If you are looking for different surfaces to stamp onto then how about trying artist's canvases. These are great for making decor for the home and canvas blocks are all the rage right now. This is a project for stampers happy to experiment with different techniques to create interesting results.
What Are Artist's Canvases?
Artist's canvases are typically pieces of linen or cotton canvas on which artists paint. There are two types which are commonly used, canvas board or panels, where the canvas is stretched over a piece of board. This gives a firm flat surface for stamping.
The other type is stretched canvas. These are pieces of canvas that are stretched over a wooden frame which creates a taut surface. Canvases of either type are available in a wide range of sizes, from tiny canvases through to canvases that take up an entire wall. There are a variety of different qualities of canvas available and art stores will have the biggest range on offer.
About the Surface for Stamping
The canvas surface is woven and as such it is more textured than normal cardstock. This is one of the features of the canvas which makes it a little different and interesting to work on. Note that this texture will mean that some detail in a very intricate stamped image may get lost. You will also notice that some canvases are sold as primed, others are not primed. A primed surface means that it has been treated ready for painting. Both surfaces can be stamped on, however, the inks will be absorbed by the surface of the untreated canvas and may need heat sealing on treated canvas. It is best to experiment with both types and see which gives you the results you prefer.
Where to Buy
You will find stretch canvases for sale in artists supply stores. You will also find them in craft stores and even some stationery stores as well as online.
How to Use
While you can stamp onto canvas panels with relative ease, stamping on stretch canvas presents some significant challenges, not least the fact that the canvas surface, while taut, has some movement and therefore it is difficult to stamp onto in the traditional manner. However you can achieve good results by placing the inked stamp, image side up and carefully pressing the canvas, top side down, onto the stamp. Then carefully rub over the back of the canvas to make sure the inked image is transferred from the stamp to the canvas. To use this method, your stamp must be smaller than the recess at the back of the stretch canvas.
Ink for Stamping
Unlike stamping on canvas or fabric which is going to be worn or may need regular laundry care, canvas panels are purely decorative, therefore there is no need to use fabric ink when you stamp on canvas panels. The type of ink you use depends on the results you want to achieve, however, good thick pigment inks are a great choice although they may need sealing with a heat gun. Permanent ink such as Stazon and Ranger Archival inks are also a great choice.
Mistakes
While artist's canvases are more expensive than normal paper or cardstock, you don't need to worry that all is lost if you make a mistake. If you make a mistake, simply get some white acrylic paint and paint over the image. Leave the paint to dry and when it is dry, start again!
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
Adding a beautiful piece of art to a room is the last layer of decoration that every home needs. But a framed piece can be pricey. Instead of shelling out money for a print or painting, why not frame a gorgeous piece of fabric instead? Not only will fabric add color and pattern to a room, but it also lends personality. Plus, varying the textures in a gallery wall will add interest and depth to the space.
You can use a favorite piece of fabric that has been passed down in your family or simply a pattern that caught your eye at the fabric store. Either way, it's a great way to display a beautiful textile. Hang one of these prints on your wall as soon as possible! This is an easy project that takes less than an hour to complete.
Gather Your Materials
Small canvas
Fabric
Scissors
Hot glue
Iron
Cloth tape (optional)
Choose Your Fabric
Once you've selected your fabric, make sure it's large enough to fit around your canvas. While you can opt to use a more traditional picture frame, the canvas is a really easy way to complete this project while still showing off the texture of the fabric.
Cut the fabric to the size of the canvas, leaving at least 1 inch of extra fabric around all of the edges.
Note: If the fabric is vintage or heirloom, you can leave it as is. Don't cut or glue and simply pin it to the canvas instead.
Smooth the Fabric
If needed, gently iron the fabric to remove any deep creases. Then, stretch the fabric over the canvas and secure it using dabs of hot glue on the back frame of the canvas. You want to pull the fabric taut, but not so much so that it's going to release and look saggy when you're done gluing.
Attach the Fabric
If the fabric is delicate and you don't want to cut and glue it, put pins at each end and each side to secure it. Just be sure to pull the fabric taut as you go, so you don't end up with any weird wrinkles. If you aren't emotionally attached to the fabric, follow these steps to finish off the back of the frame.
There will be excess fabric at the top and bottom of the canvas, so to handle it in a way that is both functional and aesthetically pleasing, you're going to want to fold and glue the fabric to the canvas in a similar way that you'd finish wrapping a present. It will look finished and pretty once you're done.
Find a Place for It
Place the canvas art wherever you'd like. Add it to the top of your bookshelf or hang it on the wall. If you easily grow tired of decor, the beauty of this project—if the fabric isn't an heirloom or vintage piece—is that you can simply rip it off the canvas and start over!
Visit us https://easycraftsideasforthehome.blogspot.com/
Note :
Acknowledgements
This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.
There are lots of ways to recycle plastic soda bottles, and turning them into adorable penguins is one of them. With a little bit of paint, time, and creativity, you can turn 2 plastic soda bottles into an adorable penguin. If you have a lot of plastic soda bottles then you can create an entire penguin family!
Part 1 Assembling the Base.
1. Find 2 plastic soda bottles. The large, 2-liter (67.2-oz) bottles will work the best for this, but you can use smaller soda bottles too. Look for the kind that have the 4 bumps on the bottom. These bumps will make the feet and the hat.
The color of the bottles does not matter. You will be painting it.
2. Remove the labels and wash the bottles. Peel the labels off first, then wash the bottles inside-out with soap and warm water. Be sure to remove all sticker residue. Dry the bottles with a towel.
Wipe the bottles down with rubbing alcohol as well. This will remove any oils that might keep the paint from sticking. Let the bottles dry; this should only take a few seconds.
3. Cut the bottles in half and recycle the top sections. A craft blade will work the best for this, but you can do it with a sharp pair of scissors too. Young children should be supervised during this step.
If the cut edge is jagged, cut it smoother with a pair of scissors.
For a smaller penguin, cut the bottom 2 to 3 inches (5.1 to 7.6 cm) off of the first bottle, and cut the second bottle in half. The shorter half will make the bottom.
4. Tuck 1 bottle inside the other to make a capsule. Turn the bottles so that the cut edges are facing one another. Slide the first bottle into the second bottle by about 1⁄2 to 1 inch (1.3 to 2.5 cm). If the bottles won't fit inside one another, cut a 1⁄2 to 1 in (1.3 to 2.5 cm) slit into 1 of the bottles first; place this edge on the inside.
Make sure that the 4 bumps on the top and bottom of the capsule line up.
5. Glue the bottles together, if desired. If the bottles are loose, glue them together with tacky glue or super glue. Pull the bottles apart, and paint the inside rim of 1 bottle with glue. Slide it over the other bottle.
Hot glue is not recommended because it is too bulky.
Alternatively, you can keep the bottles loose, and use the penguin as a gift box.
Part 2 Painting the Penguin.
1. Paint the entire capsule black, then let it dry. Take the capsule outside or into a well-ventilated area. Set it down on a sheet of newspaper, then coat it with black spray paint. Let the paint dry for 15 to 20 minutes, then turn the capsule over. Spray paint the bottom and let it dry completely.
Hold the can 8 to 10 inches (20 to 25 cm) from the capsule, and spray using a side-to-side motion.
If the paint is too thin, let it dry completely, then apply another coat of paint.
If you don't have spray paint, paint the capsule using black acrylic craft paint and a paintbrush.
2. Paint the penguin's face and belly white, then allow them to dry. Use a pointed paintbrush and white acrylic craft paint to outline the white face and belly of the penguin. Fill your outline in using a flat paintbrush. Let the paint dry, then add another layer if the first layer is too thin. Let the second layer dry too, if you added it.
Look at pictures of real or cartoon penguins to get ideas for the placement of the white parts.
Make sure that 2 of the bumps on the base of the capsule line up with the bottom of the penguin's belly. These are its feet!
If you are making a smaller penguin, use the shorter half to make the bottom.
3. Give the penguin a widow's peak, if desired. Use a pointed brush and black acrylic craft paint to draw a V-shape at the top of the penguin's white face. Fill the V-shape in with black paint so that it blends in with the body. For an even nicer finish, made the sides of the V-shape curved so that it looks like Mickey Mouse's widow's peak. Let the paint dry before moving on.
4. Paint 2 eyes and a beak using acrylic craft paint. Use a yellow upside-down triangle for the beak, and 2 black dots for the eyes. For a more realistic beak, paint a yellow or orange circle, then draw a horizontal black line going through the middle.
Look at pictures of cartoon penguins to get ideas.
You can also hot glue 2 buttons or 2 googly eyes for the eyes.
If you don't have yellow paint, cut a triangle out of yellow paper, and glue that on instead.
Part 3 Adding Optional Details.
1. Give your penguin character with lashes, eyebrows, and/or blush. You don't have to do any of these, but they can really give your penguin personality. Use a very thin brush for the lashes and/or eyebrows, or a paint pen. Use a larger pointed brush to apply pink paint for the blush.
If you want to give your penguin visible yellow feet, paint the 2 bumps in the front (under the white bellow) with yellow acrylic craft paint.
2. Paint the top half of the bottle to turn it into a hat. The 4 bumps on top of your penguin's head can easily turn into a hat. Paint a line around the penguin's head, just above the eyes, then fill in everything above that line. Use whatever color you want.
If you have a molded line just below the bumps, you can use that as a guide instead.
3. Let the hat dry, then add some details. You can make the hat look more hat-like by painting or drawing some stripes or spots onto it. Use a thin, pointed paintbrush and acrylic craft paint in a contrasting color to do this. Let the paint dry when you are done.
Use a paint pen for thin stripes or small dots.
4. Glue a pompom to the top of the hat, if desired. You can make the pompom yourself out of yarn, or you can buy it from the kids section of a craft store. Hot glue the pompom to the top of the hat, right between all 4 bumps.
Choose a pompom color that matches the designs on your hat. If you did not add designs, then use a contrasting color instead.
5. Tie ribbon around the neck to make a scarf. Find some ribbon that goes well with the hat. Wrap the ribbon around the penguin's neck, then cross the left end over the right end. Bring the left end up through the gap, then tighten it. This is just like starting to tie a pair of shoes!
Glue both ends of the ribbon to the penguin so that they stay down.
If you are turning this into a gift box, make sure that you keep the ribbon below the seam.
You can also cut a long, skinny strip out of felt, and use that instead of ribbon. Cut fringes into each end for additional charm.
Question : How do we make the eyes?
Answer : Cut out two small black circles, and two slightly larger yellow circles. Glue the black circles onto the yellow circles, and glue those onto the white face.
Question : We don't have to remove the bottle cap?
Answer : If you have removed the cap, you will have to tape or otherwise plug the hole on the top to "sculpt" the rounded top of the head on, so it is not recommended to remove the cap. However, taping or a cork replacement can be used.
Question : Can I use a plastic bottle?
Answer : Yes, but it may be hard to paint.
Tips.
If you want your penguin to have a pointy hat, discard 1 of the bottom halves and keep 1 of the top halves. Use the top half as the hat.
Use paintbrushes made from sable or taklon bristles. Do not use boar bristle, horsehair, or camelhair.
Spray the penguin with varnish or sealer, if desired. Do this after you finish painting, but before you add pompoms and scarves.
You can spray the capsule with paint primer first to help the paint stick better.
If you are worried about the paint chipping, spray the capsule with paint primer before you start painting.
Warnings.
Use low-temp hot glue guns to avoid blisters and burns. Do not use high-temp hot glue guns.
Things You'll Need.
2 plastic soda bottles, Craft blade, Black spray paint, Acrylic craft paint (white, yellow, and black).
Acrylic craft paint, 2 contrasting colors, Flat and pointed paintbrushes, Ribbon or felt, Pompom, Hot glue, Tacky glue or super glue.
Bird houses can be as plain or as ornate as houses for people, but, as a subject for an art work, they are a lot less intimidating. While we enjoy seeing and thinking about homes for birds, we might live where it is impractical to install an actual bird house. The solution is to paint a picture of bird houses. Because of its simplicity, this project is virtually fail proof, even for a non-artist. So, go ahead, tackle architecture, but begin on a bird's scale.
Steps.
1. Cut a rectangle of 140 lb. cold pressed watercolor paper and draw a pencil line 2" (5cm) up from the bottom edge to create a base for the houses to stand on. Later, you can paint this to represent a limb of a tree or a platform.
2. Draw a simple house starting with a square 3½ in (10cm) on a side, in pencil to represent the body of the house. To construct a slanted roof, the center point (1¾", 5cm) and draw a line upward a few inches. Close the roof by dropping two lines from the center point to each side of the house.
3. Alternatively, trace a miniature wooden birdhouse purchased from the craft or discount store. Simply place the house on your paper, back down and draw around it in pencil.
4. Repeat drawing houses until you have four in a row. Allow a slight space between them. Arrange them according to your taste, varying sizes and shapes.
5. Add details to each house such as entry holes for the birds, a picket fence, shingles, siding, or anything you wish. Go to the internet to look for ideas.
6. Embellish the houses with vines, flowers, leafs, beds, berries, tree branches, etc. Use the vines as a device to intertwine and connect the houses and it will lead the viewer's eye through the composition.
7. Put a bird or two in the picture. Draw one from your imagination or go online for pictures of birds. Put them standing still or in motion, flying into the picture.
8. Prepare your watercolors by adding water to each pad if you are using pan paints. If you are using tube paints, set up your palette with primary, secondary and neutral colors. Remember to leave the center part of the palette open for mixing colors.
9. Set out brushes, a ½" (1cm) flat for big areas, and some pointed ones in various sizes.
10. Begin painting by pulling a color for the body of the house, diluting it with clear water and making a puddle large enough to cover the area you wish to fill.
Repeat the process with a different color for each house.
Paint the houses, the area beneath the houses, and the sky.
Allow the paper to dry before attempting to paint over it or the colors will run into one another. Use a hairdryer to hasten the process, if desired.
11. When dry, paint the greenery, flowers, birds, sun and any other touches you can think of.
How to Make a Tweeting Bird in a Cage from Plastic Straws.
Tips.Try a technique called negative painting for a white object, such as a picket fence or a daisy. You simply paint around the object, keeping the white paper as your white color. Use a small, pointed brush and dip from the puddle on your palette that is the color the flower or fence is standing against.
Dry the paint before attempting to add a new layer.
If tiny hairs get in the paint from the brush, allow the area to dry and brush the hairs away. If you try to pick them off with your fingers, you will mar your wash and leave finger marks.
