how to make dog yarn

How to Make Dog Yarn.

Dog fur has been used to make a soft and warm yarn, or Chiengora, throughout history. Much like other yarns, the process for making dog fur yarn involves harvesting the fibers, washing the fur, and spinning it into the yarn. Dogs with long fur undercoats are the best candidates for making dog yarn, and many groomers will donate their extra fur to you if you don’t have a dog of your own!

Part 1 Collecting Dog Fur.

1. Brush your dog in the spring, when they’re getting rid of their winter coat. Dogs tend to shed more during the springtime, which makes this a great time for harvesting fur. Use a brush or mitt along the dog’s back, sides, and soft, fluffy areas, and avoid areas like the legs and head. Discard any coarse hairs that you can see in the brush, since you won’t be using them.

Breeds like Samoyed, Siberian Husky, Malamute, Golden Retriever, Newfoundland, Collie, and Sheepdog are great for making dog yarn because they have fluffy undercoats with long fur.

2. Pull the fur out of the brush and place it in a cloth bag. Once you’ve picked out the coarse hairs, use your hand to carefully tug the fur out of the brush and transfer it to a bag. Leave the bag open to allow air circulation, preventing mold and mildew.

If you don’t have a cotton bag, you can use a pillowcase or even a cardboard box for collecting the fur.

Avoid using a plastic bag for collecting the fur since plastic can trap air and allow mold growth.

Don’t overfill the bag or push the fur down into the bag. Packing the fur too tightly can cause mold and mildew to form.

3. Make sure you have at least 4 oz (113 g) of fur. To make any type of yarn, you need a substantial amount of fur. After each collection, use a kitchen scale to weigh all of your yarn to see how much you have. If the fur is thin or short, you might need up to 12 oz (339 g) of fur to get the yarn started.

Keep your bags of fur in a place where your dog can’t get into them, since some dogs like to play with their own fur!

4. Add other types of fibers and fur to make a blended yarn. If you want to make yarn with a variety of textures, you can incorporate wool from a llama or alpaca, or you can harvest fur from different types of dogs. If you don’t have enough fur, or your pet’s fur is shorter than 2 inches (5.1 cm) long, you can use these different fibers to make a stronger, longer strand of yarn.

If your dog doesn’t produce a lot of fur, contact a groomer to see if you can use the excess fur from those dogs, or offer to brush a family member’s dog or a friend’s dog to gather additional fur.

The wool and fur might be a slightly different texture, but that’s okay. As long as you aren’t using coarse hair, the fibers can be blended together through a process called carding.

Part 2 Washing the Fur.

1. Mix warm water and soap in a large bowl. Drip 2-3 drops of gentle dish soap or pet shampoo into a bowl and turn on the warm water. Swish the water around with your hand to make sure it’s an even temperature, and scoop out any bubbles that raise over the top of the bowl.

Too many bubbles can make the fur difficult to rinse, but you do need soap to make the fur clean.

2. Submerge the fur in the water for 10 minutes. Gather the fur and push it down into the water until all of the fibers are completely immersed. Press down on the fur, but don’t tug or pull at it, as this can break the fibers of the fur. Leave the fur in the water to soak out the dirt and debris.

Try to keep the water at around the same temperature to prevent the fur from becoming matted, which is also called “felting.”

3. Remove the fur from the water and refill the bowl with warm water. Use your hand to scoop all of the fur out of the bowl and then dump out the water. Make the new water about the same temperature as the previous water, and make sure there are little to no bubbles in the water.

If there are bubbles in the water, dump the water down the drain and refill the bowl to rinse it.

4. Place the fur in the water and push it down to remove excess soap. Transfer the fur back into the bowl and push it down to squeeze out the soap and any additional debris. If the fur is very soapy, you may need to give it an extra rinse with fresh, warm water.

Avoid pulling or wringing the fur in the water, as this can break the fibers and cause the fur to become matted as it dries.

5. Spread the fur out in the sun to dry for 1-2 hours. Lay down a towel or a mesh screen and position the fur on top of it. Try to spread the fur out as much as possible without breaking it up into small pieces. If there’s wind, place a mesh screen or towel on top of the fur to hold it in place.

If it’s cloudy or rainy outside, leave the fur inside to dry in a well-ventilated area. It may take up to 4 hours for the fur to dry inside.

Part 3 Spinning the Yarn.

1. Card the fur using the same process that you would for wool. Using a pair of hand-carders, place the clean and dry fur in sections on one of the carders. Then, roll and pull the empty carder over the one with the fur in a downward motion 2-3 times to elongate the fur. Continue until the fur is soft and evenly blended,

If you’re blending another type of fiber with the fur, such as alpaca and wool, you can add it in this step by placing it on top of the dog fur in the carder before you begin blending. This will combine the fibers into longer pieces and make them easier to spin.

2. Remove the fur from the carder and roll it into a roll egg. Use your hands or a removal tool to reach underneath the fur on the carder and lift it off of the wires. Once all of the fur is completely off, place the blended fur on a flat surface and use your hands to roll the fur in one direction, forming a kind of tube or cylinder out of the fur.

This incorporates the fibers in different directions, making it easier to form yarn, especially when you’re using blended fibers from different sources, like wool and dog fur or different types of dog fur.

3. Use a drop spindle to easily make a long strand of yarn. Hook the end of your carded and rolled fur onto the end of the spindle and hold the fur in one of your hands. Then, spin the bottom of the spindle and draw the fibers out of the rolled ball of fur. This will create a long strand of yarn from the fur.

If your fibers are very short and you didn’t blend them with another type of fiber, you may find that they aren’t strong enough to hold the spindle up. In this case, you should try hand-spinning the fur to make your yarn.

4. Hand-spin the fur if you don’t have a spindle. Hold the fur in one of your hands, and pinch one end into a point. Then, using the opposite hand, begin twisting and slowly drawing the fur out of your hand. Keep twisting it to make it tight and dense until you have a long strand of yarn.

This method produces shorter, more dense strands of yarn that are good for hats and other small items.

5. Make cozy crafts out of your new dog fur yarn. Try your hand at knitting and crocheting with your new yarn. Dog yarn is soft and warm, and it easily repels water, so try making a hat or scarf with the yarn. You can even make a pair of socks or gloves to keep yourself warm!

If you have a lot of yarn from the fur, you can make a sweater or a blanket.

6. Store the yarn in a dry, well-ventilated area. Even when the yarn is made, the dog fur might still be susceptible to mold and mildew if it gets wet. When you aren’t using the bundles of yarn, keep them somewhere dry with good air circulation. If you have to put the yarn in a bag to store it, use a bag made of a breathable fabric, like cotton.

Try to keep the yarn out of reach of pets, since they may still be able to smell some of their own scent on the fibers and might want to play with the bundles of yarn!

Tips.

Avoid using clippings or overcoat hairs, which can be scratchy and uncomfortable to wear.

Warnings.

Keep in mind that some people are allergic to dogs and shouldn’t wear items that have been made from dog fur, even if it has been washed.

Things You'll Need.

Brush or mitt, Dog fur, Cotton bag, pillowcase, or box, Large bowl, Dish soap, Water, Towel or mesh screen.

Hand carders, Wool or alpaca (optional, for added length/strength), Drop spindle (optional).

Desember 12, 2019

how to make plastic spoon monsters

HOW TO MAKE PLASTIC SPOON MONSTERS.

Monsters and Halloween go hand in hand. They don’t always have to be scary though, like my monster bookmarks, which are pretty darn cute! All these plastic spoon monsters want to do is go trick or treating! So what do you say? Want to make some cute monsters of your very own?



MAKE FUN PLASTIC SPOON MONSTERS.

This easy craft for kids has Halloween written all over it… seriously. Did you see the trick or treat bags?? The kids can make these plastic spoon monsters and display them in a diorama, just poke the handles into some foam!



They can also double as puppets so kids can put on a Halloween puppet show. Either way, it’s a fun afternoon of make-believe!



You can decorate their faces however you like, though I am partial to the cyclops look. One eye, one eyebrow, and usually one fang!



I also think monsters with multiple eyes are super cute! I like making their eyes go in different directions.



Seriously, if one of these cute little guys walked up to you, you would totally take them trick or treating, right??



Ok, enough chatter. Let’s get on with it. Gather your supplies and get ready to make these cute plastic spoon monsters!



I made five plastic spoon monsters, but the instructions below are for just one. I chose five different colors and matched them all up. You can mix and match and do whatever you want! For paint, I used Americana in Bright Orange, Sour Apple, Bright Yellow, Lavender, and Red Alert.



SUPPLIES FOR ONE PLASTIC SPOON MONSTER.

Felt in color of your choice, cut into a 4″ x 3″ rectangle.

Pipe cleaner (same color as felt).

Plastic spoon.

Acrylic craft paint in black, white and color to match your felt.

Paintbrush.

Scissors.

Round sponge applicators (spouncers).

Hot glue gun.

For trick or treat bag.



1/3 gold pipe cleaner.

Paper bag cut into 2″ x 1.5″ rectangle.

Fine point black marker.



Paint the back of the spoon and halfway down the handle. Allow to dry and repeat for a second coat.



Use spouncers dipped in white and black paint to add eyes. Allow to dry completely.



I like the double-ended spouncers. There are two different sizes in one. Check your local craft store to see what they have.



Use the handle end of a paintbrush to add circles that are smaller than your spouncers.



Meanwhile, while the paint is drying, fold the felt rectangle in half lengthwise and cut a small slit 1/2-inch from the top.



Unfold felt and trim off excess above the slit. Be careful not to cut it too close.



Cut around the edges of the felt to create fun shapes for the monster costumes.



When the paint is completely dry, insert the handle of the spoon into the slit of the felt so that the handle ends up behind the felt. Use a dab of hot glue to secure the felt to the “neck” of the spoon monster.



For the next step, you will need to lift the felt and move it out of your way which is why the painted faces should be completely dry before you do this!



For the arms, fold a pipe cleaner in half and twist around the middle of the spoon handle. Stretch pipe cleaner arms to the left/right. Bring the felt back down and secure it to the spoon handle with hot glue.



Write “TRICK OR TREAT!” on the paper bag rectangle. Bend the gold piece of pipe cleaner in half and curve the bend to look like a bag handle. Hot glue the handle to the back of the treat bag.



Twist the end of one of the arms around the treat bag handle. Position the arms however you like!



I hope you had fun making these cute little monsters from plastic spoons! I have some other crafts you will probably enjoy like these plastic spoon bugs and these plastic spoon snowmen! And I told you I love to make monsters.

November 03, 2019

how to keep glitter from falling off

How to Keep Glitter from Falling Off.

If you’re a glitter lover, chances are you’ve run across crafts and body glitters that are susceptible to flaking off and leaving a glitzy, sparkly trail behind you. Luckily, there are a few different ways you can craft with and wear glitter so that it doesn’t fall off so easily. Try using Mod Podge to seal in the glitter in your crafting projects, or mix cosmetic-grade glitter with different beauty products to create your own body glitter.







Using Mod Podge for Crafts.



Add a layer of satin or gloss Mod Podge to your craft. Use a foam brush or paintbrush, depending on your craft, and lightly brush a thorough layer of Mod Podge onto the surface area of whatever you are looking to cover in glitter. Make sure the entire area is coated and that there are no bare spots.

You can even make your own Mod Podge at home to save money!

If you don’t have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time.

Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.



Dust, pour, or poof the glitter over the Mod Podged area. Depending on the kind of glitter you are using, you might apply it in a slightly different way. The main thing to remember is that you want to completely coat the Mod Podge in glitter and not leave any empty spaces.

You can also use a foam brush to spread on your glitter if you want a little more control over how much you use.

If you are looking for a high-glitter outcome, you can apply a second layer of Mod Podge and glitter immediately after the first one without waiting for it to dry first (it will take a little longer to dry after the second coat, then, but it will be highly glitterized).



Allow the glitter and Mod Podge to dry for 1-2 hours. Leave your newly glittered item alone for several hours or until it is dry to the touch. Try to leave it in a position so that the Mod Podge and glitter isn’t touching any other surface.

If you are adding glitter to multiple items, this is a great time to continue working on those projects while you’re waiting for others to dry.



Apply a top layer of Mod Podge to seal in the glitter. Once the first layer is dry to the touch, use your sponge or paint brush to add another thin layer of Mod Podge to your item. Use long, even strokes to reduce the appearance of brush lines. Make sure you cover the entire item and don’t leave any raw glitter poking through.

You could also use watered down school glue to create an opaque sealant for your crafting project.

The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.





Let your finished craft dry for 3-4 hours before you use it. Depending on how thickly you applied the Mod Podge, you may need to wait anywhere from 3-12 hours before you can safely use the item without potentially messing up the application. Always check the directions on the bottle for tips and guidelines.

If you have a dehumidifier, you can set your craft in front of it for a speedier drying time.

Never place your item directly in front of a heat source, like an electric heater or a hair dryer, as this may cause the Mod Podge to melt or change consistency so it doesn’t dry correctly.



Coat flaking items with sparkle Mod Podge to seal in the glitter. If you have an item that has glitter that is flaking off, you can apply pre-glitterized Mod Podge to add back some sparkle and lock in the remaining glitter. Simply use a sponge or paint brush to apply a thin, even coat of the sealant to the item, then let it fully dry before you use it again.

Make sure to work on a protected surface, like a counter covered in newspaper or paper towels.



Mix Mod Podge with your glitter of choice for a stronger glitter look. Pour some Mod Podge into a disposable cup or bowl and mix in as much glitter as you want to make your own glitter sealant. You can make the glitter as weak or as strong as you prefer. Then follow the instructions to apply the Mod Podge and let it dry.

You can also apply your glitter Mod Podge, another layer of glitter, and then top it off with the glitter Mod Podge again for even more glitter fun.









Wearing Body Glitter.



Combine body oil and loose glitter for an all-body glitter-wearing option. Instead of sprinkling loose body glitter on your arms and hoping it doesn’t fall off, combine body oil and loose glitter in a travel-sized shampoo container. Shake the container up really well, and then apply it to your arms, legs, chest, or face whenever you need an extra glitter boost.

While you could purchase body oils or lotions that already have glitter in them, it can be less expensive and more fun to do it yourself.



Put petroleum jelly on your skin and add body glitter for a sparkly look. Use a clean makeup or paint brush and apply an even layer of the petroleum jelly to the area you want to cover in glitter (like your collar bones, shoulders, or even your hairline). Then use another clean brush or your hand to gently press loose body glitter onto the jelly.

Visit a cosmetics store to buy body-specific glitter, which is usually a slightly different consistency than the glitter used for crafting.

If you don’t have petroleum jelly, you could also use hair gel as the sticky base for your body glitter.

Use this method in areas that aren’t going to come into frequent contact with other surfaces. For example, it probably wouldn’t work well on your legs if you are going to be sitting and standing and walking around often.



Mix hairspray and glitter to create glitter brow and hair gel. Spray hairspray into a dish, like a small cup or bowl (or even a disposable Dixie Cup), and add loose glitter. Mix it around with a toothpick or a spoolie brush, and then apply it carefully to your eyebrows or to select strands of your hair.

Do not use the glitter and hairspray mix on your eyelashes as it could irritate or infect them.



Wear vibrant lipstick and then add loose glitter for a shimmery lip look. Steer clear of sticky or glossy lipsticks and stick with a cream base to keep the glitter in place better. Put on a layer or two or lipstick, then use your fingers to gently press loose glitter into your lips.

With this trend, you’ll want to avoid pressing your lips together or eating or drinking anything too messy.



Create a glitter stamp from a makeup sponge and loose glitter. Cut a makeup sponge into a fun shape (like a heart or a star) and dip one side of it carefully into loose glitter. Spread a thin layer of petroleum jelly or hair gel on your body where you want the stamp, and then press the makeup sponge onto the jelly to transfer the glitter.

Your glitter stamp should stay on all day as long as it doesn’t brush up roughly against anything else.







Keeping Glitter on Clothes.



Use hairspray for a quick fix on your glitter clothing. Take your item of clothing outdoors or to a well ventilated area, and lay it down completely flat. Then spray a light coat of hairspray overtop of the glitter. Use unscented hairspray if you can. Allow the hairspray to dry completely before you wear the clothing item.

Hairspray is a great, quick fix, but overtime it doesn’t hold up, though you can reapply hairspray when you need to. Long-term, you just have to care for and store glittery clothes very carefully.



Affix glitter to your clothes with fabric glue. Lay out your item of clothing in a clean workspace, and apply the fabric glue in whatever patten you want. Then, carefully shake loose glitter overtop of the glue, coating it so that none of the glue is visible. Let the glue and glitter dry for several hours before picking up the item and shaking off the excess glitter.

You could even make a stamp out of a sponge and decorate your shirt that way (like stars all over a t-shirt), and then shake the glitter on top of the design.



Wash glittery clothes sparingly and let them air-dry. When you go to clean your clothes that have glitter on them, try to wash then only when they really need it. Use cold water and the delicate cycle in the washing machine, and don’t put them into the dryer. Instead, hang them up to air-dry.

You could even take your glittery clothes to a dry cleaner instead of washing them yourself.



When crafting with glitter, try working over a cooking tray. You’ll catch all the excess glitter that falls off and can easily return it to its container.

When making your own body glitter, try to use cosmetic grade glitter rather than crafting glitter.

Store your glittery clothes in plastic bags to protect them from rubbing up against other items in your closet (and to protect your other clothes from getting glitter all over them).





Things You’ll Need.

Crafting with Glitter and Mod Podge.

Mod Podge (satin, gloss, or glitter).

Foam brush or paintbrush.

Disposable cup or bowl.

Craft glitter.

Wearing Body Glitter.

Makeup or paint brush.

Petroleum jelly.

Hairspray.

Lipstick.

Makeup sponge.

Body oil.

Cup or bowl.

Cosmetic grade body glitter.

Keeping Glitter on Clothes.

Hairspray.

Fabric glue.

Plastic baggies.

November 08, 2019