how to make a paper penguin using an origami penguin

How to Make a Paper Penguin Using an Origami Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases. Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

9. Fold the top half over. With the reverse fold out of the way, you want to take the corner pointing right—just the top layer not both layers—and fold it back on itself. Fold it so that the flat side just above the corner lines up flush with the flat vertical line on the left side of the paper. Make a crease here, but do not unfold the flap. Leave it folded.

10. Turn the page over and make the same fold on the other side. You now want to turn the paper over completely and make the same fold you just made but from the other side. In other words, fold the other corner (the bottom layer from the previous step) over so that its upper edge is also flush with the same flat side of the page.

Especially if you're using a two-colored sheet of paper, this step will make more sense because the form of the penguin will start to become more apparent as the black side of the page will face outward on both sides. As the project continues to take shape, these will be the wings.

11. Turn the paper over again. To prepare for the next major fold, you will need to turn the whole paper over again. When you do, you want to orient the paper so that the really narrow point is pointing upward.

12. Fold the narrow point over to the left. With the paper oriented so that the long, narrow point face up, take that point and fold it over at a 45° angle so that the point now points to the left. You'll see how this fold starts to take shape as the penguin's beak. After making the crease in this fold, return the point to the upward position.

13. Reverse-fold along the crease you just made. This step requires you to make an outside reverse fold along the crease you made in the last step. An outside reverse fold is slightly different from the earlier reverse fold. To make the fold, unfold the paper along the black side slightly, and poke your finger from the white side at the fold you made in the last step. When the creases reverse direction, simply reform the fold so that the two black sides of the sheet are in contact again.

Once again, reverse folds can be a bit difficult to describe.

14. Fold the wing over. Though clearly visible now, the wings won't quite look perfect yet. Take the wing on the side facing up and fold it over so that the white side faces out. You'll fold it back so that the corner which was facing the bottom left now points to the right. Pull it back far enough so that it's just shy of where the little tail is at the bottom of the paper.[

15. Fold the wing back over on itself. Once you've made the crease from the previous step, fold the wing back over on itself so that the black side is once again facing up. Fold it so that the tip of the corner is just shy of touching the horizontal white edge at the bottom of the body.

16. Makes a rabbit's ear fold. To make the rabbit's ear fold, lift the portion of the wing you just folder and reverse the crease from the last step, but only at the bottom of the crease and only at the depth of roughly the tip of your finger. This will makes the bottom tip of the wing into a little flap though the flat edge will still be parallel to the rest of the wing.

17. Repeat steps 14-16 for the other wing. With one wing complete, you're ready to turn the page over and repeat the same steps to form the other wing. Simply use the same folds from steps 14-16 but on the other side.

18. Tuck in the points at the bottom. The bottom of the penguin will still have points sticking out in a slightly misshapen way. Fold each of these points toward the inside of the penguin to make a flat, horizontal bottom to the body. Once you tuck these flaps up, you have your penguin!

Desember 22, 2019

how to make a paper penguin

How to Make a Paper Penguin.

Whether as a crafts project for a small child or as an origami project for older people, there are plenty of ways to make a paper penguin that are fun for people of any age!

Steps.

1. Purchase origami paper. This method calls for just a single sheet of 6” x 6” origami paper. If you want a larger penguin, then you can easily go for 12” x 12” paper, but you'll have to multiply any directions containing measurements by two. If you want an even better looking penguin, buy paper that is white on one side and black on the other.

2. Fold diagonal creases along the middle. To start, you want to place the sheet of origami paper flat (with the white side facing up if you have paper with a black side as well). Then fold the paper in half diagonally so the bottom left corner is flush with the top right corner and make a crease. Unfold the paper and do the same with the opposite corners, and then unfold the page again.

When you unfold the sheet again, you will have creases forming a large X across the page.

3. Fold the lower left corner to the center. With the page flat again and the large creases making an X, you will then take the lower left corner of the paper and fold it so that the tip of the corner touches the center of the page. In other words, the corner edge will touch the center of the X made by the earlier creases.  Flatten the folded portion and make another crease, then open the sheet so it's flat again.

4. Fold the upper right corner to the crease you just made. You will now have the large X crease as well as a smaller diagonal crease in the lower left of the page. Take the top right corner of the page and fold it over so that it touches the lower left crease. Then open the page once more.

5. Turn the page over. For the next set of folds, you'll need to turn the page over. If you have two-colored paper, this means that the black side will now faces up. When you turn the paper over, orient it diagonally so that the current lower left corner now points up.

6. Fold the left corner to the right corner. With the paper in the new orientation, take the corner pointing left and fold the paper in half so that it's flush with the corner pointing right. There will already be a crease here from when you made this fold on the other side of the sheet, but you'll need to crease it in the opposite direction when you fold it over.

7. Fold the bottom corner over to the right. From the last step, the sheet will now look like a triangle with the side on the left forming a vertical line. Take the corner of the triangle that points down and fold it across at a 45° angle. Fold it so that the horizontal edge made at the top of the fold touches the lower crease already on this part of the page—not the middle crease but the one below it. Once you've made the crease from this fold, turn the flap back over so that you have the same triangle shape you started with.

8. Reverse-fold the corner along the crease you just made. A reverse fold is a bit more three-dimensional than the other folds you've made so far. In order to make the reverse fold, take the crease you just made and crease it in the opposite direction, but make the crease by folding and tucking the corner into the paper.

Januari 22, 2020

how to organize craft supplies

How to Organize Craft Supplies.

If you're crafty and like to make things, chances are the materials and supplies that go into your hobbies have stacked up over time, and not in a tidy way. Here's how to regain a bit of control and find what you need, when you need it.







Steps.



1. Locate all of the craft supplies that you own.

If something is basically already organized or put away, don't pull it out now. Start with the stuff that's in your way.

Go a bit at a time, especially if you have a lot of stuff. Spend fifteen minutes sorting, or just sort one bag, bin, or area.



2. Cull the excess. It can be hard to admit that a particular activity might have been a passing phase that you've outgrown, or that an unfinished project ought to remain so, but if you can reduce the amount of stuff you'll have less of it to organize and to have to cram in somewhere.

Go for the easy stuff first, to help yourself build momentum. Toss anything that's obvious: hopelessly tiny scraps, mostly empty packages, dried-up paints.

Remember, you decide what's worth keeping. At the same time, organizing only goes so far if there's too much stuff.

Be choosy about what you bring home from the craft store. Do you have a project in mind for this item? Do you have a place to put it? Do you really find it attractive or promising? Can you do the project? Anytime soon? Be realistic, and you'll save money, space, and time.



3. Sort out all of the supplies that you have into smaller groups.

Sort by item type. Put glue sticks, bottles, and jars into one pile. Put decorative stickers into a different pile. Put fancy paper into a pile of its own.

Better yet, sort by activity. Have one kit, bag, bin, or space for painting, one for paper crafts, one for yarn, knitting needles,



4. Choose where to store your supplies. Think about where and how you do crafts. If you have a craft area already, add drawers, bins, or shelves. If you knit in front of the TV, your organization may consist of a knitting basket or two with active projects that live by the sofa and a bin full of extra yarn and inactive supplies stashed away in a closet elsewhere.

Try a drawer organizer or even a fishing tackle box to corral many small items. Something with multiple smaller spaces helps separate little stuff.

If you have a lot of small items, like beads or buttons, giving each group its own small container or compartment that seals or closes tight can save spills.

Do you craft on the go? A tote bag or even a purse-sized craft kit might be just the right organization system for you. Keep a project at hand when you go out to make use of wait times.



5. Keep on sorting.

Sort a little bit whenever you start or finish a project or get new supplies.

Rearrange if you notice something isn't working. If it's not where you looked for it, put it back where you will look for it next time. If it's not handy and you use it often, put it back near the top or closer to where you work.



6. Arrange by size and shape so that things are visible and accessible. It's best if you don't have to empty an entire bin to get out one item.

Put the flat objects into the container first, standing up on one side if possible, and then place the non-flat objects on top of them or alongside. Put frequently used items near the top.

For materials, like paper or fabric, try a filing system that displays them. Stand them on edge in a bin or drawer so that you can sort through them and see at a glance what you have. Smaller pieces might be rolled and stood up in a basket or bin.



7. Repeat this process with different containers until everything is filed away.



8. Label with tape or paper what is in each container. Don't rely on sticky notes or anything else that could fall off too easily. For example, if a certain container holds glue, markers, and crayons, write that out and attach that to the container. This way, you will know what is in the container when you need to get something out of it in the future.



9. Finished.





Tips.

Buy plastic containers that are clear so that you can see through them and find supplies in them more easily.

Don't rush this process by stuffing your craft supplies into random containers to get it all over with. A small investment of time now will save time in the future.

Put things where they'll be handy when you need them, and where you think you'll look for them.

Try to get the plastic containers for a good price, but make sure they are really sturdy so you won't have to get new ones later on.

Most importantly, find your own balance between creativity and control.

Organization is whatever you want it to be. If you want your colored pencils out on display so you can grab them easily when inspiration strikes, put them in a big jar or cup wherever you like to draw.

Take the time to treat your supplies properly. Don't store brushes on their tips or leave them soaking in water. Close tightly any paints, ink, clay, and anything else that might dry out. Protect your fabric and yarn from moths and mice, but don't seal it so tightly that it becomes musty.

Don't panic if your craft area doesn't stay neatly organized. If you're using the stuff regularly, it may tend to wander around your work area and get left out. If you can, work in a back room, basement, or garage and simply close the door when people come, or deem the space your studio and let it be messy! A moderately cluttered work area could actually increase your creativity by bringing together unrelated things accidentally or by reminding you of what supplies you have available. Thus, take a casual attitude about neatening and organizing this aspect of your life. Tidy up when you feel like it, when you can't find anything, or when having the clutter around would get in your way.

Sort and organize in a way that makes the most sense to you. If you regularly use glue to affix yarn, store the glue with the yarn.



Things You'll Need.

Craft supplies.

Multiple containers depending on the amount of supplies.

Paper to label the containers.

November 21, 2019

how to make a jack in the box

How to Make a Jack in the Box.

A Jack in the Box is a fun toy that's been around for hundreds of years. While it may seem complex, a Jack in the Box actually works with very simple mechanics. Making your own can be a fun arts and crafts activity. With some cardboard, glue, magnets, a spring, and a few other parts, you can make your very own Jack in the Box.







Part 1 Constructing the Box.



Find a sturdy piece of cardboard. You'll need a thick and sturdy piece of cardboard for the box to support itself. The kind from a large packing box should work well.

You'll be cutting out 6 squares that are each 6" x 6" (15 cm x 15 cm), so your piece of cardboard will need to be at least 18" x 12" (45 cm x 30). If you can't find a piece that big, then several pieces will work fine too.



Draw six 6" X 6" (15 cm x 15 cm) boxes on the piece of cardboard. These six squares will form the walls, floor, and lid of your Jack in the Box. Use a ruler to measure and make sure your lines are straight.

Make sure you use a dark pen or marker. Otherwise, you may not be able to see your lines when you cut.



Cut out each box. Use a pair of sharp scissors or a box cutter. Carefully cut along the lines you drew so the cardboard squares are the right size. If you're using a box cutter, make sure the cardboard is placed on a solid surface.

Wear gloves during this step to prevent paper cuts or any injuries for the scissors or box cutter.



Glue 4 of the squares together, making a cube with no top or bottom. Hot glue is the best choice for this step. White glue won't be strong enough to keep the box together. This forms the outside structure of the box.

Glue the edges of the cardboard together to form the cube. If the glue doesn't seem to be making a strong seal, you can use strips of tape to secure the cube while the glue hardens.



Glue another square to the bottom of the cube. Line up the square perfectly with the rest of the cube or your box will be uneven. This will form the floor of the box.

Lay the square down flat and put glue around the edge. Then slowly lower the box onto the square, making sure the glue makes contact with all edges of the box.



Make a hinge with the final square. Don't glue the final square to the box, or your Jack in the Box won't open. Instead, rest the square on top of the box, making sure to line up all the sides. Then, use a strip of tape to fasten one side of the square to the box. This will form a simple hinge that allows your box to open.

Clear tape is the best choice here. Colored tape might throw off your designs when you decorate your box later on.







Part 2 Sealing the Box.



Find 2 small magnets. There are lots of ways you could make the seal for your box, but a simple method uses magnets. Start by finding 2 magnets. These should be square or circle and small, not more than 1 inch (2.5 cm) long.

Craft or hardware stores usually have small magnets that are meant to hold boxes or cabinets closed. Looking for these should give you a good start.

Remember to find out which sides of the magnets attract each other. Those are the two sides you'll line up when making your seal.



Glue one magnet to the bottom of the box's lid. This should be on the opposite side where you placed the tape. On the edge of the lid and in the center, glue the first magnet.



Glue another magnet directly under the first magnet. The next magnet should be placed on the inside wall of the box so the two magnets touch each other when the lid is closed. In this position, they will attract each other and keep the box sealed.

To find the right position for the second magnet, start by closing the box slowly. This way you'll be able to see where the magnet will rest when the box is sealed. The best place for the second magnet is right under that point, so the two magnets touch when the lid is closed.



Test out your seal. See if your seal is holding after you glue both magnets. Pull up slightly to see how tight the seal is. Flip the box upside down and see if it holds.







Part 3 Making the Spring Puppet.



Glue a compression spring to the bottom of the box. Draw a circle in the middle of the box's floor to see where you'll place the spring. Then put glue on the bottom of the spring and place it over the circle you drew. Hold the spring down for a few seconds to make sure the glue seals.

Compression springs come in lots of sizes. For this project, you'll want one that's slightly taller than the box, or about 7 inches (18 cm). Your local craft store should have plenty of options.

Test the seal by making sure the box stays closed when the spring is in place. If the box doesn't stay closed, your spring is too big or your seal is too loose.



Put a sock puppet on the spring. Your Jack in the Box needs a character to pop out! A sock puppet is perfect because it can fit snugly over the spring.

You could also draw and cut out a simple face from a piece of paper and glue it to the top of the spring for a simpler design.



Test your box. With all the pieces in place, it's time to make sure your box is working! Put it on a table and lift up the lid. Your puppet should pop out of the box when you do this.



Decorate your box. Now that your box is complete, you can decorate it however you want! Use markers to draw on its sides, glue sparkly paper over it, cover it with stickers--use your imagination!





Tips.

Remember to let all glue dry before you move on. Wait a few minutes after you glue pieces together to make sure the glue holds or your box could warp as you work.



Things You'll Need.

Cardboard.

Hot glue.

Scissors.

Ruler.

Clear tape.

Gloves.

Pen or marker.

Compression spring.

Magnets

November 18, 2019

how to make a dog out of mardi gras beads

How to Make a Dog out of Mardi Gras Beads.

After a good celebration, you might find yourself with a whole bunch of leftover plastic bead necklaces. This simple craft is a cute and easy way to make use of these beads. They are made just like balloon animals, by twisting the necklace into the right shape.

Method 1 Bead dog.

1. Find the two beads melted together to form the join on the bead necklace. Give this a tug to break it. Then snip off the two "bad" beads with the melted sides.

2. Cut a string of beads twelve beads long and another two beads long. These pieces will form the body and the ears.

3. Twist four beads together behind the second bead on the long string. This will make a little square. One bead should be sticking up. This is the tail of the dog.

4. Do the same thing to the other side of the long piece except that after you twist the beads, 2 beads should be sticking out for the head. You should have one bead in between the the two sets of little squares.

5. Wrap the two beads behind the first bead on end with the two beads sticking out. This will make the ears and completes the dog.

6. Finished.

Method 2 Mardi Gras bead poodle.

1. Cut four segments from the plastic bead necklace. Cut one segment with 4 beads and three segments with 2 beads.

2. Lay out the 4-bead segment. Pick up one of the smaller segments.

3. At the space between the tip of the 4-bead segment and the second bead in that same segment, pull the small segment up so that the small segment crosses in between the beads on both segments.

4. Tighten the ears. Do this by twisting them around once.

5. Repeat with the other 2-bead segments. Except, this time, pull the small segments down instead of up, so that the ears stick up. The the legs point will also down, so the dog can stand.

6. Completed. This now makes a fine poodle.

Question : Method 2 looks too cartoonish, so I cannot see the character of the poodle. Please help.

Answer : Because of the size of the beads, the final project is the equivalent of a stick figure drawing in method 2. Method 1 is a basic "dog." To make a larger animal, it requires the beads to be supported by a wire frame to give it a realistic shape. Floral wire holds well for this purpose. Use a stick figure design with the wire, then wrap the beads around the wire. Since it is larger, try using the necklace as is for a double strand of beads.

Tips.

There are lots of things that you can do with these dogs such as adding then to a key ring, using in crafts, gluing onto hair accessories or giving them away as party treats.

Warnings.

All beads can be a choking hazard. Make sure to keep them away from small children and pets.

Things You'll Need.

A plastic Mardi Gras bead necklace

Scissors

Januari 17, 2020