EASY CRAFTS IDEAS | Hasil penelusuran untuk Arts And Crafts You Can Do With Paper -->

ads

Menampilkan postingan yang diurutkan menurut relevansi untuk kueri Arts And Crafts You Can Do With Paper. Urutkan menurut tanggal Tampilkan semua postingan
Menampilkan postingan yang diurutkan menurut relevansi untuk kueri Arts And Crafts You Can Do With Paper. Urutkan menurut tanggal Tampilkan semua postingan




How to Paint Wood Crafts.



Many arts and craft stores sell blank wooden pieces that you can paint. While you can always paint them right away, there are a few steps that you can take to ensure a neater, longer-lasting finish. Sanding the piece first will get rid of any ridges, while priming it will help the paint stick on better. Adding a coat of sealer will protect all your hard work, and help it last for years to come.





Prepping the Wood.



Sand the surface of the object with 140 to 180-grit sandpaper. You can do this with a sanding sponge or with a piece of sandpaper; a sanding sponge will work the best on curved surfaces, however. Also, make sure that you are sanding with the grain of the wood, not across it.

Some wooden pieces from craft stores come pre-sanded. If the surface area is completely smooth, skip this step.



Wipe the dust away with a tack cloth. A tack cloth is a special, sticky cloth intended for this purpose. You may find it alongside the sandpaper in the craft store or in the hardware store. If you can't find a tack cloth anywhere, try a damp cloth instead.

It would be a good idea to do this, even if you didn't sand your piece; items bought from stores are sometimes dusty, which can prevent the primer and paint from sticking.



Apply a coat of primer. You can use the brush-on kind or the spray-on kind. This will seal the wood surface, and help it take the paint better. It will also help the paint show up better, especially if you are using a light color.

Prime the front and sides first, let them dry, then prime the back.

Image titled Paint Wood Crafts Step 4



Allow the primer to dry before moving on. For an even smoother finish, you can sand the first coat of primer, wipe it clean, then apply more primer over it. Do this a few more times until there no ridges remain.







Painting and Sealing the Wood.



Pour a dollop of acrylic paint onto a palette. Choose a color for the background, then pour out a small amount onto a palette. Acrylic paint dries quickly, so don't pour out your other colors just yet. You can use the cheap, craft-grade acrylic paint that comes in bottles, or you can use the more-expensive artist's grade that comes in tubes. If you are using the artist's grade, dilute it with a few drops of water until it has the consistency of cream first.

You can use small dishes, plastic lids, and paper plates as palettes.



Apply a coat of paint over your piece. Use a foam brush or a wide, flat paintbrush to apply the paint. Let the paint dry, then apply a second coat, if needed. Let this second coat dry as well. Do the front and sides first, let them dry to the touch, then do the back.

Look for brushes made from taklon, katakana, or sable. Avoid camel hair brushes or stiff, bristle brushes.

Don't overload the brush with paint. The paint should come no more than halfway up the bristles.



Let the paint dry, then add a second coat, if needed. How long this takes depends on the brand that you are using. Most types of acrylic paint will dry in about 20 minutes, however. If the paint is too thin, add another coat of paint, and let it dry as well.

Take this time to clean your brush(s) with water. Do not let the paint dry on the brushes.



Add your designs and details. You can use stencils or trace designs onto the wooden piece. You can also free-hand the designs as well. Apply the base color first, let it dry, then add the details. For example, if you wanted to paint a smiley face, you'd paint the yellow circle first, let it dry, then add the smile and eyes.

Dip the brush in water often to keep the paint wet, even if you are using one color.

If you are working with multiple colors, keep a cup of water nearby. Rinse the brush with water before switching to a new color.



Let the paint dry completely. Refer to the label on you tube of paint for exact drying times. Just because something feels dry to the touch does not mean that it is ready to handle or take on sealer. Every brand will be different, but you can expect this to take about 24 hours.



Apply 1 to 2 coats of sealer. Sealers come in many different finishes, including matte, glossy, and satin; choose one that you like the best. Apply a thin coat of spray-on or brush-on sealer, then let it dry. Apply a second coat, if needed, and let that one dry too.

If you are using the brush-on kind, apply it using a wide, foam brush.

If you are using a spray-on varnish, be sure to work in a well-ventilated area.







Trying Other Techniques.



Skip the priming if you want to paint a design over bare wood. Instead, consider painting over the entire piece using a wood stain or a sealer. Wait for the stain or sealer to dry, then paint your designs onto the wood. Be sure to seal everything after the paint dries.



Add designs using stencils. Buy or make a stencil, then place it over the wood. Paint over the stencil using decoupage glue; this will seal the wood and prevent the paint from leaking under the stencil. Let the decoupage dry, then paint over the stencil. Peel the stencil away while the paint is still damp. Seal the wood using a spray-on or brush-on sealer.

You can make stencils using contact paper or self-adhesive vinyl.

You can use this method over bare, unsealed wood.



Use graphite paper to trace designs, then fill them in. Place a sheet of graphite paper over your piece of wood, graphite-side-down. Draw your design, then lift the paper away. Go over the outline using a thin, painted brush, then fill the design in using a flat brush. This method works best over painted wood. You can do it over bare wood, but the paint may not stick as well.

If you don't know how to draw, print the design out on tracing paper first, then place the tracing paper on top of the graphite paper.

If you are working over a dark-colored surface, make some chalk graphite paper instead: cover the back of a piece of paper with chalk, place it chalk-side-down onto the wood, then trace your design.



Create a tinted stain to show off the wood grain. Apply a thin layer of acrylic paint using a dry paintbrush. Dip a wet cloth in a small amount of paint, then rub it over the wood. This will help blend strokes together without covering up the wood grain.

The cloth should be wet, but not dripping.

Alternatively, you can paint over the entire piece using watered down acrylics or watercolor paints.



Make a DIY chalkboard. Paint the surface of the wood with 2 to 3 coats of chalkboard paint. Let the paint dry, then paint designs using normal paint onto it, if desired. Allow the chalkboard paint dry and cure completely. Cover the board with chalk, then wipe the chalk off.

Keep the designs on the edges of the wooden piece so that you can use the surface as a chalkboard.

You do not need to prime a DIY chalkboard, but sanding it would not be a bad idea.





Tips.

You can spray paint the wood first, then paint more intricate designs using acrylic paint.

Remember to prime, paint, and seal the bottom of your piece as well!

It is better to apply several thin coats of paint, primer, and sealer rather than one or two thick coats.

You get what you pay for when it comes to brushes. For the smoothest finish, consider investing in a high-quality brush.

Let the paint and sealer cure for 3 weeks before handling the piece. If you must handle the piece sooner, do so gently and with great care.

Choose your paint colors carefully. Acrylic paint typically dries 1 to 2 shades darker.

Use small, round, pointy brushes for precision and details, and wide, flat brushes for curves and backgrounds.

You don't absolutely have to prime the wood, but it is highly recommended. You can skip this step for a simple, kid's craft project, however.



Warnings.

Wear a dust mask over your face while sanding the wood for added protection.

Always using spray paint or spray-able primers/sealers outside or in a well-ventilated area.



Things You'll.

Wooden object (ie: frame, box, letter, toy car, etc).

140 to 180-grit sandpaper

Primer.

Acrylic paint.

Paintbrushes.

Sealer.


November 10, 2019


How to Make Furry Cat Ears.


Cat ears are cute accessories that can be easily made. You can wear them with a costume, or as a fun accessory with an outfit. All of the materials needed to make the cat ears can be found at most arts and crafts stores. To make furry cat ears, create the ear bases, put the ears together, and complete the cat ears with the help of an elastic band and hot glue.



Part 1 Creating the Cat Ear Base.

1. Draw the cat ears on paper. This will be the template for the wire. Basically, you just need to draw two wide triangles. You might like to try drawing a few different sizes to see which size looks best on your head. You can cut out the template, or leave the cat ears drawn on the paper. Keep this design as your template for the remaining steps.

Keep in mind that the template will be slightly smaller than the finished ears because of the fur. A template of about three inches is a good size to use.

It doesn’t matter what you use to draw the ears, but pencil is good to use if you will be redrawing the ears multiple times.

2. Create the cat ears with jewelry wire. Following the paper template, bend the wire into the shape of the cat ears. Jewelry wire should be fairly easy to bend, but you can use a pair of long nose pliers to help form the shape. Do this for both ears and you should end up with two triangle shaped ears.

If you don't have wire, you can use paperclips. Just straighten them out and use them as wire. Don't worry if they don't make a perfect triangle. It won't matter when you put them in the fur. Use glue to bind the sides until you put them in.

Use a jewelry wire that is thicker so that it won’t fall out of shape when fur is added to them. 16 or 18 gauge is a good choice because it is thick, but can be bent without too much effort by using pliers.

3. Cut out the fake fur. Following the paper templates again, cut out four triangle shapes in fur. You can use any type of fur that appeals to you, like black, leopard print, or lion-like fur. Fur can be purchased at an arts and crafts store. These should be about a half an inch larger than the template, though, as the fur needs to hold the wire triangles inside once stitched up.

Remember that you can always make it smaller if it's too big, but you can't make it bigger if it's too small.



Part 2 Putting Together the Ears.

1. Sew the fur together. Place two fur pieces together. The fur sides should be facing each other. Sew each side, but leave the bottom edge unsewn. That is the part you are going to insert the wire through to shape the ears. The finished product should be inside out. Repeat this step until you have two ears.

There should be very little seam allowance—only about an ¼ of a inch.

Use a color of thread that best matches the color of fur.

2. Flip the ears so that you can see the fur. The ears should be inside out with the fur parts facing each other once you have finished sewing. Now, turn the ears so that the fur is on the outside. The ear shape should be really obvious now. Inspect the ears to make sure that there aren’t any holes or mistakes.

Turn the ears inside out and sew up any holes that you find.

Use a pair of sewing scissors to cut the thread where any mistakes have been made. Remove the thread from that part and sew it back up with new thread.

3. Place the wire triangle pieces inside each ear. Insert the wire you shaped into triangles earlier into the furry ears. The wire should be able to fit snugly inside of the fur without too much or too little room. Adjust the wire if necessary.

4. Sew up the bottom of the ears. Once you have inserted the wires into the furry ears, sew up the bottom portion that is still open. There shouldn’t be any opening on the ears when you have finished sewing. It doesn't matter if this sewing line is messy, as nobody is going to see it.



Part 3 Completing the Furry Cat Ears.

1. Create the band for the ears. Measure the elastic band or ribbon around your head. The ribbon should cross over the top of your head rather than your forehead. You can find a band or ribbon at most arts and crafts stores. Sew or hot glue the ends together to form a circular headband that fits your head. If you’re using a ribbon, you can also choose to tie the ribbon in the back so that it is adjustable.

If sewing, include a seam allowance in your measurements before cutting the ribbon. Tie the ribbon when testing it on your head to see how much ribbon will be needed in total.

You can also choose to use a headband instead of an elastic band or ribbon.

2. Mark the placement for the ears. First, hold the band and ears together to see where the ears look most natural. Then, check in the mirror to see where the ears look best. Making marks on the headband while it is on your head, use a pen or marker to make marks where the ears will be covering.

It may be easier to have someone help you make the marks while the band is on your head.

3. Attach the ears to the headband. Use hot glue to attach the cat ears onto the headband in the positions that you marked. Use just enough so that the ears stay up, but don’t use so much that the glue gets on other places on the headband or ribbon. Allow at least ten minutes for the glue to dry.

Have someone help you with the hot glue if you aren’t comfortable with using it on your own.

4. Check the finished product. Once the glue has dried, try on the ears. The band should fit your head without sliding. The ears should be standing straight up. Make any adjustments as needed.



Question : What if I don't have any wire, or my parents won't let me use any?

 Answer : Depending on the size of your cat ears and the thickness of the fur, you might not even need any wire to make them stand up; the wire is there for support. If the ears still flop over after you have made them, try filling them with some cardboard or craft foam instead.

 Question : Is there any alternative to the fur if I don't have a lot of money and can't buy felt or fur and don't have a cat?

 Answer : If you own any old stuffed animals that you don't care for anymore, you can use the fluff from those.

 Question : Can I use white fur?

Answer : Absolutely.

Question : What do I do if I don't know how to sew?

Answer : You can always ask a friend or family member. If you're feeling ambitious, you can learn how to sew yourself.

Question : Can I use real cat hair?

 Answer : Yes, if you want, but it may be best to pick the cat's fur off of the cat brush, not the cat itself.

Question : How can I make fake fur?

 Answer : You can make the fur by tearing felt to make fluffy strips. Then, get the same color felt, and glue or sew the fluffy stripes onto it and then cut out the triangle shape for the ears.

Question : How can I make wolf ears the same way?

 Answer : Make the shape a bit taller and more pointy. Look at pictures of wolves for reference on how their ears are shaped and then just change the shape.

Question : Could I put pink felt in the center for the finished ear?

 Answer : Yes. Just sew or glue it on with a color similar to the color of the felt.

Question : Where can I get fake fur?

 Answer : A craft store or someplace that sells fabric. Or you could remove some from a stuffed animal.

Question : Can I make non-fluffy ears?

 Answer : Yes, but you may need to expand on your ideas, especially if you are looking to cosplay with them. You could use polymer clay.



Tips.

Fake or fun fur makes a mess when cut. Have something ready to sweep or vacuum it up.

Warnings.

Use care when handling hot glue, as it can easily burn.

Things You'll Need.

Paper for template.

Scissors.

Thin wire for the ears.

Fake fur (20 cm sq. or 7.9 inches.).

Elastic ribbon (5-6 cm or about 1 or 2 inches wide) Make sure you have enough to fit around your head and extra ribbon left for tying.

Hot glue.

Needle.

Thread.

Paper.

Marking tool.

Scissors.
Februari 12, 2020


How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small), 1 sheet white typing paper, A few sheets of crumpled newspaper.

Scissors, Hot glue or craft glue, Popcorn or other small snack foods (optional), Various decorating supplies (optional).


Desember 14, 2019


How to Make a Paper Bag Turkey.

Looking for a fun way to celebrate this holiday season? Whether you’re crafting homemade decorations for Thanksgiving dinner or just want to get into the spirit of autumn, making a turkey from ordinary paper bags is a quick, simple and creative activity that is sure to please children and adults alike. This project only requires a few simple materials and will add a bit of thrifty Fall flair wherever it’s displayed.

Part 1 Making the Turkey.

1. Gather your materials. For this project, you’ll need only need a handful of basic items—3 brown paper bags (1 large paper grocery bag and 2 smaller standard paper bags), 1 sheet of white 8 ½” x 11” typing paper, a few sheets of newspaper, a pair of scissors and a hot glue gun or some craft glue. Any additional materials will be up to you, depending on how elaborate you want the presentation of your finished turkey to be.

Your turkey will be made of just three easy pieces: one big bag for the body, and the two smaller bags to serve as the “drumsticks.”

Making a paper bag turkey only takes a few minutes from start to finish, leaving you with plenty of time in your day to finish playing, decorating or tackling other crafting projects.

2. Form the body of the turkey. Take the large paper bag and fill it ¾ full with crumpled newspaper. This will help fill out the body, giving it a plump appearance and preventing it from collapsing once it's ready to be displayed. After the bag has been stuffed, fold the corners down diagonally and glue them in place. Tuck the folded tab down one more time and glue it to the underside of the turkey.

Shape the body of the turkey by hand until it’s smooth and round. Be sure to work out any square edges of creases from the original bag.

Be careful not to tear the bag while sealing or shaping it.

3. Shape the drumsticks. Grab the two smaller paper bags—you’ll be using these to craft the “drumsticks” of the turkey. Make one hand into a fist and stick it into each bag, molding the opening of the bag around your wrist. This will give the bag its recognizable drumstick shape. Remove your hand from the bag and fill the rounded end with newspaper. Twist the opening of each bag shut and secure it with a dab of glue.

Like the body of the turkey, the drumsticks will need to be filled in order to hold their shape.

4. Cut the booties for the drumsticks. Your drumsticks aren’t complete until they’re dressed with a pair of frilly white booties, like a traditional Thanksgiving turkey. Cut your sheet of typing paper in half lengthwise, then fold each piece in half, again lengthwise. Use your scissors to make a series of cuts in the open edge of the paper to create a neat fringe.

Try to make your cuts about ¼ inch apart.

Your cuts only need to be about half the width of the paper.

5. Put it all together. Wrap a paper bootie around the end of each drumstick and secure them with glue. Then, place the drumsticks on either side of the sealed end of the turkey and glue them down. That’s it! The result is a quirky, lifelike baked bird that you might just mistake for the real thing.

Attach the drumsticks to the tapered sides of the body where you folded down the edges of the big bag. This will give the turkey a more realistic look.

The different parts of the turkey will have a little weight to them once they’ve been filled. Use enough glue to make sure that everything holds.

Part 2 Finding Creative Ways to Present Your Turkey.

1. Put it on a platter. Arrange your paper bag turkey on a serving platter over a bed of parsley or tissue paper garnish. Surround the turkey with fallen leaves for a splash of vibrant color. With the right details, you’ll have a mouthwatering craft turkey worthy of a fantasy feast to show off to your friends and family.

If you don't have a real serving platter lying around, make your own out of cardboard, construction paper, and colored markers.

Make sure to let everyone, especially small children, know that your paper turkey is not for eating.

2. Add colorful designs. Before you fill the paper bags, decorate the outsides for a more artistic, funky finish. Use crayons, markers, washable paint, stickers or glitter and customize your turkey with polka dots, swirls or dazzling patterns using your favorite colors. Grab a friend, sibling, parent or child to decorate your turkey with, then compare and display them together when you’re done.

If you’re using paint or a felt-tip marker that might saturate the paper bags, allow them to dry before stuffing or shaping them.

When making paper turkeys with your kids or students, have them write down one thing they’re thankful for somewhere on the big bag.

3. Fill it with “stuffing.” For an unexpected tasty twist, ditch the newspaper and fill your turkey with popcorn, candy or other easy-to-eat finger foods instead. You can then have someone “carve” the turkey by cutting a flap in the top and have something to snack on until the main course is served. This imaginative serving style is sure to be a hit at holiday parties!

Popcorn makes a simple stuffing because it’s light and takes up a lot of space, but you could use just about any snack food, like chips, pretzels or chocolates, to fill your turkey.

Try filling the drumsticks separately with caramel corn to make “dark meat.”[6]

4. Put your paper bag turkey on display. In addition to being a fun and easy project to do with your friends or loved ones, your paper turkey will make a unique arrangement for the coffee table, arts and crafts desk or kitchen counter. It will look especially good surrounded by other festive Fall decorations. Best of all, you can store the playful papercraft away or simply make a new one the next time the holiday season rolls around.

A paper bag turkey will fit nicely with other homemade holiday decorations, such as hand turkey cutouts, popsicle stick snowflakes, and construction paper pumpkins.

Tips.

This will make a great activity for parents and teachers to do alongside their children or students.

If the paper bags you’re using have any logos, writings or markings on them, carefully turn them inside out before you begin crafting.

Line the inside of your turkey with wax or parchment paper to prevent splotchy grease stains if you plan on filling it with buttered popcorn.

Make sure you have enough of whatever food item you choose to fill the large bag.

Hot glue is preferable to other adhesives because it dries quickly and creates a strong, lasting hold.

Warnings.

Take caution when working with the hot glue and scissors. Kids should ask an adult for help with the cutting and gluing portions of the project.

Staples should be avoided, as there's no way to use them to secure the different parts of the turkey without mashing them.

Things You'll Need.

3 brown paper bags (1 large and 2 small).

1 sheet white typing paper.

A few sheets of crumpled newspaper.

Scissors.

Hot glue or craft glue.

Popcorn or other small snack foods (optional).

Various decorating supplies (optional).


Januari 27, 2020


How to Make a Polymer Clay Penguin.

There's no denying that penguins are among the cutest critters to populate this planet. Unfortunately, having a real one might be out of the question for most people. Luckily, it is possible to make a miniature penguin out of polymer clay. You can even insert a small eyehook or eye pin to turn it into a charm so that you can take it wherever you go!

Method 1 Making a Basic Penguin.

1. Make the body of the penguin. Knead some black clay until it turns soft. Roll it into an oval, about twice the height of your thumbnail. Flatten one of the oval's pointy ends against your work surface until it can stand on its own.

2. Make the head of the penguin. Roll some black clay into a small ball, about the same size as your thumbnail, or half the height of the body.

3. Attach the head to the body. Gently press the head on top of the penguin's body. Don't worry if the head squishes a little. If you'd like, you can use a clay sculpting tool to smooth the seam between the head and the body.

4. Roll some white clay out into a thin sheet. Clean your hands first, then knead some white clay until it turns soft. Roll the clay into a thin sheet using an acrylic rolling pin or tube. You can find acrylic rolling pins in the polymer clay aisle of an arts and crafts store.

If you can't find any acrylic rolling pins, you can use a regular rolling pin, a fat marker, or any other smooth cylinder.

5. Cut an oval and a heart out of the white clay. The oval will make the belly and the heart will make the face. Both need to be a little smaller than the body and head respectively. You can use mini polymer clay cutters for this; they look like miniature cookie cutters. You can also cut the shapes freehand with a craft blade instead.

6. Stick the white shapes onto the body and head. Gently press the white heart onto the head, and the white oval onto the body. Make sure that the bottom of the heart and the top of the oval go into the crease between the head and body.

7. Roll some black clay into a thick sheet. Clean your hands again, and knead some more black clay until it turns soft. Roll the clay into a thick, black sheet. Plan on making it twice as thick as the white sheet. This will eventually make the wings.

8. Cut two wings out of the sheet. Start by cutting an oval out of the clay, a little bit shorter than the body. Cut the oval in half, lengthwise, so that you end up with two semi-ovals. You can use a craft blade to do this.

9. Add the wings onto the penguin's body. Gently press the wings down onto the body to either side of the white belly. The flat edges of the wings should be facing the white belly. The tips of the wings should be nestled into the crease between the head and the body.

Don't worry if the wings overlap the white belly a little.

Consider flipping the bottom of the wings outwards for a cute touch.

10. Make a beak. Clean your hands, and knead some orange clay. Roll the clay into a tiny teardrop or cone.

11. Attach the beak. Press the bottom of the teardrop/cone into the middle of the penguin's face.[4] Use a craft blade to cut the beak open after you attach it, if desired. This will give your penguin an open mouth instead of a closed one.

12. Make the feet. Roll a small ball out of orange clay. Cut the ball in half using a craft blade. Cut two notches into each dome to make the feet.

13. Attach the feet. Turn the penguin upside down. Pinch the back of both feet, then press them into the base of the body. Make sure that the front of the feet (the notched parts) stick out from under the body. Place the penguin right-side-up against the table, and adjust the feet, if needed.

14. Consider inserting an eyehook. If you wish to turn this penguin into a charm, press a jewelry eyehook through the top of the head and into the body. If the hook is very long, trim it down first using a pair of wire cutters.

15. Bake the penguin according to the manufacturer's baking times and temperatures. Turn on your oven, and let it reach the recommended temperature, usually between 215 to 325°F (102 to 163°C). Place the penguin on a foil-lined baking sheet, and bake it for the recommended time, typically 15 to 20 minutes.

Each company will be a little different, so you will need to read the label on the clay's wrapper.

If your penguin has a lot of fingerprints on it, gently brush it with a soft-bristled paintbrush before you bake it.

16. Allow the penguin to cool before adding the eyes. Use a black permanent marker to draw two dots on the penguin's face, right above the beak. Position them in the loops of the "heart". You can also use a thin brush and acrylic paint.

17. Glaze the penguin, if desired. If you wish to make the penguin shiny, get some glaze meant for polymer clay. Paint the penguin with the glaze, then let the glaze dry.[9] Refer to the label on the bottle, as each brand's drying times will vary.

Method 2 Making a Penguin Charm.

1. Shape the body. Knead some polymer clay until it softens, then roll it into an oval. Flatten the oval with a glass so that you get a disk shape. Cut off one of the pointy ends of the oval, so that the penguin can stand upright.

Penguins are typically black, but since you are making a cute penguin, you can make him or her any color you want! Pink, baby blue, or light purple would be especially cute!

2. Roll some white clay into a thin sheet. Clean your hands first to avoid transferring color, then knead some white clay until it softens. Roll it into a thin sheet using an acrylic rolling pin. You can find it in the polymer clay aisle of an arts and crafts store.

If you can't find an acrylic rolling pin, you can use another smooth cylinder, such as a fat marker or a rolling pin.

3. Cut an "m" shape out of the sheet. This will make the body and face of your penguin. It needs to be the width as body, but a little shorter. Use a craft blade to cut the shape out.

4. Press the white "m" onto body. Be sure to match up the base of the "m" with the base of the body. You will have a slight gap between the top of the "m" and the top of the body.

5. Make a beak. Clean your hands, then knead some orange clay until it turns soft. Press it into a thin disk, then cut a small triangle out of it using a craft blade.

6. Attach the beak. Press the triangle into the middle of the white part on the body. Make sure that the pointed tip of the triangle is pointing downward.

7. Add some eyes. Roll two small balls out of black clay. Press each ball onto the penguin to either side of the beak. They should just barely be touching the upper corners of the bead.

If you don't have any black clay, you can skip this step, and paint the eyes on instead after you are done baking.

8. Insert an eyehook into the top of the penguin. Measure the eyehook against the penguin first. If it is too long, trim it down with a pair of wire cutters. Push the eyehook down through the top of the penguin.

9. Bake the penguin. Preheat your oven to the temperature specified by the manufacturer, typically between 215 to 325°F (102 to 163°C). Place your penguin onto a foil-liked baking sheet. Bake the penguin for the time recommended by the manufacturer, typically 15 to 20 minutes.

Each brand of clay will have different baking times and temperatures. Read the label on the clay's wrapper carefully.

If the eyehook is still look, put a little superglue around the seam.

10. Paint some feet onto the penguin once it cools. After the penguin is done baking, take it out of the oven and let it cool. Use a thin paintbrush and some orange, acrylic paint to add two small v's at the bottom of the penguin. If you don't have any paint at home, you can use an orange permanent marker instead.

11. Glaze the penguin, if desired. Get some glaze meant for polymer clay. Thread some string through the eyehook and tie it into a loop. Dip the penguin into the glaze, then lift it out. Let the excess glaze drip off, then hang the penguin by the loop so that it can dry.

Place a sheet of scrap paper under the penguin as it is drying to catch any excess glaze.

Tips.

You can bake your penguin in a convection over, regular oven, or toaster oven.

Most polymer clays bake at 215 to 325°F (102 to 163°C).

If the clay becomes too soft and squishy, set it aside until it becomes firmer. You can also put it into the fridge for a few minutes instead.

Clean your hands with baby wipes between colors. This keeps your fingers from accidentally transferring color between the clay pieces.

Gently brush the clay with a soft-bristled paintbrush after you are done sculpting, but before baking. This will help remove fingerprints.

You can make your penguin any color your want. Consider switching out the black for light blue, pink, or light purple.

If the clay is too hard to work with, knead it between your hands for a few minutes first.

If the clay is still too hard, add some clay softener into it. It is usually sold alongside the rest of the polymer clay.

Avoid mixing different polymer clay brands, as they tend to require different baking temperatures.

Glaze the penguin when you are done. You can apply the glaze with a paintbrush, and let it dry. If you added an eyehook, use the pin to dip the penguin into the glaze.



Warnings.

Do not bake your penguin in the microwave.



Things You'll Need

Making a Basic Penguin.

Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin, Oven.

Baking sheet, Aluminum foil, Black permanent marker or acrylic paint, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).



Making a Penguin Charm.

Polymer clay, any color (for body), Black polymer clay, White polymer clay, Orange polymer clay, Craft blade, Acrylic rolling pin.

Oven, Baking sheet, Aluminum foil, Orange acrylic paint, Thin paintbrush, Polymer clay glaze (optional), Eyehook or eye pin (optional, for charm).




Januari 25, 2020


easy kid craft


One of the #1 things that people often say to me is, “I would love to make creative projects with my kids, but I’m just not crafty. I don’t even know where to start!” My reply is always, “Trust me, you do NOT need to consider yourself ‘crafty’ to start getting creative with your children!”  There are hundreds upon hundreds of craft projects that you can make with your children that require NO special skills or tools and that take less than half an hour of your time. In fact, most of these 50+ quick and easy kids craft project ideas that I’ve rounded up here actually take less than FIFTEEN minutes to make!



WHY CRAFT WITH YOUR KIDS?

A recent study by Dr. Richard Rende revealed that creative interaction between parents and young children engaging in activities like arts and crafts not only provides immediate and lasting cognitive benefits but also creates a unique bonding experience, which creates lifelong memories. Taking time to be creative with your children is a topic that I am incredibly passionate about. I know firsthand the benefits that children reap when they are exposed to arts and crafts activities, and in an age where arts are in a decline in the school systems, it is even more important than ever for parents to take the initiative to introduce art activities to their children.



Other key findings of Dr. Rende’s study showed that:



• Arts and crafts engage multiple brain areas simultaneously and

improve bilateral coordination between the left and right sides of

the brain, leading to immediate and future cognitive development.



• Activities like arts and crafts accelerate the development of muscles

in the hands and fingers, improving fine motor skills that are

essential for school success in the earliest formal years.



• Face-to-face interaction in the early years is critical for optimal

social development.



• Arts and crafts promote rich social interactions that help develop

language skills and social cognitive abilities like understanding

emotions.



• Creative activities are a great way to bond with children and create

lasting memories.



Nearly 90% of the parents surveyed for the study said that they would like to spend more time creating arts and crafts with their children, but they didn’t know where to start or how to carve out the time needed.



Visit us https://easycraftsideasforthehome.blogspot.com/



Note :

Acknowledgements

This presentation contains images that were used under a Creative Commons Licence. Please contact us if it yours. We will delete it.





craft handmade, 5 minute craft, craft game, craft paper, craft meaning, craft apk, craft ideas, craft indonesia, diy craft paper, diy craft tutorial, diy craft youtube, diy craft indonesia, diy craft wood, diy craft room, diy crafts to sell, diy creative
November 01, 2019




How to Make a Jack in the Box.



A Jack in the Box is a fun toy that's been around for hundreds of years. While it may seem complex, a Jack in the Box actually works with very simple mechanics. Making your own can be a fun arts and crafts activity. With some cardboard, glue, magnets, a spring, and a few other parts, you can make your very own Jack in the Box.







Part 1 Constructing the Box.



Find a sturdy piece of cardboard. You'll need a thick and sturdy piece of cardboard for the box to support itself. The kind from a large packing box should work well.

You'll be cutting out 6 squares that are each 6" x 6" (15 cm x 15 cm), so your piece of cardboard will need to be at least 18" x 12" (45 cm x 30). If you can't find a piece that big, then several pieces will work fine too.



Draw six 6" X 6" (15 cm x 15 cm) boxes on the piece of cardboard. These six squares will form the walls, floor, and lid of your Jack in the Box. Use a ruler to measure and make sure your lines are straight.

Make sure you use a dark pen or marker. Otherwise, you may not be able to see your lines when you cut.



Cut out each box. Use a pair of sharp scissors or a box cutter. Carefully cut along the lines you drew so the cardboard squares are the right size. If you're using a box cutter, make sure the cardboard is placed on a solid surface.

Wear gloves during this step to prevent paper cuts or any injuries for the scissors or box cutter.



Glue 4 of the squares together, making a cube with no top or bottom. Hot glue is the best choice for this step. White glue won't be strong enough to keep the box together. This forms the outside structure of the box.

Glue the edges of the cardboard together to form the cube. If the glue doesn't seem to be making a strong seal, you can use strips of tape to secure the cube while the glue hardens.



Glue another square to the bottom of the cube. Line up the square perfectly with the rest of the cube or your box will be uneven. This will form the floor of the box.

Lay the square down flat and put glue around the edge. Then slowly lower the box onto the square, making sure the glue makes contact with all edges of the box.



Make a hinge with the final square. Don't glue the final square to the box, or your Jack in the Box won't open. Instead, rest the square on top of the box, making sure to line up all the sides. Then, use a strip of tape to fasten one side of the square to the box. This will form a simple hinge that allows your box to open.

Clear tape is the best choice here. Colored tape might throw off your designs when you decorate your box later on.







Part 2 Sealing the Box.



Find 2 small magnets. There are lots of ways you could make the seal for your box, but a simple method uses magnets. Start by finding 2 magnets. These should be square or circle and small, not more than 1 inch (2.5 cm) long.

Craft or hardware stores usually have small magnets that are meant to hold boxes or cabinets closed. Looking for these should give you a good start.

Remember to find out which sides of the magnets attract each other. Those are the two sides you'll line up when making your seal.



Glue one magnet to the bottom of the box's lid. This should be on the opposite side where you placed the tape. On the edge of the lid and in the center, glue the first magnet.



Glue another magnet directly under the first magnet. The next magnet should be placed on the inside wall of the box so the two magnets touch each other when the lid is closed. In this position, they will attract each other and keep the box sealed.

To find the right position for the second magnet, start by closing the box slowly. This way you'll be able to see where the magnet will rest when the box is sealed. The best place for the second magnet is right under that point, so the two magnets touch when the lid is closed.



Test out your seal. See if your seal is holding after you glue both magnets. Pull up slightly to see how tight the seal is. Flip the box upside down and see if it holds.







Part 3 Making the Spring Puppet.



Glue a compression spring to the bottom of the box. Draw a circle in the middle of the box's floor to see where you'll place the spring. Then put glue on the bottom of the spring and place it over the circle you drew. Hold the spring down for a few seconds to make sure the glue seals.

Compression springs come in lots of sizes. For this project, you'll want one that's slightly taller than the box, or about 7 inches (18 cm). Your local craft store should have plenty of options.

Test the seal by making sure the box stays closed when the spring is in place. If the box doesn't stay closed, your spring is too big or your seal is too loose.



Put a sock puppet on the spring. Your Jack in the Box needs a character to pop out! A sock puppet is perfect because it can fit snugly over the spring.

You could also draw and cut out a simple face from a piece of paper and glue it to the top of the spring for a simpler design.



Test your box. With all the pieces in place, it's time to make sure your box is working! Put it on a table and lift up the lid. Your puppet should pop out of the box when you do this.



Decorate your box. Now that your box is complete, you can decorate it however you want! Use markers to draw on its sides, glue sparkly paper over it, cover it with stickers--use your imagination!





Tips.

Remember to let all glue dry before you move on. Wait a few minutes after you glue pieces together to make sure the glue holds or your box could warp as you work.



Things You'll Need.

Cardboard.

Hot glue.

Scissors.

Ruler.

Clear tape.

Gloves.

Pen or marker.

Compression spring.

Magnets
November 18, 2019