the diagonal fold, take the point of the piece of paper you just folded up, and bring it back down along the original crease line. This creates the slant of the dog’s “leg.”

The bottom edge should be in line with the ground if you were to pretend to stand it up.

12. Repeat the previous 2 steps on the opposite side. Flip the piece of paper over. Unfold the flap of paper and make a diagonal fold from the top-right corner to the bottom-left corner. Then fold the paper back down along its original crease line to form the other leg.

Even though you’re nearing the end, remember to take your time and make your folds as straight and defined as you can.

13. Pull out the fold inside the dog’s “nose.” When you look at the piece of paper, you should now see the dog’s tail, body, triangle legs, and triangle head. Look under the dog’s nose and carefully pull out the fold. This creates the dog’s mouth and gives it a more realistic look.

The crease line creates a jawline for the dog.

14. Draw a nose and eyes onto the dog to complete it. Take a marker and put an eye on each side of the dog, as well as a nose. For the nose, just fill in the area around the front tip of the head. You could also draw a little smile or any other embellishments you feel are appropriate.

Once you get the hang of the pattern, you can make an origami dog in just a few minutes.

Method 2 Creating a Dog Head.

1. Choose a piece of origami paper for your project. Origami-specific paper comes in squares, which means it’s ready to use and you don’t need to cut it at all. The larger the piece of paper you choose, the bigger the dog head will be. Choose a color for your dog, whether that is brown, black, white, tan, or an unconventional color, like blue or green.

If you don’t have origami paper, cut a thin sheet of paper, like newspaper or wrapping paper, into a square.

2. Fold the top-left corner to the bottom-right corner to make a triangle. Match up the 2 corners so that the sides are equal. Press the fold down firmly to create a crease.

To help crease the paper, push the fold down with the back of your nail or with the body of a pen. The stronger the crease, the better definition your dog head will have.

3. Bring the 2 bottom corners together to make a smaller triangle. Leave your first fold in place. Bring the bottom points together and make another fold to form a smaller triangle.

Take your time when making your folds and line up the edges neatly.

4. Unfold the triangle once, and place it so the tip is pointing at your body. Undo the last fold you did so that just the large triangle is left. Position the paper so that the top of the triangle is pointing at you.

You’ll use the center crease as a guide for your future folds.

5. Make a diagonal fold on the right-hand side, starting at the center crease. Make a bigger fold for bigger dog ears or a smaller fold for smaller ears. Make the crease start at the center line and fold the right-side corner down at a diagonal angle.

Keep the fold lined up with the center crease to create a proportional face.

6. Repeat the previous step on the opposite side. Try your best to create the same angle so that your dog’s ears are the same size. Start the diagonal fold at the center-crease line.

When you look down at your paper, you should see a very angular-looking dog head.

7. Fold back the bottom and top points to create straight lines. Fold back the top tip of the dog’s head just enough so that there is a flat line connecting the 2 ears. Fold the bottom tip back to create a jaw line for the dog.

If you need to, use a little bit of glue or double-sided tape to secure the points to the back of the dog’s head.

8. Draw the rest of the dog’s features to complete your project. Use a black marker to draw eyes, a nose, and a mouth on the paper. You can get as detailed as you want to, but for basic features, make circles for eyes and an upside-down triangle for the nose. For the mouth, make a “J” attached to a backwards “J” coming out of the tip of the dog’s nose.

You can get as creative as you’d like with designing the dog’s face. Try making spots on the ears or giving it whiskers or a tongue.

Method 3 Making a Hand Puppet.

1. Fold a piece of paper lengthwise into 3 equal sections. Use a piece of construction paper or computer paper, or anything that comes close in size to 8.5 by 11 in (22 by 28 cm). This piece of paper will be the dog’s head, so use whatever color you’d like for that. White works well, but brown, black, or even an unconventional color, like red, would be fine.

Avoid using really thin paper for this craft. You’ll be sticking your hands into the folds, so it needs to be a little thicker to hold up.

2. Glue the last fold down with your glue stick. To help your craft stay together, apply some glue to the back of the last fold. Press it down so it adheres to the other side.

Glue sticks work great because they don’t take long to dry. If you don’t have a glue stick, try using double-sided tape.

3. Fold the paper in half so the “seam” is on the outside. Bring the short ends of the paper together, making a crease in the middle. Fold the paper so that the side you just glued is facing up.

If you accidentally fold it the wrong way the first time, that’s okay. Just unfold it and reverse the direction.

4. Fold the open edge to the bottom crease on each side. On each side of the paper, take the top edge and fold it back so it’s in line with the bottom, and make a crease. After you’ve done this on each side, hold up the paper and check that it makes an “M.”

The top and bottom sections are where you’ll place your fingers to make the puppet talk.

5. Cut out the dog’s ears and tongue and glue them into place. Use different colors of construction paper to cut out oblong shapes for the ears and tongue. Use your glue stick to attach them to the paper. Place the tongue inside the “mouth” and glue the ears on the top of the paper, one on each side of the head.

For example, if you used white paper for the dog’s head, use red paper for the tongue and black paper for the ears.

6.Draw on the eyes and nose to complete your puppet. Use a black marker to draw circles for eyes and an upside down triangle for the nose. You could even put 3 small dots on either side of the nose to make whiskers. Use your imagination and enjoy the decoration process!

To use the hand puppet, simply put your thumb in the bottom flap and your fingers in the top flap. When you open and close your hand, the dog’s mouth will open and close, too.

Tips

Take your time when creating a new craft! It can take a while to get the hang of things, but keep at it and you’ll be able to make various paper dogs in no time.

If you get a paper cut, rinse it off with warm water and mild soap, and put a bandaid around it to keep it clean.

Things You’ll Need.

Origami paper, Marker, Origami paper, Marker, Construction paper, marker, Scissors, Glue stick.


Desember 19, 2019